Re: [WISPA] Which CCR Router OS combo is the most solid?

2017-01-23 Thread Nicholas Eastman 
We run 1036s at several of our larger sites, all running 6.30.4 or 
newer. We haven't had any issues with traffic. Three of them are our 
gateway routers running BGP and OSPF side by side on Gigabit connections.


Nicholas Eastman
Infrastructure Technician
Royell Communications Inc.
nic.east...@royell.org
Phone: 1-877-400-9319
Cell: 217-416-9485
Fax: 217-965-3951

On 1/19/2017 7:07 AM, Gino Villarini wrote:

For L3 OSPF routed network capable of gigabit traffic

*//*

*/Gino Villarini/*

President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968



___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Mikrotik MPLS with ECMP?

2016-09-20 Thread Nicholas Eastman 
Ok, so if I set up a couple of TE tunnels, do I have to statically set 
up routing across them, or is there a way to have the routers just pick 
it up and run with the new interfaces dynamically?


Nicholas Eastman
Infrastructure Technician
Royell Communications, Inc.
1-877-400-9319
Fax: 1-217-965-3951
nic.east...@royell.org

On 9/12/2016 3:38 PM, Justin Miller wrote:
MPLS does not use the underlying ecmp from routes/OSPF at all. MPLS TE 
is your best bet.


*Justin Miller*

 VA SkyWire, LLC
 3114 W Marshall St, Ste A
 Richmond, VA 23230
 Office: (804) 521-4212
 Desk: (804) 591-0500 ext 101
 Fax: (804) 591-1559
jus...@vaskywire.com <mailto:jus...@vaskywire.com>

On Sep 12, 2016, at 4:20 PM, Nicholas Eastman <mailto:nic.east...@royell.org>> wrote:


We have a two POPs that are connected with both a 1G fiber transport and
two 236Mbps wireless backhauls. We are using ECMP in OSPF to achieve a
sort of bandwidth sharing with them, but would like to enable MPLS
across our network. With this being said, we would like to be able to
keep some semblance of ECMP/TE on the network to be able to utilize all
three links at the same time. Has anyone tried or had luck with this?
I've read a few posts on the forum saying that MPLS-TE should be able to
do this, but I have yet been able to reproduce this in a test lab.


--
Nicholas Eastman
Infrastructure Technician
Royell Communications, Inc.
1-877-400-9319
Fax: 1-217-965-3951
nic.east...@royell.org <mailto:nic.east...@royell.org>

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless




___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless


___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

[WISPA] Mikrotik MPLS with ECMP?

2016-09-12 Thread Nicholas Eastman 
We have a two POPs that are connected with both a 1G fiber transport and 
two 236Mbps wireless backhauls. We are using ECMP in OSPF to achieve a 
sort of bandwidth sharing with them, but would like to enable MPLS 
across our network. With this being said, we would like to be able to 
keep some semblance of ECMP/TE on the network to be able to utilize all 
three links at the same time. Has anyone tried or had luck with this? 
I've read a few posts on the forum saying that MPLS-TE should be able to 
do this, but I have yet been able to reproduce this in a test lab.


-- 
Nicholas Eastman
Infrastructure Technician
Royell Communications, Inc.
1-877-400-9319
Fax: 1-217-965-3951
nic.east...@royell.org

___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless