[weewx-user] Re: weectl import csv KeyError: 'source_field'
I think you will find this is the source of the error in your first post: [[[inHumidity]]] source_field = inHumid unit = percent [[[windSpeed]]] source = windAvg unit = mile_per_hour [[[windDir]]] source_field = windDir unit = degree_compass Gary -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/376d3d39-bb8b-47fe-9245-fe66804a365bn%40googlegroups.com.
[weewx-user] Re: weectl import csv KeyError: 'source_field'
And I just realized what the issue was with the "Unknow units 'unix-epoch'". Changed units from 'unix-epoch' to 'unix_epoch' and now it seems to be working. My older "csv-import.conf" is now working with the weectl import. On Sunday, April 21, 2024 at 12:57:49 PM UTC-4 tarob...@gmail.com wrote: > Using my old import-csv.conf file (attached), I get the following error: > > sudo weectl import --import-config=/home/piToad/Documents/csv-import.conf > --dry-runUsing configuration file /etc/weewx/weewx.conf > > This is a dry run. Nothing will actually be done. > Starting weectl import... > Unknown units 'unix-epoch' specified for field 'dateTime' in > /home/piToad/Documents/csv-import.conf. > Nothing done, exiting. > > On Sunday, April 21, 2024 at 12:27:22 PM UTC-4 tarob...@gmail.com wrote: > >> Hello, >> >> I am trying to import some missing data via CSV file. I've done this >> numerous times pre weewx 5.0 and weectl (using wee_import). I've setup a >> new import config file using the new layout for [[FieldMap]]. I've attached >> the import config I used. However, during the --dry-run I am getting the >> below error. I've attached the config file. >> >> Column Headings: >> ['Timestamp','d5n1Temp', 'd5n1humid', 'd5n1Pres', 'rain5n1', >> 'windSpeed5n1', >>'windAvg', 'windDir', 'UV', 'luminosity', 'd5n1Humid', 'rain', >>'windSpeed', 'inTemp', 'inHumid', 'LiTemp', 'LiHumid', 'LiStrikes', >>'LiDistance', 'LiPres', 'GTemp', 'GHumid', 'radiation'] >> >> It's a source_field error but can't figure out which source_field is >> giving the error. I've looked them over but could be missing one. >> >> sudo weectl import >> --import-config=/home/piToad/Documents/csv-import-weectl.conf --dry-run >> Using configuration file /etc/weewx/weewx.conf >> This is a dry run. Nothing will actually be done. >> Starting weectl import... >> Traceback (most recent call last): >> File "/usr/share/weewx/weectl.py", line 74, in >> main() >> File "/usr/share/weewx/weectl.py", line 66, in main >> namespace.func(namespace) >> File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch >> namespace.action_func(config_dict, namespace) >> File "/usr/share/weewx/weectllib/import_cmd.py", line 82, in import_func >> weectllib.import_actions.obs_import(config_dict, >> File "/usr/share/weewx/weectllib/import_actions.py", line 54, in >> obs_import >> source_obj = >> weeimport.weeimport.Source.source_factory(config_dict['config_path'], >> >> ^ >> File "/usr/share/weewx/weeimport/weeimport.py", line 316, in >> source_factory >> return get_object(module_class)(config_path, >>^ >> File "/usr/share/weewx/weeimport/csvimport.py", line 110, in __init__ >> self.map = self.parse_map(_map, >> >> File "/usr/share/weewx/weeimport/weeimport.py", line 551, in parse_map >> _mapped_source_fields = [config['source_field'] for field, config in >> _map.items()] >> >> ^^ >> File "/usr/share/weewx/weeimport/weeimport.py", line 551, in >> _mapped_source_fields = [config['source_field'] for field, config in >> _map.items()] >> ~~ >> File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 554, >> in __getitem__ >> val = dict.__getitem__(self, key) >> ^^^ >> KeyError: 'source_field' >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/34977516-8d00-4cb9-80ea-5b6d3ee8d333n%40googlegroups.com.
[weewx-user] Re: weectl import csv KeyError: 'source_field'
Using my old import-csv.conf file (attached), I get the following error: sudo weectl import --import-config=/home/piToad/Documents/csv-import.conf --dry-runUsing configuration file /etc/weewx/weewx.conf This is a dry run. Nothing will actually be done. Starting weectl import... Unknown units 'unix-epoch' specified for field 'dateTime' in /home/piToad/Documents/csv-import.conf. Nothing done, exiting. On Sunday, April 21, 2024 at 12:27:22 PM UTC-4 tarob...@gmail.com wrote: > Hello, > > I am trying to import some missing data via CSV file. I've done this > numerous times pre weewx 5.0 and weectl (using wee_import). I've setup a > new import config file using the new layout for [[FieldMap]]. I've attached > the import config I used. However, during the --dry-run I am getting the > below error. I've attached the config file. > > Column Headings: > ['Timestamp','d5n1Temp', 'd5n1humid', 'd5n1Pres', 'rain5n1', > 'windSpeed5n1', >'windAvg', 'windDir', 'UV', 'luminosity', 'd5n1Humid', 'rain', >'windSpeed', 'inTemp', 'inHumid', 'LiTemp', 'LiHumid', 'LiStrikes', >'LiDistance', 'LiPres', 'GTemp', 'GHumid', 'radiation'] > > It's a source_field error but can't figure out which source_field is > giving the error. I've looked them over but could be missing one. > > sudo weectl import > --import-config=/home/piToad/Documents/csv-import-weectl.conf --dry-run > Using configuration file /etc/weewx/weewx.conf > This is a dry run. Nothing will actually be done. > Starting weectl import... > Traceback (most recent call last): > File "/usr/share/weewx/weectl.py", line 74, in > main() > File "/usr/share/weewx/weectl.py", line 66, in main > namespace.func(namespace) > File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch > namespace.action_func(config_dict, namespace) > File "/usr/share/weewx/weectllib/import_cmd.py", line 82, in import_func > weectllib.import_actions.obs_import(config_dict, > File "/usr/share/weewx/weectllib/import_actions.py", line 54, in > obs_import > source_obj = > weeimport.weeimport.Source.source_factory(config_dict['config_path'], > > ^ > File "/usr/share/weewx/weeimport/weeimport.py", line 316, in > source_factory > return get_object(module_class)(config_path, >^ > File "/usr/share/weewx/weeimport/csvimport.py", line 110, in __init__ > self.map = self.parse_map(_map, > > File "/usr/share/weewx/weeimport/weeimport.py", line 551, in parse_map > _mapped_source_fields = [config['source_field'] for field, config in > _map.items()] > > ^^ > File "/usr/share/weewx/weeimport/weeimport.py", line 551, in > _mapped_source_fields = [config['source_field'] for field, config in > _map.items()] > ~~ > File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 554, > in __getitem__ > val = dict.__getitem__(self, key) > ^^^ > KeyError: 'source_field' > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3ae8edb0-9438-423e-9342-1b6c95735f0an%40googlegroups.com. # EXAMPLE CONFIGURATION FILE FOR IMPORTING FROM CSV FILES # # Copyright (c) 2009-2019 Tom Keffer and Gary Roderick. # See the file LICENSE.txt for your rights. ## # Specify the source. Available options are: # CSV - import obs from a single CSV format file # WU - import obs from a Weather Underground PWS history # Cumulus - import obs from a one or more Cumulus monthly log files # WD - import obs from a one or more WD monthly log files # Format is: # source = (CSV | WU | Cumulus) source = CSV ## [CSV] # Parameters used when importing from a CSV file # Path and name of our CSV source file. Format is: # file = full path and filename file = /var/tmp/dataCorrection.csv # The character used to separate fields. Format is: # delimiter = # Default is , (comma). delimiter = ',' # If there is no mapped interval field how will the interval field be # determined for the imported records. Available options are: # derive - Derive the interval field from the timestamp of successive #records. This setting is best used when the imported records #are equally spaced in time and there are no missing records. # co