Re: [WISPA] Need a new AP
It will. I have 4 set up like that right now, well with the 5 version, not the 2 but it's essentially the same. As long as the AirMax is turned off on the Bullet it works perfectly. Bob- -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scottie Arnett Sent: Friday, November 20, 2009 10:03 AM To: WISPA General List Subject: Re: [WISPA] Need a new AP So a BulletM2HP will not work with a Nano NS2? Scottie -- Original Message -- From: AJ Reply-To: WISPA General List Date: Thu, 19 Nov 2009 15:21:02 -0700 >Hahaha Gmail ads came up with this firmware as I was reading this thread: > >http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php > >chop >*Adds 802.11-compatible encryption modes >*The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware >adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. >/chop > > >Pretty spendy for just a single unit... > >On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: > >> In that case, use a MikroTik RB411R. >> Integrated radio, and MT can do various encryptions you need. >> >> Sorry, I overlooked that part of the request. >> >> On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: >> >> > Bullet M2's won't do WEP until the release of firmware version 5.1 which >> > has been "in just a couple of weeks" for at least the last two months. >> > >> > >> > >> > Jayson Baker wrote: >> > > UBNT Bullet M2? >> > > >> > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: >> > > >> > > >> > >> I have one small group on an old Cisco Aironet 350, which only does >> > >> 802.11b. >> > >> >> > >> 1) I want to have at least a b/g mix, n capable a bonus. >> > >> >> > >> 2) Must support WEP encryption, but be able to handle a mix of WEP >> and >> > >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >> > >> >> > >> 3) Must play nice with Tranzeo CPQ and CPE200. >> > >> >> > >> You input is helpful. >> > >> >> > >> TIA, >> > >> >> > >> Pat >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> WISPA Wants You! Join today! >> > >> http://signup.wispa.org/ >> > >> >> > >> >> > >> >> > >> >> > >> WISPA Wireless List: wireless@wispa.org >> > >> >> > >> Subscribe/Unsubscribe: >> > >> http://lists.wispa.org/mailman/listinfo/wireless >> > >> >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> >> > >> >> > > >> > > >> > > >> > >> >> > > WISPA Wants You! Join today! >> > > http://signup.wispa.org/ >> > > >> > >> >> > > >> > > WISPA Wireless List: wireless@wispa.org >> > > >> > > Subscribe/Unsubscribe: >> > > http://lists.wispa.org/mailman/listinfo/wireless >> > > >> > > Archives: http://lists.wispa.org/pipermail/wireless/ >> > > >> > > >> > > >> > >> > >> > >> > >> > >> >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> > >> > >> >> > >> > WISPA Wireless List: wireless@wispa.org >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -
Re: [WISPA] Need a new AP
UBNT says it will: I received these two replies to that question (sort of, my question was a Bullet2M HP and a PowerStation2 connecting): NUMBER1 Hello, yes the TDMA can be disabled. Our full 802.11b/g support is coming in V5.1 of our firmware. Thanks, _ Michael Ford Support and Applications Manager Support Line - (408)942-1153 Main Line - (408)942-3085 Email: supp...@ubnt.com (Live Chat 10am-5pm PST) Skype: ubiquiti_support NUMBER2 Hello, All of our M series can currently disable TDMA. Thanks, _ Michael Ford Support and Applications Manager Support Line - (408)942-1153 Main Line - (408)942-3085 Email: supp...@ubnt.com (Live Chat 10am-5pm PST) Skype: ubiquiti_support On Nov 20, 2009, at 10:02 AM, Scottie Arnett wrote: > So a BulletM2HP will not work with a Nano NS2? > > Scottie > > -- Original Message -- > From: AJ > Reply-To: WISPA General List > Date: Thu, 19 Nov 2009 15:21:02 -0700 > >> Hahaha Gmail ads came up with this firmware as I was reading this thread: >> >> http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php >> >> chop >> *Adds 802.11-compatible encryption modes >> *The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware >> adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. >> /chop >> >> >> Pretty spendy for just a single unit... >> >> On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: >> >>> In that case, use a MikroTik RB411R. >>> Integrated radio, and MT can do various encryptions you need. >>> >>> Sorry, I overlooked that part of the request. >>> >>> On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: >>> Bullet M2's won't do WEP until the release of firmware version 5.1 which has been "in just a couple of weeks" for at least the last two months. Jayson Baker wrote: > UBNT Bullet M2? > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > >> I have one small group on an old Cisco Aironet 350, which only does >> 802.11b. >> >> 1) I want to have at least a b/g mix, n capable a bonus. >> >> 2) Must support WEP encryption, but be able to handle a mix of WEP >>> and >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >> >> 3) Must play nice with Tranzeo CPQ and CPE200. >> >> You input is helpful. >> >> TIA, >> >> Pat >> >> >> >> >> >>> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >>> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > >>> > WISPA Wants You! Join today! > http://signup.wispa.org/ > >>> > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > >>> WISPA Wants You! Join today! http://signup.wispa.org/ >>> WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> --- >> [This E-mail scann
Re: [WISPA] Need a new AP
So a BulletM2HP will not work with a Nano NS2? Scottie -- Original Message -- From: AJ Reply-To: WISPA General List Date: Thu, 19 Nov 2009 15:21:02 -0700 >Hahaha Gmail ads came up with this firmware as I was reading this thread: > >http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php > >chop >*Adds 802.11-compatible encryption modes >*The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware >adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. >/chop > > >Pretty spendy for just a single unit... > >On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: > >> In that case, use a MikroTik RB411R. >> Integrated radio, and MT can do various encryptions you need. >> >> Sorry, I overlooked that part of the request. >> >> On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: >> >> > Bullet M2's won't do WEP until the release of firmware version 5.1 which >> > has been "in just a couple of weeks" for at least the last two months. >> > >> > >> > >> > Jayson Baker wrote: >> > > UBNT Bullet M2? >> > > >> > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: >> > > >> > > >> > >> I have one small group on an old Cisco Aironet 350, which only does >> > >> 802.11b. >> > >> >> > >> 1) I want to have at least a b/g mix, n capable a bonus. >> > >> >> > >> 2) Must support WEP encryption, but be able to handle a mix of WEP >> and >> > >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >> > >> >> > >> 3) Must play nice with Tranzeo CPQ and CPE200. >> > >> >> > >> You input is helpful. >> > >> >> > >> TIA, >> > >> >> > >> Pat >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> WISPA Wants You! Join today! >> > >> http://signup.wispa.org/ >> > >> >> > >> >> > >> >> > >> >> > >> WISPA Wireless List: wireless@wispa.org >> > >> >> > >> Subscribe/Unsubscribe: >> > >> http://lists.wispa.org/mailman/listinfo/wireless >> > >> >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> >> > >> >> > > >> > > >> > > >> > >> >> > > WISPA Wants You! Join today! >> > > http://signup.wispa.org/ >> > > >> > >> >> > > >> > > WISPA Wireless List: wireless@wispa.org >> > > >> > > Subscribe/Unsubscribe: >> > > http://lists.wispa.org/mailman/listinfo/wireless >> > > >> > > Archives: http://lists.wispa.org/pipermail/wireless/ >> > > >> > > >> > > >> > >> > >> > >> > >> > >> >> > WISPA Wants You! Join today! >> > http://signup.wispa.org/ >> > >> > >> >> > >> > WISPA Wireless List: wireless@wispa.org >> > >> > Subscribe/Unsubscribe: >> > http://lists.wispa.org/mailman/listinfo/wireless >> > >> > Archives: http://lists.wispa.org/pipermail/wireless/ >> > >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > >WISPA Wants You! Join today! >http://signup.wispa.org/ > > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ >--- >[This E-mail scanned for viruses by Declude Virus] > > Wireless High Speed Broadband service from Info-Ed, Inc. as low as $30.00/mth. Check out www.info-ed.com/wireless.html for information. WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Deliberant would work well for this I believe. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of pat Sent: Thursday, November 19, 2009 3:59 PM To: WISPA General List Subject: [WISPA] Need a new AP I have one small group on an old Cisco Aironet 350, which only does 802.11b. 1) I want to have at least a b/g mix, n capable a bonus. 2) Must support WEP encryption, but be able to handle a mix of WEP and WPA simultaneously. (WEP for legacy clients that I haven't upgraded) 3) Must play nice with Tranzeo CPQ and CPE200. You input is helpful. TIA, Pat WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Cisco 1200 series will plug right in John AJ wrote: > Hahaha Gmail ads came up with this firmware as I was reading this thread: > > http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php > > chop > *Adds 802.11-compatible encryption modes > *The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware > adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. > /chop > > > Pretty spendy for just a single unit... > > On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: > > >> In that case, use a MikroTik RB411R. >> Integrated radio, and MT can do various encryptions you need. >> >> Sorry, I overlooked that part of the request. >> >> On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: >> >> >>> Bullet M2's won't do WEP until the release of firmware version 5.1 which >>> has been "in just a couple of weeks" for at least the last two months. >>> >>> >>> >>> Jayson Baker wrote: >>> UBNT Bullet M2? On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > I have one small group on an old Cisco Aironet 350, which only does > 802.11b. > > 1) I want to have at least a b/g mix, n capable a bonus. > > 2) Must support WEP encryption, but be able to handle a mix of WEP > >> and >> > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > 3) Must play nice with Tranzeo CPQ and CPE200. > > You input is helpful. > > TIA, > > Pat > > > > > > >> >> > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > >> >> > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > >> >> WISPA Wants You! Join today! http://signup.wispa.org/ >> >> WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >> >> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> >> >> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Nice! Let us know how you like it. On Thu, Nov 19, 2009 at 5:21 PM, AJ wrote: > Hahaha Gmail ads came up with this firmware as I was reading this thread: > > http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php > > chop > *Adds 802.11-compatible encryption modes > *The stock Ubiquiti firmware only supports WPA-AES encryption. Our > firmware > adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. > /chop > > > Pretty spendy for just a single unit... > > On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker >wrote: > > > In that case, use a MikroTik RB411R. > > Integrated radio, and MT can do various encryptions you need. > > > > Sorry, I overlooked that part of the request. > > > > On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: > > > > > Bullet M2's won't do WEP until the release of firmware version 5.1 > which > > > has been "in just a couple of weeks" for at least the last two months. > > > > > > > > > > > > Jayson Baker wrote: > > > > UBNT Bullet M2? > > > > > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > > > > > > > >> I have one small group on an old Cisco Aironet 350, which only does > > > >> 802.11b. > > > >> > > > >> 1) I want to have at least a b/g mix, n capable a bonus. > > > >> > > > >> 2) Must support WEP encryption, but be able to handle a mix of WEP > > and > > > >> WPA simultaneously. (WEP for legacy clients that I haven't > upgraded) > > > >> > > > >> 3) Must play nice with Tranzeo CPQ and CPE200. > > > >> > > > >> You input is helpful. > > > >> > > > >> TIA, > > > >> > > > >> Pat > > > >> > > > >> > > > >> > > > >> > > > >> > > > > > > > > > >> WISPA Wants You! Join today! > > > >> http://signup.wispa.org/ > > > >> > > > >> > > > > > > > > > >> > > > >> WISPA Wireless List: wireless@wispa.org > > > >> > > > >> Subscribe/Unsubscribe: > > > >> http://lists.wispa.org/mailman/listinfo/wireless > > > >> > > > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > >> > > > >> > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > > > Subscribe/Unsubscribe: > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Some old Palm devices. Recently a Dell pre 2003 that you couldn't even update. No new stuff, but there are still a lot of wep only devices out there. At 05:58 PM 11/19/2009, you wrote: >What "devices" don't do WPA in today's world? > >Josh Luthman >Office: 937-552-2340 >Direct: 937-552-2343 >1100 Wayne St >Suite 1337 >Troy, OH 45373 > >"The secret to creativity is knowing how to hide your sources." >--- Albert Einstein > > >On Thu, Nov 19, 2009 at 6:19 PM, Mike wrote: > > > Most Atheros radios I've seen can have an AP and a "virtual AP." I > > have one set up in my office. One SSID leads to WEP encryption and > > different router rules. The other is WPA, virtual, and privileged; > > for full network access. Some of our "devices" don't do wpa nicely. > > > > Mike > > > > At 04:12 PM 11/19/2009, you wrote: > > >WEP and WPA at the same time? Haven't seen that anywhere myself. > > > > > >Who cares about the waste of effort protocol though? > > > > > >Josh Luthman > > >Office: 937-552-2340 > > >Direct: 937-552-2343 > > >1100 Wayne St > > >Suite 1337 > > >Troy, OH 45373 > > > > > >"The secret to creativity is knowing how to hide your sources." > > >--- Albert Einstein > > > > > > > > >On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker > >wrote: > > > > > > > UBNT Bullet M2? > > > > > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > > > > > I have one small group on an old Cisco Aironet 350, which only does > > > > > 802.11b. > > > > > > > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > > > > > > > 2) Must support WEP encryption, but be able to handle a mix of WEP > > and > > > > > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > > > > > > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > > > > > > > You input is helpful. > > > > > > > > > > TIA, > > > > > > > > > > Pat > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > > > > > Subscribe/Unsubscribe: > > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > > > Subscribe/Unsubscribe: > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > >- > --- > > >WISPA Wants You! Join today! > > >http://signup.wispa.org/ > > > > >- > --- > > > > > >WISPA Wireless List: wireless@wispa.org > > > > > >Subscribe/Unsubscribe: > > >http://lists.wispa.org/mailman/listinfo/wireless > > > > > >Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > >WISPA Wants You! Join today! >http://signup.wispa.org/ > > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Old ones. . . . J o n a t h a n -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, November 19, 2009 5:58 PM To: WISPA General List Subject: Re: [WISPA] Need a new AP What "devices" don't do WPA in today's world? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein On Thu, Nov 19, 2009 at 6:19 PM, Mike wrote: > Most Atheros radios I've seen can have an AP and a "virtual AP." I > have one set up in my office. One SSID leads to WEP encryption and > different router rules. The other is WPA, virtual, and privileged; > for full network access. Some of our "devices" don't do wpa nicely. > > Mike > > At 04:12 PM 11/19/2009, you wrote: > >WEP and WPA at the same time? Haven't seen that anywhere myself. > > > >Who cares about the waste of effort protocol though? > > > >Josh Luthman > >Office: 937-552-2340 > >Direct: 937-552-2343 > >1100 Wayne St > >Suite 1337 > >Troy, OH 45373 > > > >"The secret to creativity is knowing how to hide your sources." > >--- Albert Einstein > > > > > >On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker >wrote: > > > > > UBNT Bullet M2? > > > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > > > I have one small group on an old Cisco Aironet 350, which only > > > > does 802.11b. > > > > > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > > > > > 2) Must support WEP encryption, but be able to handle a mix of > > > > WEP > and > > > > WPA simultaneously. (WEP for legacy clients that I haven't > > > > upgraded) > > > > > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > > > > > You input is helpful. > > > > > > > > TIA, > > > > > > > > Pat > > > > > > > > > > > > > > > > > > > > > > > > > > -- > -- > > > > WISPA Wants You! Join today! > > > > http://signup.wispa.org/ > > > > > > > > > > > > > > -- > -- > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > > > Subscribe/Unsubscribe: > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > -- > -- > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > -- > -- > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > >- > >--- > >WISPA Wants You! Join today! > >http://signup.wispa.org/ > > >- > >--- > > > >WISPA Wireless List: wireless@wispa.org > > > >Subscribe/Unsubscribe: > >http://lists.wispa.org/mailman/listinfo/wireless > > > >Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -- > -- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -- > -- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- -- WISPA Wants You! Join today! http://signup.wispa.org/ -- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
What "devices" don't do WPA in today's world? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein On Thu, Nov 19, 2009 at 6:19 PM, Mike wrote: > Most Atheros radios I've seen can have an AP and a "virtual AP." I > have one set up in my office. One SSID leads to WEP encryption and > different router rules. The other is WPA, virtual, and privileged; > for full network access. Some of our "devices" don't do wpa nicely. > > Mike > > At 04:12 PM 11/19/2009, you wrote: > >WEP and WPA at the same time? Haven't seen that anywhere myself. > > > >Who cares about the waste of effort protocol though? > > > >Josh Luthman > >Office: 937-552-2340 > >Direct: 937-552-2343 > >1100 Wayne St > >Suite 1337 > >Troy, OH 45373 > > > >"The secret to creativity is knowing how to hide your sources." > >--- Albert Einstein > > > > > >On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker >wrote: > > > > > UBNT Bullet M2? > > > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > > > I have one small group on an old Cisco Aironet 350, which only does > > > > 802.11b. > > > > > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > > > > > 2) Must support WEP encryption, but be able to handle a mix of WEP > and > > > > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > > > > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > > > > > You input is helpful. > > > > > > > > TIA, > > > > > > > > Pat > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > > > Subscribe/Unsubscribe: > > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > >WISPA Wants You! Join today! > >http://signup.wispa.org/ > > > > > > >WISPA Wireless List: wireless@wispa.org > > > >Subscribe/Unsubscribe: > >http://lists.wispa.org/mailman/listinfo/wireless > > > >Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Most Atheros radios I've seen can have an AP and a "virtual AP." I have one set up in my office. One SSID leads to WEP encryption and different router rules. The other is WPA, virtual, and privileged; for full network access. Some of our "devices" don't do wpa nicely. Mike At 04:12 PM 11/19/2009, you wrote: >WEP and WPA at the same time? Haven't seen that anywhere myself. > >Who cares about the waste of effort protocol though? > >Josh Luthman >Office: 937-552-2340 >Direct: 937-552-2343 >1100 Wayne St >Suite 1337 >Troy, OH 45373 > >"The secret to creativity is knowing how to hide your sources." >--- Albert Einstein > > >On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker wrote: > > > UBNT Bullet M2? > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > I have one small group on an old Cisco Aironet 350, which only does > > > 802.11b. > > > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > > > 2) Must support WEP encryption, but be able to handle a mix of WEP and > > > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > > > You input is helpful. > > > > > > TIA, > > > > > > Pat > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > >WISPA Wants You! Join today! >http://signup.wispa.org/ > > >WISPA Wireless List: wireless@wispa.org > >Subscribe/Unsubscribe: >http://lists.wispa.org/mailman/listinfo/wireless > >Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Wow do I feel dumb. I am doing this myself at home. Primary wireless interface - WEP Virtual AP on said interface - WPA I do different SSIDs, not sure how clients would react if they were the same. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein On Thu, Nov 19, 2009 at 5:45 PM, Dennis Burgess wrote: > MT > > --- > Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer > WISPA Board Member - wispa.org > Link Technologies, Inc -- Mikrotik & WISP Support Services > WISPA Vendor Member > Office: 314-735-0270 Website: http://www.linktechs.net > LIVE On-Line Mikrotik Training > Author of "Learn RouterOS" > > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Josh Luthman > Sent: Thursday, November 19, 2009 4:13 PM > To: WISPA General List > Subject: Re: [WISPA] Need a new AP > > WEP and WPA at the same time? Haven't seen that anywhere myself. > > Who cares about the waste of effort protocol though? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "The secret to creativity is knowing how to hide your sources." > --- Albert Einstein > > > On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker > wrote: > > > UBNT Bullet M2? > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > I have one small group on an old Cisco Aironet 350, which only does > > > 802.11b. > > > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > > > 2) Must support WEP encryption, but be able to handle a mix of WEP > and > > > WPA simultaneously. (WEP for legacy clients that I haven't > upgraded) > > > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > > > You input is helpful. > > > > > > TIA, > > > > > > Pat > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
MT --- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member Office: 314-735-0270 Website: http://www.linktechs.net LIVE On-Line Mikrotik Training Author of "Learn RouterOS" -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Thursday, November 19, 2009 4:13 PM To: WISPA General List Subject: Re: [WISPA] Need a new AP WEP and WPA at the same time? Haven't seen that anywhere myself. Who cares about the waste of effort protocol though? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker wrote: > UBNT Bullet M2? > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > I have one small group on an old Cisco Aironet 350, which only does > > 802.11b. > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > 2) Must support WEP encryption, but be able to handle a mix of WEP and > > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > You input is helpful. > > > > TIA, > > > > Pat > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Ah I didn't catch the WEP part. Sucks you can't get away from that. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of pat Sent: Thursday, November 19, 2009 5:17 PM To: WISPA General List Subject: Re: [WISPA] Need a new AP Bullet M2's won't do WEP until the release of firmware version 5.1 which has been "in just a couple of weeks" for at least the last two months. Jayson Baker wrote: > UBNT Bullet M2? > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > >> I have one small group on an old Cisco Aironet 350, which only does >> 802.11b. >> >> 1) I want to have at least a b/g mix, n capable a bonus. >> >> 2) Must support WEP encryption, but be able to handle a mix of WEP and >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >> >> 3) Must play nice with Tranzeo CPQ and CPE200. >> >> You input is helpful. >> >> TIA, >> >> Pat >> >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
It was promised at the end of November, beta should be out this week. Regards Michael Baird > Bullet M2's won't do WEP until the release of firmware version 5.1 which > has been "in just a couple of weeks" for at least the last two months. > > > > Jayson Baker wrote: > >> UBNT Bullet M2? >> >> On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: >> >> >> >>> I have one small group on an old Cisco Aironet 350, which only does >>> 802.11b. >>> >>> 1) I want to have at least a b/g mix, n capable a bonus. >>> >>> 2) Must support WEP encryption, but be able to handle a mix of WEP and >>> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >>> >>> 3) Must play nice with Tranzeo CPQ and CPE200. >>> >>> You input is helpful. >>> >>> TIA, >>> >>> Pat >>> >>> >>> >>> >>> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Thanks George. I follow DSLR but missed that one. George Morris wrote: > Mike put up a bit of info about what's on the way in 5.1 on DSLR. Appears we > are getting close to seeing a beta. > > ""Features that are in 5.1: > > - DynamicACK is rewritten with many improvements. > > - Full 802.11abg support > > - Full Encryption support (WEP, WPA/WPA2 AES/TKIP ect) > > - ACK Removal for Point to Point links > > - AutoRate selection Algorithm is rewritten. > > - New Web server for the software > > and a lot more. > > The Beta should be on the forum tommorow and the best part is the software > will be free. > > Mike"" > > George > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of AJ > Sent: Thursday, November 19, 2009 5:21 PM > To: WISPA General List > Subject: Re: [WISPA] Need a new AP > > Hahaha Gmail ads came up with this firmware as I was reading this thread: > > http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php > > chop > *Adds 802.11-compatible encryption modes > *The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware > adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. > /chop > > > Pretty spendy for just a single unit... > > On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: > > >> In that case, use a MikroTik RB411R. >> Integrated radio, and MT can do various encryptions you need. >> >> Sorry, I overlooked that part of the request. >> >> On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: >> >> >>> Bullet M2's won't do WEP until the release of firmware version 5.1 which >>> has been "in just a couple of weeks" for at least the last two months. >>> >>> >>> >>> Jayson Baker wrote: >>> >>>> UBNT Bullet M2? >>>> >>>> On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: >>>> >>>> >>>> >>>>> I have one small group on an old Cisco Aironet 350, which only does >>>>> 802.11b. >>>>> >>>>> 1) I want to have at least a b/g mix, n capable a bonus. >>>>> >>>>> 2) Must support WEP encryption, but be able to handle a mix of WEP >>>>> >> and >> >>>>> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >>>>> >>>>> 3) Must play nice with Tranzeo CPQ and CPE200. >>>>> >>>>> You input is helpful. >>>>> >>>>> TIA, >>>>> >>>>> Pat >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> > > > >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> >>>>> >>>>> > > > >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>>> >>>>> >>>> >>>> > > > >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> >>>> > > > >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> >>>> >>> >>> >>> >>> > > > >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> > > > >>> WISPA Wireless List: wireless@wispa.org >>> >>
Re: [WISPA] Need a new AP
