[weewx-user] Re: meteostick driver issues with wind direction and wee_device
Thanks Luc ! Op dinsdag 11 april 2017 05:53:48 UTC+2 schreef Luc Heijst: > > Hi Sef, > txBatteryStatus contain 0 for ISS battery OK and 1 for ISS battery low. > There is no data of the ISS battery voltage. The supercap voltage can only > be received from a Vantage Vue. > Luc -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: v3.7.1 - WMR 300 - WeeWxIOError: [Errno 110]
Hello Matthew, Tried without success. Log attached. Thank you. On Tuesday, April 11, 2017 at 9:44:41 PM UTC+2, mwall wrote: > > miguel, > > please try the attached wmr300-0.19rc2.py and post the log > > m > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. Apr 11 22:08:53 dante kernel: [ 1049.193235] usb 1-4: new full-speed USB device number 4 using xhci_hcd Apr 11 22:08:53 dante kernel: [ 1049.337247] usb 1-4: New USB device found, idVendor=0fde, idProduct=ca08 Apr 11 22:08:53 dante kernel: [ 1049.337263] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 11 22:08:53 dante kernel: [ 1049.337272] usb 1-4: Product: USB HID Bootloader Apr 11 22:08:53 dante kernel: [ 1049.337282] usb 1-4: Manufacturer: Microchip Technology Inc. Apr 11 22:08:53 dante mtp-probe: checking bus 1, device 4: "/sys/devices/pci:00/:00:14.0/usb1/1-4" Apr 11 22:08:53 dante mtp-probe: bus: 1, device: 4 was not an MTP device Apr 11 22:08:53 dante kernel: [ 1049.395615] usbcore: registered new interface driver usbhid Apr 11 22:08:53 dante kernel: [ 1049.395622] usbhid: USB HID core driver Apr 11 22:08:53 dante kernel: [ 1049.413440] hid-generic 0003:0FDE:CA08.0001: hiddev0,hidraw0: USB HID v1.11 Device [Microchip Technology Inc. USB HID Bootloader] on usb-:00:14.0-4/input0 Apr 11 22:10:04 dante systemd[1]: Starting LSB: weewx weather system... Apr 11 22:10:04 dante weewx[1306]: * Starting weewx weather system weewx Apr 11 22:10:04 dante weewx[1317]: engine: Initializing weewx version 3.7.1 Apr 11 22:10:04 dante weewx[1317]: engine: Using Python 2.7.12 (default, Nov 19 2016, 06:48:10) #012[GCC 5.4.0 20160609] Apr 11 22:10:04 dante weewx[1317]: engine: Platform Linux-4.8.0-46-generic-x86_64-with-Ubuntu-16.04-xenial Apr 11 22:10:04 dante weewx[1317]: engine: Locale is 'LC_CTYPE=en_US.UTF-8;LC_NUMERIC=es_ES.UTF-8;LC_TIME=es_ES.UTF-8;LC_COLLATE=en_US.UTF-8;LC_MONETARY=es_ES.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=es_ES.UTF-8;LC_NAME=es_ES.UTF-8;LC_ADDRESS=es_ES.UTF-8;LC_TELEPHONE=es_ES.UTF-8;LC_MEASUREMENT=es_ES.UTF-8;LC_IDENTIFICATION=es_ES.UTF-8' Apr 11 22:10:04 dante weewx[1317]: engine: pid file is /var/run/weewx.pid Apr 11 22:10:04 dante weewx[1306]:...done. Apr 11 22:10:04 dante systemd[1]: Started LSB: weewx weather system. Apr 11 22:10:04 dante weewx[1321]: engine: Using configuration file /home/weewx/weewx.conf Apr 11 22:10:04 dante weewx[1321]: engine: debug is 1 Apr 11 22:10:04 dante weewx[1321]: engine: Initializing engine Apr 11 22:10:04 dante weewx[1321]: engine: Loading station type WMR300 (weewx.drivers.wmr300) Apr 11 22:10:04 dante weewx[1321]: wmr300: driver version is 0.19rc2 Apr 11 22:10:04 dante weewx[1321]: wmr300: usb info: pyusb_version=1.0.0b2 Apr 11 22:10:04 dante weewx[1321]: wmr300: sensor map is {'outHumidity': 'humidity_1', 'extraDewpoint6': 'dewpoint_7', 'windchill': 'windchill', 'extraDewpoint4': 'dewpoint_5', 'rainRate': 'rain_rate', 'heatindex': 'heatindex_1', 'inTemp': 'temperature_0', 'windGustDir': 'wind_gust_dir', 'extraDewpoint2': 'dewpoint_3', 'extraDewpoint3': 'dewpoint_4', 'extraDewpoint1': 'dewpoint_2', 