Re: [weewx-user] Weewx stopped working after power outage

[Bob DeMattia]

Sure enough, I visited the site today and found piezoelectric sounder in
the WM918 continuous on (normally it just beeps when you press buttons).
The screen was frozen.  After a power cycle it resumed normal operation.  I
also put a fresh set of batteries in it.

Thanks Tom for pointing me in the right direction.  I always thought there
was a timeout message in the log when the serial connection had failed.

-Bob


On Sat, Feb 4, 2023 at 8:17 PM Bob DeMattia  wrote:

> No loop packets.  I can visit the site on Monday morning.   This is an old
> WM918.  I'm guessing the 8 x AAA alkaline batteries didn't do well in the
> subzero temperatures - but still, the unit also has  AC power.  It probably
> just glitched when the power was interrupted, and the weak batteries didn't
> fill in the gap during the glitch.
>
> Thanks for your advice,
> Bob
>
>
> On Sat, Feb 4, 2023 at 5:48 PM Tom Keffer  wrote:
>
>> If you run weewxd directly from the command line
>> , do you see
>> any LOOP packets? If not, I'd suspect that the console is not emitting
>> anything.
>>
>> -tk
>>
>> On Sat, Feb 4, 2023 at 2:35 PM Bob DeMattia  wrote:
>>
>>> When I start it, there are the normal things that you see in the log.
>>> After that, there is nothing.
>>> I just grep'd for "weewx" in my system log file.  Below is everything
>>> since the restart at 11:25AM this morning.
>>>
>>> I should add that after this problem began, I completely uninstalled
>>> weewx and installed it again.  The reinstall did not help.
>>> With one change (changing station_type to "Simulator") it will report
>>> normally at the archive interval.
>>>
>>> Below the log is the result from a service status command.
>>>
>>> -Bob
>>>
>>>
>>> Feb  4 11:25:59 w1mra systemd: Starting SYSV: start and stop the weewx
>>> weather system...
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Initializing
>>> weewx version 4.10.1
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using Python
>>> 2.7.5 (default, Oct 30 2018, 23:45:53) #012[GCC 4.8.5 20150623 (Red Hat
>>> 4.8.5-36)]
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Located at
>>> /bin/python2
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Platform
>>> Linux-3.10.0-957.1.3.el7.x86_64-x86_64-with-centos-7.6.1810-Core
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Locale is
>>> 'en_US.UTF-8'
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using
>>> configuration file /etc/weewx/weewx.conf
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Debug is 1
>>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: PID file is
>>> /var/run/weewx.pid
>>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Loading
>>> station type WMR9x8 (weewx.drivers.wmr9x8)
>>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
>>> driver version is 3.4.1
>>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
>>> sensor map is {'yesterdayRain': 'rain_yesterday', 'extraTemp8':
>>> 'temperature_8', 'outHumidity': 'humidity_out', 'extraHumid1':
>>> 'humidity_1', 'inTempBatteryStatus': 'battery_status_in',
>>> 'rainBatteryStatus': 'battery_status_rain', 'extraTemp5': 'temperature_5',
>>> 'extraTemp2': 'temperature_2', 'outTempBatteryStatus':
>>> 'battery_status_out', 'inDewpoint': 'dewpoint_in', 'hourRain': 'rain_hour',
>>> 'inTemp': 'temperature_in', 'barometer': 'barometer', 'windchill':
>>> 'windchill', 'dewpoint': 'dewpoint_out', 'extraTemp7': 'temperature_7',
>>> 'rain': 'rain', 'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7',
>>> 'extraHumid4': 'humidity_4', 'extraHumid5': 'humidity_5', 'extraHumid2':
>>> 'humidity_2', 'extraHumid3': 'humidity_3', 'dewpoint5': 'dewpoint_5',
>>> 'dewpoint4': 'dewpoint_4', 'extraTemp6': 'temperature_6', 'rainTotal':
>>> 'rain_total', 'extraTemp4': 'temperature_4', 'dewpoint8': 'dewpoint_8',
>>> 'rainRate': 'rain_rate', 'extraTemp3': 'temperature_3', 'extraHumid8':
>>> 'humidity_8', 'extraTemp1': 'temperature_1', 'dewpoint1': 'dewpoint_1',
>>> 'dewpoint3': 'dewpoint_3', 'extraBatteryStatus8': 'battery_status_8',
>>> 'dewpoint2': 'dewpoint_2', 'extraBatteryStatus2': 'battery_status_2',
>>> 'extraBatteryStatus3': 'battery_status_3', 'windBatteryStatus':
>>> 'battery_status_wind', 'extraBatteryStatus1': 'battery_status_1',
>>> 'extraBatteryStatus6': 'battery_status_6', 'extraBatteryStatus7':
>>> 'battery_status_7', 'extraBatteryStatus4': 'battery_status_4',
>>> 'extraBatteryStatus5': 'battery_status_5', 'windDir': 'wind_dir',
>>> 'outTemp': 'temperature_out', 'windSpeed': 'wind_speed', 'dewpoint0':
>>> 'dewpoint_0', 'inHumidity': 'humidity_in', 'rain24': 'rain_24', 'windGust':
>>> 'wind_gust', 'dewpoint7': 'dewpoint_7', 'pressure': 'pressure',
>>> 'windGustDir': 'wind_gust_dir', 'dewpoint6': 'dewpoint_6'}
>>> Feb  4 11:25:59 w1mra weewx: Starting weewx: [  OK  ]
>>> Feb  4 11:25:59 w1mra system

