Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

Thank you Karen, Tom, and the others who tried to help. I think Karen could 
be on to something.

The t-mobile home internet router does not have an advanced interface and 
no bridge mode. The connection speed is slow at my location. The device is 
going back and I'm going to stick with my current provider.

On Tuesday, January 19, 2021 at 3:53:40 PM UTC-6 kk44...@gmail.com wrote:

> What catched my eyes is the "229 Extended Passive Mode Entered" in the 
> log. There is passive mode and extended passive mode, and it's not the 
> same. I googled a littled bit, and all the discussions about that message 
> involve firewall and router configuration. 
>
> From what I read, extended passive mode sends less information to the 
> client how to transfer data, and the client (in this case weewx) is to 
> assume what's missing. So it could be that weewx is not ready for extended 
> passive mode but for standard passive mode, only. But more likely it is a 
> firewall or router issue.
>
> tke...@gmail.com schrieb am Dienstag, 19. Januar 2021 um 02:50:26 UTC+1:
>
>> Well, that sucks. It works nicely on my end. 
>>
>> So, it must be something on your end. Perhaps your firewall, or some IPv6 
>> issue, which I am totally unqualified to diagnose. The only thing I can 
>> suggest is to try testing your connection to see if it is IPv6 ready: 
>> https://test-ipv6.com/
>>
>> Other than that, I'm out of ideas.
>>
>> -tk
>>
>> On Mon, Jan 18, 2021 at 5:24 PM Rich Strle  wrote:
>>
>>> No joy
>>>
>>> I tried  reuse_ssl = True here:
>>>
>>> # To upload files from something other than what HTML_ROOT is set
>>> # to above, specify a different HTML_ROOT here.
>>> #HTML_ROOT = /var/www/html/weewx
>>>
>>> reuse_ssl = True
>>>
>>> # Most FTP servers use port 21
>>> port = 21
>>>
>>> # Set to 1 to use passive mode, zero for active mode
>>> passive = 1
>>>
>>> And closer to the bottom of the FTP section.
>>>
>>> Jan 17 23:50:27 pi-weather weewx[429] DEBUG weewx.reportengine: Found 
>>> configuration file /etc/weewx/skins/Ftp/skin.conf for report 'FTP'
>>> Jan 17 23:50:28 pi-weather weewx[429] DEBUG weeutil.ftpupload: 
>>> Attempting connection to www.cliffandbuster.com
>>> Jan 17 23:50:33 pi-weather weewx[429] DEBUG weeutil.ftpupload: Connected 
>>> to www.cliffandbuster.com
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
>>> uploading /var/www/html/weewx/yearradiation.png to server 
>>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>>> (|||50223|)'
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> ftpgenerator: (0): caught exception '': 229 
>>> Extended Passive Mode Entered (|||50223|)
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    Traceback (most recent call last):
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    n = ftp_data.run()
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    ftp_server.storbinary(stor_cmd, fd)
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    with self.transfercmd(cmd, rest) as conn:
>>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>>>
>>>
>>> On Monday, January 18, 2021 at 5:46:12 PM UTC-6 tke...@gmail.com wrote:
>>>
 [Rich sent me his credentials via a private email.]

 As soon as I tried FTP to Rich's server, I recognized the problem. The 
 server is using Pure-FTPd, which reuses SSL connections. The Python 
 library 
 has a bug 
 
  
 that prevents this. WeeWX V4.1.0 and greater have a workaround for the 
 bug. 
 To activate, add option reuse_ssl and set it to true.

 [[FTP]]
 ...
 reuse_ssl = True

 See if that helps.

 -tk

 On Mon, Jan 18, 2021 at 9:39 AM Rich Strle  wrote:

> Status: Resolving address of www.cliffandbuster.com
> Status: Connecting to 107.180.51.77:21...
> Status: Connection established, waiting for welcome message...
> Status: Initializing TLS...
> Status: Verifying certificate...
> Status: TLS connection established.
> Status: Logged in
> Status: Retrieving directory listing of "/"...
> 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Karen K]

What catched my eyes is the "229 Extended Passive Mode Entered" in the log. 
There is passive mode and extended passive mode, and it's not the same. I 
googled a littled bit, and all the discussions about that message involve 
firewall and router configuration. 

>From what I read, extended passive mode sends less information to the 
client how to transfer data, and the client (in this case weewx) is to 
assume what's missing. So it could be that weewx is not ready for extended 
passive mode but for standard passive mode, only. But more likely it is a 
firewall or router issue.

tke...@gmail.com schrieb am Dienstag, 19. Januar 2021 um 02:50:26 UTC+1:

> Well, that sucks. It works nicely on my end. 
>
> So, it must be something on your end. Perhaps your firewall, or some IPv6 
> issue, which I am totally unqualified to diagnose. The only thing I can 
> suggest is to try testing your connection to see if it is IPv6 ready: 
> https://test-ipv6.com/
>
> Other than that, I'm out of ideas.
>
> -tk
>
> On Mon, Jan 18, 2021 at 5:24 PM Rich Strle  wrote:
>
>> No joy
>>
>> I tried  reuse_ssl = True here:
>>
>> # To upload files from something other than what HTML_ROOT is set
>> # to above, specify a different HTML_ROOT here.
>> #HTML_ROOT = /var/www/html/weewx
>>
>> reuse_ssl = True
>>
>> # Most FTP servers use port 21
>> port = 21
>>
>> # Set to 1 to use passive mode, zero for active mode
>> passive = 1
>>
>> And closer to the bottom of the FTP section.
>>
>> Jan 17 23:50:27 pi-weather weewx[429] DEBUG weewx.reportengine: Found 
>> configuration file /etc/weewx/skins/Ftp/skin.conf for report 'FTP'
>> Jan 17 23:50:28 pi-weather weewx[429] DEBUG weeutil.ftpupload: Attempting 
>> connection to www.cliffandbuster.com
>> Jan 17 23:50:33 pi-weather weewx[429] DEBUG weeutil.ftpupload: Connected 
>> to www.cliffandbuster.com
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
>> uploading /var/www/html/weewx/yearradiation.png to server 
>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>> (|||50223|)'
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine: 
>> ftpgenerator: (0): caught exception '': 229 
>> Extended Passive Mode Entered (|||50223|)
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>    Traceback (most recent call last):
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>    n = ftp_data.run()
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>    ftp_server.storbinary(stor_cmd, fd)
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>    with self.transfercmd(cmd, rest) as conn:
>> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>>
>>
>> On Monday, January 18, 2021 at 5:46:12 PM UTC-6 tke...@gmail.com wrote:
>>
>>> [Rich sent me his credentials via a private email.]
>>>
>>> As soon as I tried FTP to Rich's server, I recognized the problem. The 
>>> server is using Pure-FTPd, which reuses SSL connections. The Python library 
>>> has a bug 
>>> 
>>>  
>>> that prevents this. WeeWX V4.1.0 and greater have a workaround for the bug. 
>>> To activate, add option reuse_ssl and set it to true.
>>>
>>> [[FTP]]
>>> ...
>>> reuse_ssl = True
>>>
>>> See if that helps.
>>>
>>> -tk
>>>
>>> On Mon, Jan 18, 2021 at 9:39 AM Rich Strle  wrote:
>>>
 Status: Resolving address of www.cliffandbuster.com
 Status: Connecting to 107.180.51.77:21...
 Status: Connection established, waiting for welcome message...
 Status: Initializing TLS...
 Status: Verifying certificate...
 Status: TLS connection established.
 Status: Logged in
 Status: Retrieving directory listing of "/"...
 Status: Directory listing of "/" successful
 Status: Resolving address of www.cliffandbuster.com
 Status: Connecting to 107.180.51.77:21...
 Status: Connection established, waiting for welcome message...
 Status: Initializing TLS...
 Status: Verifying certificate...
 Status: TLS connection established.
 Status: Logged in
 Status: Starting upload of /var/www/html/weewx/image.jpg
 Status: File transfer successful, transferred 49,150 bytes in 1 second
 Status: Retrieving 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

Well, that sucks. It works nicely on my end.

So, it must be something on your end. Perhaps your firewall, or some IPv6
issue, which I am totally unqualified to diagnose. The only thing I can
suggest is to try testing your connection to see if it is IPv6 ready:
https://test-ipv6.com/

Other than that, I'm out of ideas.

-tk

On Mon, Jan 18, 2021 at 5:24 PM Rich Strle  wrote:

> No joy
>
> I tried  reuse_ssl = True here:
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = /var/www/html/weewx
>
> reuse_ssl = True
>
> # Most FTP servers use port 21
> port = 21
>
> # Set to 1 to use passive mode, zero for active mode
> passive = 1
>
> And closer to the bottom of the FTP section.
>
> Jan 17 23:50:27 pi-weather weewx[429] DEBUG weewx.reportengine: Found
> configuration file /etc/weewx/skins/Ftp/skin.conf for report 'FTP'
> Jan 17 23:50:28 pi-weather weewx[429] DEBUG weeutil.ftpupload: Attempting
> connection to www.cliffandbuster.com
> Jan 17 23:50:33 pi-weather weewx[429] DEBUG weeutil.ftpupload: Connected
> to www.cliffandbuster.com
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed
> uploading /var/www/html/weewx/yearradiation.png to server
> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered
> (|||50223|)'
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
> ftpgenerator: (0): caught exception '': 229
> Extended Passive Mode Entered (|||50223|)
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>    Traceback (most recent call last):
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>    n = ftp_data.run()
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>    ftp_server.storbinary(stor_cmd, fd)
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>    with self.transfercmd(cmd, rest) as conn:
> Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>
>
> On Monday, January 18, 2021 at 5:46:12 PM UTC-6 tke...@gmail.com wrote:
>
>> [Rich sent me his credentials via a private email.]
>>
>> As soon as I tried FTP to Rich's server, I recognized the problem. The
>> server is using Pure-FTPd, which reuses SSL connections. The Python library
>> has a bug
>> 
>> that prevents this. WeeWX V4.1.0 and greater have a workaround for the bug.
>> To activate, add option reuse_ssl and set it to true.
>>
>> [[FTP]]
>> ...
>> reuse_ssl = True
>>
>> See if that helps.
>>
>> -tk
>>
>> On Mon, Jan 18, 2021 at 9:39 AM Rich Strle  wrote:
>>
>>> Status: Resolving address of www.cliffandbuster.com
>>> Status: Connecting to 107.180.51.77:21...
>>> Status: Connection established, waiting for welcome message...
>>> Status: Initializing TLS...
>>> Status: Verifying certificate...
>>> Status: TLS connection established.
>>> Status: Logged in
>>> Status: Retrieving directory listing of "/"...
>>> Status: Directory listing of "/" successful
>>> Status: Resolving address of www.cliffandbuster.com
>>> Status: Connecting to 107.180.51.77:21...
>>> Status: Connection established, waiting for welcome message...
>>> Status: Initializing TLS...
>>> Status: Verifying certificate...
>>> Status: TLS connection established.
>>> Status: Logged in
>>> Status: Starting upload of /var/www/html/weewx/image.jpg
>>> Status: File transfer successful, transferred 49,150 bytes in 1 second
>>> Status: Retrieving directory listing of "/"...
>>> Status: Directory listing of "/" successful
>>>
>>> I disconnected and reconnected. Does filezilla trust the site now so
>>> we're not seeing all of the connection comments?
>>>
>>> On Monday, January 18, 2021 at 10:37:24 AM UTC-6 tke...@gmail.com wrote:
>>>
 That's pretty much what I'm thinking, but I'm trying to get the
 evidence from Filezilla. It should say that as it negotiates with the
 server.

 FTP is 40 year old technology. It's amazing that there are still so
 many incompatible versions out there.

 On Mon, Jan 18, 2021 at 8:34 AM Les Niles  wrote:

> The server is responding to the PASV command by entering extended
> passive mode EPSV, which apparently is a legal response but which
> weewx/ftplib is not handling correctly. (I don’t have access to the 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

No joy

I tried  reuse_ssl = True here:

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx

reuse_ssl = True

# Most FTP servers use port 21
port = 21

# Set to 1 to use passive mode, zero for active mode
passive = 1

And closer to the bottom of the FTP section.

Jan 17 23:50:27 pi-weather weewx[429] DEBUG weewx.reportengine: Found 
configuration file /etc/weewx/skins/Ftp/skin.conf for report 'FTP'
Jan 17 23:50:28 pi-weather weewx[429] DEBUG weeutil.ftpupload: Attempting 
connection to www.cliffandbuster.com
Jan 17 23:50:33 pi-weather weewx[429] DEBUG weeutil.ftpupload: Connected to 
www.cliffandbuster.com
Jan 17 23:50:33 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
uploading /var/www/html/weewx/yearradiation.png to server 
www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
(|||50223|)'
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine: 
ftpgenerator: (0): caught exception '': 229 
Extended Passive Mode Entered (|||50223|)
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
   Traceback (most recent call last):
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
   n = ftp_data.run()
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
   ftp_server.storbinary(stor_cmd, fd)
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
   with self.transfercmd(cmd, rest) as conn:
Jan 17 23:50:33 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd


On Monday, January 18, 2021 at 5:46:12 PM UTC-6 tke...@gmail.com wrote:

> [Rich sent me his credentials via a private email.]
>
> As soon as I tried FTP to Rich's server, I recognized the problem. The 
> server is using Pure-FTPd, which reuses SSL connections. The Python library 
> has a bug 
> 
>  
> that prevents this. WeeWX V4.1.0 and greater have a workaround for the bug. 
> To activate, add option reuse_ssl and set it to true.
>
> [[FTP]]
> ...
> reuse_ssl = True
>
> See if that helps.
>
> -tk
>
> On Mon, Jan 18, 2021 at 9:39 AM Rich Strle  wrote:
>
>> Status: Resolving address of www.cliffandbuster.com
>> Status: Connecting to 107.180.51.77:21...
>> Status: Connection established, waiting for welcome message...
>> Status: Initializing TLS...
>> Status: Verifying certificate...
>> Status: TLS connection established.
>> Status: Logged in
>> Status: Retrieving directory listing of "/"...
>> Status: Directory listing of "/" successful
>> Status: Resolving address of www.cliffandbuster.com
>> Status: Connecting to 107.180.51.77:21...
>> Status: Connection established, waiting for welcome message...
>> Status: Initializing TLS...
>> Status: Verifying certificate...
>> Status: TLS connection established.
>> Status: Logged in
>> Status: Starting upload of /var/www/html/weewx/image.jpg
>> Status: File transfer successful, transferred 49,150 bytes in 1 second
>> Status: Retrieving directory listing of "/"...
>> Status: Directory listing of "/" successful
>>
>> I disconnected and reconnected. Does filezilla trust the site now so 
>> we're not seeing all of the connection comments?
>>
>> On Monday, January 18, 2021 at 10:37:24 AM UTC-6 tke...@gmail.com wrote:
>>
>>> That's pretty much what I'm thinking, but I'm trying to get the evidence 
>>> from Filezilla. It should say that as it negotiates with the server. 
>>>
>>> FTP is 40 year old technology. It's amazing that there are still so many 
>>> incompatible versions out there.
>>>
>>> On Mon, Jan 18, 2021 at 8:34 AM Les Niles  wrote:
>>>
 The server is responding to the PASV command by entering extended 
 passive mode EPSV, which apparently is a legal response but which 
 weewx/ftplib is not handling correctly. (I don’t have access to the code 
 right now so can’t be more precise about where to fix.) The difference is 
 that in EPSV mode the server doesn’t return an IP, just a port number. 
 (The 
 line “host, port = self.makepasv()” is not going to work.) 

 Apparently passive mode has been the default for ftplib since python 
 2.1, so maybe just skip trying to change to PASV entirely?

   -Les


 On Jan 18, 2021, at 7:21 AM, Rich 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

[Rich sent me his credentials via a private email.]

As soon as I tried FTP to Rich's server, I recognized the problem. The
server is using Pure-FTPd, which reuses SSL connections. The Python library
has a bug

that prevents this. WeeWX V4.1.0 and greater have a workaround for the bug.
To activate, add option reuse_ssl and set it to true.

[[FTP]]
...
reuse_ssl = True

See if that helps.

-tk

On Mon, Jan 18, 2021 at 9:39 AM Rich Strle  wrote:

> Status: Resolving address of www.cliffandbuster.com
> Status: Connecting to 107.180.51.77:21...
> Status: Connection established, waiting for welcome message...
> Status: Initializing TLS...
> Status: Verifying certificate...
> Status: TLS connection established.
> Status: Logged in
> Status: Retrieving directory listing of "/"...
> Status: Directory listing of "/" successful
> Status: Resolving address of www.cliffandbuster.com
> Status: Connecting to 107.180.51.77:21...
> Status: Connection established, waiting for welcome message...
> Status: Initializing TLS...
> Status: Verifying certificate...
> Status: TLS connection established.
> Status: Logged in
> Status: Starting upload of /var/www/html/weewx/image.jpg
> Status: File transfer successful, transferred 49,150 bytes in 1 second
> Status: Retrieving directory listing of "/"...
> Status: Directory listing of "/" successful
>
> I disconnected and reconnected. Does filezilla trust the site now so we're
> not seeing all of the connection comments?
>
> On Monday, January 18, 2021 at 10:37:24 AM UTC-6 tke...@gmail.com wrote:
>
>> That's pretty much what I'm thinking, but I'm trying to get the evidence
>> from Filezilla. It should say that as it negotiates with the server.
>>
>> FTP is 40 year old technology. It's amazing that there are still so many
>> incompatible versions out there.
>>
>> On Mon, Jan 18, 2021 at 8:34 AM Les Niles  wrote:
>>
>>> The server is responding to the PASV command by entering extended
>>> passive mode EPSV, which apparently is a legal response but which
>>> weewx/ftplib is not handling correctly. (I don’t have access to the code
>>> right now so can’t be more precise about where to fix.) The difference is
>>> that in EPSV mode the server doesn’t return an IP, just a port number. (The
>>> line “host, port = self.makepasv()” is not going to work.)
>>>
>>> Apparently passive mode has been the default for ftplib since python
>>> 2.1, so maybe just skip trying to change to PASV entirely?
>>>
>>>   -Les
>>>
>>>
>>> On Jan 18, 2021, at 7:21 AM, Rich Strle  wrote:
>>>
>>> 
>>> Command: TYPE I
>>> Trace: CFtpControlSocket::OnReceive()
>>> Response: 200 TYPE is now 8-bit binary
>>> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
>>> Trace: CControlSocket::SendNextCommand()
>>> Trace: CFtpRawTransferOpData::Send() in state 2
>>> Command: PASV
>>> Trace: CFtpControlSocket::OnReceive()
>>> Response: 200 TYPE is now 8-bit binary
>>> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
>>> Trace: CControlSocket::SendNextCommand()
>>> Trace: CFtpRawTransferOpData::Send() in state 2
>>> Command: PASV
>>> Trace: CFtpControlSocket::OnReceive()
>>> Response: 227 Entering Passive Mode (107,180,51,77,196,142)
>>> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
>>> Trace: CControlSocket::SendNextCommand()
>>> Trace: CFtpRawTransferOpData::Send() in state 4
>>> Trace: Binding data connection source IP to control connection source
>>> IP 192.168.12.117
>>> Command: STOR yearbarometer.png
>>> Trace: CTransferSocket::OnConnect
>>> Trace: CTlsSocketImpl::Handshake()
>>> Trace: Trying to resume existing TLS session.
>>> Trace: CTlsSocketImpl::ContinueHandshake()
>>> Trace: CFtpControlSocket::OnReceive()
>>> Response: 227 Entering Passive Mode (107,180,51,77,197,217)
>>> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
>>> Trace: CControlSocket::SendNextCommand()
>>> Trace: CFtpRawTransferOpData::Send() in state 4
>>> Trace: Binding data connection source IP to control connection source
>>> IP 192.168.12.117
>>> Command: STOR yearhilow.png
>>>
>>> On Monday, January 18, 2021 at 7:16:26 AM UTC-6 tke...@gmail.com wrote:
>>>
 Good to hear that Filezilla is working. We can use it to understand
 what the server is doing.

 Using Filezilla, go into its "Settings" (under the "Edit" menu). Then
 the "Debug" tab. There's a drop down list of message levels. Default is "0
 - None". Set it to "3- Verbose". Then click "OK".

 [image: image.png]

 Then use Filezilla again to transfer some files. This time, watch the
 window at top that tells you what Filezilla is doing. See if the client
 (Filezilla, in this case) is negotiating with the server. Tell us what you
 see, or, better, copy and paste it into a post.



 On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:

> Jan 17 21:30:44 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

Status: Resolving address of www.cliffandbuster.com
Status: Connecting to 107.180.51.77:21...
Status: Connection established, waiting for welcome message...
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Status: Logged in
Status: Retrieving directory listing of "/"...
Status: Directory listing of "/" successful
Status: Resolving address of www.cliffandbuster.com
Status: Connecting to 107.180.51.77:21...
Status: Connection established, waiting for welcome message...
Status: Initializing TLS...
Status: Verifying certificate...
Status: TLS connection established.
Status: Logged in
Status: Starting upload of /var/www/html/weewx/image.jpg
Status: File transfer successful, transferred 49,150 bytes in 1 second
Status: Retrieving directory listing of "/"...
Status: Directory listing of "/" successful

I disconnected and reconnected. Does filezilla trust the site now so we're 
not seeing all of the connection comments?

On Monday, January 18, 2021 at 10:37:24 AM UTC-6 tke...@gmail.com wrote:

> That's pretty much what I'm thinking, but I'm trying to get the evidence 
> from Filezilla. It should say that as it negotiates with the server. 
>
> FTP is 40 year old technology. It's amazing that there are still so many 
> incompatible versions out there.
>
> On Mon, Jan 18, 2021 at 8:34 AM Les Niles  wrote:
>
>> The server is responding to the PASV command by entering extended passive 
>> mode EPSV, which apparently is a legal response but which weewx/ftplib is 
>> not handling correctly. (I don’t have access to the code right now so can’t 
>> be more precise about where to fix.) The difference is that in EPSV mode 
>> the server doesn’t return an IP, just a port number. (The line “host, port 
>> = self.makepasv()” is not going to work.) 
>>
>> Apparently passive mode has been the default for ftplib since python 2.1, 
>> so maybe just skip trying to change to PASV entirely?
>>
>>   -Les
>>
>>
>> On Jan 18, 2021, at 7:21 AM, Rich Strle  wrote:
>>
>> 
>> Command: TYPE I
>> Trace: CFtpControlSocket::OnReceive()
>> Response: 200 TYPE is now 8-bit binary
>> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
>> Trace: CControlSocket::SendNextCommand()
>> Trace: CFtpRawTransferOpData::Send() in state 2
>> Command: PASV
>> Trace: CFtpControlSocket::OnReceive()
>> Response: 200 TYPE is now 8-bit binary
>> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
>> Trace: CControlSocket::SendNextCommand()
>> Trace: CFtpRawTransferOpData::Send() in state 2
>> Command: PASV
>> Trace: CFtpControlSocket::OnReceive()
>> Response: 227 Entering Passive Mode (107,180,51,77,196,142)
>> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
>> Trace: CControlSocket::SendNextCommand()
>> Trace: CFtpRawTransferOpData::Send() in state 4
>> Trace: Binding data connection source IP to control connection source IP 
>> 192.168.12.117
>> Command: STOR yearbarometer.png
>> Trace: CTransferSocket::OnConnect
>> Trace: CTlsSocketImpl::Handshake()
>> Trace: Trying to resume existing TLS session.
>> Trace: CTlsSocketImpl::ContinueHandshake()
>> Trace: CFtpControlSocket::OnReceive()
>> Response: 227 Entering Passive Mode (107,180,51,77,197,217)
>> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
>> Trace: CControlSocket::SendNextCommand()
>> Trace: CFtpRawTransferOpData::Send() in state 4
>> Trace: Binding data connection source IP to control connection source IP 
>> 192.168.12.117
>> Command: STOR yearhilow.png
>>
>> On Monday, January 18, 2021 at 7:16:26 AM UTC-6 tke...@gmail.com wrote:
>>
>>> Good to hear that Filezilla is working. We can use it to understand what 
>>> the server is doing.
>>>
>>> Using Filezilla, go into its "Settings" (under the "Edit" menu). Then 
>>> the "Debug" tab. There's a drop down list of message levels. Default is "0 
>>> - None". Set it to "3- Verbose". Then click "OK".
>>>
>>> [image: image.png]
>>>
>>> Then use Filezilla again to transfer some files. This time, watch the 
>>> window at top that tells you what Filezilla is doing. See if the client 
>>> (Filezilla, in this case) is negotiating with the server. Tell us what you 
>>> see, or, better, copy and paste it into a post.
>>>
>>>
>>>
>>> On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:
>>>
 Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
 uploading /var/www/html/weewx/yearradiation.png to server 
 www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
 (|||50458|)'
 Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
 ftpgenerator: (2): caught exception '': 229 
 Extended Passive Mode Entered (|||50458|)
 Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
    Traceback (most recent call last):
 Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
 Jan 17 21:30:45 pi-weather weewx[429] 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

That's pretty much what I'm thinking, but I'm trying to get the evidence
from Filezilla. It should say that as it negotiates with the server.

FTP is 40 year old technology. It's amazing that there are still so many
incompatible versions out there.

On Mon, Jan 18, 2021 at 8:34 AM Les Niles  wrote:

> The server is responding to the PASV command by entering extended passive
> mode EPSV, which apparently is a legal response but which weewx/ftplib is
> not handling correctly. (I don’t have access to the code right now so can’t
> be more precise about where to fix.) The difference is that in EPSV mode
> the server doesn’t return an IP, just a port number. (The line “host, port
> = self.makepasv()” is not going to work.)
>
> Apparently passive mode has been the default for ftplib since python 2.1,
> so maybe just skip trying to change to PASV entirely?
>
>   -Les
>
>
> On Jan 18, 2021, at 7:21 AM, Rich Strle  wrote:
>
> 
> Command: TYPE I
> Trace: CFtpControlSocket::OnReceive()
> Response: 200 TYPE is now 8-bit binary
> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 2
> Command: PASV
> Trace: CFtpControlSocket::OnReceive()
> Response: 200 TYPE is now 8-bit binary
> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 2
> Command: PASV
> Trace: CFtpControlSocket::OnReceive()
> Response: 227 Entering Passive Mode (107,180,51,77,196,142)
> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 4
> Trace: Binding data connection source IP to control connection source IP
> 192.168.12.117
> Command: STOR yearbarometer.png
> Trace: CTransferSocket::OnConnect
> Trace: CTlsSocketImpl::Handshake()
> Trace: Trying to resume existing TLS session.
> Trace: CTlsSocketImpl::ContinueHandshake()
> Trace: CFtpControlSocket::OnReceive()
> Response: 227 Entering Passive Mode (107,180,51,77,197,217)
> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 4
> Trace: Binding data connection source IP to control connection source IP
> 192.168.12.117
> Command: STOR yearhilow.png
>
> On Monday, January 18, 2021 at 7:16:26 AM UTC-6 tke...@gmail.com wrote:
>
>> Good to hear that Filezilla is working. We can use it to understand what
>> the server is doing.
>>
>> Using Filezilla, go into its "Settings" (under the "Edit" menu). Then the
>> "Debug" tab. There's a drop down list of message levels. Default is "0 -
>> None". Set it to "3- Verbose". Then click "OK".
>>
>> [image: image.png]
>>
>> Then use Filezilla again to transfer some files. This time, watch the
>> window at top that tells you what Filezilla is doing. See if the client
>> (Filezilla, in this case) is negotiating with the server. Tell us what you
>> see, or, better, copy and paste it into a post.
>>
>>
>>
>> On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:
>>
>>> Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed
>>> uploading /var/www/html/weewx/yearradiation.png to server
>>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered
>>> (|||50458|)'
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>> ftpgenerator: (2): caught exception '': 229
>>> Extended Passive Mode Entered (|||50458|)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    Traceback (most recent call last):
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    n = ftp_data.run()
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    ftp_server.storbinary(stor_cmd, fd)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    with self.transfercmd(cmd, rest) as conn:
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    return self.ntransfercmd(cmd, rest)[0]
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 359, in ntransfercmd
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    host, port = self.makepasv()
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Les Niles]

The server is responding to the PASV command by entering extended passive mode 
EPSV, which apparently is a legal response but which weewx/ftplib is not 
handling correctly. (I don’t have access to the code right now so can’t be more 
precise about where to fix.) The difference is that in EPSV mode the server 
doesn’t return an IP, just a port number. (The line “host, port = 
self.makepasv()” is not going to work.) 

Apparently passive mode has been the default for ftplib since python 2.1, so 
maybe just skip trying to change to PASV entirely?

  -Les


> On Jan 18, 2021, at 7:21 AM, Rich Strle  wrote:
> 
> 
> Command:  TYPE I
> Trace:CFtpControlSocket::OnReceive()
> Response: 200 TYPE is now 8-bit binary
> Trace:CFtpRawTransferOpData::ParseResponse() in state 1
> Trace:CControlSocket::SendNextCommand()
> Trace:CFtpRawTransferOpData::Send() in state 2
> Command:  PASV
> Trace:CFtpControlSocket::OnReceive()
> Response: 200 TYPE is now 8-bit binary
> Trace:CFtpRawTransferOpData::ParseResponse() in state 1
> Trace:CControlSocket::SendNextCommand()
> Trace:CFtpRawTransferOpData::Send() in state 2
> Command:  PASV
> Trace:CFtpControlSocket::OnReceive()
> Response: 227 Entering Passive Mode (107,180,51,77,196,142)
> Trace:CFtpRawTransferOpData::ParseResponse() in state 2
> Trace:CControlSocket::SendNextCommand()
> Trace:CFtpRawTransferOpData::Send() in state 4
> Trace:Binding data connection source IP to control connection source 
> IP 192.168.12.117
> Command:  STOR yearbarometer.png
> Trace:CTransferSocket::OnConnect
> Trace:CTlsSocketImpl::Handshake()
> Trace:Trying to resume existing TLS session.
> Trace:CTlsSocketImpl::ContinueHandshake()
> Trace:CFtpControlSocket::OnReceive()
> Response: 227 Entering Passive Mode (107,180,51,77,197,217)
> Trace:CFtpRawTransferOpData::ParseResponse() in state 2
> Trace:CControlSocket::SendNextCommand()
> Trace:CFtpRawTransferOpData::Send() in state 4
> Trace:Binding data connection source IP to control connection source 
> IP 192.168.12.117
> Command:  STOR yearhilow.png
> 
>> On Monday, January 18, 2021 at 7:16:26 AM UTC-6 tke...@gmail.com wrote:
>> Good to hear that Filezilla is working. We can use it to understand what the 
>> server is doing.
>> 
>> Using Filezilla, go into its "Settings" (under the "Edit" menu). Then the 
>> "Debug" tab. There's a drop down list of message levels. Default is "0 - 
>> None". Set it to "3- Verbose". Then click "OK".
>> 
>> 
>> 
>> Then use Filezilla again to transfer some files. This time, watch the window 
>> at top that tells you what Filezilla is doing. See if the client (Filezilla, 
>> in this case) is negotiating with the server. Tell us what you see, or, 
>> better, copy and paste it into a post.
>> 
>> 
>> 
>>> On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:
>>> Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
>>> uploading /var/www/html/weewx/yearradiation.png to server 
>>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>>> (|||50458|)'
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> ftpgenerator: (2): caught exception '': 229 
>>> Extended Passive Mode Entered (|||50458|)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>>   Traceback (most recent call last):
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>>   n = ftp_data.run()
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>>   ftp_server.storbinary(stor_cmd, fd)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>>   with self.transfercmd(cmd, rest) as conn:
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>>   return self.ntransfercmd(cmd, rest)[0]
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> File "/usr/lib/python3.7/ftplib.py", line 359, in ntransfercmd
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>>   host, port = self.makepasv()
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>>> File 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

What we want to see is the earlier chatter: where the client negotiates
with the server.

On Mon, Jan 18, 2021 at 7:21 AM Rich Strle  wrote:

> Command: TYPE I
> Trace: CFtpControlSocket::OnReceive()
> Response: 200 TYPE is now 8-bit binary
> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 2
> Command: PASV
> Trace: CFtpControlSocket::OnReceive()
> Response: 200 TYPE is now 8-bit binary
> Trace: CFtpRawTransferOpData::ParseResponse() in state 1
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 2
> Command: PASV
> Trace: CFtpControlSocket::OnReceive()
> Response: 227 Entering Passive Mode (107,180,51,77,196,142)
> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 4
> Trace: Binding data connection source IP to control connection source IP
> 192.168.12.117
> Command: STOR yearbarometer.png
> Trace: CTransferSocket::OnConnect
> Trace: CTlsSocketImpl::Handshake()
> Trace: Trying to resume existing TLS session.
> Trace: CTlsSocketImpl::ContinueHandshake()
> Trace: CFtpControlSocket::OnReceive()
> Response: 227 Entering Passive Mode (107,180,51,77,197,217)
> Trace: CFtpRawTransferOpData::ParseResponse() in state 2
> Trace: CControlSocket::SendNextCommand()
> Trace: CFtpRawTransferOpData::Send() in state 4
> Trace: Binding data connection source IP to control connection source IP
> 192.168.12.117
> Command: STOR yearhilow.png
>
> On Monday, January 18, 2021 at 7:16:26 AM UTC-6 tke...@gmail.com wrote:
>
>> Good to hear that Filezilla is working. We can use it to understand what
>> the server is doing.
>>
>> Using Filezilla, go into its "Settings" (under the "Edit" menu). Then the
>> "Debug" tab. There's a drop down list of message levels. Default is "0 -
>> None". Set it to "3- Verbose". Then click "OK".
>>
>> [image: image.png]
>>
>> Then use Filezilla again to transfer some files. This time, watch the
>> window at top that tells you what Filezilla is doing. See if the client
>> (Filezilla, in this case) is negotiating with the server. Tell us what you
>> see, or, better, copy and paste it into a post.
>>
>>
>>
>> On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:
>>
>>> Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed
>>> uploading /var/www/html/weewx/yearradiation.png to server
>>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered
>>> (|||50458|)'
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>> ftpgenerator: (2): caught exception '': 229
>>> Extended Passive Mode Entered (|||50458|)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    Traceback (most recent call last):
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    n = ftp_data.run()
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    ftp_server.storbinary(stor_cmd, fd)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    with self.transfercmd(cmd, rest) as conn:
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    return self.ntransfercmd(cmd, rest)[0]
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 359, in ntransfercmd
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    host, port = self.makepasv()
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 337, in makepasv
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    host, port = parse227(self.sendcmd('PASV'))
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>  File "/usr/lib/python3.7/ftplib.py", line 845, in parse227
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    raise error_reply(resp)
>>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>>    ftplib.error_reply: 229 Extended Passive Mode Entered (|||50458|)
>>> Jan 17 21:30:45 pi-weather weewx[429] DEBUG weewx.reportengine: Report
>>> 'RSYNC' not enabled. Skipping.
>>>
>>>
>>> On Sunday, January 17, 2021 at 9:28:38 PM UTC-6 Rich Strle wrote:
>>>
 I 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

Command: TYPE I
Trace: CFtpControlSocket::OnReceive()
Response: 200 TYPE is now 8-bit binary
Trace: CFtpRawTransferOpData::ParseResponse() in state 1
Trace: CControlSocket::SendNextCommand()
Trace: CFtpRawTransferOpData::Send() in state 2
Command: PASV
Trace: CFtpControlSocket::OnReceive()
Response: 200 TYPE is now 8-bit binary
Trace: CFtpRawTransferOpData::ParseResponse() in state 1
Trace: CControlSocket::SendNextCommand()
Trace: CFtpRawTransferOpData::Send() in state 2
Command: PASV
Trace: CFtpControlSocket::OnReceive()
Response: 227 Entering Passive Mode (107,180,51,77,196,142)
Trace: CFtpRawTransferOpData::ParseResponse() in state 2
Trace: CControlSocket::SendNextCommand()
Trace: CFtpRawTransferOpData::Send() in state 4
Trace: Binding data connection source IP to control connection source IP 
192.168.12.117
Command: STOR yearbarometer.png
Trace: CTransferSocket::OnConnect
Trace: CTlsSocketImpl::Handshake()
Trace: Trying to resume existing TLS session.
Trace: CTlsSocketImpl::ContinueHandshake()
Trace: CFtpControlSocket::OnReceive()
Response: 227 Entering Passive Mode (107,180,51,77,197,217)
Trace: CFtpRawTransferOpData::ParseResponse() in state 2
Trace: CControlSocket::SendNextCommand()
Trace: CFtpRawTransferOpData::Send() in state 4
Trace: Binding data connection source IP to control connection source IP 
192.168.12.117
Command: STOR yearhilow.png

On Monday, January 18, 2021 at 7:16:26 AM UTC-6 tke...@gmail.com wrote:

> Good to hear that Filezilla is working. We can use it to understand what 
> the server is doing.
>
> Using Filezilla, go into its "Settings" (under the "Edit" menu). Then the 
> "Debug" tab. There's a drop down list of message levels. Default is "0 - 
> None". Set it to "3- Verbose". Then click "OK".
>
> [image: image.png]
>
> Then use Filezilla again to transfer some files. This time, watch the 
> window at top that tells you what Filezilla is doing. See if the client 
> (Filezilla, in this case) is negotiating with the server. Tell us what you 
> see, or, better, copy and paste it into a post.
>
>
>
> On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:
>
>> Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
>> uploading /var/www/html/weewx/yearradiation.png to server 
>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>> (|||50458|)'
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
>> ftpgenerator: (2): caught exception '': 229 
>> Extended Passive Mode Entered (|||50458|)
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    Traceback (most recent call last):
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    n = ftp_data.run()
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    ftp_server.storbinary(stor_cmd, fd)
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    with self.transfercmd(cmd, rest) as conn:
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    return self.ntransfercmd(cmd, rest)[0]
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 359, in ntransfercmd
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    host, port = self.makepasv()
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 337, in makepasv
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    host, port = parse227(self.sendcmd('PASV'))
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>  File "/usr/lib/python3.7/ftplib.py", line 845, in parse227
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    raise error_reply(resp)
>> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>>    ftplib.error_reply: 229 Extended Passive Mode Entered (|||50458|)
>> Jan 17 21:30:45 pi-weather weewx[429] DEBUG weewx.reportengine: Report 
>> 'RSYNC' not enabled. Skipping.
>>
>>
>> On Sunday, January 17, 2021 at 9:28:38 PM UTC-6 Rich Strle wrote:
>>
>>> I installed FileZilla and was able to use the same user name and 
>>> password to upload files from /var/www/html/weewx/ to the same spot on 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

Good to hear that Filezilla is working. We can use it to understand what
the server is doing.

Using Filezilla, go into its "Settings" (under the "Edit" menu). Then the
"Debug" tab. There's a drop down list of message levels. Default is "0 -
None". Set it to "3- Verbose". Then click "OK".

[image: image.png]

Then use Filezilla again to transfer some files. This time, watch the
window at top that tells you what Filezilla is doing. See if the client
(Filezilla, in this case) is negotiating with the server. Tell us what you
see, or, better, copy and paste it into a post.



On Sun, Jan 17, 2021 at 7:33 PM Rich Strle  wrote:

> Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed
> uploading /var/www/html/weewx/yearradiation.png to server
> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered
> (|||50458|)'
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
> ftpgenerator: (2): caught exception '': 229
> Extended Passive Mode Entered (|||50458|)
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    Traceback (most recent call last):
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    n = ftp_data.run()
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    ftp_server.storbinary(stor_cmd, fd)
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    with self.transfercmd(cmd, rest) as conn:
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    return self.ntransfercmd(cmd, rest)[0]
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 359, in ntransfercmd
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    host, port = self.makepasv()
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 337, in makepasv
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    host, port = parse227(self.sendcmd('PASV'))
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>  File "/usr/lib/python3.7/ftplib.py", line 845, in parse227
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    raise error_reply(resp)
> Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
>    ftplib.error_reply: 229 Extended Passive Mode Entered (|||50458|)
> Jan 17 21:30:45 pi-weather weewx[429] DEBUG weewx.reportengine: Report
> 'RSYNC' not enabled. Skipping.
>
>
> On Sunday, January 17, 2021 at 9:28:38 PM UTC-6 Rich Strle wrote:
>
>> I installed FileZilla and was able to use the same user name and password
>> to upload files from /var/www/html/weewx/ to the same spot on my webserver.
>> I did get an error message Hostname does not match certificate but I've
>> gotten that before...
>>
>> On Sunday, January 17, 2021 at 7:24:45 PM UTC-6 tke...@gmail.com wrote:
>>
>>> Can you FTP using Filezilla? The goal here is to see if it's some
>>> firewall / network/ provider issue, or a problem peculiar to the Python FTP
>>> library.
>>>
>>> On Sun, Jan 17, 2021 at 10:04 AM Rich Strle  wrote:
>>>
 My bad, the ftp in whew still doesn't work. The Access Point only has
 an IPv6 number listed, it doesn't have an IPv4 number listed. My website
 provider only allows 1 sftp account at the root level and I was trying to
 avoid using that.

 On Sunday, January 17, 2021 at 11:41:18 AM UTC-6 Rich Strle wrote:

> I spoke with t-mobile again. They didn't say they did anything but all
> of a sudden ftp started working. I will continue to monitor.
>
> On Sunday, January 17, 2021 at 10:50:19 AM UTC-6 galfert wrote:
>
>> Anyone care to google "T-Mobile FTP"  You'll see that this is an
>> issue for everyone! My recommendation is to try to instead use SFTP.
>>
>>
>> On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:
>>
>>> I did as instructed. Attached is the log file after I made the
>>> change. I have a call into my provider to see if they are IPV6.
>>>
>>>
>>>
>>> On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com
>>> wrote:
>>>
 You definitely want passive mode (passive=1).

 Two things:

 1. By any chance, is your new provider using IPV6 (instead of

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

Jan 17 21:30:44 pi-weather weewx[429] ERROR weeutil.ftpupload: Failed 
uploading /var/www/html/weewx/yearradiation.png to server 
www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
(|||50458|)'
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine: 
ftpgenerator: (2): caught exception '': 229 
Extended Passive Mode Entered (|||50458|)
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   Traceback (most recent call last):
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   n = ftp_data.run()
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/share/weewx/weeutil/ftpupload.py", line 163, in run
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   ftp_server.storbinary(stor_cmd, fd)
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 504, in storbinary
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   with self.transfercmd(cmd, rest) as conn:
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 399, in transfercmd
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   return self.ntransfercmd(cmd, rest)[0]
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 359, in ntransfercmd
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   host, port = self.makepasv()
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 337, in makepasv
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   host, port = parse227(self.sendcmd('PASV'))
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
 File "/usr/lib/python3.7/ftplib.py", line 845, in parse227
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   raise error_reply(resp)
Jan 17 21:30:45 pi-weather weewx[429] ERROR weewx.reportengine:
   ftplib.error_reply: 229 Extended Passive Mode Entered (|||50458|)
Jan 17 21:30:45 pi-weather weewx[429] DEBUG weewx.reportengine: Report 
'RSYNC' not enabled. Skipping.


On Sunday, January 17, 2021 at 9:28:38 PM UTC-6 Rich Strle wrote:

> I installed FileZilla and was able to use the same user name and password 
> to upload files from /var/www/html/weewx/ to the same spot on my webserver. 
> I did get an error message Hostname does not match certificate but I've 
> gotten that before...
>
> On Sunday, January 17, 2021 at 7:24:45 PM UTC-6 tke...@gmail.com wrote:
>
>> Can you FTP using Filezilla? The goal here is to see if it's some 
>> firewall / network/ provider issue, or a problem peculiar to the Python FTP 
>> library.
>>
>> On Sun, Jan 17, 2021 at 10:04 AM Rich Strle  wrote:
>>
>>> My bad, the ftp in whew still doesn't work. The Access Point only has an 
>>> IPv6 number listed, it doesn't have an IPv4 number listed. My website 
>>> provider only allows 1 sftp account at the root level and I was trying to 
>>> avoid using that.
>>>
>>> On Sunday, January 17, 2021 at 11:41:18 AM UTC-6 Rich Strle wrote:
>>>
 I spoke with t-mobile again. They didn't say they did anything but all 
 of a sudden ftp started working. I will continue to monitor.

 On Sunday, January 17, 2021 at 10:50:19 AM UTC-6 galfert wrote:

> Anyone care to google "T-Mobile FTP"  You'll see that this is an 
> issue for everyone! My recommendation is to try to instead use SFTP.
>
>
> On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:
>
>> I did as instructed. Attached is the log file after I made the 
>> change. I have a call into my provider to see if they are IPV6.
>>
>>
>>
>> On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com 
>> wrote:
>>
>>> You definitely want passive mode (passive=1).
>>>
>>> Two things:
>>>
>>> 1. By any chance, is your new provider using IPV6 (instead of 
>>> the traditional IPV4)?
>>>
>>> 2. Set debug=2 in weewx.conf, then retry. This will put lots of 
>>> information in the log about what FTP is doing.
>>>
>>> -tk
>>>
>>> On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:
>>>
 Thanks for your response David but that didn't fix my issue. 

 It was set at 1. I stopped the weewx process, set the ftp to 0, 
 restarted weewx and it did not help. I changed it back to 1.

 On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com 
 wrote:

> Check out 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

I installed FileZilla and was able to use the same user name and password 
to upload files from /var/www/html/weewx/ to the same spot on my webserver. 
I did get an error message Hostname does not match certificate but I've 
gotten that before...

On Sunday, January 17, 2021 at 7:24:45 PM UTC-6 tke...@gmail.com wrote:

> Can you FTP using Filezilla? The goal here is to see if it's some firewall 
> / network/ provider issue, or a problem peculiar to the Python FTP library.
>
> On Sun, Jan 17, 2021 at 10:04 AM Rich Strle  wrote:
>
>> My bad, the ftp in whew still doesn't work. The Access Point only has an 
>> IPv6 number listed, it doesn't have an IPv4 number listed. My website 
>> provider only allows 1 sftp account at the root level and I was trying to 
>> avoid using that.
>>
>> On Sunday, January 17, 2021 at 11:41:18 AM UTC-6 Rich Strle wrote:
>>
>>> I spoke with t-mobile again. They didn't say they did anything but all 
>>> of a sudden ftp started working. I will continue to monitor.
>>>
>>> On Sunday, January 17, 2021 at 10:50:19 AM UTC-6 galfert wrote:
>>>
 Anyone care to google "T-Mobile FTP"  You'll see that this is an 
 issue for everyone! My recommendation is to try to instead use SFTP.


 On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:

> I did as instructed. Attached is the log file after I made the change. 
> I have a call into my provider to see if they are IPV6.
>
>
>
> On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com 
> wrote:
>
>> You definitely want passive mode (passive=1).
>>
>> Two things:
>>
>> 1. By any chance, is your new provider using IPV6 (instead of 
>> the traditional IPV4)?
>>
>> 2. Set debug=2 in weewx.conf, then retry. This will put lots of 
>> information in the log about what FTP is doing.
>>
>> -tk
>>
>> On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:
>>
>>> Thanks for your response David but that didn't fix my issue. 
>>>
>>> It was set at 1. I stopped the weewx process, set the ftp to 0, 
>>> restarted weewx and it did not help. I changed it back to 1.
>>>
>>> On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com 
>>> wrote:
>>>
 Check out http://weewx.com/docs/usersguide.htm#config_FTP and look 
 to add/adjust the passive setting in your weewx.conf config. 

 David 

 On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:

> I changed out my internet provider to t-mobile home internet 
> service and now I'm getting ftp errors. I tried connecting to the ftp 
> from 
> another computer and that worked. When my raspberry pi tries to 
> connect I 
> get errors. This was working fine before I switched providers. Any 
> ideas?
>
> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
> Attempting connection to www.cliffandbuster.com
> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
> Connected to www.cliffandbuster.com
> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: 
> Failed uploading /var/www/html/weewx/seasons.css to server 
> www.cliffandbuster.com. Reason: '229 Extended Passive Mode 
> Entered (|||50207|)'
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
> ftpgenerator: (1): caught exception '': 
> 229 
> Extended Passive Mode Entered (|||50207|)
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
>  Traceback (most recent call last):
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
>File "/usr/share/weewx/weewx/reportengine.py", line 
> 331, in 
> run
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
>  n = ftp_data.run()
>
> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, 
>>> send an email to weewx-user+...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com.
>>
> To view this discussion on the web visit 
>> 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

Can you FTP using Filezilla? The goal here is to see if it's some firewall
/ network/ provider issue, or a problem peculiar to the Python FTP library.

On Sun, Jan 17, 2021 at 10:04 AM Rich Strle  wrote:

> My bad, the ftp in whew still doesn't work. The Access Point only has an
> IPv6 number listed, it doesn't have an IPv4 number listed. My website
> provider only allows 1 sftp account at the root level and I was trying to
> avoid using that.
>
> On Sunday, January 17, 2021 at 11:41:18 AM UTC-6 Rich Strle wrote:
>
>> I spoke with t-mobile again. They didn't say they did anything but all of
>> a sudden ftp started working. I will continue to monitor.
>>
>> On Sunday, January 17, 2021 at 10:50:19 AM UTC-6 galfert wrote:
>>
>>> Anyone care to google "T-Mobile FTP"  You'll see that this is an
>>> issue for everyone! My recommendation is to try to instead use SFTP.
>>>
>>>
>>> On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:
>>>
 I did as instructed. Attached is the log file after I made the change.
 I have a call into my provider to see if they are IPV6.



