[weewx-user] Re: datos incompletos en la base de datos mysql

[Andrew Milner]

I have had this before with Fine Offset pressure sensors.  What I did was 
use the nearest airfield or known pressure value and calibrate the sensore 
using weewx.conf to adjust the pressure value
eg
pressure = pressure + 0.8 to increase the reading by 0.8 inHg

Alternatively, if you believe the pressure value is correct, adjust the 
limits in weewx.conf

Your problem is definitely being caused by the pressure values supplied by 
the station are outside the limits specified in weewx.conf so you need to 
either change the pressure value or the limit (or maybe even both).

the values for barometer and altimeter will be calculated by weewx, so 
should be specified as 'software preferred' in weewx.conf






On Saturday, 11 May 2019 04:40:43 UTC+3, Greg from Oz wrote:
>
> Here is my web page:
> https://weather.ubeaut.work/
>
>
> On Saturday, 11 May 2019 02:38:20 UTC+10, jose riaño wrote:
>>
>> Instale weewx  de paso te digo que es una herramienta fantástica lo que 
>> me sucede es que no me guarda los datos de presión de la estación y tampoco 
>> me los envía ala plataforma  de la wunderground.
>>
>>
>> [image: Captura de pantalla 2019-05-10 a la(s) 11.31.45 a.m..png]
>> este es el ultimo dato de la base de datos.
>>
>> [image: Captura de pantalla 2019-05-10 a la(s) 11.32.47 a.m..png]
>>  y esta es la base de la estación, quisiera que me ayudes ella mide 
>> presíon absoluta y relativa es una estacion de tipo 3080.
>>
>> [image: base.jpg]
>>
>>
>>
>>
>> [image: Captura de pantalla 2019-05-10 a la(s) 11.37.42 a.m..png]
>>
>>
>>  
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8e7e855b-8864-4168-8e50-6da56d32c3e0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: datos incompletos en la base de datos mysql

[Greg from Oz]

Here is my web page:
https://weather.ubeaut.work/


On Saturday, 11 May 2019 02:38:20 UTC+10, jose riaño wrote:
>
> Instale weewx  de paso te digo que es una herramienta fantástica lo que me 
> sucede es que no me guarda los datos de presión de la estación y tampoco me 
> los envía ala plataforma  de la wunderground.
>
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.31.45 a.m..png]
> este es el ultimo dato de la base de datos.
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.32.47 a.m..png]
>  y esta es la base de la estación, quisiera que me ayudes ella mide 
> presíon absoluta y relativa es una estacion de tipo 3080.
>
> [image: base.jpg]
>
>
>
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.37.42 a.m..png]
>
>
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0f11ca56-a13a-4b8b-88f1-f0442c3f139c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: datos incompletos en la base de datos mysql

[Greg from Oz]

Hi,
I have the same console and use mariadb as well.
Here is what I get on my set up.
[StdQC]

[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 60, degree_C
inTemp = -10, 80, degree_C
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 100, km_per_hour
pressure = 24, 34.5, inHg
rainRate = 0, 150, mm_per_hour
rain = 0, 2.9, mm

MariaDB [weewx]> select * from archive order by usUnits DESC LIMIT 1;
++-+--+--+--+--+--+--+--+--+--+--+--+-+--+--+--+--+--++---+--++++---+---+---+---+---+---+-+-+++++--+--++-++--+--+-++---+--+---+---+--+-+--+
| dateTime   | usUnits | interval | barometer| pressure | 
altimeter| inTemp   | outTemp  | inHumidity   | 
outHumidity  | windSpeed| windDir  | windGust | 
windGustDir | rainRate | rain | dewpoint | windchill| 
heatindex| ET | radiation | UV   | extraTemp1 | 
extraTemp2 | extraTemp3 | soilTemp1 | soilTemp2 | soilTemp3 | soilTemp4 | 
leafTemp1 | leafTemp2 | extraHumid1 | extraHumid2 | soilMoist1 | soilMoist2 
| soilMoist3 | soilMoist4 | leafWet1 | leafWet2 | rxCheckPercent | 
txBatteryStatus | consBatteryVoltage | hail | hailRate | heatingTemp | 
heatingVoltage | supplyVoltage | referenceVoltage | windBatteryStatus | 
rainBatteryStatus | outTempBatteryStatus | inTempBatteryStatus | appTemp
  |
++-+--+--+--+--+--+--+--+--+--+--+--+-+--+--+--+--+--++---+--++++---+---+---+---+---+---+-+-+++++--+--++-++--+--+-++---+--+---+---+--+-+--+
| 1557537600 |  17 |5 | 1018.12767337397 | 938.4667 | 
1018.26214725745 | 15.86667 | 14.58333 | 59.8 | 
54.3 | 2.18334418840396 | 125.623368702819 | 5.10002535611918 
| 180 |0 |0 | 5.46651455416643 | 14.58333 | 
14.58333 | 0.0802106318292086 |  NULL |0 |   NULL |
   NULL |   NULL |  NULL |  NULL |  NULL |  NULL |  
NULL |  NULL |NULL |NULL |   NULL |   NULL |
   NULL |   NULL | NULL | NULL |100 |
NULL |   NULL | NULL | NULL |NULL |   NULL 
|  NULL | NULL |  NULL |  NULL 
|0 |NULL | 12.0256268961104 |
++-+--+--+--+--+--+--+--+--+--+--+--+-+--+--+--+--+--++---+--++++---+---+---+---+---+---+-+-+++++--+--++-++--+--+-++---+--+---+---+--+-+--+
1 row in set (2.66 sec)

I have mqtt running and I get this:
jedwood/raw/weather/cloudbase_meter 1832.14341033
jedwood/raw/weather/outHumidity 54.0
jedwood/raw/weather/pressure_mbar 938.5
jedwood/raw/weather/rain_cm 0.0
jedwood/raw/weather/maxSolarRad 575.254367346
jedwood/raw/weather/barometer_mbar 1018.21671794
jedwood/raw/weather/dewpoint_C 5.20810086787
jedwood/raw/weather/rainTotal 21.15
jedwood/raw/weather/ptr 27816.0
jed

Re: [weewx-user] Re: how do I change my password at wunderground?

[Mark Hahn]

>   Did you have to generate a new key

I don't think so.  I had only tried getting a new api key before which has
nothing to do with contributing.

On Fri, May 10, 2019 at 7:57 AM Andrew Milner 
wrote:

> the change must come into force when changing the password - as I am still
> using old login and password.  Did you have to generate a new key or did
> you just use the original key as a password in weewx.conf?
>
>
>
> On Friday, 10 May 2019 17:49:24 UTC+3, Mark Hahn wrote:
>>
>> Thanks that worked, and I was able to change my web login without
>> breaking anything.  It is really confusing that it would accept my old web
>> login.  Must be to allow old running software to continue running after the
>> rules changed..
>>
>> WEEWX now needs to change the conf file to ask for "key" instead of
>> "password".
>>
>> On Fri, May 10, 2019 at 5:34 AM Andy  wrote:
>>
>>> log in and go here: https://www.wunderground.com/member/devices
>>>
>>> use the key in the "Key" column
>>>
>>>
>>>
>>>
>>> On Thursday, May 9, 2019 at 11:35:54 AM UTC-7, Mark Hahn wrote:

 >   I know one is specified in weewx.conf but is it actually used??

 Yes, a wrong password causes an authentication error in weewx log.

 I'll try changing api-key but I think that is only for reading a
 forecast, not contributing.


 On Wed, May 8, 2019 at 2:17 AM Andrew Milner 
 wrote:

> as far as i can see the api requires only an apikey  - not a
> password.  Are you sure a password is required?  I know one is specified 
> in
> weewx.conf but is it actually used??  If one is required I would suspect 
> it
> would however be the password as it was at the time the key was generated
> (suspicion says the apikey could well be a hash derived from station id 
> and
> password).  Further thought makes me think that maybe you have to generate
> a new apikey after changing the password in the members/station section.
> Tom must generate the api key since it is not specified in weewx.conf -
> just station id and password it would appear.
>
>
>
> On Wednesday, 8 May 2019 09:14:07 UTC+3, Mark Hahn wrote:
>>
>> I know this isn't really a weewx question but ...
>>
>> How do I change my password at wunderground?  I changed my password
>> in member settings at wunderground.com.  But that only changed my
>> login to the site.  Only the old login works in my weewx.conf.  Anything
>> other than the old gets me an authentication error.
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/d0711605-5e0f-482e-a964-4749556629dc%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>
 --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> weewx...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/6033e4bb-3b75-4d1e-86fe-09f1e58a6596%40googlegroups.com
>>> 
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/d3465cd9-5106-418f-bf0d-36f1ab9228e9%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/

Re: [weewx-user] Re: datos incompletos en la base de datos mysql

[Jardi Martínez]

Si ese es el dato que marca la consola debe haber algo malo con el
barómetro, es raro que la presión atmosférica baje por debajo de 29
pulgadas de mercurio (inHg).

El área que define el rango del parámetro en weewx.conf es este:

[StdQC]

[[MinMax]]

barometer = 26, 32.5, inHg

pressure = 24, 34.5, inHg
 Pero como te he dicho, ese valor no parece normal.

Jardi.

On Fri, May 10, 2019, 2:15 PM jose riaño  wrote:

> amigo mira encontre esto:
>
> 2019-05-10 16:10:35 -05 (1557522635) LOOP value 'pressure' 23.0392962475
> outside limits (24.0, 34.5)
>
>
> el dato seleccionado es el que esta marcando la consola como le abro eso
> limite o donde configuro eso en el weewx.conf??
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/4cce77f3-57fa-4c3b-a420-d595b26fd03c%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAETA7dQDxTYTRfxUuHAU3XJ5_s-2UZhr6DzhVWawHFXgxVzwXQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: datos incompletos en la base de datos mysql

[jose riaño]

amigo mira encontre esto:

2019-05-10 16:10:35 -05 (1557522635) LOOP value 'pressure' 23.0392962475 
outside limits (24.0, 34.5)


el dato seleccionado es el que esta marcando la consola como le abro eso 
limite o donde configuro eso en el weewx.conf??

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2323cbca-98c4-459e-be3d-80c08015b5c0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: datos incompletos en la base de datos mysql

[jose riaño]

amigo mira encontre esto:

2019-05-10 16:10:35 -05 (1557522635) LOOP value 'pressure' 23.0392962475 
outside limits (24.0, 34.5)


el dato seleccionado es el que esta marcando la consola como le abro eso 
limite o donde configuro eso en el weewx.conf??

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4cce77f3-57fa-4c3b-a420-d595b26fd03c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: datos incompletos en la base de datos mysql

[Jardi Martínez]

La cuestión con el sistema de medidas en weeWX es que el sistema que se
utilizan en la base de datos puede ser diferente al sistema de medidas
utilizado en los reportes y weeWX puede hacer las conversiones necesarias.

Lo aconsejable es mantener el sistema de medidas inglés en la base de
datos, eso se define en esta área:

[StdConvert]

...

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!

target_unit = METRIC# Options are 'US', 'METRICWX', or 'METRIC
Cómo puedes leer, se aconseja no cambiar este dato, lo mejor es usar 'US'
acá. El problema ahora con tu sistema es que la base de datos ya tiene
información en el sistema métrico y si lo cambias ahora va a comenzar a
guardar información en el sistema ingles, y tendrás dato mezclados.
No sé por cuánto tiempo has estado corriendo el sistema, pero si es
reciente yo te aconsejaría que borres la base de datos, cambies el
target_unit a 'US', y lo inicies nuevamente. Veremos ver si eso corrige tu
problema con la presión.

Jardi.

On Fri, May 10, 2019, 12:44 PM jose riaño  wrote:

> Amigo pase el comando  en el weewx.conf no puedo configurar eso ?
>
>
> adjunto parte del resultado  en un txt
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/8d4a0dc2-59a0-4b13-9905-3d60ff19e85b%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAETA7dSeZLX5S3p33g8nt7pzzzFeqx3USjDxf%2Bt8ESNLSAC4GA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: datos incompletos en la base de datos mysql

[jose riaño]

>
> Amigo pase el comando  en el weewx.conf no puedo configurar eso ? 


adjunto parte del resultado  en un txt

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8d4a0dc2-59a0-4b13-9905-3d60ff19e85b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
May 10 14:32:31 raspberrypi weewx[7068]: engine: 2019-05-10 14:32:32 -05 
(1557516752) LOOP value 'pressure' 780.4 outside limits (812.733158116, 
1168.30391479)
May 10 14:32:32 raspberrypi weewx[7068]: engine: 2019-05-10 14:32:32 -05 
(1557516752) LOOP value 'pressure' 780.4 outside limits (812.733158116, 
1168.30391479)
May 10 14:32:59 raspberrypi weewx[7068]: engine: 2019-05-10 14:32:59 -05 
(1557516779) LOOP value 'pressure' 780.1 outside limits (812.733158116, 
1168.30391479)
May 10 14:33:19 raspberrypi weewx[7068]: engine: 2019-05-10 14:33:20 -05 
(1557516800) LOOP value 'pressure' 780.1 outside limits (812.733158116, 
1168.30391479)
May 10 14:33:20 raspberrypi weewx[7068]: engine: 2019-05-10 14:33:20 -05 
(1557516800) LOOP value 'pressure' 780.1 outside limits (812.733158116, 
1168.30391479)
May 10 14:33:47 raspberrypi weewx[7068]: engine: 2019-05-10 14:33:47 -05 
(1557516827) LOOP value 'pressure' 780.3 outside limits (812.733158116, 
1168.30391479)
May 10 14:34:07 raspberrypi weewx[7068]: engine: 2019-05-10 14:34:08 -05 
(1557516848) LOOP value 'pressure' 780.3 outside limits (812.733158116, 
1168.30391479)
May 10 14:34:28 raspberrypi weewx[7068]: engine: 2019-05-10 14:34:28 -05 
(1557516868) LOOP value 'pressure' 780.3 outside limits (812.733158116, 
1168.30391479)
May 10 14:34:34 raspberrypi weewx[7068]: engine: 2019-05-10 14:34:35 -05 
(1557516875) LOOP value 'pressure' 780.3 outside limits (812.733158116, 
1168.30391479)
May 10 14:34:55 raspberrypi weewx[7068]: engine: 2019-05-10 14:34:55 -05 
(1557516895) LOOP value 'pressure' 780.3 outside limits (812.733158116, 
1168.30391479)
May 10 14:35:16 raspberrypi weewx[7068]: engine: 2019-05-10 14:35:16 -05 
(1557516916) LOOP value 'pressure' 780.3 outside limits (812.733158116, 
1168.30391479)
May 10 14:35:22 raspberrypi weewx[7068]: engine: 2019-05-10 14:35:23 -05 
(1557516923) LOOP value 'pressure' 780.4 outside limits (812.733158116, 
1168.30391479)
May 10 14:35:43 raspberrypi weewx[7068]: engine: 2019-05-10 14:35:44 -05 
(1557516944) LOOP value 'pressure' 780.4 outside limits (812.733158116, 
1168.30391479)

Re: [weewx-user] Re: datos incompletos en la base de datos mysql

[Jardi Martínez]

Usualmente los drivers para weeWX reportan "None" cuando el valor
registrado está fuera de ciertos parámetros. Yo me imagino que eso es lo
que está sucediendo con la presión en tu situación, y como lo menciona
Patrick puede que tenga que ver con el sistema medidas en tu configuración.
Si ese es el caso, deberían de haber algunas líneas en tu syslog que dice
algo como: LOOP value 'pressure' outside limits.

Para verificar que eso es lo que está ocurriendo puedes correr el comando:
cat /car/log/syslog | grep "LOOP value 'pressure'"

Jardi.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAETA7dQ2b3_LUE2BEXjut-XUHYvudAuJmeVfFNeTmPSyqsvU4w%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: datos incompletos en la base de datos mysql

[Patrick Tranchant]

all that is related to the pressure is at "None" Barometer, Altimeter and 
Pressure; why put the values in Metric, Weewx knows how to do the 
conversion. The display gives a value in Hpa.


On Friday, May 10, 2019 at 6:38:20 PM UTC+2, jose riaño wrote:
>
> Instale weewx  de paso te digo que es una herramienta fantástica lo que me 
> sucede es que no me guarda los datos de presión de la estación y tampoco me 
> los envía ala plataforma  de la wunderground.
>

Patrick 

>
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.31.45 a.m..png]
> este es el ultimo dato de la base de datos.
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.32.47 a.m..png]
>  y esta es la base de la estación, quisiera que me ayudes ella mide 
> presíon absoluta y relativa es una estacion de tipo 3080.
>
> [image: base.jpg]
>
>
>
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.37.42 a.m..png]
>
>
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fb45ec17-c002-4d46-8b0e-2a986c7b3d6d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: datos incompletos en la base de datos mysql

[jose riaño]

 

# WEEWX CONFIGURATION FILE

#

# Copyright (c) 2009-2019 Tom Keffer 

# See the file LICENSE.txt for your rights.


##


# This section is for general configuration information.


# Set to 1 for extra debug info, otherwise comment it out or set to zero

debug = 0


# Root directory of the weewx data file hierarchy for this station

WEEWX_ROOT = /


# Whether to log successful operations

log_success = True


# Whether to log unsuccessful operations

log_failure = True


# How long to wait before timing out a socket (FTP, HTTP) connection

socket_timeout = 20


# Do not modify this. It is used when installing and updating weewx.

version = 3.9.1


##


#   This section is for information about the station.


[Station]



# Description of the station location

location = "Pamplona, Norte de Santander Colombia "



# Latitude and longitude in decimal degrees

latitude = 7.378504

longitude = -72.646838



# Altitude of the station, with unit it is in. This is downloaded from

# from the station if the hardware supports it.

altitude = 2398, meter



# Set to type of station hardware. There must be a corresponding stanza

# in this file with a 'driver' parameter indicating the driver to be 
used.

station_type = FineOffsetUSB



# If you have a website, you may specify an URL

#station_url = http://www.example.com



# The start of the rain year (1=January; 10=October, etc.). This is

# downloaded from the station if the hardware supports it.

rain_year_start = 1



# Start of week (0=Monday, 6=Sunday)

week_start = 6


##


[FineOffsetUSB]

# This section is for the Fine Offset series of weather stations.



# The station model, e.g., WH1080, WS1090, WS2080, WH3081

model = WH3081



# How often to poll the station for data, in seconds

polling_interval = 20

data_format = 3080


# The driver to use:

driver = weewx.drivers.fousb


##


#   This section is for uploading data to Internet sites


[StdRESTful]



[[StationRegistry]]

# To register this weather station with weewx, set this to true

register_this_station = false



[[AWEKAS]]

# This section is for configuring posts to AWEKAS.



# If you wish to do this, set the option 'enable' to true,

# and specify a username and password.

# To guard against parsing errors, put the password in quotes.

enable = false

username = replace_me

password = replace_me



[[CWOP]]

# This section is for configuring posts to CWOP.



# If you wish to do this, set the option 'enable' to true,

# and specify the station ID (e.g., CW1234).

enable = false

station = replace_me



# If this is an APRS (radio amateur) station, uncomment

# the following and replace with a passcode (e.g., 12345).

#passcode = replace_me (APRS stations only)



[[PWSweather]]

# This section is for configuring posts to PWSweather.com.



# If you wish to do this, set the option 'enable' to true,

# and specify a station and password.

# To guard against parsing errors, put the password in quotes.

enable = false

station = replace_me

password = replace_me



[[WOW]]

# This section is for configuring posts to WOW.



# If you wish to do this, set the option 'enable' to true,

# and specify a station and password.

# To guard against parsing errors, put the password in quotes.

enable = false

station = replace_me

password = replace_me



[[Wunderground]]

# This section is for configuring posts to the Weather Underground.



# If you wish to do this, set the option 'enable' to true,

# and specify a station (e.g., 'KORHOODR3') and password.

# To guard against parsing errors, put the password in quotes.

enable = true

station = IPAMPL4

password = i3atxpEi



# Set the following to True to have weewx use the WU "Rapidfire"

# protocol. Not all hardware can support it. See the User's Guide.

rapidfire = True


##


#   This section specifies what reports, using which skins, to generate.


[StdReport]