'barometer': 'barometer', 'extraDewpoint7': 'dewpoint_8', 'dewpoint': 'dewpoint_1', 'extraDewpoint5': 'dewpoint_6', 'extraHumid6': 'humidity_7', 'pressure': 'pressure', 'extraHumid4': 'humidity_5', 'extraHumid5': 'humidity_6', 'extraHumid2': 'humidity_3', 'extraHumid3': 'humidity_4', 'extraHumid1': 'humidity_2', 'extraTemp6': 'temperature_7', 'extraTemp7': 'temperature_8', 'extraTemp4': 'temperature_5', 'extraTemp5': 'temperature_6', 'extraTemp2': 'temperature_3', 'extraTemp3': 'temperature_4', 'extraTemp1': 'temperature_2', 'extraHeatindex3': 'heatindex_4', 'extraHeatindex2': 'heatindex_3', 'extraHeatindex1': 'heatindex_2', 'extraHeatindex7': 'heatindex_8', 'extraHeatindex6': 'heatindex_7', 'extraHeatindex5': 'heatindex_6', 'extraHumid7': 'humidity_8', 'extraHeatindex4': 'heatindex_5', 'windDir': 'wind_dir', 'outTemp': 'temperature_1', 'windSpeed': 'wind_avg', 'inHumidity': 'humidity_0', 'windGust': 'wind_gust'} Apr 11 22:10:05 dante weewx[1321]: wmr300: Found station at bus= device= Apr 11 22:10:05 dante kernel: [ 1121.059743] usb 1-4: reset full-speed USB device number 4 using xhci_hcd Apr 11 22:10:05 dante weewx[1321]: engine: Loading service weewx.engine.StdTimeSynch Apr 11 22:10:05 dante weewx[1321]: engine: Finished loading service weewx.engine.StdTimeSynch Apr 11 22:10:05 dante weewx[1321]: engine: Loading service weewx.engine.StdConvert Apr 11 22:10:05 dante weewx[1321]: engine: StdConvert target unit is 0x1 Apr 11 22:10:05 dante weewx[1321]: engine: Finished loading service weewx.engine.StdConvert Apr 11 22:10:05 dante weewx[1321]: engine: Loading service weewx.engine.StdCalibrate Apr
[weewx-user] Re: sdr drive Acurite 5-in-1 rain doesn't seem to be reporting - preliminary
Thank you for your reply. The problem was that I had not included [[deltas]] rain = rain_total In my defense, [[deltas]] wasn't mentioned in the README. I found it in the sdr.py file itself. Nine tips of the bucket just produced "rain" of 0.0694 It seems obvious in retrospect that this was needed. On Tuesday, April 11, 2017 at 1:16:00 PM UTC-4, mwall wrote: > > On Tuesday, April 11, 2017 at 12:40:16 PM UTC-4, Craig Thom wrote: >> >> My display shows 0.38" of rain today. >> >> rtl_433 show an increase of raincounter_raw from 704 to 734 while I was >> away (at 0.01" per tick that's 0.3", but "rainfall_accumulation" is still >> 0. >> > > the sdr driver only looks for raincounter_raw > > please run weewxd directly, then tip the rain bucket. post the LOOP/REC > data from before and after the bucket tip. > > also post the [SDR] stanza from your weewx configuration. > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: v3.7.1 - WMR 300 - WeeWxIOError: [Errno 110]
miguel, please try the attached wmr300-0.19rc2.py and post the log m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. #!/usr/bin/env python # Copyright 2015 Matthew Wall # See the file LICENSE.txt for your rights. # # Credits: # Thanks to Benji for the identification and decoding of 7 packet types # # Thanks to Eric G for posting USB captures and providing hardware for testing # https://groups.google.com/forum/#!topic/weewx-development/5R1ahy2NFsk # # Thanks to Zahlii # https://bsweather.myworkbook.de/category/weather-software/ # # No thanks to oregon scientific - repeated requests for hardware and/or # specifications resulted in no response at all. # TODO: figure out battery level for each sensor # TODO: figure out signal strength for each sensor # TODO: figure out archive interval # FIXME: figure out unknown bytes in history