RE: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-11-20 Thread Rios, Hector J 
Mathieu,

We continue to experience bug CSCvv78366. It is indeed cosmetic but it causes 
APs to spew a lot of syslog messages (~40 per second). I have not looked into 
CSCvv78719.

MR4 came out last month. We have not upgraded yet. If you look at the release 
notes there are some interesting caveats. One of the resolved caveats have to 
do with TWT. The resolution, you guessed it, disable TWT. So there seems to be 
a number of issues being caused by .11ax features.

Multiuser operation is very complex, and for clients to take advantage of it 
they first have to support it and then a lot of other conditions need to be in 
place for it to actually happen (e.g. spatial diversity). So disabling it right 
now should not cause a big impact, and should hopefully provide Cisco time to 
get their bugs fixed (in a timely manner).

BTW, sadly none of the bugs you listed appear in the MR4 release notes.

Best,

Hector Rios, Wireless Network Architect
The University of Texas at Austin | ITS



From: The EDUCAUSE Wireless Issues Community Group Listserv 
 On Behalf Of Mathieu Sturm
Sent: Friday, November 20, 2020 1:29 AM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hello everyone,

We’ve been having issues on 8.10.130.0 where a client could connect to a 
certain 2800/3800/9120 but didn’t have network access. Since the client was 
already connected they couldn’t roam to another AP.

We first thought it to be this bug: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv78366
Cisco thinks this is only cosmetic… so they now think we are facing this bug: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv78719%20/?rfs=iqvred

Their (temporary) solution is to

Step 1
Choose WLANs and click the WLAN ID.
Step 2
In the Advanced tab, check or uncheck the 11ac MU-MIMO check box.
Step 3
In the 802.11ax BSS Configuration section, check or uncheck the Down Link 
MU-MIMO and Up Link MU-MIMO  disable MU-MIMO on 802.11ax APs.

I’m not to keen on doing this. It makes our 2800/3800/9120’s pretty worthless.

We also saw these bugs:

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvk68674/?rfs=iqvred
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh04804/?rfs=iqvred

We are waiting for MR4 were hopefully these bugs will be gone (We can only hope 
)

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[cid:image001.png@01D6BF1C.DD313F30]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>




Van: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
Namens Phill Solomon
Verzonden: donderdag 1 oktober 2020 1:15
Aan: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 – seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures – while we 
have received no support calls – just wondering if anyone else has seen this?

Mathieu, thanks for the tip on the bug, now watching that too.

thanks

Phill Solomon
Senior Network Engineer
Deakin University, IS - AV & Networks,  ICT Infrastructure Services, eSolutions
• Phone: +61 3 924 46069

From: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
On Behalf Of Mathieu Sturm
Sent: Thursday, 24 September 2020 10:13 PM
To: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Little update, I came across this bug id: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu65125%2F%3Frfs%3Diqvred=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C8f16fa3f458248ddd86808d86596c4fd%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637371045528043511=oRxCC%2BNXXmwGOXEMbFpukuN2uMj9Xjg1%2FUgBzxIbH%2FE%3D=0>
 (thanks Jeff for the hint about version 8.10.139.43)

So I decided to change the settings on the SSID from WPA2 + WPA3 back to 
WPA+WPA2 and this seems to have resolved our issues (we’re testing right now).

My wife is about to deliver our 2nd daughter so I will ask my colleagues to 
update if possible.

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32

RE: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-11-20 Thread Gertjan Scharloo 
Hi Mathieu.

 

Thanks for this information !!

 

We currently use 8.5.161.6 and there are known (DHCP)  issues with AP2800 !

 

I will try to disable MU-MIMO and wait (again) for a fix….

 

Ps : #CSCvv78719 is a severity 2 bug !

 

Regards

 

ICT Services

Netwerkbeheer – draadloos

 

Gertjan Scharloo

ICT consultant

_

 

Universiteit van Amsterdam | Hogeschool van Amsterdam

 

Leeuwenburg | kamer A10.20

Weesperzijde 190 | 1097 DZ Amsterdam

Tel: +31(0)20 525 4885

Mobiel: +31(0) 61013-5880

 <http://www.uva.nl/> www.uva.nl

uva.nl/profile/g.scharloo

 <https://time.is/nl/CET> https://time.is/nl/CET 

 Je kunt mij ook bereiken via Skype for Business  of Teams  

 

Van: The EDUCAUSE Wireless Issues Community Group Listserv 
 Namens Mathieu Sturm
Verzonden: vrijdag 20 november 2020 08:29
Aan: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

 

Hello everyone,

 

We’ve been having issues on 8.10.130.0 where a client could connect to a 
certain 2800/3800/9120 but didn’t have network access. Since the client was 
already connected they couldn’t roam to another AP.

 

We first thought it to be this bug: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv78366 
<https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvv78366=04%7C01%7Cg.scharloo%40UVA.NL%7C39f321b7466f497a759208d88d25f8fc%7Ca0f1cacd618c4403b94576fb3d6874e5%7C1%7C1%7C637414541526384221%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=M8TS91ynS2Zp4jYdx3TysBuo2kCo8dWtNujS5RpWa00%3D=0>
  

Cisco thinks this is only cosmetic… so they now think we are facing this bug: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv78719%20/?rfs=iqvred 
<https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvv78719%2520%2F%3Frfs%3Diqvred=04%7C01%7Cg.scharloo%40UVA.NL%7C39f321b7466f497a759208d88d25f8fc%7Ca0f1cacd618c4403b94576fb3d6874e5%7C1%7C1%7C637414541526384221%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=gGQkCLkwvbFXGqvGYKE5o8JtlA33oPYnb4eX3F2i0Sw%3D=0>
 

 

Their (temporary) solution is to 

 


Step 1

Choose WLANs and click the WLAN ID. 


Step 2

In the Advanced tab, check or uncheck the 11ac MU-MIMO check box. 


Step 3

In the 802.11ax BSS Configuration section, check or uncheck the Down Link 
MU-MIMO and Up Link MU-MIMO  disable MU-MIMO on 802.11ax APs. 

 

I’m not to keen on doing this. It makes our 2800/3800/9120’s pretty worthless.

 

We also saw these bugs:

 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvk68674/?rfs=iqvred 
<https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvk68674%2F%3Frfs%3Diqvred=04%7C01%7Cg.scharloo%40UVA.NL%7C39f321b7466f497a759208d88d25f8fc%7Ca0f1cacd618c4403b94576fb3d6874e5%7C1%7C1%7C637414541526394177%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=9VEsboYv%2B9QKiOvAXER1bHTi7tAPQwXF1pumKwis1jw%3D=0>
 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh04804/?rfs=iqvred 
<https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvh04804%2F%3Frfs%3Diqvred=04%7C01%7Cg.scharloo%40UVA.NL%7C39f321b7466f497a759208d88d25f8fc%7Ca0f1cacd618c4403b94576fb3d6874e5%7C1%7C1%7C637414541526394177%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=RF88JfDWWDzW1mVlQKgjBfp8C276IBz8sF3B2VT6p40%3D=0>
 

 

We are waiting for MR4 were hopefully these bugs will be gone (We can only hope 
)

 

Regards,

 

 

Mathieu Sturm
Hoofdmedewerker Netwerkbeheer



Directie Financiën, Infrastructuur en IT

Afdeling Netwerkbeheer

Campus Schoonmeerssen - Gebouw B  Lokaal B0.75

Valentin Vaerwyckweg 1 - 9000 Gent

+32 9 243 35 23

 
<https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=04%7C01%7Cg.scharloo%40UVA.NL%7C39f321b7466f497a759208d88d25f8fc%7Ca0f1cacd618c4403b94576fb3d6874e5%7C1%7C1%7C637414541526404134%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000=WnHgSXd90IDTX2%2FcgbIHERPfF%2BaVDfPMc0RPZQA7myY%3D=0>
 www.hogent.be

 

 

 

 

Van: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> 
> Namens Phill Solomon
Verzonden: donderdag 1 oktober 2020 1:15
Aan: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU 
<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> 
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

 

We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 – seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures – while we 
have received no support calls – just wondering if anyone else has seen this?

 

Mathieu, thanks for the tip o

RE: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-11-19 Thread Mathieu Sturm 
Hello everyone,

We’ve been having issues on 8.10.130.0 where a client could connect to a 
certain 2800/3800/9120 but didn’t have network access. Since the client was 
already connected they couldn’t roam to another AP.

We first thought it to be this bug: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv78366
Cisco thinks this is only cosmetic… so they now think we are facing this bug: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvv78719%20/?rfs=iqvred

Their (temporary) solution is to

Step 1
Choose WLANs and click the WLAN ID.
Step 2
In the Advanced tab, check or uncheck the 11ac MU-MIMO check box.
Step 3
In the 802.11ax BSS Configuration section, check or uncheck the Down Link 
MU-MIMO and Up Link MU-MIMO  disable MU-MIMO on 802.11ax APs.

I’m not to keen on doing this. It makes our 2800/3800/9120’s pretty worthless.

We also saw these bugs:

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvk68674/?rfs=iqvred
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvh04804/?rfs=iqvred

We are waiting for MR4 were hopefully these bugs will be gone (We can only hope 
)

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>




Van: The EDUCAUSE Wireless Issues Community Group Listserv 
 Namens Phill Solomon
Verzonden: donderdag 1 oktober 2020 1:15
Aan: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 – seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures – while we 
have received no support calls – just wondering if anyone else has seen this?

Mathieu, thanks for the tip on the bug, now watching that too.

thanks

Phill Solomon
Senior Network Engineer
Deakin University, IS - AV & Networks,  ICT Infrastructure Services, eSolutions
• Phone: +61 3 924 46069

From: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
On Behalf Of Mathieu Sturm
Sent: Thursday, 24 September 2020 10:13 PM
To: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Little update, I came across this bug id: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu65125%2F%3Frfs%3Diqvred=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C8f16fa3f458248ddd86808d86596c4fd%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637371045528043511=oRxCC%2BNXXmwGOXEMbFpukuN2uMj9Xjg1%2FUgBzxIbH%2FE%3D=0>
 (thanks Jeff for the hint about version 8.10.139.43)

So I decided to change the settings on the SSID from WPA2 + WPA3 back to 
WPA+WPA2 and this seems to have resolved our issues (we’re testing right now).

My wife is about to deliver our 2nd daughter so I will ask my colleagues to 
update if possible.

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C8f16fa3f458248ddd86808d86596c4fd%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637371045528053512=uSvsKRztnJ9S70n420KbR622SG%2Bs1tDC8vngr2MjP2o%3D=0>



Van: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
Namens Tristan Gulyas
Verzonden: donderdag 24 september 2020 7:22
Aan: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hi,

Watching this thread closely.  We're currently on 8.5.151 but need to migrate 
to an 8.10 release for the 9130ax's.

If anyone has any TAC cases or bug IDs that may reference this issue, that 
would be super useful!

Tristan
--
TRISTAN GULYAS
Senior Network Engineer

Technology Services, eSolutions
Monash University
738 Blackburn Road
Clayton 3168
Australia

E: tristan.gul...@monash.edu<mailto:tristan.gul...@monash.edu>
monash.edu<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmonash.edu%2F=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C8f16fa3f458248ddd86808d86596c4fd%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637371045528063501=EYV0uFpBTg

Re: [EXTERNAL] Re: [WIRELESS-LAN] Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-10-01 Thread Mallon, Jason 
Mathieu,
Our Android is a little on the bare side.  Most of our mobile devices are iOS 
based, and they were still seeing the issue.  It was honestly pick and choose 
what would connect and what wouldn’t.  Sometimes trying for 9 or 10 times the 
device would suddenly connect.  This didn’t matter if it was eduroam or PSK.  
We have had good luck with adaptive Fast Transition across all devices.

I’m with you on 8.10MR4.  Not ready to start testing another controller code.

Thanks,
Jason Mallon | Network Engineer III
[/var/folders/h2/r448cc4j4_v70yns10brx6r0gq/T/com.microsoft.Outlook/Content.MSO/90F25235.tmp]
OIT
The University of Alabama
<https://www.ua.edu/>jemal...@ua.edu<mailto:jemal...@ua.edu>
[/var/folders/h2/r448cc4j4_v70yns10brx6r0gq/T/com.microsoft.Outlook/Content.MSO/8434B70B.tmp]

From: The EDUCAUSE Wireless Issues Community Group Listserv 

Date: Thursday, October 1, 2020 at 8:30 AM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU 
Subject: [EXTERNAL] Re: [WIRELESS-LAN] Re: [WIRELESS-LAN] Cisco 8.10.130.0 
eduroam issues
@Phil, I requested more information about that bug 
(https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu65125%2F%3Frfs%3Diqvred=02%7C01%7Cjemallon%40ua.edu%7C2e450bdee7f5410da76308d8660e0c24%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371558546973711=5Tyx74RSXK5oqa%2Fjlhxz2lgFE%2FycxV%2Bj%2F%2B4iMmBNrG0%3D=0>)
 and Cisco TAC send me this:

FT : disabled PMF : optional policy : wpa2 + wpa3 wpa2 : enabled wpa3 : enabled
Condition is this : When a user configures WPA2 PSK in pre WPA3 supported 
version and upgrades to WPA3 supported WLC version. The SAE password store is 
not configured during upgrade. This causes no passphrase to be sent to AP that 
causes no client connection

@Jason
On 8.10.121.0 we had issues with android devices that wouldn’t connect. 
Updating to 8.10.130.0 and changing Fast Transition to enable fixed this 
(https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu24770/<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu24770%2F=02%7C01%7Cjemallon%40ua.edu%7C2e450bdee7f5410da76308d8660e0c24%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371558546983707=snMiWoIKZSSAVKCdVWhcAS7I%2F2Wz8f%2FMlHL7aOntslQ%3D=0>).
 There is also this bug 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu67048 on 
8.10.121.0<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu67048%2520on%25208.10.121.0=02%7C01%7Cjemallon%40ua.edu%7C2e450bdee7f5410da76308d8660e0c24%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371558546983707=8zCfawFJn%2BRAVVHHFLXnaIlCg%2BsGGk0KF7%2BC2MA517g%3D=0>

Regarding 8.10.130.0 Our IT helpdesk has had their work on upgrading NIC’s. 
Most of our issue’s are solvable with updating the NIC or manually making a 
profile in W10. The eduroam cattool has helped a lot as well.

I  saw that there is a beta for 8.10MR4 but I’m not to keen to experiment with 
this.


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[cid:image002.png@01D697D0.A3C50C40]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cjemallon%40ua.edu%7C2e450bdee7f5410da76308d8660e0c24%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371558546993704=G7TpXCegeyjLyN5iPXusBPjfijBNeHHFQDlPw6Q5tNg%3D=0>




Van: The EDUCAUSE Wireless Issues Community Group Listserv 
 Namens Mallon, Jason
Verzonden: donderdag 1 oktober 2020 2:17
Aan: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Onderwerp: Re: [WIRELESS-LAN] [EXTERNAL] Re: [WIRELESS-LAN] Cisco 8.10.130.0 
eduroam issues

We saw this all the way through 8.10.121 and actually thought the radius 
servers/NAC were causing an issue.  We had multiple TAC cases opened, before 
Cisco finally recommended we move to 8.10.130.  Upgrading code solved a lot of 
our issues.  There are still a handful of devices that have issues, and we have 
been working on getting them to upgrade their drivers.
Jason Mallon
Network Engineer, OIT
The University of Alabama
jemal...@ua.edu<mailto:jemal...@ua.edu>

On Sep 30, 2020 18:16, Phill Solomon 
<0150915d379b-dmarc-requ...@listserv.educause.edu<mailto:0150915d379b-dmarc-requ...@listserv.educause.edu>>
 wrote:
We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 – seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures – while we 
have received no support calls – just wondering if anyone else has seen this?

Mathieu, thanks for the tip on the bug, now watching that too.

thanks

Phill Solomon
Senior Network Engineer
Deakin University, IS - AV & Networks,  ICT Infrastr

RE: [EXTERNAL] Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-10-01 Thread Mathieu Sturm 
@Phil, I requested more information about that bug 
(https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred) and 
Cisco TAC send me this:

FT : disabled PMF : optional policy : wpa2 + wpa3 wpa2 : enabled wpa3 : enabled
Condition is this : When a user configures WPA2 PSK in pre WPA3 supported 
version and upgrades to WPA3 supported WLC version. The SAE password store is 
not configured during upgrade. This causes no passphrase to be sent to AP that 
causes no client connection

@Jason
On 8.10.121.0 we had issues with android devices that wouldn't connect. 
Updating to 8.10.130.0 and changing Fast Transition to enable fixed this 
(https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu24770/). There is also this 
bug https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu67048 on 
8.10.121.0<https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu67048%20on%208.10.121.0>

Regarding 8.10.130.0 Our IT helpdesk has had their work on upgrading NIC's. 
Most of our issue's are solvable with updating the NIC or manually making a 
profile in W10. The eduroam cattool has helped a lot as well.

I  saw that there is a beta for 8.10MR4 but I'm not to keen to experiment with 
this.


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>




Van: The EDUCAUSE Wireless Issues Community Group Listserv 
 Namens Mallon, Jason
Verzonden: donderdag 1 oktober 2020 2:17
Aan: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Onderwerp: Re: [WIRELESS-LAN] [EXTERNAL] Re: [WIRELESS-LAN] Cisco 8.10.130.0 
eduroam issues

We saw this all the way through 8.10.121 and actually thought the radius 
servers/NAC were causing an issue.  We had multiple TAC cases opened, before 
Cisco finally recommended we move to 8.10.130.  Upgrading code solved a lot of 
our issues.  There are still a handful of devices that have issues, and we have 
been working on getting them to upgrade their drivers.
Jason Mallon
Network Engineer, OIT
The University of Alabama
jemal...@ua.edu<mailto:jemal...@ua.edu>

On Sep 30, 2020 18:16, Phill Solomon 
<0150915d379b-dmarc-requ...@listserv.educause.edu<mailto:0150915d379b-dmarc-requ...@listserv.educause.edu>>
 wrote:
We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 - seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures - while we 
have received no support calls - just wondering if anyone else has seen this?

Mathieu, thanks for the tip on the bug, now watching that too.

thanks

Phill Solomon
Senior Network Engineer
Deakin University, IS - AV & Networks,  ICT Infrastructure Services, eSolutions
* Phone: +61 3 924 46069

From: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
On Behalf Of Mathieu Sturm
Sent: Thursday, 24 September 2020 10:13 PM
To: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Little update, I came across this bug id: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu65125%2F%3Frfs%3Diqvred=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7Cf6c43d3d3288475ca4f408d8659f58fe%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637371082380355154=5PInUNtudOzIrnYGuvgUsXRqiJufvy4eTkJPNbM69y8%3D=0>
 (thanks Jeff for the hint about version 8.10.139.43)

So I decided to change the settings on the SSID from WPA2 + WPA3 back to 
WPA+WPA2 and this seems to have resolved our issues (we're testing right now).

