Re: [Vyatta-users] DHCP relay in vif interfaces (vc3)
Thanks Marat, I will try it asap. Marat Nepomnyashy wrote: Hi Sergio, There is a limitation in the VC3 release in that only 'ethX' values can be specified for DHCP relay interfaces. This is due to overly stringent validation checks. I just opened a new bug on this: https://bugzilla.vyatta.com/show_bug.cgi?id=2473 A temporary work-around can be implemented using the attachments just added to Bug 2473. There is the attachment id 238 that should be copied over the runtime file '/opt/vyatta/share/xorp/templates/rl_dhcp.tp' on your router. You will also need to apply the patch in attachment id 239 to the runtime script file '/opt/vyatta/sbin/dhcrelay-starter.pl' to disable another validation check. You will have to reboot the router for the validation checks removals to take effect, so make sure you're running off a disk rather than CDROM, or the changes will be lost. Hope this works for now, -- Marat - Original Message - From: Sergio Garcia [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 14, 2007 4:34 AM Subject: [Vyatta-users] DHCP relay in vif interfaces (vc3) Hi all. I hope you can help me with this doubt :) I want to relay dhcp requests incoming from tree eth1 vif's to a dhcp server but Vyatta VC3 only allows me to select ethX interfaces (X goes from 0 to 23). Is it possible to do this? Launching dhcrelay manually is not a good solution, but if it is the only way I will accept. Thanks in advance ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users -- This mail has been sent through DS2 mail server ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
[Vyatta-users] DHCP relay in vif interfaces (vc3)
Hi all. I hope you can help me with this doubt :) I want to relay dhcp requests incoming from tree eth1 vif's to a dhcp server but Vyatta VC3 only allows me to select ethX interfaces (X goes from 0 to 23). Is it possible to do this? Launching dhcrelay manually is not a good solution, but if it is the only way I will accept. Thanks in advance ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
Re: [Vyatta-users] DHCP relay in vif interfaces (vc3)
Hi Sergio, There is a limitation in the VC3 release in that only 'ethX' values can be specified for DHCP relay interfaces. This is due to overly stringent validation checks. I just opened a new bug on this: https://bugzilla.vyatta.com/show_bug.cgi?id=2473 A temporary work-around can be implemented using the attachments just added to Bug 2473. There is the attachment id 238 that should be copied over the runtime file '/opt/vyatta/share/xorp/templates/rl_dhcp.tp' on your router. You will also need to apply the patch in attachment id 239 to the runtime script file '/opt/vyatta/sbin/dhcrelay-starter.pl' to disable another validation check. You will have to reboot the router for the validation checks removals to take effect, so make sure you're running off a disk rather than CDROM, or the changes will be lost. Hope this works for now, -- Marat - Original Message - From: Sergio Garcia [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 14, 2007 4:34 AM Subject: [Vyatta-users] DHCP relay in vif interfaces (vc3) Hi all. I hope you can help me with this doubt :) I want to relay dhcp requests incoming from tree eth1 vif's to a dhcp server but Vyatta VC3 only allows me to select ethX interfaces (X goes from 0 to 23). Is it possible to do this? Launching dhcrelay manually is not a good solution, but if it is the only way I will accept. Thanks in advance ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