packet # FIXME: decode the 0xdb packets # FIXME: the read/write logic is rather brittle. it appears that communication # must be initiated with an interrupt write. after that, the station will # spew data. this implementation starts with a read, which will fail with # a 'No data available' usb error. that results in an empty buffer (instead # of an exception popping up the stack) so that a heartbeat write is sent. # the genLoopPacket and genStartupRecords logic should be refactored to make # this behiavor explicit. # FIXME: deal with initial usb timeout when starting usb communications # FIXME: warn if altitude in pressure packet does not match weewx altitude """Driver for Oregon Scientific WMR300 weather stations. Sensor data transmission frequencies: wind: 2.5 to 3 seconds TH: 10 to 12 seconds rain: 20 to 24 seconds The station supports 1 wind, 1 rain, 1 UV, and up to 8 temperature/humidity sensors. Sniffing USB traffic shows all communication is interrupt. The endpoint descriptors for the device show this as well. Response timing is 1. The station ships with "Weather OS PRO" software for windows. This was used for the USB sniffing. Internal observation names use the convention name_with_specifier. These are mapped to the wview or other schema as needed with a configuration setting. For example, for the wview schema, wind_speed maps to windSpeed, temperature_0 maps to inTemp, and humidity_1 maps to outHumidity. Maximum value for rain counter is 400 in (10160 mm) (4 = 0x9c 0x40). The counter does not wrap; it must be reset when it hits maximum value otherwise rain data will not be recorded. Message types - packet types from station: 57 - station type/model; history count 41 - ACK D2 - history; 128 bytes D3 - temperature/humidity/dewpoint/heatindex; 61 bytes D4 - wind/windchill; 54 bytes D5 - rain; 40 bytes D6 - pressure; 46 bytes DB - forecast; 32 bytes DC - temperature/humidity ranges; 62 bytes packet types from host: A6 - heartbeat 41 - ACK 65 - ? each of these is ack-ed by the station cd - ? start history request? last two bytes are one after most recent read 35 - ? finish history request? last two bytes are latest record count 72 - ? 73 - ? notes: WOP sends A6 message every 20 seconds WOP requests history at startup, then again every 120 minutes each A6 is followed by a 57 from the station each data packet D* from the station is followed by an ack packet 41 from host D2 (history) records are recorded every minute D6 (pressure) packets seem to come every 15 minutes (900 seconds) 4,5 of 7x match 12,13 of 57 Message field decodings --- Values are stored in 1 to 3 bytes in big endian order. Negative numbers are stored as Two's Complement (if the first byte starts with F it is a negative number). no data: 7f ff values for channel number: 0 - console sensor 1 - sensor 1 2 - sensor 2 ... 8 - sensor 8 values for trend: 0 - steady 1 - rising 2 - falling bitwise transformation for compass direction: 1000 = NNW 0100 = NW 0010 = WNW 0001 = W 1000 = WSW 0100 = SW 0010 = SSW 0001 = S 1000 = SSE 0100 = SE 0010 = ESE 0001 = E 1000 = ENE 0100 = NE 0010 = NNE 0001 = N values for forecast: 0x08 - cloudy 0x0c - rainy 0x1e - partly cloudy 0x0e - partly cloudy at night 0x70 - sunny 0x00 - clear night Message decodings - message: ACK byte hex dec description decoded value 0 41 A acknowledgement ACK 1 43 C 2 4b K 3 73 4 e5 5 0a 6 26 7 0e 8 c1 ex
[weewx-user] Re: v3.7.1 - WMR 300 - WeeWxIOError: [Errno 110]
Hello, I've tried v3.7.1 on a laptop also running Ubuntu 16.04. It's a Dell Inspiron 3552 (Pentium N3700 - 4GB RAM). Same error is logged. Attached. I hope It can help. Thank you. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. Apr 11 18:52:53 cicero kernel: [ 1948.938871] usb 1-2.3: new full-speed USB device number 7 using xhci_hcd Apr 11 18:52:53 cicero kernel: [ 1949.043498] usb 1-2.3: New USB device found, idVendor=0fde, idProduct=ca08 Apr 11 18:52:53 cicero kernel: [ 1949.043515] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 11 18:52:53 cicero kernel: [ 1949.043526] usb 1-2.3: Product: USB HID Bootloader Apr 11 18:52:53 cicero kernel: [ 1949.043537] usb 1-2.3: Manufacturer: Microchip Technology Inc. Apr 11 18:52:53 cicero mtp-probe: checking bus 1, device 7: "/sys/devices/pci:00/:00:14.0/usb1/1-2/1-2.3" Apr 11 18:52:53 cicero mtp-probe: bus: 1, device: 7 was not an MTP device Apr 11 18:52:53 cicero kernel: [ 1949.129756] usbcore: registered new interface driver usbhid Apr 11 18:52:53 cicero kernel: [ 1949.129761] usbhid: USB HID core driver Apr 11 18:52:53 cicero kernel: [ 1949.181332] hid-generic 0003:0FDE:CA08.0002: hiddev0,hidraw1: USB HID v1.11 Device [Microchip Technology Inc. USB HID Bootloader] on usb-:00:14.0-2.3/input0 Apr 11 18:54:08 cicero weewx[10244]: engine: Initializing weewx version 3.7.1 Apr 11 18:54:08 cicero weewx[10244]: engine: Using Python 2.7.12 (default, Nov 19 2016, 06:48:10) #012[GCC 5.4.0 20160609] Apr 11 18:54:08 cicero weewx[10244]: engine: Platform Linux-4.8.0-46-generic-x86_64-with-Ubuntu-16.04-xenial Apr 11 18:54:08 cicero weewx[10244]: engine: Locale is 'LC_CTYPE=en_US.UTF-8;LC_NUMERIC=es_ES.UTF-8;LC_TIME=es_ES.UTF-8;LC_COLLATE=en_US.UTF-8;LC_MONETARY=es_ES.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=es_ES.UTF-8;LC_NAME=es_ES.UTF-8;LC_ADDRESS=es_ES.UTF-8;LC_TELEPHONE=es_ES.UTF-8;LC_MEASUREMENT=es_ES.UTF-8;LC_IDENTIFICATION=es_ES.UTF-8' Apr 11 18:54:08 cicero weewx[10244]: engine: Using configuration file /home/weewx/weewx.conf Apr 11 18:54:08 cicero weewx[10244]: engine: Loading station type WMR300 (weewx.drivers.wmr300) Apr 11 18:54:08 cicero weewx[10244]: wmr300: driver version is 0.18 Apr 11 18:54:08 cicero weewx[10244]: wmr300: usb info: pyusb_version=1.0.0b2 Apr 11 18:54:08 cicero weewx[10244]: wmr300: sensor map is {'outHumidity': 'humidity_1', 'extraDewpoint6': 'dewpoint_7', 'windchill': 'windchill', 'extraDewpoint4': 'dewpoint_5', 'rainRate': 'rain_rate', 'heatindex': 'heatindex_1', 'inTemp': 'temperature_0', 'windGustDir': 'wind_gust_dir', 'extraDewpoint2': 'dewpoint_3', 'extraDewpoint3': 'dewpoint_4', 'extraDewpoint1': 'dewpoint_2', 'barometer': 'barometer', 'extraDewpoint7': 'dewpoint_8', 'dewpoint': 'dewpoint_1', 'extraDewpoint5': 'dewpoint_6', 'extraHumid6': 'humidity_7', 'pressure': 'pressure', 'extraHumid4': 'humidity_5', 'extraHumid5': 'humidity_6', 'extraHumid2': 'humidity_3', 'extraHumid3': 'humidity_4', 'extraHumid1': 'humidity_2', 'extraTemp6': 'temperature_7', 'extraTemp7': 'temperature_8', 'extraTemp4': 'temperature_5', 'extraTemp5': 'temperature_6', 'extraTemp2': 'temperature_3', 'extraTemp3': 'temperature_4', 'extraTemp1': 'temperature_2', 'extraHeatindex3': 'heatindex_4', 'extraHeatindex2': 'heatindex_3', 'extraHeatindex1': 'heatindex_2', 'extraHeatindex7': 'heatindex_8', 'extraHeatindex6': 'heatindex_7', 'extraHeatindex5': 'heatindex_6', 'extraHumid7': 'humidity_8', 'extraHeatindex4': 'heatindex_5', 'windDir': 'wind_dir', 'outTemp': 'temperature_1', 'windSpeed': 'wind_avg', 'inHumidity': 'humidity_0', 'windGust': 'wind_gust'} Apr 11 18:54:08 cicero kernel: [ 2023.854523] usb 1-2.3: reset full-speed USB device number 7 using xhci_hcd Apr 11 18:54:08 cicero weewx[10244]: engine: StdConvert target unit is 0x1 Apr 11 18:54:08 cicero weewx[10244]: wxcalculate: The following values will be calculated: barometer=prefer_hardware, windchill=hardware, dewpoint=hardware, appTemp=prefer_hardware, rainRate=hardware, windrun=prefer_hardware, heatindex=hardware, maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware Apr 11 18:54:08 cicero weewx[10244]: wxcalculate: The following algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS Apr 11 18:54:08 cicero weewx[10244]: engine: Archive will use data binding wx_binding Apr 11 18:54:08 cicero weewx[10244]: engine: Record generation will be attempted in 'hardware' Apr 11 18:54:08 cicero weewx[10244]: engine: Using archive interval of 300 seconds (specified in weewx configuration) Apr 11 18:54:08 cicero weewx[10244]: manager: Created and initialized table 'arc
[weewx-user] Re: sdr drive Acurite 5-in-1 rain doesn't seem to be reporting - preliminary
On Tuesday, April 11, 2017 at 12:40:16 PM UTC-4, Craig Thom wrote: > > My display shows 0.38" of rain today. > > rtl_433 show an increase of raincounter_raw from 704 to 734 while I was > away (at 0.01" per tick that's 0.3", but "rainfall_accumulation" is still > 0. > the sdr driver only looks for raincounter_raw please run weewxd directly, then tip the rain bucket. post the LOOP/REC data from before and after the bucket tip. also post the [SDR] stanza from your weewx configuration. m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: sdr drive Acurite 5-in-1 rain doesn't seem to be reporting - preliminary
My display shows 0.38" of rain today. rtl_433 show an increase of raincounter_raw from 704 to 734 while I was away (at 0.01" per tick that's 0.3", but "rainfall_accumulation" is still 0. It appears to be the SDR driver, right? {"time" : "2017-04-11 12:35:54", "model" : "Acurite 5n1 sensor", "sensor_id" : 1730, "channel" : "A", "sequence_num" : 2, "battery" : "OK", "message_type" : 49, "wind_speed" : 0.000, "wind_dir_deg" : 180.000, "wind_dir" : "S", "rainfall_accumulation" : 0.000, "raincounter_raw" : 734} On Tuesday, April 11, 2017 at 8:26:13 AM UTC-4, Craig Thom wrote: > > And it's always possible a bird has built a nest in my rain gauge, I > guess. I'll check that later, too. > > On Tuesday, April 11, 2017 at 8:23:07 AM UTC-4, Craig Thom wrote: >> >> It's raining lightly now, so I can't be sure, but other nearby stations >> and the airport not far away are showing accumulation, but I'm not. >> >> I've got to go to work now. When I get home, I'll pour some rain in the >> sensor and see what happens. >> >> I think the problem is with rtl_433. Here's the output (with added >> carriage returns): >> >> {"time" : "2017-04-11 08:13:06", "model" : "Acurite 5n1 sensor", >> "sensor_id" : 1730, "channel" : "A", >> "sequence_num" : 2, "battery" : "OK", "message_type" : 49, "wind_speed" : >> 0.000, "wind_dir_deg" : 202.500, >> "wind_dir" : "SSW", "rainfall_accumulation" : 0.000, "raincounter_raw" : >> 706} >> >> >> In my weewx database I've got 0 for rainRate and null for rain. >> >> I have >> >> rain_total = rain_total.06C2.Acurite5n1Packet >> >> in my [[sensor_map]] >> >> I have set debug = 2 >> >> I will do more research when I got home later. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: sdr drive Acurite 5-in-1 rain doesn't seem to be reporting - preliminary
