Re: [Ninux-Wireless] OpenWRT configurare connessione Ad-Hoc
Il giorno 10 febbraio 2014 13:40, Massimiliano CARNEMOLLA < massimili...@null.net> ha scritto: > Cambiare l'HT mode da 20 a 40 Mhz potrebbe risolvere il problema della > distanza ? > > Effettunado il peer con l'altro nodo (utilizzando da entrambe le parti ip > statico) sulla lista dell'associated station non compare l'IP dell'altro > nodo e non si riesce a pingarlo pur conoscendolo. > > Con la (quasi) stessa configurazione i miei nodi funzionano, l'unica > differenza e' che sui miei puo' esserci una distanza di 100 mt. > L'HT mode è il channel width, ovvero la dimensione del canale. 40 dovresti avere 20mhz a sinistra della center frequency e altre 20 alla destra. In altre parole "l'ampiezza" del canale determina anche la banda, con 40mhz hai una banda maggiore. Settare la width del canale, nel caso di 20 mhz o minore, può tornare utile se con 40mhz si collide con altre reti terze (rumore); in questo caso il canale più "ristretto" soffre meno del rumore a patto che la banda disponibile abbia un trade-off positivo. ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
Re: [Ninux-Wireless] OpenWRT configurare connessione Ad-Hoc
Quale e' la tua config in questi due files ? /etc/config/network /etc/config/wireless Saverio Il 09 febbraio 2014 10:11, Salvatore Tringale ha scritto: > Ciao a tutti, > ho due dispositivi Picostation M2 HP con su installato OpenWRT AA, si tratta > di due nodi posizionati a 250mt so che si vedono e funzionano perchè fino a > poco tempo fa ho usato MeOS, in ottica Ninux ho deciso di fare esperienza > con OpenWRT ma mi sono arenato! > > Il mio obiettivo è di fare una connessione punto punto in modalità Ad-Hoc, > ma non ci riesco e non capisco dove sbaglio. > Ammetto di essere scarso da riga di comando e mi sono buttato sul web ed ho > fatto una ricerca nei due archivi della mailing, nelle faq, nelle guide, sul > forum openwrt e non voglio script autoconfiguranti... ma da tutte le parti > sembra che questa connessione Ad-Hoc cada in automatico dal cielo :) > > Per favore mi date una mano, sono in stallo...mi potete indicare un sito o > una guida che contenga proprio la descrizione mirata di questa procedura. > Poi per imparare tutto OpenWRT mi ci metto, ma almeno iniziare ad avere un > link funzionante per un neofita come me è una conquista molto incentivante! > > Grazie per il vostro aiuto, e scusate il piccolo sfogo :) > > Salvo "Triky" Tringale > > > > ___ > Wireless mailing list > Wireless@ml.ninux.org > http://ml.ninux.org/mailman/listinfo/wireless > ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
Re: [Ninux-Wireless] OpenWRT configurare connessione Ad-Hoc
Cambiare l'HT mode da 20 a 40 Mhz potrebbe risolvere il problema della distanza ? Effettunado il peer con l'altro nodo (utilizzando da entrambe le parti ip statico) sulla lista dell'associated station non compare l'IP dell'altro nodo e non si riesce a pingarlo pur conoscendolo. Con la (quasi) stessa configurazione i miei nodi funzionano, l'unica differenza e' che sui miei puo' esserci una distanza di 100 mt. ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
[Ninux-Wireless] BattleMesh v7 talk and workshop proposals now welcome!
Do you have an idea or project related to mesh routing protocols? Are you involved in a community networking project that uses a mesh network? Are you aware of a related issue that you think should be discussed? Your workshop or presentation proposal is welcomed to BattleMeshV7 Leipzig! What is Battlemesh? --- The Wireless Battle of the Mesh is an event that aims at bringing together people from across Europe and beyond to test the performance of different routing protocols for ad-hoc networks, like Babel, B.A.T.M.A.N., BMX, OLSR, 802.11s and Static Routing. It is a tournament with a social character. If you are a mesh networking enthusiast, community networking activist, or have an interest in mesh networks you might want to check this out ! The goal of the WirelessBattleMesh events is to set-up hands-on testbed for each available mesh routing protocol with a standard test procedure for the different mesh networks. During the different WBM events, similar hardware and software configuration will be used based on the OpenWRT BoardSupportPackage and packages for each protocol implementation. The WBM events are also a great opportunity to develop testing tools for PHY/MAC radio layers (drivers, scripts and PHY analyzers) . This years Battlemesh will take place from 12 - 18 May 2014 in Leipzig, Germany at the Sublab, Karl-Heine-Straße 93, 04229 Leipzig. http://battlemesh.org Format and topic of talks - Workshops or talks relating directly to open source mesh routing protocols will be prioritised, but we welcome proposals of anything you think may be of interest to mesh routing and community networking enthusiasts. They may take any format, for example a presentation, talk, discussion, debate, practical workshop, or film showing. The suggested length for talks is one hour (40 minutes talk, 10 minutes questions and 10 minutes break/buffer). To get an idea of the kinds of talks and workshops at the previous events, see http://battlemesh.org/BattleMeshV6/Agenda, http://battlemesh.org/BattleMeshV5/Agenda and http://battlemesh.org/BattleMeshV4/Agenda Lightening talks Lightening talks are shorter talks which can be submitted later than the main workshops deadline, to allow everybody to have the opportunity to present their project/idea. Each lightening talk will be 7 minutes long followed by 3 minutes of questions. Projector slides can be submitted before in PDF format to: submissi...@battlemesh.org Submissions --- To allow an efficient handling of your proposal, please provide the following information and send them by email to the email to the address below: * Your name * What format will it take (talk/workshop/panel discussion/lightening talk) * Your topic headline * Your topic description which can be brief (does not need to exceed a couple of lines) but should provide a reasonable summary of your talk * The dates of your stay at the event and (optional) preferred day for your slot * The length of the slot if you wish to do a workshop (all other slots will be limited to one hour) * Any requirements you need, for example, a projector. Deadline The deadline for proposals is the 1st of May. Contact --- Email your proposals or specific questions to: submissi...@battlemesh.org For general questions, please use the Battlemesh mailing list: http://ml.ninux.org/mailman/listinfo/battlemesh Please forward this message any groups or individuals who might be interested. ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
[Ninux-Wireless] Ninux @ Battlemesh
Ninux supporta e partecipa al Wireless Battle of the Mesh v7 che si terrà dal 12al 18Maggio a Lipsia (Germania) presso il Sublab. http://blog.ninux.org/2014/02/09/ninux-org-invade-il-battlemesh/ Il battlemesh è un evento dove si incontrano: * sviluppatori dei protocolli di routing come OLSR, BATMAN, BMX6, BABEL * sviluppatori OpenWRT * sviluppatori firmware basati su OpenWRT(qmp, commotionwireless, libremesh) * partecipanti più attivi delle communitynetwork (guifi, awmn, freifunk, funkfeuer, ninux, wlan slovenja, ecc) * hackers interessati alle reti wireless e alle reti comunitarie Non sarai un vero ninuxiano doc se non sei andato almeno una volta al battlemesh! Quest'anno saremo in tanti, abbiamo prenotato una convenzione che con 175€ copre il pernottamento e 2 cene, - fino al 15 Febbraio c'è uno sconto e costa solo 150€, maggiori info qui: http://battlemesh.org/BattleMeshV7#Participant_Registration_and_Fee Mailing list: http://ml.ninux.org/mailman/listinfo/battlemesh Se potete farci un favore diffondete questa notizia, ve ne saremo grati! Nemesis signature.asc Description: OpenPGP digital signature ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless