[weewx-user] Re: Weewx not picking up rain from ecowitt

[Peter Peter]

Thanks Gary. I did have it there but as I said it was something I had done. 
I have been creating backups of the config as I have been altering things 
and used the incorrect file. Looks like its showing a bit of data now so I 
will keep watching.
Many thanks

On Thursday, March 23, 2023 at 1:13:41 PM UTC+11 gjr80 wrote:

> Unfortunately it makes it a little difficult to be certain what fields are 
> there and what fields are missing. Assuming that rain and rainRate are 
> missing, but p_rainRate and (I suspect) p_yearRain are present, this 
> suggests that the field map has not been altered as per my first post. Did 
> you add a [[field_map_extensions]] stanza to weewx.conf as per my first 
> post? If not you will need to add it and restart WeeWX/try the above checks 
> again.
>
> Gary
>
> On Thursday, 23 March 2023 at 09:41:40 UTC+10 sale...@gmail.com wrote:
>
> I just did a screen copy from a terminal that I have going with ssh
>
> 2023-03-22 23:19:02 UTC (1679527142): 'dateTime': '1679527142', 
> 'daymaxwind': '4.1', '
> '64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
> 'lightning_distance'
> ning_last_det_time': '1679527051', 'lightning_strike_count': 'None', 
> 'lightningcount':
> ity': '3210.0', 'outHumidity': '96', 'outTemp': '15.1', 'p_dayRain': 
> '2.6', 'p_monthRa
> _rain': 'None', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
> '5.6', 'p_ye
> , 'pressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
> 'soilMoist2': '22'
> : '68', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': 
> '0', 'wh31_
>  'wh51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
> 'wh51_ch2_sig':
> _batt': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
> 'windDir': '240
>  '1.7', 'windSpeed': '0.9', 'ws90_batt': '3.2', 'ws90_sig': '4'
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/45a000d2-80d6-4add-a9e2-5b87895cd81cn%40googlegroups.com.

[weewx-user] Re: Weewx not picking up rain from ecowitt

[gjr80]

Unfortunately it makes it a little difficult to be certain what fields are 
there and what fields are missing. Assuming that rain and rainRate are 
missing, but p_rainRate and (I suspect) p_yearRain are present, this 
suggests that the field map has not been altered as per my first post. Did 
you add a [[field_map_extensions]] stanza to weewx.conf as per my first 
post? If not you will need to add it and restart WeeWX/try the above checks 
again.

Gary

On Thursday, 23 March 2023 at 09:41:40 UTC+10 sale...@gmail.com wrote:

I just did a screen copy from a terminal that I have going with ssh


2023-03-22 23:19:02 UTC (1679527142): 'dateTime': '1679527142', 
'daymaxwind': '4.1', '
'64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
'lightning_distance'
ning_last_det_time': '1679527051', 'lightning_strike_count': 'None', 
'lightningcount':
ity': '3210.0', 'outHumidity': '96', 'outTemp': '15.1', 'p_dayRain': '2.6', 
'p_monthRa
_rain': 'None', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
'5.6', 'p_ye
, 'pressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
'soilMoist2': '22'
: '68', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': 
'0', 'wh31_
 'wh51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
'wh51_ch2_sig':
_batt': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
'windDir': '240
 '1.7', 'windSpeed': '0.9', 'ws90_batt': '3.2', 'ws90_sig': '4'

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8247354b-2a6e-494d-bce3-3337e21468bfn%40googlegroups.com.

[weewx-user] Re: Weewx not picking up rain from ecowitt

[Peter Peter]

I just did a screen copy from a terminal that I have going with ssh


On Thursday, March 23, 2023 at 10:34:01 AM UTC+11 gjr80 wrote:

> Each line in the --test-driver output appears to be truncated:
>
> Gary
> On Thursday, 23 March 2023 at 09:30:42 UTC+10 sale...@gmail.com wrote:
>
>> I included how I ran the command in the second part just incase its 
>> something I am doing
>>
>> Ok here is the first part 
>>
>> test driver
>>
>> Using configuration file /etc/weewx/weewx.conf
>> debug level is '1'
>>
>> IP address obtained from station config
>> Port number obtained from station config
>> Battery state filtering ('False') using the default
>>
>> Interrogating GW2000 at 192.168.1.110:45000
>>
>> 2023-03-22 23:19:02 UTC (1679527142): 'dateTime': '1679527142', 
>> 'daymaxwind': '4.1', '
>> '64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
>> 'lightning_distance'
>> ning_last_det_time': '1679527051', 'lightning_strike_count': 'None', 
>> 'lightningcount':
>> ity': '3210.0', 'outHumidity': '96', 'outTemp': '15.1', 'p_dayRain': 
>> '2.6', 'p_monthRa
>> _rain': 'None', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
>> '5.6', 'p_ye
>> , 'pressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
>> 'soilMoist2': '22'
>> : '68', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 
>> 'wh31_ch1_batt': '0', 'wh31_
>>  'wh51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
>> 'wh51_ch2_sig':
>> _batt': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
>> 'windDir': '240
>>  '1.7', 'windSpeed': '0.9', 'ws90_batt': '3.2', 'ws90_sig': '4'
>> 2023-03-22 23:19:22 UTC (1679527162): 'dateTime': '1679527162', 
>> 'daymaxwind': '4.1', '
>> '64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
>> 'lightning_distance'
>> ning_last_det_time': '1679527051', 'lightning_strike_count': '0', 
>> 'lightningcount': '5
>> ': '3080.0', 'outHumidity': '96', 'outTemp': '15.0', 'p_dayRain': '2.6', 
>> 'p_monthRain'
>> in': '0.0', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
>> '5.6', 'p_yearRa
>> ressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
>> 'soilMoist2': '22', 's
>> 8', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': 
>> '0', 'wh31_ch1_
>> 51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
>> 'wh51_ch2_sig': '4',
>> t': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
>> 'windDir': '273', '
>> 3', 'windSpeed': '1.0', 'ws90_batt': '3.2', 'ws90_sig': '4'
>>
>>
>> second part root@mail:/home# PYTHONPATH=/usr/share/weewx python3 -m 
>> user.gw1000 --live-data
>> Using configuration file /etc/weewx/weewx.conf
>> debug level is '1'
>>
>> IP address obtained from station config
>> Port number obtained from station config
>> Battery state filtering ('False') using the default
>>
>> Interrogating GW2000 at 192.168.1.110:45000
>>
>> Displaying data using the WeeWX METRIC unit group.
>>
>> GW2000 live sensor data (2023-03-22 23:27:59 UTC (1679527679)): 
>> 'absbarometer': '944.50', 'annual_reset': '0.00', 'day_reset': 
>> '0.00', 'daymaxwind': '14.76', 'gain0': '1.00', 'gain1': 
>> '1.00', 'gain2': '1.00', 'gain3': '1.00', 'gain4': '1.00', 
>> 'gain5': '1.00', 'gain6': '1.00', 'gain7': '1.00', 'gain8': 
>> '1.00', 'gain9': '1.00', 'gustspeed': '5.04', 'humid1': 
>> '64.00', 'inhumid': '65.00', 'intemp': '20.70', 'light': 
>> '2800.00', 'lightningcount': '10.00', 'lightningdettime': 
>> '22-Mar-2023 23:27', 'lightningdist': '12.00', 'outhumid': '98.00', 
>> 'outtemp': '14.50', 'p_rainday': '0.44', 'p_rainevent': '0.69', 
>> 'p_rainmonth': '1.01', 'p_rainrate': '1.26', 'p_rainweek': 
>> '0.74', 'p_rainyear': '1.01', 'rain_source': '2.00', 
>> 'relbarometer': '944.50', 'soilmoist1': '44.00', 'soilmoist2': 
>> '24.00', 'soilmoist7': '73.00', 'temp1': '20.80', 'uv': 
>> '0.00', 'uvi': '0.00', 'week_reset': '0.00', 'wh31_ch1_batt': 
>> '0.00', 'wh31_ch1_sig': '4.00', 'wh51_ch1_batt': '1.60', 
>> 'wh51_ch1_sig': '4.00', 'wh51_ch2_batt': '1.60', 'wh51_ch2_sig': 
>> '4.00', 'wh51_ch7_batt': '1.50', 'wh51_ch7_sig': '4.00', 
>> 'wh57_batt': '5.00', 'wh57_sig': '4.00', 'winddir': '279.00', 
>> 'windspeed': '2.16', 'ws90_batt': '3.20', 'ws90_sig': '4.00'
>> On Thursday, March 23, 2023 at 10:07:09 AM UTC+11 gjr80 wrote:
>>
>>> There are a couple of checks you can do to confirm the gateway device is 
>>> working and WeeWX is receiving the expected data. The first check is to run 
>>> the driver directly with the --live-data command line option. This will 
>>> display the data received by the gateway device before the data is mapped 
>>> to any WeeWX field. This proves the gateway device is correctly talking to 
>>> the sensors. The second check is to again run the driver directly but this 
>>> time with the --test-dr

[weewx-user] Re: Weewx not picking up rain from ecowitt

[gjr80]

Each line in the --test-driver output appears to be truncated:

Gary
On Thursday, 23 March 2023 at 09:30:42 UTC+10 sale...@gmail.com wrote:

> I included how I ran the command in the second part just incase its 
> something I am doing
>
> Ok here is the first part 
>
> test driver
>
> Using configuration file /etc/weewx/weewx.conf
> debug level is '1'
>
> IP address obtained from station config
> Port number obtained from station config
> Battery state filtering ('False') using the default
>
> Interrogating GW2000 at 192.168.1.110:45000
>
> 2023-03-22 23:19:02 UTC (1679527142): 'dateTime': '1679527142', 
> 'daymaxwind': '4.1', '
> '64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
> 'lightning_distance'
> ning_last_det_time': '1679527051', 'lightning_strike_count': 'None', 
> 'lightningcount':
> ity': '3210.0', 'outHumidity': '96', 'outTemp': '15.1', 'p_dayRain': 
> '2.6', 'p_monthRa
> _rain': 'None', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
> '5.6', 'p_ye
> , 'pressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
> 'soilMoist2': '22'
> : '68', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': 
> '0', 'wh31_
>  'wh51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
> 'wh51_ch2_sig':
> _batt': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
> 'windDir': '240
>  '1.7', 'windSpeed': '0.9', 'ws90_batt': '3.2', 'ws90_sig': '4'
> 2023-03-22 23:19:22 UTC (1679527162): 'dateTime': '1679527162', 
> 'daymaxwind': '4.1', '
> '64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
> 'lightning_distance'
> ning_last_det_time': '1679527051', 'lightning_strike_count': '0', 
> 'lightningcount': '5
> ': '3080.0', 'outHumidity': '96', 'outTemp': '15.0', 'p_dayRain': '2.6', 
> 'p_monthRain'
> in': '0.0', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
> '5.6', 'p_yearRa
> ressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
> 'soilMoist2': '22', 's
> 8', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': 
> '0', 'wh31_ch1_
> 51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
> 'wh51_ch2_sig': '4',
> t': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
> 'windDir': '273', '
> 3', 'windSpeed': '1.0', 'ws90_batt': '3.2', 'ws90_sig': '4'
>
>
> second part root@mail:/home# PYTHONPATH=/usr/share/weewx python3 -m 
> user.gw1000 --live-data
> Using configuration file /etc/weewx/weewx.conf
> debug level is '1'
>
> IP address obtained from station config
> Port number obtained from station config
> Battery state filtering ('False') using the default
>
> Interrogating GW2000 at 192.168.1.110:45000
>
> Displaying data using the WeeWX METRIC unit group.
>
> GW2000 live sensor data (2023-03-22 23:27:59 UTC (1679527679)): 
> 'absbarometer': '944.50', 'annual_reset': '0.00', 'day_reset': 
> '0.00', 'daymaxwind': '14.76', 'gain0': '1.00', 'gain1': 
> '1.00', 'gain2': '1.00', 'gain3': '1.00', 'gain4': '1.00', 
> 'gain5': '1.00', 'gain6': '1.00', 'gain7': '1.00', 'gain8': 
> '1.00', 'gain9': '1.00', 'gustspeed': '5.04', 'humid1': 
> '64.00', 'inhumid': '65.00', 'intemp': '20.70', 'light': 
> '2800.00', 'lightningcount': '10.00', 'lightningdettime': 
> '22-Mar-2023 23:27', 'lightningdist': '12.00', 'outhumid': '98.00', 
> 'outtemp': '14.50', 'p_rainday': '0.44', 'p_rainevent': '0.69', 
> 'p_rainmonth': '1.01', 'p_rainrate': '1.26', 'p_rainweek': 
> '0.74', 'p_rainyear': '1.01', 'rain_source': '2.00', 
> 'relbarometer': '944.50', 'soilmoist1': '44.00', 'soilmoist2': 
> '24.00', 'soilmoist7': '73.00', 'temp1': '20.80', 'uv': 
> '0.00', 'uvi': '0.00', 'week_reset': '0.00', 'wh31_ch1_batt': 
> '0.00', 'wh31_ch1_sig': '4.00', 'wh51_ch1_batt': '1.60', 
> 'wh51_ch1_sig': '4.00', 'wh51_ch2_batt': '1.60', 'wh51_ch2_sig': 
> '4.00', 'wh51_ch7_batt': '1.50', 'wh51_ch7_sig': '4.00', 
> 'wh57_batt': '5.00', 'wh57_sig': '4.00', 'winddir': '279.00', 
> 'windspeed': '2.16', 'ws90_batt': '3.20', 'ws90_sig': '4.00'
> On Thursday, March 23, 2023 at 10:07:09 AM UTC+11 gjr80 wrote:
>
>> There are a couple of checks you can do to confirm the gateway device is 
>> working and WeeWX is receiving the expected data. The first check is to run 
>> the driver directly with the --live-data command line option. This will 
>> display the data received by the gateway device before the data is mapped 
>> to any WeeWX field. This proves the gateway device is correctly talking to 
>> the sensors. The second check is to again run the driver directly but this 
>> time with the --test-driver command line option. This will result in the 
>> driver emitting loop packets to the console. This again proves the gateway 
>> device is talking to the sensors, but also proves the mapping of gateway 
>> device data to WeeWX fields. I

[weewx-user] Re: Weewx not picking up rain from ecowitt

[Peter Peter]

I included how I ran the command in the second part just incase its 
something I am doing

Ok here is the first part 

test driver

Using configuration file /etc/weewx/weewx.conf
debug level is '1'

IP address obtained from station config
Port number obtained from station config
Battery state filtering ('False') using the default

Interrogating GW2000 at 192.168.1.110:45000

2023-03-22 23:19:02 UTC (1679527142): 'dateTime': '1679527142', 
'daymaxwind': '4.1', '
'64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
'lightning_distance'
ning_last_det_time': '1679527051', 'lightning_strike_count': 'None', 
'lightningcount':
ity': '3210.0', 'outHumidity': '96', 'outTemp': '15.1', 'p_dayRain': '2.6', 
'p_monthRa
_rain': 'None', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
'5.6', 'p_ye
, 'pressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
'soilMoist2': '22'
: '68', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': 
'0', 'wh31_
 'wh51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
'wh51_ch2_sig':
_batt': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
'windDir': '240
 '1.7', 'windSpeed': '0.9', 'ws90_batt': '3.2', 'ws90_sig': '4'
2023-03-22 23:19:22 UTC (1679527162): 'dateTime': '1679527162', 
'daymaxwind': '4.1', '
'64', 'extraTemp1': '20.8', 'inHumidity': '66', 'inTemp': '20.6', 
'lightning_distance'
ning_last_det_time': '1679527051', 'lightning_strike_count': '0', 
'lightningcount': '5
': '3080.0', 'outHumidity': '96', 'outTemp': '15.0', 'p_dayRain': '2.6', 
'p_monthRain'
in': '0.0', 'p_rainRate': '15.0', 'p_stormRain': '5.1', 'p_weekRain': 
'5.6', 'p_yearRa
ressure': '944.3', 'relbarometer': '944.3', 'soilMoist1': '44', 
'soilMoist2': '22', 's
8', 'usUnits': '17', 'UV': '0', 'uvradiation': '0.0', 'wh31_ch1_batt': '0', 
'wh31_ch1_
51_ch1_batt': '1.6', 'wh51_ch1_sig': '4', 'wh51_ch2_batt': '1.6', 
'wh51_ch2_sig': '4',
t': '1.5', 'wh51_ch7_sig': '4', 'wh57_batt': '5', 'wh57_sig': '4', 
'windDir': '273', '
3', 'windSpeed': '1.0', 'ws90_batt': '3.2', 'ws90_sig': '4'


second part root@mail:/home# PYTHONPATH=/usr/share/weewx python3 -m 
user.gw1000 --live-data
Using configuration file /etc/weewx/weewx.conf
debug level is '1'

IP address obtained from station config
Port number obtained from station config
Battery state filtering ('False') using the default

Interrogating GW2000 at 192.168.1.110:45000

Displaying data using the WeeWX METRIC unit group.

GW2000 live sensor data (2023-03-22 23:27:59 UTC (1679527679)): 
'absbarometer': '944.50', 'annual_reset': '0.00', 'day_reset': 
'0.00', 'daymaxwind': '14.76', 'gain0': '1.00', 'gain1': 
'1.00', 'gain2': '1.00', 'gain3': '1.00', 'gain4': '1.00', 
'gain5': '1.00', 'gain6': '1.00', 'gain7': '1.00', 'gain8': 
'1.00', 'gain9': '1.00', 'gustspeed': '5.04', 'humid1': 
'64.00', 'inhumid': '65.00', 'intemp': '20.70', 'light': 
'2800.00', 'lightningcount': '10.00', 'lightningdettime': 
'22-Mar-2023 23:27', 'lightningdist': '12.00', 'outhumid': '98.00', 
'outtemp': '14.50', 'p_rainday': '0.44', 'p_rainevent': '0.69', 
'p_rainmonth': '1.01', 'p_rainrate': '1.26', 'p_rainweek': 
'0.74', 'p_rainyear': '1.01', 'rain_source': '2.00', 
'relbarometer': '944.50', 'soilmoist1': '44.00', 'soilmoist2': 
'24.00', 'soilmoist7': '73.00', 'temp1': '20.80', 'uv': 
'0.00', 'uvi': '0.00', 'week_reset': '0.00', 'wh31_ch1_batt': 
'0.00', 'wh31_ch1_sig': '4.00', 'wh51_ch1_batt': '1.60', 
'wh51_ch1_sig': '4.00', 'wh51_ch2_batt': '1.60', 'wh51_ch2_sig': 
'4.00', 'wh51_ch7_batt': '1.50', 'wh51_ch7_sig': '4.00', 
'wh57_batt': '5.00', 'wh57_sig': '4.00', 'winddir': '279.00', 
'windspeed': '2.16', 'ws90_batt': '3.20', 'ws90_sig': '4.00'
On Thursday, March 23, 2023 at 10:07:09 AM UTC+11 gjr80 wrote:

> There are a couple of checks you can do to confirm the gateway device is 
> working and WeeWX is receiving the expected data. The first check is to run 
> the driver directly with the --live-data command line option. This will 
> display the data received by the gateway device before the data is mapped 
> to any WeeWX field. This proves the gateway device is correctly talking to 
> the sensors. The second check is to again run the driver directly but this 
> time with the --test-driver command line option. This will result in the 
> driver emitting loop packets to the console. This again proves the gateway 
> device is talking to the sensors, but also proves the mapping of gateway 
> device data to WeeWX fields. If you like, it shows what data the driver 
> will send to WeeWX. The final check is to run WeeWX directly. This check 
> proves the sensors are communicating with the gateway device, the driver is 
> mapping the gateway device data to WeeWX fields and that WeeWX is receiving 
> the loop packet data from the gateway dev

[weewx-user] Re: Weewx not picking up rain from ecowitt

[gjr80]

There are a couple of checks you can do to confirm the gateway device is 
working and WeeWX is receiving the expected data. The first check is to run 
the driver directly with the --live-data command line option. This will 
display the data received by the gateway device before the data is mapped 
to any WeeWX field. This proves the gateway device is correctly talking to 
the sensors. The second check is to again run the driver directly but this 
time with the --test-driver command line option. This will result in the 
driver emitting loop packets to the console. This again proves the gateway 
device is talking to the sensors, but also proves the mapping of gateway 
device data to WeeWX fields. If you like, it shows what data the driver 
will send to WeeWX. The final check is to run WeeWX directly. This check 
proves the sensors are communicating with the gateway device, the driver is 
mapping the gateway device data to WeeWX fields and that WeeWX is receiving 
the loop packet data from the gateway device driver. When running WeeWX 
directly you should see rainfall data appearing in WeeWX rain related 
fields, eg rain and rainRate. If this is not the case then it is unlikely 
that any WeeWX generated outputs (reports, uploads etc) will contain rain 
related data.

Running the latter two of above checks are covered in the Gateway driver 
readme 
.
 
Running the driver directly with the --live-data command line option is not 
covered in the readme, but it is identical to running the driver directly 
with the --test-driver command line option you just need to substitute the 
--live-data command line option. You can also use the --help command line 
option when running the driver directly to display details of each 
available command line option.

Gary

On Thursday, 23 March 2023 at 05:40:27 UTC+10 sale...@gmail.com wrote:

> Hey again Garry. I am trying to work out if this is a weewx or weather34 
> issue. I can see as mentioned above the rain (or what I believe is the rain 
> figures) in the loop but when I went to my cwop page after I went home it 
> shows no rain either and that gets fed from Weewx. The wunderground page 
> that gets fed directly from the GW2000 shows the rain.
>
> I am happy to post any logs etc if that helps or look at anything if you 
> can point me in that direction.
>
> On Wednesday, March 22, 2023 at 12:17:58 PM UTC+11 Peter Peter wrote:
>
>> Thanks Gary. I was trying to beat you back here but alas I didnt. I did a 
>> search on the gw2000 and found some posts and like you suggested here ran 
>> Weewx directly and can see both the rain in the loop and rec so that parts 
>> seems ok. I will do a bit more research and see what I can find. I have 
>> been trying the Weather34 skin/web stuff and thats how I noticed it and 
>> then went and looked at other stuff. It gives me something to tinker with
>>
>> On Wednesday, March 22, 2023 at 11:47:10 AM UTC+11 gjr80 wrote:
>>
>>> On Wednesday, 22 March 2023 at 10:05:31 UTC+10 sale...@gmail.com wrote:
>>>
>>> Hey all.
>>>
>>> I have been running Weewx together with my Ecowitt and using the GW1000 
>>> setup. My base unit is actually a GW2000C_V2.2.3C
>>>
>>> When I initially set it up I ran it in simulator mode and all seemed ok
>>>
>>> I have been waiting for rain and we have some today but it appears Weewx 
>>> isnt picking up the rain info. The last update of the rain data in relation 
>>> the the graphics was over a week ago and thats when I changed from 
>>> Simulator to real. At that stage I deleted the database and let it start.
>>>
>>>  
>>> What sensor is connected to your GW2000 and reporting rain? I'm guessing 
>>> it is a WS90? The GW2000 (and other Ecowitt gateway devices) simultaneously 
>>> support traditional tipping type rain gauges (eg WH40) as well as piezo 
>>> based WS90. A default install of the Ecowitt Gateway driver will map 
>>> tipping rain gauge data through to WeeWX. If using a piezo based sensor (eg 
>>> WS90) then the piezo rain data is passed through to WeeWX, but it must be 
>>> manually mapped to suitable WeeWX fields. If you do indeed have a WS90 (and 
>>> no other rain gauge) try adding a [[field_map_extensions]] stanza to 
>>> [GW1000] in weewx.conf as follows:
>>>
>>> [GW1000]
>>> 
>>> [[field_map_extensions]]
>>> rain = p_rain
>>> stormRain = p_rainevent
>>> rainRate = p_rainrate
>>> dayRain = p_rainday
>>> weekRain = p_rainweek
>>> monthRain = p_rainmonth
>>> yearRain = p_rainyear 
>>>  
>>> Stop WeeWX if it is running and try running WeeWX directly 
>>> , you should see 
>>> rainfall data appearing in the usual WeeWX rain fields. If you do indeed 
>>> see rainfall data then stop WeeWX and restart it as a daemon.
>>>
>>> If you don't have a WS90 or have multiple rain gauges then some 
>>> additi

[weewx-user] Re: Weewx not picking up rain from ecowitt

[Peter Peter]

And a link to the Weewx webpages hosted on a different server uploaded via 
ftp https://weewx.secs.net.au/index.html

On Thursday, March 23, 2023 at 6:40:27 AM UTC+11 Peter Peter wrote:

> Hey again Garry. I am trying to work out if this is a weewx or weather34 
> issue. I can see as mentioned above the rain (or what I believe is the rain 
> figures) in the loop but when I went to my cwop page after I went home it 
> shows no rain either and that gets fed from Weewx. The wunderground page 
> that gets fed directly from the GW2000 shows the rain.
>
> I am happy to post any logs etc if that helps or look at anything if you 
> can point me in that direction.
>
> On Wednesday, March 22, 2023 at 12:17:58 PM UTC+11 Peter Peter wrote:
>
>> Thanks Gary. I was trying to beat you back here but alas I didnt. I did a 
>> search on the gw2000 and found some posts and like you suggested here ran 
>> Weewx directly and can see both the rain in the loop and rec so that parts 
>> seems ok. I will do a bit more research and see what I can find. I have 
>> been trying the Weather34 skin/web stuff and thats how I noticed it and 
>> then went and looked at other stuff. It gives me something to tinker with
>>
>> On Wednesday, March 22, 2023 at 11:47:10 AM UTC+11 gjr80 wrote:
>>
>>> On Wednesday, 22 March 2023 at 10:05:31 UTC+10 sale...@gmail.com wrote:
>>>
>>> Hey all.
>>>
>>> I have been running Weewx together with my Ecowitt and using the GW1000 
>>> setup. My base unit is actually a GW2000C_V2.2.3C
>>>
>>> When I initially set it up I ran it in simulator mode and all seemed ok
>>>
>>> I have been waiting for rain and we have some today but it appears Weewx 
>>> isnt picking up the rain info. The last update of the rain data in relation 
>>> the the graphics was over a week ago and thats when I changed from 
>>> Simulator to real. At that stage I deleted the database and let it start.
>>>
>>>  
>>> What sensor is connected to your GW2000 and reporting rain? I'm guessing 
>>> it is a WS90? The GW2000 (and other Ecowitt gateway devices) simultaneously 
>>> support traditional tipping type rain gauges (eg WH40) as well as piezo 
>>> based WS90. A default install of the Ecowitt Gateway driver will map 
>>> tipping rain gauge data through to WeeWX. If using a piezo based sensor (eg 
>>> WS90) then the piezo rain data is passed through to WeeWX, but it must be 
>>> manually mapped to suitable WeeWX fields. If you do indeed have a WS90 (and 
>>> no other rain gauge) try adding a [[field_map_extensions]] stanza to 
>>> [GW1000] in weewx.conf as follows:
>>>
>>> [GW1000]
>>> 
>>> [[field_map_extensions]]
>>> rain = p_rain
>>> stormRain = p_rainevent
>>> rainRate = p_rainrate
>>> dayRain = p_rainday
>>> weekRain = p_rainweek
>>> monthRain = p_rainmonth
>>> yearRain = p_rainyear 
>>>  
>>> Stop WeeWX if it is running and try running WeeWX directly 
>>> , you should see 
>>> rainfall data appearing in the usual WeeWX rain fields. If you do indeed 
>>> see rainfall data then stop WeeWX and restart it as a daemon.
>>>
>>> If you don't have a WS90 or have multiple rain gauges then some 
>>> additional changes will be required. If this is the case, or the above does 
>>> not work, post back here.
>>>  
>>>
>>> The only thing I notice in the debug syslog entry that may be related is 
>>> DEBUG user.gw1000: Unknown field address '7B' detected. Remaining data 
>>> '00' ignored.
>>>
>>>  
>>> You can safely ignore this; the GW2000 firmware includes an additional 
>>> field that was not identified in the Ecowitt Gateway API documentation on 
>>> which the v0.5.0b5 Ecwoitt Gateway driver is based. Consequently v0.5.0b5 
>>> ignores, but debug logs, the unknown field. Ecowitt has since documented 
>>> this unknown field as indicating whether or not radiation compensation is 
>>> applied when reporting outside temperature for WH65/WH69/WS80/WS90 devices.
>>>  
>>> Gary
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4d8ae555-a978-4cc0-a7f2-da8184b82188n%40googlegroups.com.

[weewx-user] Re: Weewx not picking up rain from ecowitt

[Peter Peter]

Hey again Garry. I am trying to work out if this is a weewx or weather34 
issue. I can see as mentioned above the rain (or what I believe is the rain 
figures) in the loop but when I went to my cwop page after I went home it 
shows no rain either and that gets fed from Weewx. The wunderground page 
that gets fed directly from the GW2000 shows the rain.

I am happy to post any logs etc if that helps or look at anything if you 
can point me in that direction.

On Wednesday, March 22, 2023 at 12:17:58 PM UTC+11 Peter Peter wrote:

> Thanks Gary. I was trying to beat you back here but alas I didnt. I did a 
> search on the gw2000 and found some posts and like you suggested here ran 
> Weewx directly and can see both the rain in the loop and rec so that parts 
> seems ok. I will do a bit more research and see what I can find. I have 
> been trying the Weather34 skin/web stuff and thats how I noticed it and 
> then went and looked at other stuff. It gives me something to tinker with
>
> On Wednesday, March 22, 2023 at 11:47:10 AM UTC+11 gjr80 wrote:
>
>> On Wednesday, 22 March 2023 at 10:05:31 UTC+10 sale...@gmail.com wrote:
>>
>> Hey all.
>>
>> I have been running Weewx together with my Ecowitt and using the GW1000 
>> setup. My base unit is actually a GW2000C_V2.2.3C
>>
>> When I initially set it up I ran it in simulator mode and all seemed ok
>>
>> I have been waiting for rain and we have some today but it appears Weewx 
>> isnt picking up the rain info. The last update of the rain data in relation 
>> the the graphics was over a week ago and thats when I changed from 
>> Simulator to real. At that stage I deleted the database and let it start.
>>
>>  
>> What sensor is connected to your GW2000 and reporting rain? I'm guessing 
>> it is a WS90? The GW2000 (and other Ecowitt gateway devices) simultaneously 
>> support traditional tipping type rain gauges (eg WH40) as well as piezo 
>> based WS90. A default install of the Ecowitt Gateway driver will map 
>> tipping rain gauge data through to WeeWX. If using a piezo based sensor (eg 
>> WS90) then the piezo rain data is passed through to WeeWX, but it must be 
>> manually mapped to suitable WeeWX fields. If you do indeed have a WS90 (and 
>> no other rain gauge) try adding a [[field_map_extensions]] stanza to 
>> [GW1000] in weewx.conf as follows:
>>
>> [GW1000]
>> 
>> [[field_map_extensions]]
>> rain = p_rain
>> stormRain = p_rainevent
>> rainRate = p_rainrate
>> dayRain = p_rainday
>> weekRain = p_rainweek
>> monthRain = p_rainmonth
>> yearRain = p_rainyear 
>>  
>> Stop WeeWX if it is running and try running WeeWX directly 
>> , you should see 
>> rainfall data appearing in the usual WeeWX rain fields. If you do indeed 
>> see rainfall data then stop WeeWX and restart it as a daemon.
>>
>> If you don't have a WS90 or have multiple rain gauges then some 
>> additional changes will be required. If this is the case, or the above does 
>> not work, post back here.
>>  
>>
>> The only thing I notice in the debug syslog entry that may be related is 
>> DEBUG user.gw1000: Unknown field address '7B' detected. Remaining data 
>> '00' ignored.
>>
>>  
>> You can safely ignore this; the GW2000 firmware includes an additional 
>> field that was not identified in the Ecowitt Gateway API documentation on 
>> which the v0.5.0b5 Ecwoitt Gateway driver is based. Consequently v0.5.0b5 
>> ignores, but debug logs, the unknown field. Ecowitt has since documented 
>> this unknown field as indicating whether or not radiation compensation is 
>> applied when reporting outside temperature for WH65/WH69/WS80/WS90 devices.
>>  
>> Gary
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/94dfe061-5c38-4e20-b930-b2564036c181n%40googlegroups.com.

[weewx-user] Re: Weewx not picking up rain from ecowitt

[Peter Peter]

Thanks Gary. I was trying to beat you back here but alas I didnt. I did a 
search on the gw2000 and found some posts and like you suggested here ran 
Weewx directly and can see both the rain in the loop and rec so that parts 
seems ok. I will do a bit more research and see what I can find. I have 
been trying the Weather34 skin/web stuff and thats how I noticed it and 
then went and looked at other stuff. It gives me something to tinker with

On Wednesday, March 22, 2023 at 11:47:10 AM UTC+11 gjr80 wrote:

> On Wednesday, 22 March 2023 at 10:05:31 UTC+10 sale...@gmail.com wrote:
>
> Hey all.
>
> I have been running Weewx together with my Ecowitt and using the GW1000 
> setup. My base unit is actually a GW2000C_V2.2.3C
>
> When I initially set it up I ran it in simulator mode and all seemed ok
>
> I have been waiting for rain and we have some today but it appears Weewx 
> isnt picking up the rain info. The last update of the rain data in relation 
> the the graphics was over a week ago and thats when I changed from 
> Simulator to real. At that stage I deleted the database and let it start.
>
>  
> What sensor is connected to your GW2000 and reporting rain? I'm guessing 
> it is a WS90? The GW2000 (and other Ecowitt gateway devices) simultaneously 
> support traditional tipping type rain gauges (eg WH40) as well as piezo 
> based WS90. A default install of the Ecowitt Gateway driver will map 
> tipping rain gauge data through to WeeWX. If using a piezo based sensor (eg 
> WS90) then the piezo rain data is passed through to WeeWX, but it must be 
> manually mapped to suitable WeeWX fields. If you do indeed have a WS90 (and 
> no other rain gauge) try adding a [[field_map_extensions]] stanza to 
> [GW1000] in weewx.conf as follows:
>
> [GW1000]
> 
> [[field_map_extensions]]
> rain = p_rain
> stormRain = p_rainevent
> rainRate = p_rainrate
> dayRain = p_rainday
> weekRain = p_rainweek
> monthRain = p_rainmonth
> yearRain = p_rainyear 
>  
> Stop WeeWX if it is running and try running WeeWX directly 
> , you should see 
> rainfall data appearing in the usual WeeWX rain fields. If you do indeed 
> see rainfall data then stop WeeWX and restart it as a daemon.
>
> If you don't have a WS90 or have multiple rain gauges then some additional 
> changes will be required. If this is the case, or the above does not work, 
> post back here.
>  
>
> The only thing I notice in the debug syslog entry that may be related is 
> DEBUG user.gw1000: Unknown field address '7B' detected. Remaining data 
> '00' ignored.
>
>  
> You can safely ignore this; the GW2000 firmware includes an additional 
> field that was not identified in the Ecowitt Gateway API documentation on 
> which the v0.5.0b5 Ecwoitt Gateway driver is based. Consequently v0.5.0b5 
> ignores, but debug logs, the unknown field. Ecowitt has since documented 
> this unknown field as indicating whether or not radiation compensation is 
> applied when reporting outside temperature for WH65/WH69/WS80/WS90 devices.
>  
> Gary
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/23385a05-3e9e-41cd-a6dd-34fd8012db78n%40googlegroups.com.

[weewx-user] Re: Weewx not picking up rain from ecowitt

[gjr80]

On Wednesday, 22 March 2023 at 10:05:31 UTC+10 sale...@gmail.com wrote:

Hey all.

I have been running Weewx together with my Ecowitt and using the GW1000 
setup. My base unit is actually a GW2000C_V2.2.3C

When I initially set it up I ran it in simulator mode and all seemed ok

I have been waiting for rain and we have some today but it appears Weewx 
isnt picking up the rain info. The last update of the rain data in relation 
the the graphics was over a week ago and thats when I changed from 
Simulator to real. At that stage I deleted the database and let it start.

 
What sensor is connected to your GW2000 and reporting rain? I'm guessing it 
is a WS90? The GW2000 (and other Ecowitt gateway devices) simultaneously 
support traditional tipping type rain gauges (eg WH40) as well as piezo 
based WS90. A default install of the Ecowitt Gateway driver will map 
tipping rain gauge data through to WeeWX. If using a piezo based sensor (eg 
WS90) then the piezo rain data is passed through to WeeWX, but it must be 
manually mapped to suitable WeeWX fields. If you do indeed have a WS90 (and 
no other rain gauge) try adding a [[field_map_extensions]] stanza to 
[GW1000] in weewx.conf as follows:

[GW1000]

[[field_map_extensions]]
rain = p_rain
stormRain = p_rainevent
rainRate = p_rainrate
dayRain = p_rainday
weekRain = p_rainweek
monthRain = p_rainmonth
yearRain = p_rainyear 
 
Stop WeeWX if it is running and try running WeeWX directly 
, you should see 
rainfall data appearing in the usual WeeWX rain fields. If you do indeed 
see rainfall data then stop WeeWX and restart it as a daemon.

If you don't have a WS90 or have multiple rain gauges then some additional 
changes will be required. If this is the case, or the above does not work, 
post back here.
 

The only thing I notice in the debug syslog entry that may be related is 
DEBUG user.gw1000: Unknown field address '7B' detected. Remaining data '00' 
ignored.

 
You can safely ignore this; the GW2000 firmware includes an additional 
field that was not identified in the Ecowitt Gateway API documentation on 
which the v0.5.0b5 Ecwoitt Gateway driver is based. Consequently v0.5.0b5 
ignores, but debug logs, the unknown field. Ecowitt has since documented 
this unknown field as indicating whether or not radiation compensation is 
applied when reporting outside temperature for WH65/WH69/WS80/WS90 devices.
 
Gary

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c77c9ce5-cad6-4b2e-a35e-2ac197afab8cn%40googlegroups.com.