Re: [weewx-user] Weewx stopped working after power outage

[Bob DeMattia]

No loop packets.  I can visit the site on Monday morning.   This is an old
WM918.  I'm guessing the 8 x AAA alkaline batteries didn't do well in the
subzero temperatures - but still, the unit also has  AC power.  It probably
just glitched when the power was interrupted, and the weak batteries didn't
fill in the gap during the glitch.

Thanks for your advice,
Bob


On Sat, Feb 4, 2023 at 5:48 PM Tom Keffer  wrote:

> If you run weewxd directly from the command line
> , do you see
> any LOOP packets? If not, I'd suspect that the console is not emitting
> anything.
>
> -tk
>
> On Sat, Feb 4, 2023 at 2:35 PM Bob DeMattia  wrote:
>
>> When I start it, there are the normal things that you see in the log.
>> After that, there is nothing.
>> I just grep'd for "weewx" in my system log file.  Below is everything
>> since the restart at 11:25AM this morning.
>>
>> I should add that after this problem began, I completely uninstalled
>> weewx and installed it again.  The reinstall did not help.
>> With one change (changing station_type to "Simulator") it will report
>> normally at the archive interval.
>>
>> Below the log is the result from a service status command.
>>
>> -Bob
>>
>>
>> Feb  4 11:25:59 w1mra systemd: Starting SYSV: start and stop the weewx
>> weather system...
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Initializing
>> weewx version 4.10.1
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using Python
>> 2.7.5 (default, Oct 30 2018, 23:45:53) #012[GCC 4.8.5 20150623 (Red Hat
>> 4.8.5-36)]
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Located at
>> /bin/python2
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Platform
>> Linux-3.10.0-957.1.3.el7.x86_64-x86_64-with-centos-7.6.1810-Core
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Locale is
>> 'en_US.UTF-8'
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using
>> configuration file /etc/weewx/weewx.conf
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Debug is 1
>> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: PID file is
>> /var/run/weewx.pid
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Loading
>> station type WMR9x8 (weewx.drivers.wmr9x8)
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
>> driver version is 3.4.1
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
>> sensor map is {'yesterdayRain': 'rain_yesterday', 'extraTemp8':
>> 'temperature_8', 'outHumidity': 'humidity_out', 'extraHumid1':
>> 'humidity_1', 'inTempBatteryStatus': 'battery_status_in',
>> 'rainBatteryStatus': 'battery_status_rain', 'extraTemp5': 'temperature_5',
>> 'extraTemp2': 'temperature_2', 'outTempBatteryStatus':
>> 'battery_status_out', 'inDewpoint': 'dewpoint_in', 'hourRain': 'rain_hour',
>> 'inTemp': 'temperature_in', 'barometer': 'barometer', 'windchill':
>> 'windchill', 'dewpoint': 'dewpoint_out', 'extraTemp7': 'temperature_7',
>> 'rain': 'rain', 'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7',
>> 'extraHumid4': 'humidity_4', 'extraHumid5': 'humidity_5', 'extraHumid2':
>> 'humidity_2', 'extraHumid3': 'humidity_3', 'dewpoint5': 'dewpoint_5',
>> 'dewpoint4': 'dewpoint_4', 'extraTemp6': 'temperature_6', 'rainTotal':
>> 'rain_total', 'extraTemp4': 'temperature_4', 'dewpoint8': 'dewpoint_8',
>> 'rainRate': 'rain_rate', 'extraTemp3': 'temperature_3', 'extraHumid8':
>> 'humidity_8', 'extraTemp1': 'temperature_1', 'dewpoint1': 'dewpoint_1',
>> 'dewpoint3': 'dewpoint_3', 'extraBatteryStatus8': 'battery_status_8',
>> 'dewpoint2': 'dewpoint_2', 'extraBatteryStatus2': 'battery_status_2',
>> 'extraBatteryStatus3': 'battery_status_3', 'windBatteryStatus':
>> 'battery_status_wind', 'extraBatteryStatus1': 'battery_status_1',
>> 'extraBatteryStatus6': 'battery_status_6', 'extraBatteryStatus7':
>> 'battery_status_7', 'extraBatteryStatus4': 'battery_status_4',
>> 'extraBatteryStatus5': 'battery_status_5', 'windDir': 'wind_dir',
>> 'outTemp': 'temperature_out', 'windSpeed': 'wind_speed', 'dewpoint0':
>> 'dewpoint_0', 'inHumidity': 'humidity_in', 'rain24': 'rain_24', 'windGust':
>> 'wind_gust', 'dewpoint7': 'dewpoint_7', 'pressure': 'pressure',
>> 'windGustDir': 'wind_gust_dir', 'dewpoint6': 'dewpoint_6'}
>> Feb  4 11:25:59 w1mra weewx: Starting weewx: [  OK  ]
>> Feb  4 11:25:59 w1mra systemd: Started SYSV: start and stop the weewx
>> weather system.
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: StdConvert
>> target unit is 0x1
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.wxservices:
>> StdWXCalculate will use data binding wx_binding
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Archive
>> will use data binding wx_binding
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Record
>> generation will be attempted in 'hardware'
>> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx

Re: [weewx-user] Weewx stopped working after power outage

[Tom Keffer]

If you run weewxd directly from the command line
, do you see any
LOOP packets? If not, I'd suspect that the console is not emitting anything.

-tk

On Sat, Feb 4, 2023 at 2:35 PM Bob DeMattia  wrote:

> When I start it, there are the normal things that you see in the log.
> After that, there is nothing.
> I just grep'd for "weewx" in my system log file.  Below is everything
> since the restart at 11:25AM this morning.
>
> I should add that after this problem began, I completely uninstalled weewx
> and installed it again.  The reinstall did not help.
> With one change (changing station_type to "Simulator") it will report
> normally at the archive interval.
>
> Below the log is the result from a service status command.
>
> -Bob
>
>
> Feb  4 11:25:59 w1mra systemd: Starting SYSV: start and stop the weewx
> weather system...
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Initializing
> weewx version 4.10.1
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using Python
> 2.7.5 (default, Oct 30 2018, 23:45:53) #012[GCC 4.8.5 20150623 (Red Hat
> 4.8.5-36)]
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Located at
> /bin/python2
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Platform
> Linux-3.10.0-957.1.3.el7.x86_64-x86_64-with-centos-7.6.1810-Core
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Locale is
> 'en_US.UTF-8'
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using
> configuration file /etc/weewx/weewx.conf
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Debug is 1
> Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: PID file is
> /var/run/weewx.pid
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Loading
> station type WMR9x8 (weewx.drivers.wmr9x8)
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
> driver version is 3.4.1
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
> sensor map is {'yesterdayRain': 'rain_yesterday', 'extraTemp8':
> 'temperature_8', 'outHumidity': 'humidity_out', 'extraHumid1':
> 'humidity_1', 'inTempBatteryStatus': 'battery_status_in',
> 'rainBatteryStatus': 'battery_status_rain', 'extraTemp5': 'temperature_5',
> 'extraTemp2': 'temperature_2', 'outTempBatteryStatus':
> 'battery_status_out', 'inDewpoint': 'dewpoint_in', 'hourRain': 'rain_hour',
> 'inTemp': 'temperature_in', 'barometer': 'barometer', 'windchill':
> 'windchill', 'dewpoint': 'dewpoint_out', 'extraTemp7': 'temperature_7',
> 'rain': 'rain', 'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7',
> 'extraHumid4': 'humidity_4', 'extraHumid5': 'humidity_5', 'extraHumid2':
> 'humidity_2', 'extraHumid3': 'humidity_3', 'dewpoint5': 'dewpoint_5',
> 'dewpoint4': 'dewpoint_4', 'extraTemp6': 'temperature_6', 'rainTotal':
> 'rain_total', 'extraTemp4': 'temperature_4', 'dewpoint8': 'dewpoint_8',
> 'rainRate': 'rain_rate', 'extraTemp3': 'temperature_3', 'extraHumid8':
> 'humidity_8', 'extraTemp1': 'temperature_1', 'dewpoint1': 'dewpoint_1',
> 'dewpoint3': 'dewpoint_3', 'extraBatteryStatus8': 'battery_status_8',
> 'dewpoint2': 'dewpoint_2', 'extraBatteryStatus2': 'battery_status_2',
> 'extraBatteryStatus3': 'battery_status_3', 'windBatteryStatus':
> 'battery_status_wind', 'extraBatteryStatus1': 'battery_status_1',
> 'extraBatteryStatus6': 'battery_status_6', 'extraBatteryStatus7':
> 'battery_status_7', 'extraBatteryStatus4': 'battery_status_4',
> 'extraBatteryStatus5': 'battery_status_5', 'windDir': 'wind_dir',
> 'outTemp': 'temperature_out', 'windSpeed': 'wind_speed', 'dewpoint0':
> 'dewpoint_0', 'inHumidity': 'humidity_in', 'rain24': 'rain_24', 'windGust':
> 'wind_gust', 'dewpoint7': 'dewpoint_7', 'pressure': 'pressure',
> 'windGustDir': 'wind_gust_dir', 'dewpoint6': 'dewpoint_6'}
> Feb  4 11:25:59 w1mra weewx: Starting weewx: [  OK  ]
> Feb  4 11:25:59 w1mra systemd: Started SYSV: start and stop the weewx
> weather system.
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: StdConvert
> target unit is 0x1
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.wxservices:
> StdWXCalculate will use data binding wx_binding
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Archive
> will use data binding wx_binding
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Record
> generation will be attempted in 'hardware'
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Using
> archive interval of 120 seconds (specified in weewx configuration)
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx:
> StationRegistry: Station will be registered.
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx:
> Wunderground: Posting not enabled.
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: PWSweather:
> Posting not enabled.
> Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: CWOP:
> Posting not enabled.
> Feb  4 11:25:59 w1m

Re: [weewx-user] Weewx stopped working after power outage

[Bob DeMattia]

When I start it, there are the normal things that you see in the log.
After that, there is nothing.
I just grep'd for "weewx" in my system log file.  Below is everything since
the restart at 11:25AM this morning.

I should add that after this problem began, I completely uninstalled weewx
and installed it again.  The reinstall did not help.
With one change (changing station_type to "Simulator") it will report
normally at the archive interval.

Below the log is the result from a service status command.

-Bob


Feb  4 11:25:59 w1mra systemd: Starting SYSV: start and stop the weewx
weather system...
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Initializing
weewx version 4.10.1
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using Python
2.7.5 (default, Oct 30 2018, 23:45:53) #012[GCC 4.8.5 20150623 (Red Hat
4.8.5-36)]
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Located at
/bin/python2
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Platform
Linux-3.10.0-957.1.3.el7.x86_64-x86_64-with-centos-7.6.1810-Core
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Locale is
'en_US.UTF-8'
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Using
configuration file /etc/weewx/weewx.conf
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: Debug is 1
Feb  4 11:25:59 w1mra journal: weewx[16809] INFO __main__: PID file is
/var/run/weewx.pid
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Loading
station type WMR9x8 (weewx.drivers.wmr9x8)
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
driver version is 3.4.1
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.drivers.wmr9x8:
sensor map is {'yesterdayRain': 'rain_yesterday', 'extraTemp8':
'temperature_8', 'outHumidity': 'humidity_out', 'extraHumid1':
'humidity_1', 'inTempBatteryStatus': 'battery_status_in',
'rainBatteryStatus': 'battery_status_rain', 'extraTemp5': 'temperature_5',
'extraTemp2': 'temperature_2', 'outTempBatteryStatus':
'battery_status_out', 'inDewpoint': 'dewpoint_in', 'hourRain': 'rain_hour',
'inTemp': 'temperature_in', 'barometer': 'barometer', 'windchill':
'windchill', 'dewpoint': 'dewpoint_out', 'extraTemp7': 'temperature_7',
'rain': 'rain', 'extraHumid6': 'humidity_6', 'extraHumid7': 'humidity_7',
'extraHumid4': 'humidity_4', 'extraHumid5': 'humidity_5', 'extraHumid2':
'humidity_2', 'extraHumid3': 'humidity_3', 'dewpoint5': 'dewpoint_5',
'dewpoint4': 'dewpoint_4', 'extraTemp6': 'temperature_6', 'rainTotal':
'rain_total', 'extraTemp4': 'temperature_4', 'dewpoint8': 'dewpoint_8',
'rainRate': 'rain_rate', 'extraTemp3': 'temperature_3', 'extraHumid8':
'humidity_8', 'extraTemp1': 'temperature_1', 'dewpoint1': 'dewpoint_1',
'dewpoint3': 'dewpoint_3', 'extraBatteryStatus8': 'battery_status_8',
'dewpoint2': 'dewpoint_2', 'extraBatteryStatus2': 'battery_status_2',
'extraBatteryStatus3': 'battery_status_3', 'windBatteryStatus':
'battery_status_wind', 'extraBatteryStatus1': 'battery_status_1',
'extraBatteryStatus6': 'battery_status_6', 'extraBatteryStatus7':
'battery_status_7', 'extraBatteryStatus4': 'battery_status_4',
'extraBatteryStatus5': 'battery_status_5', 'windDir': 'wind_dir',
'outTemp': 'temperature_out', 'windSpeed': 'wind_speed', 'dewpoint0':
'dewpoint_0', 'inHumidity': 'humidity_in', 'rain24': 'rain_24', 'windGust':
'wind_gust', 'dewpoint7': 'dewpoint_7', 'pressure': 'pressure',
'windGustDir': 'wind_gust_dir', 'dewpoint6': 'dewpoint_6'}
Feb  4 11:25:59 w1mra weewx: Starting weewx: [  OK  ]
Feb  4 11:25:59 w1mra systemd: Started SYSV: start and stop the weewx
weather system.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: StdConvert
target unit is 0x1
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.wxservices:
StdWXCalculate will use data binding wx_binding
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Archive will
use data binding wx_binding
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Record
generation will be attempted in 'hardware'
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: Using
archive interval of 120 seconds (specified in weewx configuration)
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx:
StationRegistry: Station will be registered.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: Wunderground:
Posting not enabled.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: PWSweather:
Posting not enabled.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: CWOP: Posting
not enabled.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: WOW: Posting
not enabled.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.restx: AWEKAS:
Posting not enabled.
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO weewx.engine: 'pyephem'
not detected, extended almanac data is not available
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO __main__: Starting up
weewx version 4.10.1
Feb  4 11:25:59 w1mra journal: weewx[16813] INFO w

