[weewx-user] Re: Acurite Atlas SDR Sensor Mapping and Pressure Readings

2023-04-30 Thread Kevin Crivelli 
any luck on the pressure sensor? am I to assume that if I have an Atlas if 
I want pressure readings in weewx I'll have to order a different pressure 
sensor? If so, can anyone recommend a good outdoor sensor? 

On Friday, September 18, 2020 at 9:09:07 AM UTC-4 Andy wrote:

> This  for pressure, 
> some else here suggested it and it seems to work ok.
>
> Battery:
>
> inTempBatteryStatus = battery.152.FOWH25Packe
> outTempBatteryStatus = battery.1:14.HidekiTS04Packet
> windBatteryStatus = battery.0A66.Acurite5n1Packet
>
>   [image: Screenshot_2020-09-18_06-04-42.png]
>
> On Thursday, September 17, 2020 at 12:05:49 PM UTC-7 tarob...@gmail.com 
> wrote:
>
>> I'm not well versed on getting other pressure readings into weewx. I'm 
>> sure there is a way but might be more work for just a temp situation.
>>
>> I think the distance packets should always show up, it would just show 
>> the last storm distance in the packets. Although I have a standalone 
>> lightning tower, not an atlas, so maybe the behavior is different. This 
>> site  has some 
>> information on that discussion.
>>
>> Assigning battery to outTempBatteryStatus should work but I haven't done 
>> this. From my understanding, acurite signal for battery is either 1 or 0.
>>
>> On Thursday, September 17, 2020 at 1:51:19 PM UTC-4 wxwatching wrote:
>>
>>> I have ordered a pressure sensor, but delivery looks like it will take a 
>>> month. Meanwhile, I thought I could just use my own console from my AcuRite 
>>> 5-n-1 (Model 1036), but haven't figured out how to just use the pressure 
>>> readings from it and combine with my Atlas readings.
>>>
>>> So, I assume the distance..AcuriteLightningPacket packets will not 
>>> show in the SDR output until an actual storm is taking place?
>>>
>>> In reference to the battery, is that to mapped then as:
>>>
>>> outTempBatteryStatus = battery..0222.AcuriteAtlasPacket 
>>>
>>> On Thursday, September 17, 2020 at 8:58:53 AM UTC-4 tarob...@gmail.com 
>>> wrote:
>>>
 The lightning data is handled a bit differently and from searching the 
 user group I was able to get it working with the following sensor map:

 [[sensor_map]]
 ...
 lightning_distance = distance..AcuriteLightningPacket
 strikes_total = strikes_total..AcuriteLightningPacket
 [[deltas]]
 rain = rain_total
 lightning_strike_count = strikes_total

 and then in the calibration section in the weewx.conf file I added the 
 following:

 [StdCalibrate]
 
 [[Corrections]]
 # For each type, an arbitrary calibration expression can be 
 given.
 # It should be in the units defined in the StdConvert section.
 # Example:
 foo = foo + 0.2
 lightning_distance = lightning_distance if 
 lightning_strike_count > 0 else None

 More info here 
 

 I haven't been able to determine how to capture signal strength from 
 Acurite via SDR. The battery status as I understand it is either "1" which 
 is good or "0" which is bad.

 Depending on your setup, there are a couple ways to get pressure. I am 
 using a raspberry pi 3 and added a pressure sensor to it using these 
 instructions 
 .

>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/bc60c48c-1001-4bfb-b3ce-48f863a6758fn%40googlegroups.com.

[weewx-user] Re: Acurite Atlas SDR Sensor Mapping and Pressure Readings

2020-09-18 Thread Andy 
This  for pressure, some 
else here suggested it and it seems to work ok.

