Re: [weewx-user] RPi weewx acurite 5-in-1 error

[Sean Jahnig]

Thanks for the reply.

When i run sudo service weewx status the errors seem to be gone now.

The troubling thing is that over the last 12 hours of windguru live wind
reporting there are 5 or 6 periods of about 10min each where there was no
report.

I will keep an eye on it.


On Sun, Oct 27, 2019 at 7:49 AM p q  wrote:

> I haven't see that exact error, but I have seen occasional random errors.
> They don't seem to affect the results.
>
> On Sat, Oct 26, 2019 at 8:06 PM Sean Jahnig  wrote:
>
>> I have the acurite 5-in-1 with rpi 4 and it has been running flawlessly
>> for a week. This morning i woke up to find this error.
>>
>> Has anyone seen this error before?
>>
>> Oct 27 06:55:19 raspberrypi weewx[603]: cheetahgenerator: Generated 8
>> files for report SeasonsReport in 0.63 seconds
>>
>> Oct 27 06:55:19 raspberrypi weewx[603]: imagegenerator: Generated 14
>> images for SeasonsReport in 0.52 seconds
>>
>> Oct 27 06:55:19 raspberrypi weewx[603]: copygenerator: copied 0 files to
>> /var/weewx/reports
>>
>> Oct 27 07:00:25 raspberrypi weewx[603]: *manager: Added record
>> 2019-10-27 07:00:00 +04 (1572145200) to database 'weewx.sdb'*
>>
>> Oct 27 07:00:25 raspberrypi weewx[603]: *manager: Added record
>> 2019-10-27 07:00:00 +04 (1572145200) to daily summary in 'weewx.sdb'*
>>
>> Oct 27 07:00:26 raspberrypi weewx[603]: cheetahgenerator: Generated 8
>> files for report SeasonsReport in 0.63 seconds
>>
>> Oct 27 07:00:28 raspberrypi weewx[603]: imagegenerator: Generated 28
>> images for SeasonsReport in 1.60 seconds
>>
>> Oct 27 07:00:28 raspberrypi weewx[603]: copygenerator: copied 0 files to
>> /var/weewx/reports
>>
>> Oct 27 07:00:29 raspberrypi weewx[603]: restx: WindGuru: Published record
>> 2019-10-27 07:00:00 +04 (1572145200)
>>
>> Oct 27 07:00:56 raspberrypi weewx[603]: *acurite: R2: unknown
>> calibration constants: 02 00 00 80 00 00 00 00 00 04 00 11 01 01 01 13 c1*
>>
>>
>> The station is at a remote location but i am able to log in and see that
>> the signal is 100% and the station has been online continuously without any
>> downtime.
>>
>>
>> I tried a reboot this morning hoping it was just a once off thing - but
>> alas, the errors are back. Nothing has changed with the setup.
>>
>>
>> Thanks,
>>
>> Sean.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/d988e994-0f46-4fc1-8c43-64344ea41889%40googlegroups.com
>> 
>> .
>>
>
>
> --
> Peter Quinn
> (415)794-2264
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAA1SM222DeeAnj5dKZA7bqRjUuKPZjuq3vsLA8RrPrQ2zBN_AQ%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALeSoZmn8OuKpf0r9fxQAPC_6Qhrpxit3GRbJgxYOk%3DPwP8n1g%40mail.gmail.com.

Re: [weewx-user] RPi weewx acurite 5-in-1 error

[p q]

I haven't see that exact error, but I have seen occasional random errors.
They don't seem to affect the results.

On Sat, Oct 26, 2019 at 8:06 PM Sean Jahnig  wrote:

> I have the acurite 5-in-1 with rpi 4 and it has been running flawlessly
> for a week. This morning i woke up to find this error.
>
> Has anyone seen this error before?
>
> Oct 27 06:55:19 raspberrypi weewx[603]: cheetahgenerator: Generated 8
> files for report SeasonsReport in 0.63 seconds
>
> Oct 27 06:55:19 raspberrypi weewx[603]: imagegenerator: Generated 14
> images for SeasonsReport in 0.52 seconds
>
> Oct 27 06:55:19 raspberrypi weewx[603]: copygenerator: copied 0 files to
> /var/weewx/reports
>
> Oct 27 07:00:25 raspberrypi weewx[603]: *manager: Added record 2019-10-27
> 07:00:00 +04 (1572145200) to database 'weewx.sdb'*
>
> Oct 27 07:00:25 raspberrypi weewx[603]: *manager: Added record 2019-10-27
> 07:00:00 +04 (1572145200) to daily summary in 'weewx.sdb'*
>
> Oct 27 07:00:26 raspberrypi weewx[603]: cheetahgenerator: Generated 8
> files for report SeasonsReport in 0.63 seconds
>
> Oct 27 07:00:28 raspberrypi weewx[603]: imagegenerator: Generated 28
> images for SeasonsReport in 1.60 seconds
>
> Oct 27 07:00:28 raspberrypi weewx[603]: copygenerator: copied 0 files to
> /var/weewx/reports
>
> Oct 27 07:00:29 raspberrypi weewx[603]: restx: WindGuru: Published record
> 2019-10-27 07:00:00 +04 (1572145200)
>
> Oct 27 07:00:56 raspberrypi weewx[603]: *acurite: R2: unknown calibration
> constants: 02 00 00 80 00 00 00 00 00 04 00 11 01 01 01 13 c1*
>
>
> The station is at a remote location but i am able to log in and see that
> the signal is 100% and the station has been online continuously without any
> downtime.
>
>
> I tried a reboot this morning hoping it was just a once off thing - but
> alas, the errors are back. Nothing has changed with the setup.
>
>
> Thanks,
>
> Sean.
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/d988e994-0f46-4fc1-8c43-64344ea41889%40googlegroups.com
> 
> .
>


-- 
Peter Quinn
(415)794-2264

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAA1SM222DeeAnj5dKZA7bqRjUuKPZjuq3vsLA8RrPrQ2zBN_AQ%40mail.gmail.com.

[weewx-user] RPi weewx acurite 5-in-1 error

[Sean Jahnig]

I have the acurite 5-in-1 with rpi 4 and it has been running flawlessly for 
a week. This morning i woke up to find this error.

Has anyone seen this error before?

Oct 27 06:55:19 raspberrypi weewx[603]: cheetahgenerator: Generated 8 files 
for report SeasonsReport in 0.63 seconds

Oct 27 06:55:19 raspberrypi weewx[603]: imagegenerator: Generated 14 images 
for SeasonsReport in 0.52 seconds

Oct 27 06:55:19 raspberrypi weewx[603]: copygenerator: copied 0 files to 
/var/weewx/reports

Oct 27 07:00:25 raspberrypi weewx[603]: *manager: Added record 2019-10-27 
07:00:00 +04 (1572145200) to database 'weewx.sdb'*

Oct 27 07:00:25 raspberrypi weewx[603]: *manager: Added record 2019-10-27 
07:00:00 +04 (1572145200) to daily summary in 'weewx.sdb'*

Oct 27 07:00:26 raspberrypi weewx[603]: cheetahgenerator: Generated 8 files 
for report SeasonsReport in 0.63 seconds

Oct 27 07:00:28 raspberrypi weewx[603]: imagegenerator: Generated 28 images 
for SeasonsReport in 1.60 seconds

Oct 27 07:00:28 raspberrypi weewx[603]: copygenerator: copied 0 files to 
/var/weewx/reports

Oct 27 07:00:29 raspberrypi weewx[603]: restx: WindGuru: Published record 
2019-10-27 07:00:00 +04 (1572145200)

Oct 27 07:00:56 raspberrypi weewx[603]: *acurite: R2: unknown calibration 
constants: 02 00 00 80 00 00 00 00 00 04 00 11 01 01 01 13 c1*


The station is at a remote location but i am able to log in and see that 
the signal is 100% and the station has been online continuously without any 
downtime.


I tried a reboot this morning hoping it was just a once off thing - but 
alas, the errors are back. Nothing has changed with the setup.


Thanks,

Sean.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d988e994-0f46-4fc1-8c43-64344ea41889%40googlegroups.com.

Re: [weewx-user] Merged datbase with old Vwiew backup

[Thomas Keffer]

(Your link didn't work for me.)

1. Did you try deleting all the NOAA records? WeeWX will automatically
regenerate them with what data it has.
2. If you already tried that, or it didn't work, then we will have to see
the log. See the Wiki on how to generate a good log
.

-tk

On Sat, Oct 26, 2019 at 9:19 AM Simone Urbani  wrote:

> Hello,
> i had an old database with view data until 2013.
> From 2018 i started to use weewx without import old data.
> Today i found an old backup and tried merge both db using this:
>
> $ sqlite3 wview.sdb
> sqlite> .output wview.dump
> sqlite> .dump
> sqlite> .quit
>
> Then import the dumped data into the weewx database:
>
> $sqlite3 weewx.sdb
> sqlite> .read wview.dump
> (this will emit an error "table archive already exists", but then should
> proceed to import the wview data)
> sqlite> .quit
>
> Starting weewx created al NOAA from 2013, but all data are empty until
> 2018.
>
> There is a solution? is better restore a clean db from 2018 and forget old
> data?
> Thanks in advance!
>
> http://ssai.it/meteo/summary.html
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/29ffe4cc-9833-4e59-b257-697a93f0ee39%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zECHNZzKMJ%3DVQjsKy95x2-6oy1aHQeiMU2asjoFX%2Bysaew%40mail.gmail.com.

Re: [weewx-user] weewx keeps crashing

[Matt Frost]

It's looking like the issue is resolved. Still no crash so far. Thanks 
again for the help.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/b2f6c8ec-de54-42e3-86ff-a171a5903e9c%40googlegroups.com.

[weewx-user] Merged datbase with old Vwiew backup

[Simone Urbani]

Hello,
i had an old database with view data until 2013.
>From 2018 i started to use weewx without import old data.
Today i found an old backup and tried merge both db using this:

$ sqlite3 wview.sdb
sqlite> .output wview.dump
sqlite> .dump
sqlite> .quit

Then import the dumped data into the weewx database:

$sqlite3 weewx.sdb
sqlite> .read wview.dump
(this will emit an error "table archive already exists", but then should 
proceed to import the wview data)
sqlite> .quit

Starting weewx created al NOAA from 2013, but all data are empty until 2018.

There is a solution? is better restore a clean db from 2018 and forget old 
data?
Thanks in advance!

http://ssai.it/meteo/summary.html

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/29ffe4cc-9833-4e59-b257-697a93f0ee39%40googlegroups.com.

[weewx-user] Merged database

[Simone Urbani]

Hello,
i had an old database with view data until 2013.
>From 2018 i started to use weewx without import old data.
Today i found an old backup and tried merge both db using this:

$ sqlite3 wview.sdb
sqlite> .output wview.dump
sqlite> .dump
sqlite> .quit

Then import the dumped data into the weewx database:

$sqlite3 weewx.sdb
sqlite> .read wview.dump
(this will emit an error "table archive already exists", but then should 
proceed to import the wview data)
sqlite> .quit

Starting weewx created al NOAA from 2013, but all data are empty until 2018.

There is a solution? is better restore a clean db from 2018 and forget old 
data?
Thanks in advance!

http://10.1.1.2/weewx/summary.html

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2b6f0a93-e618-45d1-9ec8-308c293c6b16%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Matt]

Thank you very much for your help.  I've got it working now...the config I 
had to add is...

[[[inputs]]]
   windSpeed
   name = windSpeed_mph
   units = mile_per_hour
   windGust
   name = windGust_mph
   units = mile_per_hour



On Saturday, 26 October 2019 13:44:27 UTC+1, Pat wrote:
>
> Ah, sorry, my mistake. I mis-read your question. 
>
> You'll want to configure the MQTT extension to send the units you want. So 
> you'd want something like shown in this question 
> 
> .
>
> [[MQTT]]
> ... your other mqtt config options here ...
> [[[inputs]]]
> windSpeed
> name = windSpeed_mph
> units = mile_per_hour
>
>
> The mqtt extension documentation 
>  has more info too.
>
>
> On Saturday, October 26, 2019 at 8:38:22 AM UTC-4, Pat wrote:
>>
>> A lot of these items are covered in the documentation 
>> . Check 
>> out this section 
>> . 
>>
>>
>> On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>>>
>>> Superb! That worked. Thank you very much.  I am in the UK and use 
>>> degrees Celcius and Miles per hour.  What should I set unit_system to 
>>> (METRIC gives me celcius but kmh, US gives me fahrenheit and miles per 
>>> hour)?
>>>
>>> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:

 Try changing mqtt_websockets_topic to weather/loop
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c4c5553d-52c5-423d-bd0b-1a8e0e4ad1a3%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Matt]

Thank you very much for your help.  I've got it working now...the config I 
had to add is...

[[[inputs]]]
   windSpeed
   name = windSpeed_mph
   units = mile_per_hour
   windGust
   name = windGust_mph
   units = mile_per_hour



On Saturday, 26 October 2019 13:44:27 UTC+1, Pat wrote:
>
> Ah, sorry, my mistake. I mis-read your question. 
>
> You'll want to configure the MQTT extension to send the units you want. So 
> you'd want something like shown in this question 
> 
> .
>
> [[MQTT]]
> ... your other mqtt config options here ...
> [[[inputs]]]
> windSpeed
> name = windSpeed_mph
> units = mile_per_hour
>
>
> The mqtt extension documentation 
>  has more info too.
>
>
> On Saturday, October 26, 2019 at 8:38:22 AM UTC-4, Pat wrote:
>>
>> A lot of these items are covered in the documentation 
>> . Check 
>> out this section 
>> . 
>>
>>
>> On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>>>
>>> Superb! That worked. Thank you very much.  I am in the UK and use 
>>> degrees Celcius and Miles per hour.  What should I set unit_system to 
>>> (METRIC gives me celcius but kmh, US gives me fahrenheit and miles per 
>>> hour)?
>>>
>>> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:

 Try changing mqtt_websockets_topic to weather/loop
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8e9686ba-c143-405b-9f59-7abdd2732a91%40googlegroups.com.

Re: [weewx-user] Re: Bresser 6in1

[Sean Jahnig]

I have acurite 5-in-1 but i was also having connection issues.

I installed a USB hub and i also used an active USB cable to connect the
display to the device which was 6 or 7 meters away. This combination seems
to have fixed the problem.


On Sat, Oct 26, 2019 at 4:32 PM Sebastien ROVERCH  wrote:

>
> there is only the weather station that is connected to the raspberry.
>
>
> it's the cable of the original weather station that I use
>
>
> I will test with a USB HUB
>
> I will try different operating system versions / releases on the rpi
>
> thanks
>
>
>
> [image: image0.jpeg][image: image1.jpeg]
>
>
>>
>> m
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/e3f50cc6-17b2-4324-80c1-86a7d56f1675%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALeSoZkVHGC3BmY8Ly46B9vyz%2Bmnm%2BxgacM5k9kEMEFEfae7%3Dg%40mail.gmail.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Pat]

Check my previous email. You need to tell mqtt extension what you're 
looking for. The skin gets its values from mqtt. 

On Saturday, October 26, 2019 at 8:45:18 AM UTC-4, Matt wrote:
>
> Yes, I realise that, but my weewx.conf is the same as the section you 
> highlight but I'm still not seeing celcius and mph...
>
> This is my current weewx.conf
>
> [[Defaults]]
>
>[[[Units]]]
>
># The following section sets what unit to use for each unit 
> group.
># NB: The unit is always in the singular. I.e., 
> 'mile_per_hour',
># NOT 'miles_per_hour'
>Groups
>
>group_altitude = foot# Options are 'foot' or 'meter'
>group_degree_day = degree_C_day# Options are 
> 'degree_F_day' or 'degree_C_day'
>group_pressure = mbar# Options are 'inHg', 'mmHg', 
> 'mbar', or 'hPa'
>group_rain = mm# Options are 'inch', 'cm', or 'mm'
>group_rainrate = mm_per_hour# Options are 
> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>group_speed = mile_per_hour# Options are 
> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
>group_speed2 = mile_per_hour2# Options are 
> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
>group_temperature = degree_C# Options are 'degree_F' 
> or 'degree_C'
>
>
> On Saturday, 26 October 2019 13:38:22 UTC+1, Pat wrote:
>>
>> A lot of these items are covered in the documentation 
>> . Check 
>> out this section 
>> . 
>>
>>
>> On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>>>
>>> Superb! That worked. Thank you very much.  I am in the UK and use 
>>> degrees Celcius and Miles per hour.  What should I set unit_system to 
>>> (METRIC gives me celcius but kmh, US gives me fahrenheit and miles per 
>>> hour)?
>>>
>>> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:

 Try changing mqtt_websockets_topic to weather/loop
>>>
>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8eed8166-0948-4263-b96d-875c3fe4df7e%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Matt]

Yes, I realise that, but my weewx.conf is the same as the section you 
highlight but I'm still not seeing celcius and mph...

This is my current weewx.conf

[[Defaults]]
   
   [[[Units]]]
   
   # The following section sets what unit to use for each unit 
group.
   # NB: The unit is always in the singular. I.e., 'mile_per_hour',
   # NOT 'miles_per_hour'
   Groups
   
   group_altitude = foot# Options are 'foot' or 'meter'
   group_degree_day = degree_C_day# Options are 
'degree_F_day' or 'degree_C_day'
   group_pressure = mbar# Options are 'inHg', 'mmHg', 
'mbar', or 'hPa'
   group_rain = mm# Options are 'inch', 'cm', or 'mm'
   group_rainrate = mm_per_hour# Options are 
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
   group_speed = mile_per_hour# Options are 
'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
   group_speed2 = mile_per_hour2# Options are 
'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
   group_temperature = degree_C# Options are 'degree_F' or 
'degree_C'


On Saturday, 26 October 2019 13:38:22 UTC+1, Pat wrote:
>
> A lot of these items are covered in the documentation 
> . Check 
> out this section 
> . 
>
>
> On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>>
>> Superb! That worked. Thank you very much.  I am in the UK and use degrees 
>> Celcius and Miles per hour.  What should I set unit_system to (METRIC gives 
>> me celcius but kmh, US gives me fahrenheit and miles per hour)?
>>
>> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:
>>>
>>> Try changing mqtt_websockets_topic to weather/loop
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/632fdd34-1224-4ad9-a30a-028f27a31d84%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Pat]

Ah, sorry, my mistake. I mis-read your question. 

You'll want to configure the MQTT extension to send the units you want. So 
you'd want something like shown in this question 

.

[[MQTT]]
... your other mqtt config options here ...
[[[inputs]]]
windSpeed
name = windSpeed_mph
units = mile_per_hour


The mqtt extension documentation 
 has more info too.


On Saturday, October 26, 2019 at 8:38:22 AM UTC-4, Pat wrote:
>
> A lot of these items are covered in the documentation 
> . Check 
> out this section 
> . 
>
>
> On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>>
>> Superb! That worked. Thank you very much.  I am in the UK and use degrees 
>> Celcius and Miles per hour.  What should I set unit_system to (METRIC gives 
>> me celcius but kmh, US gives me fahrenheit and miles per hour)?
>>
>> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:
>>>
>>> Try changing mqtt_websockets_topic to weather/loop
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/b09b0df6-1363-47f7-9ee9-1ed481d12a6e%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Pat]

A lot of these items are covered in the documentation 
. Check out 
this section . 


On Saturday, October 26, 2019 at 8:36:24 AM UTC-4, Matt wrote:
>
> Superb! That worked. Thank you very much.  I am in the UK and use degrees 
> Celcius and Miles per hour.  What should I set unit_system to (METRIC gives 
> me celcius but kmh, US gives me fahrenheit and miles per hour)?
>
> On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:
>>
>> Try changing mqtt_websockets_topic to weather/loop
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f103123f-7814-42a8-8682-a9794b0f8335%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Matt]

Superb! That worked. Thank you very much.  I am in the UK and use degrees 
Celcius and Miles per hour.  What should I set unit_system to (METRIC gives 
me celcius but kmh, US gives me fahrenheit and miles per hour)?

On Saturday, 26 October 2019 12:22:41 UTC+1, Pat wrote:
>
> Try changing mqtt_websockets_topic to weather/loop

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/97c78447-2199-4eeb-8988-33a84900eed1%40googlegroups.com.

[weewx-user] Re: Bresser 6in1

[Sebastien ROVERCH]

there is only the weather station that is connected to the raspberry.


it's the cable of the original weather station that I use


I will test with a USB HUB

I will try different operating system versions / releases on the rpi

thanks



[image: image0.jpeg][image: image1.jpeg]
 

>
> m
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e3f50cc6-17b2-4324-80c1-86a7d56f1675%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Pat]

Try changing mqtt_websockets_topic to weather/loop

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/3bca508d-1f5e-4fff-8c75-ba852b7d5eb6%40googlegroups.com.

Re: [weewx-user] Re: MQTT working but Belchertown skin 'Failed connecting to weather station'

[Matt]

Thank you, that's progress. Now it says 'Connected. Waiting for data' but
doesn't change. Again, the logs look ok (to a novice).

On Sat, 26 Oct 2019, 02:07 Pat,  wrote:

> Your host needs to be the IP of your broker. Not localhost.
>
>
> On Friday, October 25, 2019 at 3:57:10 PM UTC-4, Matt wrote:
>>
>> I noticed a typo myself...now changed the websockets port and put the
>> host and topic in quotes, but still not connecting...
>>
>> # MQTT Websockets defaults
>>mqtt_websockets_enabled = 1
>>mqtt_websockets_host = "localhost"
>>mqtt_websockets_port = 9001
>>mqtt_websockets_ssl = 0
>>mqtt_websockets_topic = "weather"
>>disconnect_live_website_visitor = 180
>>
>>
>>
>> On Friday, 25 October 2019 19:57:45 UTC+1, Matt wrote:
>>>
>>> Hi,
>>>
>>> I followed the instructions in
>>> https://github.com/poblabs/weewx-belchertown to install an MQTT broker
>>> and subscribe to the weather data.  It's working according to the logs...
>>>
>>> Weewx syslog
>>>
>>> Oct 25 19:49:13 weatherpi weewx[3082]: restx: MQTT: Published record
>>> 2019-10-25 19:49:13 BST (1572029353)
>>> Oct 25 19:49:29 weatherpi weewx[3082]: restx: MQTT: Published record
>>> 2019-10-25 19:49:29 BST (1572029369)
>>> Oct 25 19:49:44 weatherpi weewx[3082]: restx: MQTT: Published record
>>> 2019-10-25 19:49:44 BST (1572029384)
>>> Oct 25 19:50:01 weatherpi weewx[3082]: restx: MQTT: Published record
>>> 2019-10-25 19:50:00 BST (1572029400)
>>> Oct 25 19:50:17 weatherpi weewx[3082]: restx: MQTT: Published record
>>> 2019-10-25 19:50:16 BST (1572029416)
>>>
>>> Mosquitto log
>>>
>>> 1572029465: New connection from ::1 on port 1883.
>>> 1572029465: New client connected from ::1
>>>  as weewx_7f9ef501 (c1, k60, u'pi').
>>> 1572029465: Client weewx_7f9ef501 disconnected.
>>> 1572029481: New connection from ::1 on port 1883.
>>> 1572029481: New client connected from ::1
>>>  as weewx_65035d79 (c1, k60, u'pi').
>>> 1572029481: Client weewx_65035d79 disconnected.
>>> 1572029497: New connection from ::1 on port 1883.
>>> 1572029497: New client connected from ::1
>>>  as weewx_29b0c150 (c1, k60, u'pi').
>>> 1572029497: Client weewx_29b0c150 disconnected.
>>> 1572029513: New connection from ::1 on port 1883.
>>>
>>> weewx.conf
>>>
>>> [[MQTT]]
>>> server_url = mqtt://pi:xxx@localhost:1883
>>> topic = weather
>>> unit_system = METRIC
>>> binding = archive, loop
>>> aggregation = aggregate
>>> log_failure = true
>>> log_success = true
>>>
>>> skin.conf
>>>
>>> # MQTT Websockets defaults
>>> mqtt_websockets_enabled = 1
>>> mqtt_websockets_host = localhost
>>> mqtt_websockets_port = 1883
>>> mqtt_websockets_ssl = 0
>>> mqtt_websockets_topic = weather
>>> disconnect_live_website_visitor = 180
>>>
>>> But the webpage constantly says...
>>>
>>> [image: Untitled.png]
>>>
>>> I've been over and over the config, re-writing, adding quotes, you name
>>> it I've tried it but still no success.  Can any bright spark see something
>>> obvious that's wrong...please!!
>>>
>>> Many thanks,
>>>
>>> Matt
>>>
>> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/ykgQYOFGH8I/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/b0004563-6cdb-480a-a8e4-64e86f65784e%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAMz6Xq7ONvvxkaLTV6yhc2dSnGYrVkcmRPFe7FpPPmeW2u0__Q%40mail.gmail.com.