Re: [weewx-user] Weewx stopped working after power outage

[Tom Keffer]

Is there literally no log entries? Or, are there no entries indicating an
error? If the latter, post them anyway --- there's almost always some
clues. Restart weewx, post the log through the first reporting cycle.

If there is literally nothing in the log, you're going to have to fix that
first. It's nearly impossible to debug without it.

-tk


On Sat, Feb 4, 2023 at 8:42 AM K1IW  wrote:

> We had a brief power interruption yesterday, after which there were no
> more updates to our weewx web pages.
>
> There are no entries in the system log at all, but the weewx process is
> running.
>
> I found that if I replace my station type in weewx.conf with "Simulator",
> then I see the normal activity in the system log and the pages update.
> But, when I switch it back to our hardware (WMR9x8), again there is nothing
> in the system log - even with debug=1.
>
> The equipment is located at a remote site, so I don't have immediate
> access to it.  I would think if the hardware was down and thus the serial
> interface wasn't working that I would at least see messages about the
> connection timing out, but I see nothing.
>
> Does anyone have any suggestions?
>
> Thanks,
> Bob
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/0ec9cb20-4aed-453f-a549-1238b1dd0055n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zEDWOdkQ-pNoYJMi36tQP3OsCbYP132m-MZGazfHee%2BRgQ%40mail.gmail.com.

[weewx-user] Weewx stopped working after power outage

[K1IW]

We had a brief power interruption yesterday, after which there were no more 
updates to our weewx web pages.

There are no entries in the system log at all, but the weewx process is 
running.

I found that if I replace my station type in weewx.conf with "Simulator", 
then I see the normal activity in the system log and the pages update.  
But, when I switch it back to our hardware (WMR9x8), again there is nothing 
in the system log - even with debug=1.

The equipment is located at a remote site, so I don't have immediate access 
to it.  I would think if the hardware was down and thus the serial 
interface wasn't working that I would at least see messages about the 
connection timing out, but I see nothing.

Does anyone have any suggestions?

Thanks,
Bob

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/0ec9cb20-4aed-453f-a549-1238b1dd0055n%40googlegroups.com.

Re: [weewx-user] weewx stopped working

[p q]

Is there more to this log? I don't see a problem.

On Fri, Nov 19, 2021 at 4:11 PM Jim W.  wrote:

> I recently moved and my had a bit of difficulty with my new ISP Provider.
> (is that redundant?) Anyway after updating my operating system weewx
> stopped working. I'm hoping someone can have a quick look at my log and see
> what's going on.
>
>
> I'm running weewx (version 3.9.2) on a RPi B+ using a Davis Vantage VUE
>
>
> Nov 19 10:55:15 TESTBED weewx[569]: vantage: Getting archive packets since
> 2021-11-02 19:05:00 PDT (1635905100)
>
> Nov 19 10:55:15 TESTBED weewx[569]: vantage: Gentle wake up of console
> successful
>
> Nov 19 10:55:17 TESTBED weewx[569]: vantage: Retrieving 513 page(s);
> starting index= 3
>
> Nov 19 10:55:17 TESTBED weewx[569]: vantage: DMPAFT complete: page
> timestamp 2021-05-24 06:40:00 PDT (1621863600) less than final timestamp
> 2021-11-02 19:05:00 PDT (1635905100)
>
> Nov 19 10:55:17 TESTBED weewx[569]: vantage: Catch up complete.
>
> Nov 19 10:55:17 TESTBED weewx[569]: reportengine: Running reports for
> latest time in the database.
>
> Nov 19 10:55:17 TESTBED weewx[569]: reportengine: Running report
> 'SeasonsReport'
>
> Nov 19 10:55:17 TESTBED weewx[569]: vantage: Requesting 200 LOOP packets.
>
> Nov 19 10:55:17 TESTBED weewx[569]: reportengine: Found configuration file
> /etc/weewx/skins/Seasons/skin.conf for report 'SeasonsReport'
>
> Nov 19 10:55:17 TESTBED weewx[569]: vantage: Gentle wake up of console
> successful
>
> Nov 19 10:55:17 TESTBED weewx[569]: cheetahgenerator: using search list
> ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station',
> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats',
> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras']
>
> Nov 19 10:55:17 TESTBED weewx[569]: manager: Daily summary version is 2.0
>
> Nov 19 10:55:19 TESTBED weewx[569]: cheetahgenerator: Generated 9 files
> for report SeasonsReport in 1.83 seconds
>
> Nov 19 10:55:19 TESTBED weewx[569]: manager: Daily summary version is 2.0
>
> Nov 19 10:55:20 TESTBED weewx[569]: imagegenerator: Generated 14 images
> for SeasonsReport in 1.05 seconds
>
> Nov 19 10:55:20 TESTBED weewx[569]: copygenerator: copied 0 files to
> /var/www/html/weewx
>
> Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report
> 'SmartphoneReport' not enabled. Skipping.
>
> Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'MobileReport'
> not enabled. Skipping.
>
> Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'StandardReport'
> not enabled. Skipping.
>
> Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'FTP' not
> enabled. Skipping.
>
> Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'RSYNC' not
> enabled. Skipping.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/a3e28dab-d9e0-42f0-b81c-9fe51812d551n%40googlegroups.com
> 
> .
>


