[weewx-user] weewx in docker plus rtldavis
Hi, I am keen to start playing around with weewx and want to run it all inside a docker container (linux/ubuntu). My station is a Davis Vantage Pro2 with US ISS frequencies. I hoped that I could use a RTL-SDR to intercept and decode the packets with rtldavis. >From what I have read this all seems doable but I just wan't sure how to setup and configure the container. I haven't been able to locate anything on dockerhub that seems close to what I am after. Can anyone give me some starting points? Maybe a similar build? A docker-compose or Dockerfile sample would be a good start. Thanks in advance. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/a4c9af86-2b52-4e0b-9aab-a50f7e500241n%40googlegroups.com.
[weewx-user] Re: Unmapped bresser7in1
Hi Magnus You don't say which version of sdr.py you are using but you need 0.93 to run the Bresser 7in1. Have a look at this thread https://github.com/matthewwall/weewx-sdr/issues/179 Paul On Tuesday, 28 November 2023 at 14:15:06 UTC magnus hult wrote: > hello > I have set up rtl dongle 433 and weewx. > I have a proper sdr.py and a weewx.conf. with a sdr driver section and > mapping > i still does not get one single map. > testruns shows both > out and parsed . > syslog only shows unmapped. > what can i do more ? > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1a7f6d1b-9e4b-4c29-915b-7541a97535f3n%40googlegroups.com.
[weewx-user] Unmapped bresser7in1
hello I have set up rtl dongle 433 and weewx. I have a proper sdr.py and a weewx.conf. with a sdr driver section and mapping i still does not get one single map. testruns shows both out and parsed . syslog only shows unmapped. what can i do more ? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/16045361-5bc0-41cd-b698-5daf54b2a54en%40googlegroups.com.
[weewx-user] Re: National Geographic IN122
i didnt now this weather station. maybe its older than 265 NE , and hasnt no compability with fine offset driver . Στις Δευτέρα 27 Νοεμβρίου 2023 στις 2:35:36 μ.μ. UTC+2, ο χρήστης Tomás έγραψε: > any ideas? should I ask in the development group? > > thanks, > > tomás.- > > On Saturday, 18 November 2023 at 15:03:42 UTC-3 Tomás wrote: > >> Hello, is this weather station supported? Could not connect to the >> console with any available driver. >> >> I've searched conversations but only found NGEO 265 station. >> >> Thanks very much! >> >> pd I attach the usbview output and a picture >> >> USB-WEATHER >> Manufacturer: ASICTECH >> Speed: 12Mb/s (full) >> Bus: 1 >> Address: 8 >> USB Version: 1.10 >> Device Class: 00(>ifc ) >> Device Subclass: 00 >> Device Protocol: 00 >> Maximum Default Endpoint Size: 8 >> Number of Configurations: 1 >> Vendor Id: 1908 >> Product Id: 20a0 >> Revision Number: 1.00 >> >> Config Number: 1 >> Number of Interfaces: 1 >> Attributes: a0 >> MaxPower Needed: 200mA >> >> Interface Number: 3 >> Name: usbhid >> Alternate Number: 0 >> Class: 03(HID ) >> Sub Class: 00 >> Protocol: 00 >> Number of Endpoints: 2 >> >> Endpoint Address: 81 >> Direction: in >> Attribute: 3 >> Type: Int. >> Max Packet Size: 8 >> Interval: 20ms >> >> Endpoint Address: 01 >> Direction: out >> Attribute: 3 >> Type: Int. >> Max Packet Size: 16 >> Interval: 2ms[image: in122_ngeo_weather.png] >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4b49aeef-658b-4884-914c-2af687397505n%40googlegroups.com.