subject:"RE\: \[weewx\-user\] acurite lightning detector"

RE: [weewx-user] acurite lightning detector

2017-02-17 Thread Clay Jackson

And I just talked to Acurite – read them the “QC” number off the battery cover 
and they said “we’re sending you a new one”.  :)

 

 

From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On 
Behalf Of Clay Jackson
Sent: Friday, February 17, 2017 11:28 AM
To: weewx-user@googlegroups.com
Subject: RE: [weewx-user] acurite lightning detector

 

Just did the “hard reset” routine – left batteries out for several hours.   The 
sensor is in a room where the tempo ranges from about 64-75.   Last night, for 
about 2 hours, it APPEARED to be reading OK – fluctuating right around 65, in 
line with a mercury thermometer I use for testing.   Came in this morning, it 
started a few degrees low (61 – mercury was 66) but has since climbed WAY 
above, mercury reading 75, sensor reading 87.8

 

Other than a bad sensor, anyone have any ideas?

 

Thanks in advance!

Clay Jackson

 

 

From: weewx-user@googlegroups.com <mailto:weewx-user@googlegroups.com>  
[mailto:weewx-user@googlegroups.com] On Behalf Of Clay Jackson
Sent: Thursday, February 16, 2017 3:20 PM
To: weewx-user@googlegroups.com <mailto:weewx-user@googlegroups.com> 
Subject: Re: [weewx-user] acurite lightning detector

 

Downloaded and it's now capturing - temp is way off (30+ degrees high); but I 
suspect that's either an RTL or Acurite issue

Sent from my iPhone

Clay Jackson

 


On Feb 16, 2017, at 12:21 PM, Clay Jackson mailto:cl...@nwlink.com> > wrote:

Hi, Matt – so, here’s what I see in weewx.log

 

Feb 16 12:18:41 Weather weewx[14361]: sdr: MainThread: AcuriteLightningPacket: 
unrecognized data: '2017-02-16 20:18:41 Acurite lightning 0x2B6F Ch A Msg Type 
0x4f: 67 C 66 % RH Strikes 3 Distance 31 - c0  2b  6f  42  cf  c3  03  9f  
d0*#012'

 

And here’s the SDR part of my config

[SDR]

# This section is for the software-defined radio driver.

 

# The driver to use

driver = user.sdr

path = /usr/local/bin

[[sensor_map]]

windDir = wind_dir.04C9.Acurite5n1Packet

windSpeed = wind_speed.04C9.Acurite5n1Packet

outTemp = temperature.04C9.Acurite5n1Packet

outHumidity = humidity.04C9.Acurite5n1Packet

rain_total = rain_total.04C9.Acurite5n1Packet

extraTemp1 = temperature.2B6F.AcuriteLightningPacket

extraHumid1 = humidity.2B6F.AcuriteLightningPacket

strikes = strikes_total.2B6F.AcuriteLightningPacket

[[deltas]]

strikes = strikes_total

Haven’t done a debug yet;  but will report that next.

 

From: weewx-user@googlegroups.com <mailto:weewx-user@googlegroups.com>  
[mailto:weewx-user@googlegroups.com] On Behalf Of mwall
Sent: Tuesday, February 14, 2017 6:52 AM
To: weewx-user mailto:weewx-user@googlegroups.com> >
Subject: [weewx-user] acurite lightning detector

 

>From: Clay Jackson
>Subject: Acurite Lighning Sensor
>Date: 13 February 2017 23:21:23 EST
>
> Hi, Matthew – new topic/question.   I have one of the Acurite Lighting 
> sensors and would like to
> integrate it into the weewx SDR.  It looks right now as if it’s not really 
> supported. I tried just
> mapping the senors and got some screwy results (see an earlier post).  Then I 
> went back
> and read the code; and it looks like the RTL driver is just dumping data, 
> rather than doing
> a “real” decode.   I’d be happy to work with you on seeing if we can get it 
> working – let me
> know if you’d like to try that.
> 
> Thanks!
> 
> Clay Jackson

clay,

this is typical output from the lightning detector, as returned by rtl_433:

2016-11-04 04:34:58 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
Strikes 50 Distance 69 - c0  53  6f  3a  d1  0f  b2  c5  13*
2016-11-04 04:43:14 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
Strikes 55 Distance 5 - c0  53  6f  3a  d1  0f  b7  05  58*

with a SDR configuration and sensor_map like this:

[SDR]
driver = user.sdr
cmd = rtl_433 -q -U -G -F json
[[sensor_map]]
windDir = wind_dir.0BFA.Acurite5n1Packet
windSpeed = wind_speed.0BFA.Acurite5n1Packet
outTemp = temperature.0BFA.Acurite5n1Packet
outHumidity = humidity.0BFA.Acurite5n1Packet
outTempBatteryStatus = battery.0BFA.Acurite5n1Packet
inTemp = temperature.24A4.AcuriteTowerPacket
inHumidity = humidity.24A4.AcuriteTowerPacket
txBatteryStatus = battery.24A4.AcuriteTowerPacket
extraTemp2 = temperature.526F.AcuriteLightningPacket
extraHumid2 = humidity.526F.AcuriteLightningPacket
distance = distance.526F.AcuriteLightningPacket
strikes_total = strikes_total.526F.AcuriteLightningPacket
[[deltas]]
strikes = strikes_total

the weewx-sdr driver parses lightning sensor output into packets something like 
this:

LOOP:   2017-02-14 09:50:31 EST (1487083831) altimeter: None, appTemp: None, 
barometer: None, cloudbase: None,

RE: [weewx-user] acurite lightning detector

2017-02-17 Thread Clay Jackson

Just did the “hard reset” routine – left batteries out for several hours.   The 
sensor is in a room where the tempo ranges from about 64-75.   Last night, for 
about 2 hours, it APPEARED to be reading OK – fluctuating right around 65, in 
line with a mercury thermometer I use for testing.   Came in this morning, it 
started a few degrees low (61 – mercury was 66) but has since climbed WAY 
above, mercury reading 75, sensor reading 87.8

 

Other than a bad sensor, anyone have any ideas?

 

Thanks in advance!



Clay Jackson

 

 

From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On 
Behalf Of Clay Jackson
Sent: Thursday, February 16, 2017 3:20 PM
To: weewx-user@googlegroups.com
Subject: Re: [weewx-user] acurite lightning detector

 

Downloaded and it's now capturing - temp is way off (30+ degrees high); but I 
suspect that's either an RTL or Acurite issue

Sent from my iPhone

Clay Jackson

 


On Feb 16, 2017, at 12:21 PM, Clay Jackson mailto:cl...@nwlink.com> > wrote:

Hi, Matt – so, here’s what I see in weewx.log

 

Feb 16 12:18:41 Weather weewx[14361]: sdr: MainThread: AcuriteLightningPacket: 
unrecognized data: '2017-02-16 20:18:41 Acurite lightning 0x2B6F Ch A Msg Type 
0x4f: 67 C 66 % RH Strikes 3 Distance 31 - c0  2b  6f  42  cf  c3  03  9f  
d0*#012'

 

And here’s the SDR part of my config

[SDR]

# This section is for the software-defined radio driver.

 

# The driver to use

driver = user.sdr

path = /usr/local/bin

[[sensor_map]]

windDir = wind_dir.04C9.Acurite5n1Packet

windSpeed = wind_speed.04C9.Acurite5n1Packet

outTemp = temperature.04C9.Acurite5n1Packet

outHumidity = humidity.04C9.Acurite5n1Packet

rain_total = rain_total.04C9.Acurite5n1Packet

extraTemp1 = temperature.2B6F.AcuriteLightningPacket

extraHumid1 = humidity.2B6F.AcuriteLightningPacket

strikes = strikes_total.2B6F.AcuriteLightningPacket

[[deltas]]

strikes = strikes_total

Haven’t done a debug yet;  but will report that next.

 

From: weewx-user@googlegroups.com <mailto:weewx-user@googlegroups.com>  
[mailto:weewx-user@googlegroups.com] On Behalf Of mwall
Sent: Tuesday, February 14, 2017 6:52 AM
To: weewx-user mailto:weewx-user@googlegroups.com> >
Subject: [weewx-user] acurite lightning detector

 

>From: Clay Jackson
>Subject: Acurite Lighning Sensor
>Date: 13 February 2017 23:21:23 EST
>
> Hi, Matthew – new topic/question.   I have one of the Acurite Lighting 
> sensors and would like to
> integrate it into the weewx SDR.  It looks right now as if it’s not really 
> supported. I tried just
> mapping the senors and got some screwy results (see an earlier post).  Then I 
> went back
> and read the code; and it looks like the RTL driver is just dumping data, 
> rather than doing
> a “real” decode.   I’d be happy to work with you on seeing if we can get it 
> working – let me
> know if you’d like to try that.
> 
> Thanks!
> 
> Clay Jackson

clay,

this is typical output from the lightning detector, as returned by rtl_433:

2016-11-04 04:34:58 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
Strikes 50 Distance 69 - c0  53  6f  3a  d1  0f  b2  c5  13*
2016-11-04 04:43:14 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
Strikes 55 Distance 5 - c0  53  6f  3a  d1  0f  b7  05  58*

with a SDR configuration and sensor_map like this:

[SDR]
driver = user.sdr
cmd = rtl_433 -q -U -G -F json
[[sensor_map]]
windDir = wind_dir.0BFA.Acurite5n1Packet
windSpeed = wind_speed.0BFA.Acurite5n1Packet
outTemp = temperature.0BFA.Acurite5n1Packet
outHumidity = humidity.0BFA.Acurite5n1Packet
outTempBatteryStatus = battery.0BFA.Acurite5n1Packet
inTemp = temperature.24A4.AcuriteTowerPacket
inHumidity = humidity.24A4.AcuriteTowerPacket
txBatteryStatus = battery.24A4.AcuriteTowerPacket
extraTemp2 = temperature.526F.AcuriteLightningPacket
extraHumid2 = humidity.526F.AcuriteLightningPacket
distance = distance.526F.AcuriteLightningPacket
strikes_total = strikes_total.526F.AcuriteLightningPacket
[[deltas]]
strikes = strikes_total

the weewx-sdr driver parses lightning sensor output into packets something like 
this:

LOOP:   2017-02-14 09:50:31 EST (1487083831) altimeter: None, appTemp: None, 
barometer: None, cloudbase: None, dateTime: 1487083831, dewpoint: None, 
distance: 15.0, extraHumid2: 35.0, extraTemp2: 55.4, heatindex: None, humidex: 
None, inDewpoint: None, maxSolarRad: None, rainRate: 0, strikes: 0.0, 
strikes_total: 61.0, usUnits: 1, windchill: None

is that what you see?

m

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email

Re: [weewx-user] acurite lightning detector

2017-02-16 Thread Clay Jackson

Downloaded and it's now capturing - temp is way off (30+ degrees high); but I 
suspect that's either an RTL or Acurite issue

Sent from my iPhone
Clay Jackson


> On Feb 16, 2017, at 12:21 PM, Clay Jackson  wrote:
> 
> Hi, Matt – so, here’s what I see in weewx.log
>  
> Feb 16 12:18:41 Weather weewx[14361]: sdr: MainThread: 
> AcuriteLightningPacket: unrecognized data: '2017-02-16 20:18:41 Acurite 
> lightning 0x2B6F Ch A Msg Type 0x4f: 67 C 66 % RH Strikes 3 Distance 31 - c0  
> 2b  6f  42  cf  c3  03  9f  d0*#012'
>  
> And here’s the SDR part of my config
> [SDR]
> # This section is for the software-defined radio driver.
>  
> # The driver to use
> driver = user.sdr
> path = /usr/local/bin
> [[sensor_map]]
> windDir = wind_dir.04C9.Acurite5n1Packet
> windSpeed = wind_speed.04C9.Acurite5n1Packet
> outTemp = temperature.04C9.Acurite5n1Packet
> outHumidity = humidity.04C9.Acurite5n1Packet
> rain_total = rain_total.04C9.Acurite5n1Packet
> extraTemp1 = temperature.2B6F.AcuriteLightningPacket
> extraHumid1 = humidity.2B6F.AcuriteLightningPacket
> strikes = strikes_total.2B6F.AcuriteLightningPacket
> [[deltas]]
> strikes = strikes_total
> Haven’t done a debug yet;  but will report that next.
>  
> From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On 
> Behalf Of mwall
> Sent: Tuesday, February 14, 2017 6:52 AM
> To: weewx-user 
> Subject: [weewx-user] acurite lightning detector
>  
> >From: Clay Jackson
> >Subject: Acurite Lighning Sensor
> >Date: 13 February 2017 23:21:23 EST
> >
> > Hi, Matthew – new topic/question.   I have one of the Acurite Lighting 
> > sensors and would like to
> > integrate it into the weewx SDR.  It looks right now as if it’s not really 
> > supported. I tried just
> > mapping the senors and got some screwy results (see an earlier post).  Then 
> > I went back
> > and read the code; and it looks like the RTL driver is just dumping data, 
> > rather than doing
> > a “real” decode.   I’d be happy to work with you on seeing if we can get it 
> > working – let me
> > know if you’d like to try that.
> > 
> > Thanks!
> > 
> > Clay Jackson
> 
> clay,
> 
> this is typical output from the lightning detector, as returned by rtl_433:
> 
> 2016-11-04 04:34:58 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
> Strikes 50 Distance 69 - c0  53  6f  3a  d1  0f  b2  c5  13*
> 2016-11-04 04:43:14 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
> Strikes 55 Distance 5 - c0  53  6f  3a  d1  0f  b7  05  58*
> 
> with a SDR configuration and sensor_map like this:
> 
> [SDR]
> driver = user.sdr
> cmd = rtl_433 -q -U -G -F json
> [[sensor_map]]
> windDir = wind_dir.0BFA.Acurite5n1Packet
> windSpeed = wind_speed.0BFA.Acurite5n1Packet
> outTemp = temperature.0BFA.Acurite5n1Packet
> outHumidity = humidity.0BFA.Acurite5n1Packet
> outTempBatteryStatus = battery.0BFA.Acurite5n1Packet
> inTemp = temperature.24A4.AcuriteTowerPacket
> inHumidity = humidity.24A4.AcuriteTowerPacket
> txBatteryStatus = battery.24A4.AcuriteTowerPacket
> extraTemp2 = temperature.526F.AcuriteLightningPacket
> extraHumid2 = humidity.526F.AcuriteLightningPacket
> distance = distance.526F.AcuriteLightningPacket
> strikes_total = strikes_total.526F.AcuriteLightningPacket
> [[deltas]]
> strikes = strikes_total
> 
> the weewx-sdr driver parses lightning sensor output into packets something 
> like this:
> 
> LOOP:   2017-02-14 09:50:31 EST (1487083831) altimeter: None, appTemp: None, 
> barometer: None, cloudbase: None, dateTime: 1487083831, dewpoint: None, 
> distance: 15.0, extraHumid2: 35.0, extraTemp2: 55.4, heatindex: None, 
> humidex: None, inDewpoint: None, maxSolarRad: None, rainRate: 0, strikes: 
> 0.0, strikes_total: 61.0, usUnits: 1, windchill: None
> 
> is that what you see?
> 
> m
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] acurite lightning detector

2017-02-16 Thread mwall



On Thursday, February 16, 2017 at 3:21:34 PM UTC-5, Clay Jackson wrote:
>
> Hi, Matt – so, here’s what I see in weewx.log
>
>  
>
> Feb 16 12:18:41 Weather weewx[14361]: sdr: MainThread: 
> AcuriteLightningPacket: unrecognized data: '2017-02-16 20:18:41 Acurite 
> lightning 0x2B6F Ch A Msg Type 0x4f: 67 C 66 % RH Strikes 3 Distance 31 - 
> c0  2b  6f  42  cf  c3  03  9f  d0*#012'
>

clay,

this is fixed in version 0.22 of weewx-sdr.  your sensor emits a hex 
message type of 0x47, but the previous parser was looking for only digits, 
not hex.

m 

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: [weewx-user] acurite lightning detector

2017-02-16 Thread Clay Jackson

Hi, Matt – so, here’s what I see in weewx.log

 

Feb 16 12:18:41 Weather weewx[14361]: sdr: MainThread: AcuriteLightningPacket: 
unrecognized data: '2017-02-16 20:18:41 Acurite lightning 0x2B6F Ch A Msg Type 
0x4f: 67 C 66 % RH Strikes 3 Distance 31 - c0  2b  6f  42  cf  c3  03  9f  
d0*#012'

 

And here’s the SDR part of my config

[SDR]

# This section is for the software-defined radio driver.

 

# The driver to use

driver = user.sdr

path = /usr/local/bin

[[sensor_map]]

windDir = wind_dir.04C9.Acurite5n1Packet

windSpeed = wind_speed.04C9.Acurite5n1Packet

outTemp = temperature.04C9.Acurite5n1Packet

outHumidity = humidity.04C9.Acurite5n1Packet

rain_total = rain_total.04C9.Acurite5n1Packet

extraTemp1 = temperature.2B6F.AcuriteLightningPacket

extraHumid1 = humidity.2B6F.AcuriteLightningPacket

strikes = strikes_total.2B6F.AcuriteLightningPacket

[[deltas]]

strikes = strikes_total

Haven’t done a debug yet;  but will report that next.

 

From: weewx-user@googlegroups.com [mailto:weewx-user@googlegroups.com] On 
Behalf Of mwall
Sent: Tuesday, February 14, 2017 6:52 AM
To: weewx-user 
Subject: [weewx-user] acurite lightning detector

 

>From: Clay Jackson
>Subject: Acurite Lighning Sensor
>Date: 13 February 2017 23:21:23 EST
>
> Hi, Matthew – new topic/question.   I have one of the Acurite Lighting 
> sensors and would like to
> integrate it into the weewx SDR.  It looks right now as if it’s not really 
> supported. I tried just
> mapping the senors and got some screwy results (see an earlier post).  Then I 
> went back
> and read the code; and it looks like the RTL driver is just dumping data, 
> rather than doing
> a “real” decode.   I’d be happy to work with you on seeing if we can get it 
> working – let me
> know if you’d like to try that.
> 
> Thanks!
> 
> Clay Jackson

clay,

this is typical output from the lightning detector, as returned by rtl_433:

2016-11-04 04:34:58 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
Strikes 50 Distance 69 - c0  53  6f  3a  d1  0f  b2  c5  13*
2016-11-04 04:43:14 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
Strikes 55 Distance 5 - c0  53  6f  3a  d1  0f  b7  05  58*

with a SDR configuration and sensor_map like this:

[SDR]
driver = user.sdr
cmd = rtl_433 -q -U -G -F json
[[sensor_map]]
windDir = wind_dir.0BFA.Acurite5n1Packet
windSpeed = wind_speed.0BFA.Acurite5n1Packet
outTemp = temperature.0BFA.Acurite5n1Packet
outHumidity = humidity.0BFA.Acurite5n1Packet
outTempBatteryStatus = battery.0BFA.Acurite5n1Packet
inTemp = temperature.24A4.AcuriteTowerPacket
inHumidity = humidity.24A4.AcuriteTowerPacket
txBatteryStatus = battery.24A4.AcuriteTowerPacket
extraTemp2 = temperature.526F.AcuriteLightningPacket
extraHumid2 = humidity.526F.AcuriteLightningPacket
distance = distance.526F.AcuriteLightningPacket
strikes_total = strikes_total.526F.AcuriteLightningPacket
[[deltas]]
strikes = strikes_total

the weewx-sdr driver parses lightning sensor output into packets something like 
this:

LOOP:   2017-02-14 09:50:31 EST (1487083831) altimeter: None, appTemp: None, 
barometer: None, cloudbase: None, dateTime: 1487083831, dewpoint: None, 
distance: 15.0, extraHumid2: 35.0, extraTemp2: 55.4, heatindex: None, humidex: 
None, inDewpoint: None, maxSolarRad: None, rainRate: 0, strikes: 0.0, 
strikes_total: 61.0, usUnits: 1, windchill: None

is that what you see?

m

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com 
 .
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] acurite lightning detector

2017-02-14 Thread Clay Jackson

Actually, no - what I'm seeing is just the string I sent in the message.  Will 
try some more debugging tomorrow nite or Thursday.

Sent from my iPhone
Clay Jackson


> On Feb 14, 2017, at 6:52 AM, mwall  wrote:
> 
> >From: Clay Jackson
> >Subject: Acurite Lighning Sensor
> >Date: 13 February 2017 23:21:23 EST
> >
> > Hi, Matthew – new topic/question.   I have one of the Acurite Lighting 
> > sensors and would like to
> > integrate it into the weewx SDR.  It looks right now as if it’s not really 
> > supported. I tried just
> > mapping the senors and got some screwy results (see an earlier post).  Then 
> > I went back
> > and read the code; and it looks like the RTL driver is just dumping data, 
> > rather than doing
> > a “real” decode.   I’d be happy to work with you on seeing if we can get it 
> > working – let me
> > know if you’d like to try that.
> > 
> > Thanks!
> > 
> > Clay Jackson
> 
> clay,
> 
> this is typical output from the lightning detector, as returned by rtl_433:
> 
> 2016-11-04 04:34:58 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
> Strikes 50 Distance 69 - c0  53  6f  3a  d1  0f  b2  c5  13*
> 2016-11-04 04:43:14 Acurite lightning 0x536F Ch A Msg Type 0x51: 15 C 58 % RH 
> Strikes 55 Distance 5 - c0  53  6f  3a  d1  0f  b7  05  58*
> 
> with a SDR configuration and sensor_map like this:
> 
> [SDR]
> driver = user.sdr
> cmd = rtl_433 -q -U -G -F json
> [[sensor_map]]
> windDir = wind_dir.0BFA.Acurite5n1Packet
> windSpeed = wind_speed.0BFA.Acurite5n1Packet
> outTemp = temperature.0BFA.Acurite5n1Packet
> outHumidity = humidity.0BFA.Acurite5n1Packet
> outTempBatteryStatus = battery.0BFA.Acurite5n1Packet
> inTemp = temperature.24A4.AcuriteTowerPacket
> inHumidity = humidity.24A4.AcuriteTowerPacket
> txBatteryStatus = battery.24A4.AcuriteTowerPacket
> extraTemp2 = temperature.526F.AcuriteLightningPacket
> extraHumid2 = humidity.526F.AcuriteLightningPacket
> distance = distance.526F.AcuriteLightningPacket
> strikes_total = strikes_total.526F.AcuriteLightningPacket
> [[deltas]]
> strikes = strikes_total
> 
> the weewx-sdr driver parses lightning sensor output into packets something 
> like this:
> 
> LOOP:   2017-02-14 09:50:31 EST (1487083831) altimeter: None, appTemp: None, 
> barometer: None, cloudbase: None, dateTime: 1487083831, dewpoint: None, 
> distance: 15.0, extraHumid2: 35.0, extraTemp2: 55.4, heatindex: None, 
> humidex: None, inDewpoint: None, maxSolarRad: None, rainRate: 0, strikes: 
> 0.0, strikes_total: 61.0, usUnits: 1, windchill: None
> 
> is that what you see?
> 
> m
> -- 
> You received this message because you are subscribed to the Google Groups 
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

RE: [weewx-user] acurite lightning detector

RE: [weewx-user] acurite lightning detector

Re: [weewx-user] acurite lightning detector

Re: [weewx-user] acurite lightning detector

RE: [weewx-user] acurite lightning detector

Re: [weewx-user] acurite lightning detector

6 matches

Site Navigation

Mail list logo

Footer information