-- 
Peter Quinn
(415)794-2264

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAA1SM22rJDUnyTzjvydAghgTKvWgcznKrm2UL1YZVAyU4_RTwA%40mail.gmail.com.

[weewx-user] weewx stopped working

[Jim W.]

 

I recently moved and my had a bit of difficulty with my new ISP Provider. 
(is that redundant?) Anyway after updating my operating system weewx 
stopped working. I'm hoping someone can have a quick look at my log and see 
what's going on.


I'm running weewx (version 3.9.2) on a RPi B+ using a Davis Vantage VUE


Nov 19 10:55:15 TESTBED weewx[569]: vantage: Getting archive packets since 
2021-11-02 19:05:00 PDT (1635905100)

Nov 19 10:55:15 TESTBED weewx[569]: vantage: Gentle wake up of console 
successful

Nov 19 10:55:17 TESTBED weewx[569]: vantage: Retrieving 513 page(s); 
starting index= 3

Nov 19 10:55:17 TESTBED weewx[569]: vantage: DMPAFT complete: page 
timestamp 2021-05-24 06:40:00 PDT (1621863600) less than final timestamp 
2021-11-02 19:05:00 PDT (1635905100)

Nov 19 10:55:17 TESTBED weewx[569]: vantage: Catch up complete.

Nov 19 10:55:17 TESTBED weewx[569]: reportengine: Running reports for 
latest time in the database.

Nov 19 10:55:17 TESTBED weewx[569]: reportengine: Running report 
'SeasonsReport'

Nov 19 10:55:17 TESTBED weewx[569]: vantage: Requesting 200 LOOP packets.

Nov 19 10:55:17 TESTBED weewx[569]: reportengine: Found configuration file 
/etc/weewx/skins/Seasons/skin.conf for report 'SeasonsReport'

Nov 19 10:55:17 TESTBED weewx[569]: vantage: Gentle wake up of console 
successful

Nov 19 10:55:17 TESTBED weewx[569]: cheetahgenerator: using search list 
['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 
'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 
'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras']

Nov 19 10:55:17 TESTBED weewx[569]: manager: Daily summary version is 2.0

Nov 19 10:55:19 TESTBED weewx[569]: cheetahgenerator: Generated 9 files for 
report SeasonsReport in 1.83 seconds

Nov 19 10:55:19 TESTBED weewx[569]: manager: Daily summary version is 2.0

Nov 19 10:55:20 TESTBED weewx[569]: imagegenerator: Generated 14 images for 
SeasonsReport in 1.05 seconds

Nov 19 10:55:20 TESTBED weewx[569]: copygenerator: copied 0 files to 
/var/www/html/weewx

Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'SmartphoneReport' 
not enabled. Skipping.

Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'MobileReport' not 
enabled. Skipping.

Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'StandardReport' 
not enabled. Skipping.

Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'FTP' not enabled. 
Skipping.

Nov 19 10:55:20 TESTBED weewx[569]: reportengine: Report 'RSYNC' not 
enabled. Skipping.


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a3e28dab-d9e0-42f0-b81c-9fe51812d551n%40googlegroups.com.

[weewx-user] weewx stopped working after restart

[miso k]

Hello, 
after restart, my weewx 4.4 on RPi3 stopped working. this is the log with 
debug = 1

