Hello. In our configuration process, it is not clear where the policer speed limit is on the inbound flow rate or the output direction speed limit on the interface. If it is in the direction, it would like to configure how the speed limit of the output direction should be configured. set int state GigabitEthernet1/0/0 up set int state GigabitEthernet2/0/0 up set int ip address GigabitEthernet1/0/0 1.1.1.1/24 set int ip address GigabitEthernet2/0/0 2.1.1.1/24 classify table table-index 0 mask l3 ip4 dst configure policer name test cir 100 cb 50 rate kbps conform-action transmit classify session policer-hit-next test table-index 0 match l3 ip4 dst 1.1.1.2 set policer classify interface GigabitEthernet2/0/0 ip4-table 0
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#9626): https://lists.fd.io/g/vpp-dev/message/9626 Mute This Topic: https://lists.fd.io/mt/22294608/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-