Some initial troubleshooting steps ...
1. Is the link light on on the switch/hub?
If not then the card, the cable or the switch is stuffed - swap each one
until the link light comes on
2. Is the IP address on the EZ card in the same subnet as the other 2
computers?
If not, change the IP address so all are on the same subnet ** Make sure the
isolated subnet is not the same (or doesn't overlap with ) the Internet
subnet ie. The on board Ethernet interface IP address
3. When you say the other 2 computers can talk to one another do you mean
over IP or Appletalk?
If it is Appletalk, can they ping each other? If not, then IP is working.
Try this for a start
Cheers
Greg
> From: Malcolm McCallum <[EMAIL PROTECTED]>
> Date: Tue, 2 Sep 2003 15:23:35 +0800
> To: "WAMUG Mailing List"
> Subject: Fwd: EZ Card 10/100
>
>>
>> Hi , I have a problem :-(. I have a 2nd ethernet card (PCI) in my
>> (Server) Beige G3 which Matt found a driver for and installed it so I
>> am isolated from the net. :-) Well my net work has stopped working
>> and I cannot trouble shoot it.
>> 1. Two computers on the LAN can still talk to one another,but not to
>> the G3 or get on .
>> net.
>> 2. My G3 can still connect to the internet,but cannot see the other
>> two computers.
>> 3. The EZ 10/100 still shows up on prefs.
>> 4. Have checked all the cable connections.
>> 5. The G3 does not have to go into the 8/DTE socket does it.( It is
>> into one of the other 8 sockets.)
>>
> I do not know where to start looking next,can someone point me in the
> right direction as I have a very frustrated 'er indoors' who cannot get
> onto the net.
>> Mac
>>
>
>
> -- The WA Macintosh User Group Mailing List --
> Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
> Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
> Unsubscribe - <mailto:[EMAIL PROTECTED]>
>
> WAMUG is powered by Stalker CommuniGatePro
>