Mar  3 20:58:05 WeeWX systemd[1]: Starting LSB: weewx weather system...
Mar  3 20:58:06 WeeWX weewx[1306] INFO __main__: Initializing weewx version 
4.4.0
Mar  3 20:58:06 WeeWX weewx[1306] INFO __main__: Using Python 3.7.3 
(default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]
Mar  3 20:58:06 WeeWX weewx[1306] INFO __main__: Platform 
Linux-5.10.11-v7+-armv7l-with-debian-10.8
Mar  3 20:58:06 WeeWX weewx[1306] INFO __main__: Locale is 'sk_SK.UTF-8'
Mar  3 20:58:06 WeeWX weewx[1306] INFO __main__: PID file is 
/var/run/weewx.pid
Mar  3 20:58:06 WeeWX weewx[1310] INFO __main__: Using configuration file 
/etc/weewx/weewx.conf
Mar  3 20:58:06 WeeWX weewx[1310] INFO __main__: Debug is 1
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG __main__: Initializing engine
Mar  3 20:58:06 WeeWX weewx[1310] INFO weewx.engine: Loading station type 
Interceptor (user.interceptor)
Mar  3 20:58:06 WeeWX weewx[1294]: Starting weewx weather system: weewx.
Mar  3 20:58:06 WeeWX systemd[1]: Started LSB: weewx weather system.
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.interceptor: driver version is 
0.53
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.interceptor: device type: 
observer
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.interceptor: mode is listen
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.interceptor: listen on :8085
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.interceptor: sensor map: 
{'pressure': 'pressure', 'barometer': 'barometer', 'outHumidity': 
'humidity_out', 'inHumidity': 'humidity_in', 'outTemp': 'temperature_out', 
'inTemp': 'temperature_in', 'windSpeed': 'wind_speed', 'windGust': 
'wind_gust', 'windDir': 'wind_dir', 'windGustDir': 'wind_gust_dir', 
'radiation': 'solar_radiation', 'dewpoint': 'dewpoint', 'windchill': 
'windchill', 'rain': 'rain', 'rainRate': 'rain_rate', 'UV': 'uv', 
'txBatteryStatus': 'battery', 'extraTemp1': 'temperature_1', 'extraTemp2': 
'temperature_2', 'extraTemp3': 'temperature_3', 'extraHumid1': 
'humidity_1', 'extraHumid2': 'humidity_2', 'soilTemp1': 
'soil_temperature_1', 'soilTemp2': 'soil_temperature_2', 'soilMoist1': 
'soil_moisture_1', 'soilMoist2': 'soil_moisture_2', 'soilMoist3': 
'soil_moisture_3', 'soilMoist4': 'soil_moisture_4', 'leafWet1': 
'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5', 
'extraTemp4': 'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6': 
'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp8': 
'temperature_8', 'extraHumid3': 'humidity_3', 'extraHumid4': 'humidity_4', 
'extraHumid5': 'humidity_5', 'extraHumid6': 'humidity_6', 'extraHumid7': 
'humidity_7', 'extraHumid8': 'humidity_8', 'soilTemp3': 
'soil_temperature_3', 'soilTemp4': 'soil_temperature_4'}
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.interceptor: start tcp server
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG weewx.engine: Loading service 
weewx.engine.StdTimeSynch
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG weewx.engine: Finished loading 
service weewx.engine.StdTimeSynch
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG weewx.engine: Loading service 
user.filepile.FilePile
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.filepile: Using 
/var/www/html/weewx/sds011pmdata.txt with the 'METRICWX' unit system
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.filepile: Label map is 
{'SDS_P1': 'pm10_0', 'SDS_P2': 'pm2_5', 'BME280_temperature': 'extraTemp1', 
'BME280_humidity': 'extraHumid1', 'signal': 'signal1'}
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG weewx.engine: Finished loading 
service user.filepile.FilePile
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG weewx.engine: Loading service 
user.MQTTSubscribe.MQTTSubscribeService
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.MQTTSubscribe: (Service) Using 
weewx version 4.4.0
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.MQTTSubscribe: (Service) Using 
Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.MQTTSubscribe: (Service) 
Platform Linux-5.10.11-v7+-armv7l-with-debian-10.8
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.MQTTSubscribe: (Service) 
Locale is 'sk_SK.UTF-8'
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.MQTTSubscribe: (Service) 
Version is 2.0.0-rc03
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.MQTTSubscribe: (Service) Log 
level: 0
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.MQTTSubscribe: (Service) Log 
debug setting: 1
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.MQTTSubscribe: (Service) Log 
console: False
Mar  3 20:58:06 WeeWX weewx[1310] INFO user.MQTTSubscribe: (Service) Log 
file: None
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.MQTTSubscribe: (Service) 
sanitized configuration removed ['password']
Mar  3 20:58:06 WeeWX weewx[1310] DEBUG user.MQTTSubscribe: (Service) 
MQTTSUBscriber sanitized_service_dict is {'port': '1883', 'binding': 
'loop', 'host': 'localhost', 'message_callback': {'type': 'json'}, 
'keepalive': '60', 'topics': {'unit_system': 'METRICWX', 
'weather/lightning/SENSOR': {'Time': {'ignore':

[weewx-user] WeeWX stopped working after upgrade 4.3.0 to 4.4.0

[miso k]

Hello,

again the same problem during upgrade - weewx stopped working after sudo 
apt-get install weewx

this is how the install finished:
Configuration file '/etc/weewx/skins/Seasons/skin.conf'
 ==> Modified (by you or by a script) since installation.
 ==> Package distributor has shipped an updated version.
   What would you like to do about it ?  Your options are:
Y or I  : install the package maintainer's version
N or O  : keep your currently-installed version
  D : show the differences between the versions
  Z : start a shell to examine the situation
 The default action is to keep your current version.
*** skin.conf (Y/I/N/O/D/Z) [default=N] ? N
Installing new version of config file /etc/weewx/skins/Standard/skin.conf 
...

Configuration file '/etc/weewx/weewx.conf'
 ==> Modified (by you or by a script) since installation.
 ==> Package distributor has shipped an updated version.
   What would you like to do about it ?  Your options are:
Y or I  : install the package maintainer's version
N or O  : keep your currently-installed version
  D : show the differences between the versions
  Z : start a shell to examine the situation
 The default action is to keep your current version.
*** weewx.conf (Y/I/N/O/D/Z) [default=N] ? N
Installing new version of config file /etc/weewx/weewx.conf.dist ...
saving previous config file as /etc/weewx/weewx.conf-4.3.0
saving distribution config file as /etc/weewx/weewx.conf-4.4.0
merging previous and distribution into /etc/weewx/weewx.conf
Using configuration file /etc/weewx/weewx.conf-4.3.0
Processing triggers for systemd (241-7~deb10u5+rpi1) ...

I have restarted weewx, it does not work, so I made *sudo cp 
weewx.conf-4.3.0 weewx.conf*

again, does not work:
Feb  9 17:15:28 WeeWX systemd[1]: Started LSB: weewx weather system.
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.interceptor: driver version is 
0.53
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.interceptor: device type: 
observer
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.interceptor: mode is listen
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.interceptor: listen on :8085
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.interceptor: sensor map: 
{'pressure': 'pressure', 'barometer': 'barometer', 'outHumidity': 
'humidity_out', 'inHumidity': 'humidity_in', 'outTemp': 'temperature_out', 
'inTemp': 'temperature_in', 'windSpeed': 'wind_speed', 'windGust': 
'wind_gust', 'windDir': 'wind_dir', 'windGustDir': 'wind_gust_dir', 
'radiation': 'solar_radiation', 'dewpoint': 'dewpoint', 'windchill': 
'windchill', 'rain': 'rain', 'rainRate': 'rain_rate', 'UV': 'uv', 
'txBatteryStatus': 'battery', 'extraTemp1': 'temperature_1', 'extraTemp2': 
'temperature_2', 'extraTemp3': 'temperature_3', 'extraHumid1': 
'humidity_1', 'extraHumid2': 'humidity_2', 'soilTemp1': 
'soil_temperature_1', 'soilTemp2': 'soil_temperature_2', 'soilMoist1': 
'soil_moisture_1', 'soilMoist2': 'soil_moisture_2', 'soilMoist3': 
'soil_moisture_3', 'soilMoist4': 'soil_moisture_4', 'leafWet1': 
'leafwetness_1', 'leafWet2': 'leafwetness_2', 'pm2_5': 'pm2_5', 
'extraTemp4': 'temperature_4', 'extraTemp5': 'temperature_5', 'extraTemp6': 
'temperature_6', 'extraTemp7': 'temperature_7', 'extraTemp8': 
'temperature_8', 'extraHumid3': 'humidity_3', 'extraHumid4': 'humidity_4', 
'extraHumid5': 'humidity_5', 'extraHumid6': 'humidity_6', 'extraHumid7': 
'humidity_7', 'extraHumid8': 'humidity_8', 'soilTemp3': 
'soil_temperature_3', 'soilTemp4': 'soil_temperature_4'}
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG user.interceptor: start tcp server
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG weewx.engine: Loading service 
weewx.engine.StdTimeSynch
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG weewx.engine: Finished loading 
service weewx.engine.StdTimeSynch
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG weewx.engine: Loading service 
user.filepile.FilePile
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.filepile: Using 
/var/www/html/weewx/sds011pmdata.txt with the 'METRICWX' unit system
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.filepile: Label map is 
{'SDS_P1': 'pm10_0', 'SDS_P2': 'pm2_5', 'BME280_temperature': 'extraTemp1', 
'BME280_humidity': 'extraHumid1', 'signal': 'signal1'}
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG weewx.engine: Finished loading 
service user.filepile.FilePile
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG weewx.engine: Loading service 
user.MQTTSubscribe.MQTTSubscribeService
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG user.MQTTSubscribe: (Service) Using 
weewx version 4.4.0
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG user.MQTTSubscribe: (Service) Using 
Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG user.MQTTSubscribe: (Service) 
Platform Linux-5.4.83-v7+-armv7l-with-debian-10.7
Feb  9 17:15:28 WeeWX weewx[1377] DEBUG user.MQTTSubscribe: (Service) 
Locale is 'sk_SK.UTF-8'
Feb  9 17:15:28 WeeWX weewx[1377] INFO user.MQTTSubscribe: (Service) 
Version is 2.0.0-rc03
Feb  9 17:15:28 WeeWX weewx[1377] INF