Re: [Vyatta-users] Installation Problem - booting hangs
Thanks all for your help. The HDD is already a IDE-HDD, a 2,5 60GB. Just for fault-searching I tried also an SATA HDD but without success. But I agreed, the strange hardware might be the probleme here. I will be back on Monday on work to try some more steps to get Vyatta working. On other hardware / in VM all works ok, but not on the small Celeron / intel board. On Friday I already had a deeper look on GRUB, but so far I didn't find any problems there. Will send more updates on Monday. Greetings and have a nice weekend. Stefan -Ursprüngliche Nachricht- Von: Brody Mulry [mailto:[EMAIL PROTECTED] Gesendet: Samstag, 9. Februar 2008 01:49 An: [EMAIL PROTECTED] Cc: vyatta-users@mailman.vyatta.com Betreff: Installation Problem - booting hangs Stefan, I had the same issue agpgart: Unuspported SiS chipset on an Intel Celeron 420 - SiS 9xx. I resolved the issue; I had to use an IDE HDD for VYATTA. Also for stability (occasionally had Kernel Panics) had to go through the BIOS and disable almost everything that used IRQ's. Due to the 'OEM specific' BIOS version I had, I was unable to set the IRQ's manually. Com Ports (leave one, otherwise you receive a linux notification every 5 mins) Soundcard Onboard LAN - Did not work anyhow USB ..etc. I did leave ACPI as it made no difference. The VYATTA router works fine now! I believe it has something to do with the SiS 9xx version I had not being completely supported. I could have recompiled the 'new' SiS linux driver from the SiS website, but I prefer 'stock' VYATTA Distros (for troubleshooting) Hope this helps. - Brody ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
[Vyatta-users] Installation Problem - booting hangs
Hello List, trying to install Vyatta community edition 3, installation suceeded ok, but booting hangs: GRUB Loading stage1.5 GRUB loading, please wait. Then nothing more happens. I tried following things: loaded new image and installed from this. tried different harddisks SATA and PATA. before install-system, I tried dd /dev/zero /dev/hda count=1, but doesnt't help. Hardware is a small Barebone-PC with SIS964, Intel Celeron 220, 512 MB RAM. Found some strange messages in /var/log/messages, when booting again from CD. vyatta kernel: copy_e820_map() start ... size 09fc00 end 9fc00 type: 1 Enabling APIC mode: Flat: Using 0 I/O APICs BIOS bug, no explicit IRQ entries using default mptable Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 hdb: _NEC DV-5800, Atapi CD/DVD-ROM ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14 ATA: abnormal status 0x7F on port 0x2367 Registering unionfs 2.0 agpgart: Unuspported SiS chipset (device id: 0662) Any tips or information ? -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
Re: [Vyatta-users] Installation Problem - booting hangs
One other thing to look into... Make sure you're not using the RAID functionality of the SIS964. Robert Bays wrote: Stefan, Looks like grub isn't loading stage 1.5. One thing to check... In the BIOS there may be a setting that switches the disk mode from normal to LBA. It should be set to LBA... Cheers, Robert. Stefan Leippert wrote: Hello List, trying to install Vyatta community edition 3, installation suceeded ok, but booting hangs: GRUB Loading stage1.5 GRUB loading, please wait. Then nothing more happens. I tried following things: loaded new image and installed from this. tried different harddisks SATA and PATA. before install-system, I tried dd /dev/zero /dev/hda count=1, but doesnt't help. Hardware is a small Barebone-PC with SIS964, Intel Celeron 220, 512 MB RAM. Found some strange messages in /var/log/messages, when booting again from CD. vyatta kernel: copy_e820_map() start ... size 09fc00 end 9fc00 type: 1 Enabling APIC mode: Flat: Using 0 I/O APICs BIOS bug, no explicit IRQ entries using default mptable Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 hdb: _NEC DV-5800, Atapi CD/DVD-ROM ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14 ATA: abnormal status 0x7F on port 0x2367 Registering unionfs 2.0 agpgart: Unuspported SiS chipset (device id: 0662) Any tips or information ? ___ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users