Mike put up a bit of info about what's on the way in 5.1 on DSLR. Appears we are getting close to seeing a beta. ""Features that are in 5.1: - DynamicACK is rewritten with many improvements. - Full 802.11abg support - Full Encryption support (WEP, WPA/WPA2 AES/TKIP ect) - ACK Removal for Point to Point links - AutoRate selection Algorithm is rewritten. - New Web server for the software and a lot more. The Beta should be on the forum tommorow and the best part is the software will be free. Mike"" George -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of AJ Sent: Thursday, November 19, 2009 5:21 PM To: WISPA General List Subject: Re: [WISPA] Need a new AP Hahaha Gmail ads came up with this firmware as I was reading this thread: http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php chop *Adds 802.11-compatible encryption modes *The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. /chop Pretty spendy for just a single unit... On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: > In that case, use a MikroTik RB411R. > Integrated radio, and MT can do various encryptions you need. > > Sorry, I overlooked that part of the request. > > On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: > > > Bullet M2's won't do WEP until the release of firmware version 5.1 which > > has been "in just a couple of weeks" for at least the last two months. > > > > > > > > Jayson Baker wrote: > > > UBNT Bullet M2? > > > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > > > > >> I have one small group on an old Cisco Aironet 350, which only does > > >> 802.11b. > > >> > > >> 1) I want to have at least a b/g mix, n capable a bonus. > > >> > > >> 2) Must support WEP encryption, but be able to handle a mix of WEP > and > > >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > >> > > >> 3) Must play nice with Tranzeo CPQ and CPE200. > > >> > > >> You input is helpful. > > >> > > >> TIA, > > >> > > >> Pat > > >> > > >> > > >> > > >> > > >> > > > > > >> WISPA Wants You! Join today! > > >> http://signup.wispa.org/ > > >> > > >> > > > > > >> > > >> WISPA Wireless List: wireless@wispa.org > > >> > > >> Subscribe/Unsubscribe: > > >> http://lists.wispa.org/mailman/listinfo/wireless > > >> > > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > >> > > >> > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
I have 3 AP's with Cisco Aironet 1250's that handle both WEP and WPA at the same time, and do it very well. Josh Luthman wrote: > WEP and WPA at the same time? Haven't seen that anywhere myself. > > Who cares about the waste of effort protocol though? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > "The secret to creativity is knowing how to hide your sources." > --- Albert Einstein > > > On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker wrote: > > >> UBNT Bullet M2? >> >> On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: >> >> >>> I have one small group on an old Cisco Aironet 350, which only does >>> 802.11b. >>> >>> 1) I want to have at least a b/g mix, n capable a bonus. >>> >>> 2) Must support WEP encryption, but be able to handle a mix of WEP and >>> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >>> >>> 3) Must play nice with Tranzeo CPQ and CPE200. >>> >>> You input is helpful. >>> >>> TIA, >>> >>> Pat >>> >>> >>> >>> >>> >>> >> >> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> >> >> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Hahaha Gmail ads came up with this firmware as I was reading this thread: http://www.fireserve.com/products/ubiquiti/bullet-m-firmware.php chop *Adds 802.11-compatible encryption modes *The stock Ubiquiti firmware only supports WPA-AES encryption. Our firmware adds support for 64-bit and 128-bit WEP, WPA-TKIP and WPA2-TKIP. /chop Pretty spendy for just a single unit... On Thu, Nov 19, 2009 at 3:17 PM, Jayson Baker wrote: > In that case, use a MikroTik RB411R. > Integrated radio, and MT can do various encryptions you need. > > Sorry, I overlooked that part of the request. > > On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: > > > Bullet M2's won't do WEP until the release of firmware version 5.1 which > > has been "in just a couple of weeks" for at least the last two months. > > > > > > > > Jayson Baker wrote: > > > UBNT Bullet M2? > > > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > > > > >> I have one small group on an old Cisco Aironet 350, which only does > > >> 802.11b. > > >> > > >> 1) I want to have at least a b/g mix, n capable a bonus. > > >> > > >> 2) Must support WEP encryption, but be able to handle a mix of WEP > and > > >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > >> > > >> 3) Must play nice with Tranzeo CPQ and CPE200. > > >> > > >> You input is helpful. > > >> > > >> TIA, > > >> > > >> Pat > > >> > > >> > > >> > > >> > > >> > > > > > >> WISPA Wants You! Join today! > > >> http://signup.wispa.org/ > > >> > > >> > > > > > >> > > >> WISPA Wireless List: wireless@wispa.org > > >> > > >> Subscribe/Unsubscribe: > > >> http://lists.wispa.org/mailman/listinfo/wireless > > >> > > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > >> > > >> > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > > http://signup.wispa.org/ > > > > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > > > Subscribe/Unsubscribe: > > > http://lists.wispa.org/mailman/listinfo/wireless > > > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
