Hello Matthew,
thanks for this great software :-)
I "upgraded" from am WH1090 to a WH2650 (with Waldbeck branding). With the
new Firmware (1.5.2) on the router, I can configure the Ecowitt (or WU)
protocol in WS View to send it directly to the interceptor driver. Works
great :-) With the new driver version (.48) nearly all sensor readings are
read automatically.
Only WindDir, Battery (of indoor sensor WH25) and some rain data is failing:
weewx@weewx:~$ systemctl status weewx
● weewx.service - LSB: weewx weather system
Loaded: loaded (/etc/init.d/weewx; generated)
Active: active (running) since Thu 2020-01-02 20:47:33 CET; 15h ago
Docs: man:systemd-sysv-generator(8)
Process: 936 ExecStart=/etc/init.d/weewx start (code=exited, status=0/
SUCCESS)
Tasks: 2 (limit: 504)
CGroup: /system.slice/weewx.service
└─1108 python /usr/bin/weewxd --daemon --pidfile=/var/run/weewx.pid
/etc/weewx/weewx.conf
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter eventrainin=0.000
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter maxdailygust=13.65
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter monthlyrainin=0.000
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter totalrainin=0.000
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter hourlyrainin=0.000
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter winddir=167
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter wh25batt=0
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter yearlyrainin=0.000
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter dailyrainin=0.000
Jan 03 12:36:25 weewx weewx[1108]: interceptor: MainThread: unrecognized
parameter weeklyrainin=0.000
I tried to adjust the sensor_map, but that did not work out.
[Interceptor]
# This section is for the network traffic interceptor driver.
# The driver to use:
driver = user.interceptor
# Specify the hardware device to capture. Options include:
# acurite-bridge - acurite internet bridge, smarthub, or access
# observer - fine offset WH2600/HP1000/HP1003, ambient WS2902
# lw30x - oregon scientific LW301/LW302
# lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge
# fineoffset-bridge - fine offset GW1000/GW1000B/GW1000BU wifi gateway
# wu-client - any hardware that uses the weather underground protocol
device_type = fineoffset-bridge
port = 9876
#[[sensor_map]]
#windDir = winddir # Windrichtung angepasst
# battery = wh25batt
It would be awesome if you could integrate the missing sensor readings or
give me some hints to make the sensor map work (with the sensor_map in
place, do I have to configure all sensors?).
Best regards
Thomas
Am Montag, 30. Dezember 2019 05:59:56 UTC+1 schrieb mwall:
>
> the weewx-interceptor driver has been updated with explicit support for
> the gw1000 wifi bridge, as well as support for weewx4/python3.
>
> instructions are at the weewx wiki:
>
> https://github.com/weewx/weewx/wiki/gw1000-recipe
>
> i would especially appreciate feedback from anyone with full sensor arrays
> (wind, rain, uv), particulate sensors, soil moisture sensors, and any other
> extended sensors offered by ecowitt.
>
> although the interceptor will now understand the extended weather
> underground protocol, the 'fineoffset-bridge' type uses the ecowitt
> protocol and a direct-to-weewx configuration (no dns hijack or sniffing or
> other shenanigans required). it does require a recent firmware on the
> gw1000 (testing with 1.5.5)
>
> m
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/a5aaa513-28a2-4301-b3c0-54941271fd00%40googlegroups.com.