And it's always possible a bird has built a nest in my rain gauge, I guess. I'll check that later, too. On Tuesday, April 11, 2017 at 8:23:07 AM UTC-4, Craig Thom wrote: > > It's raining lightly now, so I can't be sure, but other nearby stations > and the airport not far away are showing accumulation, but I'm not. > > I've got to go to work now. When I get home, I'll pour some rain in the > sensor and see what happens. > > I think the problem is with rtl_433. Here's the output (with added > carriage returns): > > {"time" : "2017-04-11 08:13:06", "model" : "Acurite 5n1 sensor", > "sensor_id" : 1730, "channel" : "A", > "sequence_num" : 2, "battery" : "OK", "message_type" : 49, "wind_speed" : > 0.000, "wind_dir_deg" : 202.500, > "wind_dir" : "SSW", "rainfall_accumulation" : 0.000, "raincounter_raw" : > 706} > > > In my weewx database I've got 0 for rainRate and null for rain. > > I have > > rain_total = rain_total.06C2.Acurite5n1Packet > > in my [[sensor_map]] > > I have set debug = 2 > > I will do more research when I got home later. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] sdr drive Acurite 5-in-1 rain doesn't seem to be reporting - preliminary
It's raining lightly now, so I can't be sure, but other nearby stations and the airport not far away are showing accumulation, but I'm not. I've got to go to work now. When I get home, I'll pour some rain in the sensor and see what happens. I think the problem is with rtl_433. Here's the output (with added carriage returns): {"time" : "2017-04-11 08:13:06", "model" : "Acurite 5n1 sensor", "sensor_id" : 1730, "channel" : "A", "sequence_num" : 2, "battery" : "OK", "message_type" : 49, "wind_speed" : 0.000, "wind_dir_deg" : 202.500, "wind_dir" : "SSW", "rainfall_accumulation" : 0.000, "raincounter_raw" : 706 } In my weewx database I've got 0 for rainRate and null for rain. I have rain_total = rain_total.06C2.Acurite5n1Packet in my [[sensor_map]] I have set debug = 2 I will do more research when I got home later. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: Noob, 3 questions (change graphs, reduce logging, readings from bash)
So, readings from bash: sqlite3 /home/weewx/archive/weewx.sdb 'SELECT round(inTemp,1), round(inHumidity), round(extraTemp1,1), round(extraHumid1), round(outTemp,1), round(outHumidity) FROM archive ORDER BY datetime DESC LIMIT 1;' Still, point (1) remains unanswered (I can live with (3) ). Cheers, Stan W dniu poniedziałek, 10 kwietnia 2017 16:34:09 UTC+2 użytkownik stashe...@gmail.com napisał: > > Hi, > First of all: successfully running Weewx on Excito B3 (1.2 GHz ARMv5, > ArchLinux), using RTL dongle and rtl-sdr plugin, CPU utilization with 3x > Prologue sensor is 5-10% - thanks for great software! > > Now, 3 questions I couldn't find good answer for, I'm hoping someone can > share their own setup. > > 1. The Prologue sensors are only giving temp & humidity, so I have 3x temp > and 3x humidity. One pair is outside, one pair is bottom floor, one pair is > top floor. Question: how can I modify the skin to show those 6 graphs only? > (I assume I can't easily source stuff like barometric pressure from > outside, not my sensors?) > > 2. Weewx is logging a lot, since it works I don't really have a reason to > save it all - can someone share their journald config to output those logs > to /dev/null? I don't know much about journald configuration. > > 3. Is there a way to get the last updates for all sensors from bash? Some > sqlite query I can run? Would be useful for other scripts I want to run. > > Thanks in advance! > > Stan > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.