 On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com
 wrote:

> You definitely want passive mode (passive=1).
>
> Two things:
>
> 1. By any chance, is your new provider using IPV6 (instead of
> the traditional IPV4)?
>
> 2. Set debug=2 in weewx.conf, then retry. This will put lots of
> information in the log about what FTP is doing.
>
> -tk
>
> On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:
>
>> Thanks for your response David but that didn't fix my issue.
>>
>> It was set at 1. I stopped the weewx process, set the ftp to 0,
>> restarted weewx and it did not help. I changed it back to 1.
>>
>> On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com
>> wrote:
>>
>>> Check out http://weewx.com/docs/usersguide.htm#config_FTP and look
>>> to add/adjust the passive setting in your weewx.conf config.
>>>
>>> David
>>>
>>> On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:
>>>
 I changed out my internet provider to t-mobile home internet
 service and now I'm getting ftp errors. I tried connecting to the ftp 
 from
 another computer and that worked. When my raspberry pi tries to 
 connect I
 get errors. This was working fine before I switched providers. Any 
 ideas?

 Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload:
 Attempting connection to www.cliffandbuster.com
 Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload:
 Connected to www.cliffandbuster.com
 Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload:
 Failed uploading /var/www/html/weewx/seasons.css to server
 www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered
 (|||50207|)'
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
 ftpgenerator: (1): caught exception '': 229
 Extended Passive Mode Entered (|||50207|)
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
  Traceback (most recent call last):
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
File "/usr/share/weewx/weewx/reportengine.py", line 
 331, in
 run
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
  n = ftp_data.run()

 --
>> You received this message because you are subscribed to the Google
>> Groups "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to weewx-user+...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/08999a97-41a4-4436-b59d-2f8793532fb6n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

My bad, the ftp in whew still doesn't work. The Access Point only has an 
IPv6 number listed, it doesn't have an IPv4 number listed. My website 
provider only allows 1 sftp account at the root level and I was trying to 
avoid using that.

On Sunday, January 17, 2021 at 11:41:18 AM UTC-6 Rich Strle wrote:

> I spoke with t-mobile again. They didn't say they did anything but all of 
> a sudden ftp started working. I will continue to monitor.
>
> On Sunday, January 17, 2021 at 10:50:19 AM UTC-6 galfert wrote:
>
>> Anyone care to google "T-Mobile FTP"  You'll see that this is an 
>> issue for everyone! My recommendation is to try to instead use SFTP.
>>
>>
>> On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:
>>
>>> I did as instructed. Attached is the log file after I made the change. I 
>>> have a call into my provider to see if they are IPV6.
>>>
>>>
>>>
>>> On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com wrote:
>>>
 You definitely want passive mode (passive=1).

 Two things:

 1. By any chance, is your new provider using IPV6 (instead of 
 the traditional IPV4)?

 2. Set debug=2 in weewx.conf, then retry. This will put lots of 
 information in the log about what FTP is doing.

 -tk

 On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:

> Thanks for your response David but that didn't fix my issue. 
>
> It was set at 1. I stopped the weewx process, set the ftp to 0, 
> restarted weewx and it did not help. I changed it back to 1.
>
> On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com 
> wrote:
>
>> Check out http://weewx.com/docs/usersguide.htm#config_FTP and look 
>> to add/adjust the passive setting in your weewx.conf config. 
>>
>> David 
>>
>> On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:
>>
>>> I changed out my internet provider to t-mobile home internet service 
>>> and now I'm getting ftp errors. I tried connecting to the ftp from 
>>> another 
>>> computer and that worked. When my raspberry pi tries to connect I get 
>>> errors. This was working fine before I switched providers. Any ideas?
>>>
>>> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
>>> Attempting connection to www.cliffandbuster.com
>>> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
>>> Connected to www.cliffandbuster.com
>>> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: 
>>> Failed uploading /var/www/html/weewx/seasons.css to server 
>>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>>> (|||50207|)'
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
>>> ftpgenerator: (1): caught exception '': 229 
>>> Extended Passive Mode Entered (|||50207|)
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>>    Traceback (most recent call last):
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, 
>>> in run
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>>    n = ftp_data.run()
>>>
>>> -- 
> You received this message because you are subscribed to the Google 
> Groups "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
>  
> 
> .
>


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/08999a97-41a4-4436-b59d-2f8793532fb6n%40googlegroups.com.

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

I spoke with t-mobile again. They didn't say they did anything but all of a 
sudden ftp started working. I will continue to monitor.

On Sunday, January 17, 2021 at 10:50:19 AM UTC-6 galfert wrote:

> Anyone care to google "T-Mobile FTP"  You'll see that this is an issue 
> for everyone! My recommendation is to try to instead use SFTP.
>
>
> On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:
>
>> I did as instructed. Attached is the log file after I made the change. I 
>> have a call into my provider to see if they are IPV6.
>>
>>
>>
>> On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com wrote:
>>
>>> You definitely want passive mode (passive=1).
>>>
>>> Two things:
>>>
>>> 1. By any chance, is your new provider using IPV6 (instead of 
>>> the traditional IPV4)?
>>>
>>> 2. Set debug=2 in weewx.conf, then retry. This will put lots of 
>>> information in the log about what FTP is doing.
>>>
>>> -tk
>>>
>>> On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:
>>>
 Thanks for your response David but that didn't fix my issue. 

 It was set at 1. I stopped the weewx process, set the ftp to 0, 
 restarted weewx and it did not help. I changed it back to 1.

 On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com wrote:

> Check out http://weewx.com/docs/usersguide.htm#config_FTP and look to 
> add/adjust the passive setting in your weewx.conf config. 
>
> David 
>
> On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:
>
>> I changed out my internet provider to t-mobile home internet service 
>> and now I'm getting ftp errors. I tried connecting to the ftp from 
>> another 
>> computer and that worked. When my raspberry pi tries to connect I get 
>> errors. This was working fine before I switched providers. Any ideas?
>>
>> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
>> Attempting connection to www.cliffandbuster.com
>> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
>> Connected to www.cliffandbuster.com
>> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: 
>> Failed uploading /var/www/html/weewx/seasons.css to server 
>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>> (|||50207|)'
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
>> ftpgenerator: (1): caught exception '': 229 
>> Extended Passive Mode Entered (|||50207|)
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>    Traceback (most recent call last):
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in 
>> run
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>    n = ftp_data.run()
>>
>> -- 
 You received this message because you are subscribed to the Google 
 Groups "weewx-user" group.
 To unsubscribe from this group and stop receiving emails from it, send 
 an email to weewx-user+...@googlegroups.com.
 To view this discussion on the web visit 
 https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
  
 
 .

>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1bf4f912-9199-4d46-b140-f2708402f8d0n%40googlegroups.com.

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[galfert]

Anyone care to google "T-Mobile FTP"  You'll see that this is an issue 
for everyone! My recommendation is to try to instead use SFTP.


On Sunday, January 17, 2021 at 11:41:25 AM UTC-5 Rich Strle wrote:

> I did as instructed. Attached is the log file after I made the change. I 
> have a call into my provider to see if they are IPV6.
>
>
>
> On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com wrote:
>
>> You definitely want passive mode (passive=1).
>>
>> Two things:
>>
>> 1. By any chance, is your new provider using IPV6 (instead of 
>> the traditional IPV4)?
>>
>> 2. Set debug=2 in weewx.conf, then retry. This will put lots of 
>> information in the log about what FTP is doing.
>>
>> -tk
>>
>> On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:
>>
>>> Thanks for your response David but that didn't fix my issue. 
>>>
>>> It was set at 1. I stopped the weewx process, set the ftp to 0, 
>>> restarted weewx and it did not help. I changed it back to 1.
>>>
>>> On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com wrote:
>>>
 Check out http://weewx.com/docs/usersguide.htm#config_FTP and look to 
 add/adjust the passive setting in your weewx.conf config. 

 David 

 On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:

> I changed out my internet provider to t-mobile home internet service 
> and now I'm getting ftp errors. I tried connecting to the ftp from 
> another 
> computer and that worked. When my raspberry pi tries to connect I get 
> errors. This was working fine before I switched providers. Any ideas?
>
> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
> Attempting connection to www.cliffandbuster.com
> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
> Connected to www.cliffandbuster.com
> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: 
> Failed uploading /var/www/html/weewx/seasons.css to server 
> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
> (|||50207|)'
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
> ftpgenerator: (1): caught exception '': 229 
> Extended Passive Mode Entered (|||50207|)
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
>  Traceback (most recent call last):
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
>File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
>  n = ftp_data.run()
>
> -- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to weewx-user+...@googlegroups.com.
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
>>>  
>>> 
>>> .
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/09a65e40-4345-476d-be29-84d6490d8199n%40googlegroups.com.