In that case, use a MikroTik RB411R. Integrated radio, and MT can do various encryptions you need. Sorry, I overlooked that part of the request. On Thu, Nov 19, 2009 at 3:16 PM, pat wrote: > Bullet M2's won't do WEP until the release of firmware version 5.1 which > has been "in just a couple of weeks" for at least the last two months. > > > > Jayson Baker wrote: > > UBNT Bullet M2? > > > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > > > >> I have one small group on an old Cisco Aironet 350, which only does > >> 802.11b. > >> > >> 1) I want to have at least a b/g mix, n capable a bonus. > >> > >> 2) Must support WEP encryption, but be able to handle a mix of WEP and > >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > >> > >> 3) Must play nice with Tranzeo CPQ and CPE200. > >> > >> You input is helpful. > >> > >> TIA, > >> > >> Pat > >> > >> > >> > >> > >> > > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> > >> > > >> > >> WISPA Wireless List: wireless@wispa.org > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > >> > >> > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
Bullet M2's won't do WEP until the release of firmware version 5.1 which has been "in just a couple of weeks" for at least the last two months. Jayson Baker wrote: > UBNT Bullet M2? > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > >> I have one small group on an old Cisco Aironet 350, which only does >> 802.11b. >> >> 1) I want to have at least a b/g mix, n capable a bonus. >> >> 2) Must support WEP encryption, but be able to handle a mix of WEP and >> WPA simultaneously. (WEP for legacy clients that I haven't upgraded) >> >> 3) Must play nice with Tranzeo CPQ and CPE200. >> >> You input is helpful. >> >> TIA, >> >> Pat >> >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
WEP and WPA at the same time? Haven't seen that anywhere myself. Who cares about the waste of effort protocol though? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 "The secret to creativity is knowing how to hide your sources." --- Albert Einstein On Thu, Nov 19, 2009 at 5:08 PM, Jayson Baker wrote: > UBNT Bullet M2? > > On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > > > I have one small group on an old Cisco Aironet 350, which only does > > 802.11b. > > > > 1) I want to have at least a b/g mix, n capable a bonus. > > > > 2) Must support WEP encryption, but be able to handle a mix of WEP and > > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > > > 3) Must play nice with Tranzeo CPQ and CPE200. > > > > You input is helpful. > > > > TIA, > > > > Pat > > > > > > > > > > > > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > > > > > > > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
I vote for that as well. Cheap and easy. -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jayson Baker Sent: Thursday, November 19, 2009 5:08 PM To: WISPA General List Subject: Re: [WISPA] Need a new AP UBNT Bullet M2? On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > I have one small group on an old Cisco Aironet 350, which only does > 802.11b. > > 1) I want to have at least a b/g mix, n capable a bonus. > > 2) Must support WEP encryption, but be able to handle a mix of WEP and > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > 3) Must play nice with Tranzeo CPQ and CPE200. > > You input is helpful. > > TIA, > > Pat > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Need a new AP
UBNT Bullet M2? On Thu, Nov 19, 2009 at 2:59 PM, pat wrote: > I have one small group on an old Cisco Aironet 350, which only does > 802.11b. > > 1) I want to have at least a b/g mix, n capable a bonus. > > 2) Must support WEP encryption, but be able to handle a mix of WEP and > WPA simultaneously. (WEP for legacy clients that I haven't upgraded) > > 3) Must play nice with Tranzeo CPQ and CPE200. > > You input is helpful. > > TIA, > > Pat > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Need a new AP
I have one small group on an old Cisco Aironet 350, which only does 802.11b. 1) I want to have at least a b/g mix, n capable a bonus. 2) Must support WEP encryption, but be able to handle a mix of WEP and WPA simultaneously. (WEP for legacy clients that I haven't upgraded) 3) Must play nice with Tranzeo CPQ and CPE200. You input is helpful. TIA, Pat WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