# Where the skins reside, relative to WEEWX_ROOT

SKIN_ROOT = /etc/weewx/skins



# Where the generated reports should go, relative to WEEWX_RO

[weewx-user] Re: datos incompletos en la base de datos mysql

[jose riaño]

resultados del comando 

LOOP:   2019-05-10 12:16:11 -05 (1557508571) altimeter: None, appTemp: 
22.1235751859, barometer: None, cloudbase: 3542.05164487, dateTime: 
1557508571, delay: 18, dewpoint: 12.6248765147, heatindex: 21.8, humidex: 
24.3911872098, inDewpoint: 13.2750893325, inHumidity: 54.0, inTemp: 23.1, 
maxSolarRad: None, outHumidity: 56.0, outTemp: 21.8, outTempBatteryStatus: 
0, *pressure: None,* ptr: 916, radiation: 802.9734, rain: None, rainRate: 
0.0, rainTotal: 0.15, rxCheckPercent: 100, status: 0, usUnits: 16, UV: 5.0, 
windchill: 21.8, windDir: 180.0, windGust: 5.04001252687, windSpeed: 
2.52000626344


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/19940e7c-ea37-4c12-8c08-a06bb003e2ae%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: datos incompletos en la base de datos mysql

[Andrew Milner]

please attach weewx.conf (with sensitive passwords etc removed) and we may 
be able to help you.



On Friday, 10 May 2019 19:38:20 UTC+3, jose riaño wrote:
>
> Instale weewx  de paso te digo que es una herramienta fantástica lo que me 
> sucede es que no me guarda los datos de presión de la estación y tampoco me 
> los envía ala plataforma  de la wunderground.
>
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.31.45 a.m..png]
> este es el ultimo dato de la base de datos.
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.32.47 a.m..png]
>  y esta es la base de la estación, quisiera que me ayudes ella mide 
> presíon absoluta y relativa es una estacion de tipo 3080.
>
> [image: base.jpg]
>
>
>
>
> [image: Captura de pantalla 2019-05-10 a la(s) 11.37.42 a.m..png]
>
>
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/b24f1e37-04d5-464c-8ac4-a26d23477b60%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: rain-plot hourly

[rich T]

If the plot still did not update, try clearing your browser cache.

On Friday, May 10, 2019 at 10:41:02 AM UTC-4, Joachim Puttkammer wrote:
>
>
>
> Am Freitag, 10. Mai 2019 09:53:59 UTC+2 schrieb Greg from Oz:
>>
>> I have a bash script that fixes it all up.
>> https://groups.google.com/forum/#!topic/weewx-user/jS-7w_R2bXY
>>
>> If you run wee_database /etc/weewx/weewx.conf --rebuild-daily 
>> --from=startdate --to=endate
>> and then run wee_reports it "should" fix it.
>>
>> Hi Greg, I tried (very quickly) your script, but without success, there 
> are some errors. I will have a look at this evening
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ad7995bf-fee5-4355-bfd3-9f6bf76fd103%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: how do I change my password at wunderground?

[Andrew Milner]

the change must come into force when changing the password - as I am still 
using old login and password.  Did you have to generate a new key or did 
you just use the original key as a password in weewx.conf?



On Friday, 10 May 2019 17:49:24 UTC+3, Mark Hahn wrote:
>
> Thanks that worked, and I was able to change my web login without breaking 
> anything.  It is really confusing that it would accept my old web login.  
> Must be to allow old running software to continue running after the rules 
> changed.. 
>
> WEEWX now needs to change the conf file to ask for "key" instead of 
> "password".
>
> On Fri, May 10, 2019 at 5:34 AM Andy > 
> wrote:
>
>> log in and go here: https://www.wunderground.com/member/devices
>>
>> use the key in the "Key" column
>>
>>
>>
>>
>> On Thursday, May 9, 2019 at 11:35:54 AM UTC-7, Mark Hahn wrote:
>>>
>>> >   I know one is specified in weewx.conf but is it actually used??  
>>>
>>> Yes, a wrong password causes an authentication error in weewx log.
>>>
>>> I'll try changing api-key but I think that is only for reading a 
>>> forecast, not contributing.
>>>
>>>
>>> On Wed, May 8, 2019 at 2:17 AM Andrew Milner  
>>> wrote:
>>>
 as far as i can see the api requires only an apikey  - not a password.  
 Are you sure a password is required?  I know one is specified in 
 weewx.conf 
 but is it actually used??  If one is required I would suspect it would 
 however be the password as it was at the time the key was generated 
 (suspicion says the apikey could well be a hash derived from station id 
 and 
 password).  Further thought makes me think that maybe you have to generate 
 a new apikey after changing the password in the members/station section.  
 Tom must generate the api key since it is not specified in weewx.conf - 
 just station id and password it would appear.



 On Wednesday, 8 May 2019 09:14:07 UTC+3, Mark Hahn wrote:
>
> I know this isn't really a weewx question but ...
>
> How do I change my password at wunderground?  I changed my password in 
> member settings at wunderground.com.  But that only changed my login 
> to the site.  Only the old login works in my weewx.conf.  Anything other 
> than the old gets me an authentication error. 
>
 -- 
 You received this message because you are subscribed to a topic in the 
 Google Groups "weewx-user" group.
 To unsubscribe from this topic, visit 
 https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
 To unsubscribe from this group and all its topics, send an email to 
 weewx...@googlegroups.com.
 To view this discussion on the web visit 
 https://groups.google.com/d/msgid/weewx-user/d0711605-5e0f-482e-a964-4749556629dc%40googlegroups.com
  
 
 .
 For more options, visit https://groups.google.com/d/optout.

>>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to 
>> weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/6033e4bb-3b75-4d1e-86fe-09f1e58a6596%40googlegroups.com
>>  
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d3465cd9-5106-418f-bf0d-36f1ab9228e9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: how do I change my password at wunderground?

[Mark Hahn]

Thanks that worked, and I was able to change my web login without breaking
anything.  It is really confusing that it would accept my old web login.
Must be to allow old running software to continue running after the rules
changed..

WEEWX now needs to change the conf file to ask for "key" instead of
"password".

On Fri, May 10, 2019 at 5:34 AM Andy  wrote:

> log in and go here: https://www.wunderground.com/member/devices
>
> use the key in the "Key" column
>
>
>
>
> On Thursday, May 9, 2019 at 11:35:54 AM UTC-7, Mark Hahn wrote:
>>
>> >   I know one is specified in weewx.conf but is it actually used??
>>
>> Yes, a wrong password causes an authentication error in weewx log.
>>
>> I'll try changing api-key but I think that is only for reading a
>> forecast, not contributing.
>>
>>
>> On Wed, May 8, 2019 at 2:17 AM Andrew Milner 
>> wrote:
>>
>>> as far as i can see the api requires only an apikey  - not a password.
>>> Are you sure a password is required?  I know one is specified in weewx.conf
>>> but is it actually used??  If one is required I would suspect it would
>>> however be the password as it was at the time the key was generated
>>> (suspicion says the apikey could well be a hash derived from station id and
>>> password).  Further thought makes me think that maybe you have to generate
>>> a new apikey after changing the password in the members/station section.
>>> Tom must generate the api key since it is not specified in weewx.conf -
>>> just station id and password it would appear.
>>>
>>>
>>>
>>> On Wednesday, 8 May 2019 09:14:07 UTC+3, Mark Hahn wrote:

 I know this isn't really a weewx question but ...

 How do I change my password at wunderground?  I changed my password in
 member settings at wunderground.com.  But that only changed my login
 to the site.  Only the old login works in my weewx.conf.  Anything other
 than the old gets me an authentication error.

>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> weewx...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/d0711605-5e0f-482e-a964-4749556629dc%40googlegroups.com
>>> 
>>> .
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/6033e4bb-3b75-4d1e-86fe-09f1e58a6596%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CACrj35EUc869XNoV-%2B4Ao0TtHme2MwiymuzOoMFS8Ln1jgEhJQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: rain-plot hourly

[Joachim Puttkammer]

Am Freitag, 10. Mai 2019 09:53:59 UTC+2 schrieb Greg from Oz:
>
> I have a bash script that fixes it all up.
> https://groups.google.com/forum/#!topic/weewx-user/jS-7w_R2bXY
>
> If you run wee_database /etc/weewx/weewx.conf --rebuild-daily 
> --from=startdate --to=endate
> and then run wee_reports it "should" fix it.
>
> Hi Greg, I tried (very quickly) your script, but without success, there 
are some errors. I will have a look at this evening

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8ec0ac5b-fad4-4439-a673-4bce3f6068c0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: how do I change my password at wunderground?