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

I did as instructed. Attached is the log file after I made the change. I 
have a call into my provider to see if they are IPV6.



On Sunday, January 17, 2021 at 10:17:33 AM UTC-6 tke...@gmail.com wrote:

> You definitely want passive mode (passive=1).
>
> Two things:
>
> 1. By any chance, is your new provider using IPV6 (instead of 
> the traditional IPV4)?
>
> 2. Set debug=2 in weewx.conf, then retry. This will put lots of 
> information in the log about what FTP is doing.
>
> -tk
>
> On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:
>
>> Thanks for your response David but that didn't fix my issue. 
>>
>> It was set at 1. I stopped the weewx process, set the ftp to 0, restarted 
>> weewx and it did not help. I changed it back to 1.
>>
>> On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com wrote:
>>
>>> Check out http://weewx.com/docs/usersguide.htm#config_FTP and look to 
>>> add/adjust the passive setting in your weewx.conf config. 
>>>
>>> David 
>>>
>>> On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:
>>>
 I changed out my internet provider to t-mobile home internet service 
 and now I'm getting ftp errors. I tried connecting to the ftp from another 
 computer and that worked. When my raspberry pi tries to connect I get 
 errors. This was working fine before I switched providers. Any ideas?

 Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
 Attempting connection to www.cliffandbuster.com
 Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
 Connected to www.cliffandbuster.com
 Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: Failed 
 uploading /var/www/html/weewx/seasons.css to server 
 www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
 (|||50207|)'
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
 ftpgenerator: (1): caught exception '': 229 
 Extended Passive Mode Entered (|||50207|)
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
  Traceback (most recent call last):
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
 Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:  
  n = ftp_data.run()

 -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx-user+...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/215595b0-70e1-4e1d-b3cd-bc723304b81cn%40googlegroups.com.
Jan 17 10:21:56 pi-weather weewx[20816] INFO weewx.manager: Starting backfill 
of daily summaries
Jan 17 10:21:56 pi-weather weewx[20816] DEBUG weewx.manager: Daily summary 
version is 2
Jan 17 10:21:56 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Getting 
archive packets since 2021-01-17 10:20:00 CST (1610900400)
Jan 17 10:21:56 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Gentle 
wake up of console successful
Jan 17 10:21:56 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Retrieving 
0 page(s); starting index= 0
Jan 17 10:21:56 pi-weather weewx[20816] INFO weewx.engine: Starting main packet 
loop.
Jan 17 10:22:00 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Retry #0 
failed
Jan 17 10:22:00 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Gentle 
wake up of console successful
Jan 17 10:22:00 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Requesting 
200 LOOP packets.
Jan 17 10:22:00 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Gentle 
wake up of console successful
Jan 17 10:28:34 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Requesting 
200 LOOP packets.
Jan 17 10:28:34 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Gentle 
wake up of console successful
Jan 17 10:30:01 pi-weather CRON[20868]: (pi) CMD 
(/etc/cron.d/image-processing.sh)
Jan 17 10:30:03 pi-weather CRON[20867]: (CRON) info (No MTA installed, 
discarding output)
Jan 17 10:30:14 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Getting 
archive packets since 2021-01-17 10:20:00 CST (1610900400)
Jan 17 10:30:18 pi-weather weewx[20816] DEBUG weewx.drivers.vantage: Retry #0 
failed
Jan 17 10:30:18 pi-weather weewx[20816] DEBUG 

Re: [weewx-user] Re: New internet provider - now ftp doesn't work

[Tom Keffer]

You definitely want passive mode (passive=1).

Two things:

1. By any chance, is your new provider using IPV6 (instead of
the traditional IPV4)?

2. Set debug=2 in weewx.conf, then retry. This will put lots of information
in the log about what FTP is doing.

-tk

On Sun, Jan 17, 2021 at 7:46 AM Rich Strle  wrote:

> Thanks for your response David but that didn't fix my issue.
>
> It was set at 1. I stopped the weewx process, set the ftp to 0, restarted
> weewx and it did not help. I changed it back to 1.
>
> On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com wrote:
>
>> Check out http://weewx.com/docs/usersguide.htm#config_FTP and look to
>> add/adjust the passive setting in your weewx.conf config.
>>
>> David
>>
>> On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:
>>
>>> I changed out my internet provider to t-mobile home internet service and
>>> now I'm getting ftp errors. I tried connecting to the ftp from another
>>> computer and that worked. When my raspberry pi tries to connect I get
>>> errors. This was working fine before I switched providers. Any ideas?
>>>
>>> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload:
>>> Attempting connection to www.cliffandbuster.com
>>> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload:
>>> Connected to www.cliffandbuster.com
>>> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: Failed
>>> uploading /var/www/html/weewx/seasons.css to server
>>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered
>>> (|||50207|)'
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>> ftpgenerator: (1): caught exception '': 229
>>> Extended Passive Mode Entered (|||50207|)
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>>    Traceback (most recent call last):
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>>    n = ftp_data.run()
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEBgem4NKDqfYg%3DU8nb%2BpCH_yXN9V6TGaz-wKOH_u-uDzw%40mail.gmail.com.

[weewx-user] Re: New internet provider - now ftp doesn't work

[Rich Strle]

Thanks for your response David but that didn't fix my issue. 

It was set at 1. I stopped the weewx process, set the ftp to 0, restarted 
weewx and it did not help. I changed it back to 1.

On Sunday, January 17, 2021 at 6:21:02 AM UTC-6 dav...@gmail.com wrote:

> Check out http://weewx.com/docs/usersguide.htm#config_FTP and look to 
> add/adjust the passive setting in your weewx.conf config. 
>
> David 
>
> On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:
>
>> I changed out my internet provider to t-mobile home internet service and 
>> now I'm getting ftp errors. I tried connecting to the ftp from another 
>> computer and that worked. When my raspberry pi tries to connect I get 
>> errors. This was working fine before I switched providers. Any ideas?
>>
>> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
>> Attempting connection to www.cliffandbuster.com
>> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
>> Connected to www.cliffandbuster.com
>> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: Failed 
>> uploading /var/www/html/weewx/seasons.css to server 
>> www.cliffandbuster.com. Reason: '229 Extended Passive Mode Entered 
>> (|||50207|)'
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
>> ftpgenerator: (1): caught exception '': 229 
>> Extended Passive Mode Entered (|||50207|)
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>    Traceback (most recent call last):
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
>> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>>    n = ftp_data.run()
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/ba3b1d83-b48b-4578-b7a5-85b3fe2e4fden%40googlegroups.com.

[weewx-user] Re: New internet provider - now ftp doesn't work

[David Levine]

Check out http://weewx.com/docs/usersguide.htm#config_FTP and look to 
add/adjust the passive setting in your weewx.conf config. 

David 

On Saturday, January 16, 2021 at 10:11:56 PM UTC-5 Rich Strle wrote:

> I changed out my internet provider to t-mobile home internet service and 
> now I'm getting ftp errors. I tried connecting to the ftp from another 
> computer and that worked. When my raspberry pi tries to connect I get 
> errors. This was working fine before I switched providers. Any ideas?
>
> Jan 16 21:01:25 pi-weather weewx[30706] DEBUG weeutil.ftpupload: 
> Attempting connection to www.cliffandbuster.com
> Jan 16 21:01:26 pi-weather weewx[30706] DEBUG weeutil.ftpupload: Connected 
> to www.cliffandbuster.com
> Jan 16 21:01:26 pi-weather weewx[30706] ERROR weeutil.ftpupload: Failed 
> uploading /var/www/html/weewx/seasons.css to server www.cliffandbuster.com. 
> Reason: '229 Extended Passive Mode Entered (|||50207|)'
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine: 
> ftpgenerator: (1): caught exception '': 229 
> Extended Passive Mode Entered (|||50207|)
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>    Traceback (most recent call last):
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>  File "/usr/share/weewx/weewx/reportengine.py", line 331, in run
> Jan 16 21:01:27 pi-weather weewx[30706] ERROR weewx.reportengine:
>    n = ftp_data.run()
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7384313e-ab89-48b8-85d1-b07c14964143n%40googlegroups.com.