Battery:

inTempBatteryStatus = battery.152.FOWH25Packe
outTempBatteryStatus = battery.1:14.HidekiTS04Packet
windBatteryStatus = battery.0A66.Acurite5n1Packet

  [image: Screenshot_2020-09-18_06-04-42.png]

On Thursday, September 17, 2020 at 12:05:49 PM UTC-7 tarob...@gmail.com 
wrote:

> I'm not well versed on getting other pressure readings into weewx. I'm 
> sure there is a way but might be more work for just a temp situation.
>
> I think the distance packets should always show up, it would just show the 
> last storm distance in the packets. Although I have a standalone lightning 
> tower, not an atlas, so maybe the behavior is different. This site 
>  has some information on 
> that discussion.
>
> Assigning battery to outTempBatteryStatus should work but I haven't done 
> this. From my understanding, acurite signal for battery is either 1 or 0.
>
> On Thursday, September 17, 2020 at 1:51:19 PM UTC-4 wxwatching wrote:
>
>> I have ordered a pressure sensor, but delivery looks like it will take a 
>> month. Meanwhile, I thought I could just use my own console from my AcuRite 
>> 5-n-1 (Model 1036), but haven't figured out how to just use the pressure 
>> readings from it and combine with my Atlas readings.
>>
>> So, I assume the distance..AcuriteLightningPacket packets will not 
>> show in the SDR output until an actual storm is taking place?
>>
>> In reference to the battery, is that to mapped then as:
>>
>> outTempBatteryStatus = battery..0222.AcuriteAtlasPacket 
>>
>> On Thursday, September 17, 2020 at 8:58:53 AM UTC-4 tarob...@gmail.com 
>> wrote:
>>
>>> The lightning data is handled a bit differently and from searching the 
>>> user group I was able to get it working with the following sensor map:
>>>
>>> [[sensor_map]]
>>> ...
>>> lightning_distance = distance..AcuriteLightningPacket
>>> strikes_total = strikes_total..AcuriteLightningPacket
>>> [[deltas]]
>>> rain = rain_total
>>> lightning_strike_count = strikes_total
>>>
>>> and then in the calibration section in the weewx.conf file I added the 
>>> following:
>>>
>>> [StdCalibrate]
>>> 
>>> [[Corrections]]
>>> # For each type, an arbitrary calibration expression can be 
>>> given.
>>> # It should be in the units defined in the StdConvert section.
>>> # Example:
>>> foo = foo + 0.2
>>> lightning_distance = lightning_distance if 
>>> lightning_strike_count > 0 else None
>>>
>>> More info here 
>>> 
>>>
>>> I haven't been able to determine how to capture signal strength from 
>>> Acurite via SDR. The battery status as I understand it is either "1" which 
>>> is good or "0" which is bad.
>>>
>>> Depending on your setup, there are a couple ways to get pressure. I am 
>>> using a raspberry pi 3 and added a pressure sensor to it using these 
>>> instructions 
>>> .
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2045f698-0d99-4b97-8f70-34c19f8c5250n%40googlegroups.com.

[weewx-user] Re: Acurite Atlas SDR Sensor Mapping and Pressure Readings

2020-09-17 Thread tarob...@gmail.com 
I'm not well versed on getting other pressure readings into weewx. I'm sure 
there is a way but might be more work for just a temp situation.

I think the distance packets should always show up, it would just show the 
last storm distance in the packets. Although I have a standalone lightning 
tower, not an atlas, so maybe the behavior is different. This site 
 has some information on 
that discussion.

Assigning battery to outTempBatteryStatus should work but I haven't done 
this. From my understanding, acurite signal for battery is either 1 or 0.

On Thursday, September 17, 2020 at 1:51:19 PM UTC-4 wxwatching wrote:

> I have ordered a pressure sensor, but delivery looks like it will take a 
> month. Meanwhile, I thought I could just use my own console from my AcuRite 
> 5-n-1 (Model 1036), but haven't figured out how to just use the pressure 
> readings from it and combine with my Atlas readings.
>
> So, I assume the distance..AcuriteLightningPacket packets will not 
> show in the SDR output until an actual storm is taking place?
>
> In reference to the battery, is that to mapped then as:
>
> outTempBatteryStatus = battery..0222.AcuriteAtlasPacket 
>
> On Thursday, September 17, 2020 at 8:58:53 AM UTC-4 tarob...@gmail.com 
> wrote:
>
>> The lightning data is handled a bit differently and from searching the 
>> user group I was able to get it working with the following sensor map:
>>
>> [[sensor_map]]
>> ...
>> lightning_distance = distance..AcuriteLightningPacket
>> strikes_total = strikes_total..AcuriteLightningPacket
>> [[deltas]]
>> rain = rain_total
>> lightning_strike_count = strikes_total
>>
>> and then in the calibration section in the weewx.conf file I added the 
>> following:
>>
>> [StdCalibrate]
>> 
>> [[Corrections]]
>> # For each type, an arbitrary calibration expression can be given.
>> # It should be in the units defined in the StdConvert section.
>> # Example:
>> foo = foo + 0.2
>> lightning_distance = lightning_distance if lightning_strike_count 
>> > 0 else None
>>
>> More info here 
>> 
>>
>> I haven't been able to determine how to capture signal strength from 
>> Acurite via SDR. The battery status as I understand it is either "1" which 
>> is good or "0" which is bad.
>>
>> Depending on your setup, there are a couple ways to get pressure. I am 
>> using a raspberry pi 3 and added a pressure sensor to it using these 
>> instructions 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c6521fe7-adf1-44d4-9e4f-331c017d4cdbn%40googlegroups.com.

[weewx-user] Re: Acurite Atlas SDR Sensor Mapping and Pressure Readings

2020-09-17 Thread wxwatching 
I have ordered a pressure sensor, but delivery looks like it will take a 
month. Meanwhile, I thought I could just use my own console from my AcuRite 
5-n-1 (Model 1036), but haven't figured out how to just use the pressure 
readings from it and combine with my Atlas readings.

So, I assume the distance..AcuriteLightningPacket packets will not show 
in the SDR output until an actual storm is taking place?

In reference to the battery, is that to mapped then as:

outTempBatteryStatus = battery..0222.AcuriteAtlasPacket 

On Thursday, September 17, 2020 at 8:58:53 AM UTC-4 tarob...@gmail.com 
wrote:

> The lightning data is handled a bit differently and from searching the 
> user group I was able to get it working with the following sensor map:
>
> [[sensor_map]]
> ...
> lightning_distance = distance..AcuriteLightningPacket
> strikes_total = strikes_total..AcuriteLightningPacket
> [[deltas]]
> rain = rain_total
> lightning_strike_count = strikes_total
>
> and then in the calibration section in the weewx.conf file I added the 
> following:
>
> [StdCalibrate]
> 
> [[Corrections]]
> # For each type, an arbitrary calibration expression can be given.
> # It should be in the units defined in the StdConvert section.
> # Example:
> foo = foo + 0.2
> lightning_distance = lightning_distance if lightning_strike_count 
> > 0 else None
>
> More info here 
> 
>
> I haven't been able to determine how to capture signal strength from 
> Acurite via SDR. The battery status as I understand it is either "1" which 
> is good or "0" which is bad.
>
> Depending on your setup, there are a couple ways to get pressure. I am 
> using a raspberry pi 3 and added a pressure sensor to it using these 
> instructions 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/212d1d8e-6924-4d1d-bc07-dad5f5e60f7an%40googlegroups.com.

[weewx-user] Re: Acurite Atlas SDR Sensor Mapping and Pressure Readings

2020-09-17 Thread tarob...@gmail.com 
The lightning data is handled a bit differently and from searching the user 
group I was able to get it working with the following sensor map:

[[sensor_map]]
...
lightning_distance = distance..AcuriteLightningPacket
strikes_total = strikes_total..AcuriteLightningPacket
[[deltas]]
rain = rain_total
lightning_strike_count = strikes_total

and then in the calibration section in the weewx.conf file I added the 
following:

[StdCalibrate]

[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
lightning_distance = lightning_distance if lightning_strike_count > 
0 else None

More info here 


I haven't been able to determine how to capture signal strength from 
Acurite via SDR. The battery status as I understand it is either "1" which 
is good or "0" which is bad.

Depending on your setup, there are a couple ways to get pressure. I am 
using a raspberry pi 3 and added a pressure sensor to it using these 
instructions .

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fbc52421-617a-4def-8306-e92f618edee6n%40googlegroups.com.