[Andy]

log in and go here: https://www.wunderground.com/member/devices

use the key in the "Key" column




On Thursday, May 9, 2019 at 11:35:54 AM UTC-7, Mark Hahn wrote:
>
> >   I know one is specified in weewx.conf but is it actually used??  
>
> Yes, a wrong password causes an authentication error in weewx log.
>
> I'll try changing api-key but I think that is only for reading a forecast, 
> not contributing.
>
>
> On Wed, May 8, 2019 at 2:17 AM Andrew Milner  > wrote:
>
>> as far as i can see the api requires only an apikey  - not a password.  
>> Are you sure a password is required?  I know one is specified in weewx.conf 
>> but is it actually used??  If one is required I would suspect it would 
>> however be the password as it was at the time the key was generated 
>> (suspicion says the apikey could well be a hash derived from station id and 
>> password).  Further thought makes me think that maybe you have to generate 
>> a new apikey after changing the password in the members/station section.  
>> Tom must generate the api key since it is not specified in weewx.conf - 
>> just station id and password it would appear.
>>
>>
>>
>> On Wednesday, 8 May 2019 09:14:07 UTC+3, Mark Hahn wrote:
>>>
>>> I know this isn't really a weewx question but ...
>>>
>>> How do I change my password at wunderground?  I changed my password in 
>>> member settings at wunderground.com.  But that only changed my login to 
>>> the site.  Only the old login works in my weewx.conf.  Anything other than 
>>> the old gets me an authentication error. 
>>>
>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/weewx-user/ijED5lePSHI/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to 
>> weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/d0711605-5e0f-482e-a964-4749556629dc%40googlegroups.com
>>  
>> 
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6033e4bb-3b75-4d1e-86fe-09f1e58a6596%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: rain-plot hourly

[gjr80]

The WeeWX image generator uses data from the archive not the daily summaries so 
unfortunately rebuilding the daily summaries will have no effect on the plots. 
WeeWX plots that use an aggregate interval are only regenerated every aggregate 
interval, so for an hourly rain plot this will be every hour. You can either 
wait an hour and the plot will be regenerated using the 'fixed' data or you can 
force regeneration on the next report cycle by deleting the offending plot from 
the WeeWX machine.

Gary

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4498f27e-d9a1-4d83-a43b-9db36c92d166%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: rain-plot hourly

[Greg from Oz]

I have a bash script that fixes it all up.
https://groups.google.com/forum/#!topic/weewx-user/jS-7w_R2bXY

If you run wee_database /etc/weewx/weewx.conf --rebuild-daily 
--from=startdate --to=endate
and then run wee_reports it "should" fix it.


On Friday, 10 May 2019 17:01:59 UTC+10, Joachim Puttkammer wrote:
>
> Hi,
> I'm using the current weewx version with a Mysql DB. Due to an error, 
> non-existent rainfall was recorded (meteostick). Therefore I set the values 
> in the database ( table archive, archive_day_rain and archive_day_rainRate, 
> the columns rain, rainRate, sum, count and wsum) to 0 and deleted also the 
> dayrain plot. The current condition values are now 0 but the plot hasn't 
> changed. What to do for a correct plot?
>
>
> best regards
> Joachim
>
> [image: rain.png]
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c3f4e42f-dca7-494b-94e3-dcdb3cc7f1c6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] rain-plot hourly

[Joachim Puttkammer]

Hi,
I'm using the current weewx version with a Mysql DB. Due to an error, 
non-existent rainfall was recorded (meteostick). Therefore I set the values 
in the database ( table archive, archive_day_rain and archive_day_rainRate, 
the columns rain, rainRate, sum, count and wsum) to 0 and deleted also the 
dayrain plot. The current condition values are now 0 but the plot hasn't 
changed. What to do for a correct plot?


best regards
Joachim

[image: rain.png] 

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fdf496f1-5683-4d18-97a8-8f8c95906b0c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.