My wife is about to deliver our 2nd daughter so I will ask my colleagues to 
update if possible.

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7Cf6c43d3d3288475ca4f408d8659f58fe%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637371082380355154=0vjE8cIeVRoxAd4DYM4wPLykPVvkXjaf6pUQxXppx2s%3D=0>



Van: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
Namens Tristan Gulyas
Verzonden: donderdag 24 september 2020 7:22
Aan: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRE

Re: [EXTERNAL] Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-09-30 Thread Mallon, Jason 
We saw this all the way through 8.10.121 and actually thought the radius 
servers/NAC were causing an issue.  We had multiple TAC cases opened, before 
Cisco finally recommended we move to 8.10.130.  Upgrading code solved a lot of 
our issues.  There are still a handful of devices that have issues, and we have 
been working on getting them to upgrade their drivers.

Jason Mallon
Network Engineer, OIT
The University of Alabama
jemal...@ua.edu

On Sep 30, 2020 18:16, Phill Solomon 
<0150915d379b-dmarc-requ...@listserv.educause.edu> wrote:
We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 – seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures – while we 
have received no support calls – just wondering if anyone else has seen this?

Mathieu, thanks for the tip on the bug, now watching that too.

thanks

Phill Solomon
Senior Network Engineer
Deakin University, IS - AV & Networks,  ICT Infrastructure Services, eSolutions
• Phone: +61 3 924 46069

From: The EDUCAUSE Wireless Issues Community Group Listserv 
 On Behalf Of Mathieu Sturm
Sent: Thursday, 24 September 2020 10:13 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Little update, I came across this bug id: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbst.cloudapps.cisco.com%2Fbugsearch%2Fbug%2FCSCvu65125%2F%3Frfs%3Diqvred=02%7C01%7Cjemallon%40ua.edu%7C86e2dc14995940cbe42a08d86596c67c%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371045953601303=e8CBfSC49YOVyGwjqnDsZYSHVcYoIIrFzheEQxGnHN0%3D=0>
 (thanks Jeff for the hint about version 8.10.139.43)

So I decided to change the settings on the SSID from WPA2 + WPA3 back to 
WPA+WPA2 and this seems to have resolved our issues (we’re testing right now).

My wife is about to deliver our 2nd daughter so I will ask my colleagues to 
update if possible.

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cjemallon%40ua.edu%7C86e2dc14995940cbe42a08d86596c67c%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371045953611295=PqiTzozQCVE2uTRxUnHLeqSxGzYO5WmKHdP1h%2B7gQo0%3D=0>



Van: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
Namens Tristan Gulyas
Verzonden: donderdag 24 september 2020 7:22
Aan: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hi,

Watching this thread closely.  We're currently on 8.5.151 but need to migrate 
to an 8.10 release for the 9130ax's.

If anyone has any TAC cases or bug IDs that may reference this issue, that 
would be super useful!

Tristan
--
TRISTAN GULYAS
Senior Network Engineer

Technology Services, eSolutions
Monash University
738 Blackburn Road
Clayton 3168
Australia

E: tristan.gul...@monash.edu<mailto:tristan.gul...@monash.edu>
monash.edu<https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmonash.edu%2F=02%7C01%7Cjemallon%40ua.edu%7C86e2dc14995940cbe42a08d86596c67c%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371045953611295=v5fgO32DJo3mxJk8KS7JXpwDyTj80QopxQoX03arwHY%3D=0>

On 24 Sep 2020, at 2:23 am, Jeffrey D. Sessler 
mailto:j...@scrippscollege.edu>> wrote:

You probably want 8.10.139.43, which is fully BU supported and suggested for 
production. This is a link to the release notes, I’d check to see if any of 
these apply. Also, verify your timeouts aren’t set too low for the radius 
responses coming from eduroam.  I ran into this at Cal Poly in Pomona, where I 
could not interactively login to eduroam, but I could save my credentials and 
it worked just fine.  I suspected a timeout set too low (this was Aruba 
equipment however). Had an entire group there for a meeting that faced the same 
issues.

https://www.cisco.com/web/software/280926587/153915/Release_Notes_8_10_139_43.pdf<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.cisco.com%2Fweb%2Fsoftware%2F280926587%2F153915%2FRelease_Notes_8_10_139_43.pdf=02%7C01%7Cjemallon%40ua.edu%7C86e2dc14995940cbe42a08d86596c67c%7C2a00728ef0d040b4a4e8ce433f3fbca7%7C0%7C0%7C637371045953621290=j3UyeJI7xIb%2BthWiOLS1vwd%2FYTXE7oH%2Bkr9lGaV0wiM%3D=0>

Jeff


From: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
On Behalf Of Mathieu Sturm
Sent: Wednesday, September 23, 2020 3:07 AM
To: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hello,

We

RE: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-09-30 Thread Phill Solomon 
We have upgrade 2/3 WLC pairs from 8.5.151 to 8.10.103.0 – seems to be going ok 
with the exception of DNAC-C reporting slower / more DHCP failures – while we 
have received no support calls – just wondering if anyone else has seen this?

Mathieu, thanks for the tip on the bug, now watching that too.

thanks

Phill Solomon
Senior Network Engineer
Deakin University, IS - AV & Networks,  ICT Infrastructure Services, eSolutions
• Phone: +61 3 924 46069

From: The EDUCAUSE Wireless Issues Community Group Listserv 
 On Behalf Of Mathieu Sturm
Sent: Thursday, 24 September 2020 10:13 PM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Little update, I came across this bug id: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred (thanks 
Jeff for the hint about version 8.10.139.43)

So I decided to change the settings on the SSID from WPA2 + WPA3 back to 
WPA+WPA2 and this seems to have resolved our issues (we’re testing right now).

My wife is about to deliver our 2nd daughter so I will ask my colleagues to 
update if possible.

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>



Van: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
Namens Tristan Gulyas
Verzonden: donderdag 24 september 2020 7:22
Aan: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hi,

Watching this thread closely.  We're currently on 8.5.151 but need to migrate 
to an 8.10 release for the 9130ax's.

If anyone has any TAC cases or bug IDs that may reference this issue, that 
would be super useful!

Tristan
--
TRISTAN GULYAS
Senior Network Engineer

Technology Services, eSolutions
Monash University
738 Blackburn Road
Clayton 3168
Australia

E: tristan.gul...@monash.edu<mailto:tristan.gul...@monash.edu>
monash.edu<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmonash.edu%2F=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C6078e49e647e41bd416c08d86049bbde%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637365217102685605=6Regh9vt9RkykD0R6GjrxBMAUVcdXFI6hdBCfXGOazU%3D=0>

On 24 Sep 2020, at 2:23 am, Jeffrey D. Sessler 
mailto:j...@scrippscollege.edu>> wrote:

You probably want 8.10.139.43, which is fully BU supported and suggested for 
production. This is a link to the release notes, I’d check to see if any of 
these apply. Also, verify your timeouts aren’t set too low for the radius 
responses coming from eduroam.  I ran into this at Cal Poly in Pomona, where I 
could not interactively login to eduroam, but I could save my credentials and 
it worked just fine.  I suspected a timeout set too low (this was Aruba 
equipment however). Had an entire group there for a meeting that faced the same 
issues.

https://www.cisco.com/web/software/280926587/153915/Release_Notes_8_10_139_43.pdf<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.cisco.com%2Fweb%2Fsoftware%2F280926587%2F153915%2FRelease_Notes_8_10_139_43.pdf=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C6078e49e647e41bd416c08d86049bbde%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637365217102695599=lNJqE8txYPSQ%2B0e5dW8QBscMaH2K6QJXUP%2FgZi0vGRs%3D=0>

Jeff


From: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
On Behalf Of Mathieu Sturm
Sent: Wednesday, September 23, 2020 3:07 AM
To: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hello,

We updated our Cisco 5520 controllers from 8.5.151.0 to 8.10.130.0. Since the 
update we have issues with eduroam. Before the update the students and other 
users could select the ssid eduroam and fill in the credentials and they were 
connected.
Now we have to update the NIC’s (mostly AX200) to the latest version and/or 
update to W10 version 2004. And even then we often have to configure the SSID 
manually and save credentials.

We see that the users get to the ISE and are permitted but the WLC doesn’t 
always see this permit. Or the ISE gives a certificate warning (I’ve checked 
our certificates, all are valid).

Is anyone experiencing the same thing?

We went tot 8.10.130.0 for our new 9120’s.

Mathieu Sturm
Hoofdmedewerker Netwerkbeheer



Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaa

RE: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-09-24 Thread Mathieu Sturm 
Little update, I came across this bug id: 
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu65125/?rfs=iqvred (thanks 
Jeff for the hint about version 8.10.139.43)

So I decided to change the settings on the SSID from WPA2 + WPA3 back to 
WPA+WPA2 and this seems to have resolved our issues (we’re testing right now).

My wife is about to deliver our 2nd daughter so I will ask my colleagues to 
update if possible.

Regards,


Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>



Van: The EDUCAUSE Wireless Issues Community Group Listserv 
 Namens Tristan Gulyas
Verzonden: donderdag 24 september 2020 7:22
Aan: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Onderwerp: Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hi,

Watching this thread closely.  We're currently on 8.5.151 but need to migrate 
to an 8.10 release for the 9130ax's.

If anyone has any TAC cases or bug IDs that may reference this issue, that 
would be super useful!

Tristan
--
TRISTAN GULYAS
Senior Network Engineer

Technology Services, eSolutions
Monash University
738 Blackburn Road
Clayton 3168
Australia

E: tristan.gul...@monash.edu<mailto:tristan.gul...@monash.edu>
monash.edu<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmonash.edu%2F=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C6078e49e647e41bd416c08d86049bbde%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637365217102685605=6Regh9vt9RkykD0R6GjrxBMAUVcdXFI6hdBCfXGOazU%3D=0>


On 24 Sep 2020, at 2:23 am, Jeffrey D. Sessler 
mailto:j...@scrippscollege.edu>> wrote:

You probably want 8.10.139.43, which is fully BU supported and suggested for 
production. This is a link to the release notes, I’d check to see if any of 
these apply. Also, verify your timeouts aren’t set too low for the radius 
responses coming from eduroam.  I ran into this at Cal Poly in Pomona, where I 
could not interactively login to eduroam, but I could save my credentials and 
it worked just fine.  I suspected a timeout set too low (this was Aruba 
equipment however). Had an entire group there for a meeting that faced the same 
issues.

https://www.cisco.com/web/software/280926587/153915/Release_Notes_8_10_139_43.pdf<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.cisco.com%2Fweb%2Fsoftware%2F280926587%2F153915%2FRelease_Notes_8_10_139_43.pdf=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C6078e49e647e41bd416c08d86049bbde%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637365217102695599=lNJqE8txYPSQ%2B0e5dW8QBscMaH2K6QJXUP%2FgZi0vGRs%3D=0>

Jeff


From: The EDUCAUSE Wireless Issues Community Group Listserv 
mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> 
On Behalf Of Mathieu Sturm
Sent: Wednesday, September 23, 2020 3:07 AM
To: 
WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
Subject: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hello,

We updated our Cisco 5520 controllers from 8.5.151.0 to 8.10.130.0. Since the 
update we have issues with eduroam. Before the update the students and other 
users could select the ssid eduroam and fill in the credentials and they were 
connected.
Now we have to update the NIC’s (mostly AX200) to the latest version and/or 
update to W10 version 2004. And even then we often have to configure the SSID 
manually and save credentials.

We see that the users get to the ISE and are permitted but the WLC doesn’t 
always see this permit. Or the ISE gives a certificate warning (I’ve checked 
our certificates, all are valid).

Is anyone experiencing the same thing?

We went tot 8.10.130.0 for our new 9120’s.

Mathieu Sturm
Hoofdmedewerker Netwerkbeheer



Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40HOGENT.BE%7C6078e49e647e41bd416c08d86049bbde%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C1%7C637365217102695599=PIdACvXLn2TSxtAgy1Y4DBiicgvzdJFn7gHJe3YHQM0%3D=0>

**
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at 
https://www.educause.edu/community<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.educause.

Re: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

2020-09-23 Thread Tristan Gulyas 
Hi,

Watching this thread closely.  We're currently on 8.5.151 but need to migrate 
to an 8.10 release for the 9130ax's.

If anyone has any TAC cases or bug IDs that may reference this issue, that 
would be super useful!

Tristan
-- 
TRISTAN GULYAS
Senior Network Engineer

Technology Services, eSolutions
Monash University
738 Blackburn Road
Clayton 3168
Australia

E: tristan.gul...@monash.edu <mailto:tristan.gul...@monash.edu>
monash.edu <http://monash.edu/>

> On 24 Sep 2020, at 2:23 am, Jeffrey D. Sessler  
> wrote:
> 
> You probably want 8.10.139.43, which is fully BU supported and suggested for 
> production. This is a link to the release notes, I’d check to see if any of 
> these apply. Also, verify your timeouts aren’t set too low for the radius 
> responses coming from eduroam.  I ran into this at Cal Poly in Pomona, where 
> I could not interactively login to eduroam, but I could save my credentials 
> and it worked just fine.  I suspected a timeout set too low (this was Aruba 
> equipment however). Had an entire group there for a meeting that faced the 
> same issues.  
>  
> https://www.cisco.com/web/software/280926587/153915/Release_Notes_8_10_139_43.pdf
>  
> <https://www.cisco.com/web/software/280926587/153915/Release_Notes_8_10_139_43.pdf>
>  
> Jeff
>  
>  
> From: The EDUCAUSE Wireless Issues Community Group Listserv 
>  <mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>> On Behalf Of Mathieu Sturm
> Sent: Wednesday, September 23, 2020 3:07 AM
> To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU 
> <mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU>
> Subject: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues
>  
> Hello,
>  
> We updated our Cisco 5520 controllers from 8.5.151.0 to 8.10.130.0. Since the 
> update we have issues with eduroam. Before the update the students and other 
> users could select the ssid eduroam and fill in the credentials and they were 
> connected. 
> Now we have to update the NIC’s (mostly AX200) to the latest version and/or 
> update to W10 version 2004. And even then we often have to configure the SSID 
> manually and save credentials.
>  
> We see that the users get to the ISE and are permitted but the WLC doesn’t 
> always see this permit. Or the ISE gives a certificate warning (I’ve checked 
> our certificates, all are valid).
>  
> Is anyone experiencing the same thing?
>  
> We went tot 8.10.130.0 for our new 9120’s.
>  
> Mathieu Sturm
> Hoofdmedewerker Netwerkbeheer
> 
> 
> 
> Directie Financiën, Infrastructuur en IT
> Afdeling Netwerkbeheer
> Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
> Valentin Vaerwyckweg 1 - 9000 Gent
> +32 9 243 35 23
> www.hogent.be 
> <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>
>  
> **
> Replies to EDUCAUSE Community Group emails are sent to the entire community 
> list. If you want to reply only to the person who sent the message, copy and 
> paste their email address and forward the email reply. Additional 
> participation and subscription information can be found at 
> https://www.educause.edu/community <https://www.educause.edu/community>
> **
> Replies to EDUCAUSE Community Group emails are sent to the entire community 
> list. If you want to reply only to the person who sent the message, copy and 
> paste their email address and forward the email reply. Additional 
> participation and subscription information can be found at 
> https://www.educause.edu/community <https://www.educause.edu/community>

**
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

RE: Cisco 8.10.130.0 eduroam issues

2020-09-23 Thread Jeffrey D. Sessler 
You probably want 8.10.139.43, which is fully BU supported and suggested for 
production. This is a link to the release notes, I'd check to see if any of 
these apply. Also, verify your timeouts aren't set too low for the radius 
responses coming from eduroam.  I ran into this at Cal Poly in Pomona, where I 
could not interactively login to eduroam, but I could save my credentials and 
it worked just fine.  I suspected a timeout set too low (this was Aruba 
equipment however). Had an entire group there for a meeting that faced the same 
issues.

https://www.cisco.com/web/software/280926587/153915/Release_Notes_8_10_139_43.pdf

Jeff


From: The EDUCAUSE Wireless Issues Community Group Listserv 
 On Behalf Of Mathieu Sturm
Sent: Wednesday, September 23, 2020 3:07 AM
To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU
Subject: [WIRELESS-LAN] Cisco 8.10.130.0 eduroam issues

Hello,

We updated our Cisco 5520 controllers from 8.5.151.0 to 8.10.130.0. Since the 
update we have issues with eduroam. Before the update the students and other 
users could select the ssid eduroam and fill in the credentials and they were 
connected.
Now we have to update the NIC's (mostly AX200) to the latest version and/or 
update to W10 version 2004. And even then we often have to configure the SSID 
manually and save credentials.

We see that the users get to the ISE and are permitted but the WLC doesn't 
always see this permit. Or the ISE gives a certificate warning (I've checked 
our certificates, all are valid).

Is anyone experiencing the same thing?

We went tot 8.10.130.0 for our new 9120's.

Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be<https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.hogent.be%2F=02%7C01%7Cmathieu.sturm%40hogent.be%7C86879fbc6e8c49ab13ff08d67ac4edef%7C5cf7310e091a4bc5acd726c721d4cccd%7C1%7C0%7C636831383554731873=8NfYjNEE4XDViDT6wMtCYFa0cY8g5CXqS9kf7VtYBcU%3D=0>


**
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

**
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

Re: Cisco 8.10.130.0 eduroam issues

2020-09-23 Thread Mitchell David Gentry 
Mathieu,

Sorry to hear about your issues. We haven’t had any reported eduroam incidents 
since upgrading to 8.10.130.0 several months ago in our mixed Windows/Mac 
device environment.
 
For our lab hardware, we have Cisco 5508 WLC’s running 8.5.151.0 and Cisco 8540 
WLC’s running 8.10.130.0 used for testing.
For production, our Cisco 8540's are running 8.10.130.0 with the Cisco 9120 
Access Points on Danforth.

Thanks,

Mitch Gentry

Network Engineering, Manager
Washington University in St. Louis
mitch.gen...@wustl.edu

**
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

Cisco 8.10.130.0 eduroam issues

2020-09-23 Thread Mathieu Sturm 
Hello,

We updated our Cisco 5520 controllers from 8.5.151.0 to 8.10.130.0. Since the 
update we have issues with eduroam. Before the update the students and other 
users could select the ssid eduroam and fill in the credentials and they were 
connected.
Now we have to update the NIC's (mostly AX200) to the latest version and/or 
update to W10 version 2004. And even then we often have to configure the SSID 
manually and save credentials.

We see that the users get to the ISE and are permitted but the WLC doesn't 
always see this permit. Or the ISE gives a certificate warning (I've checked 
our certificates, all are valid).

Is anyone experiencing the same thing?

We went tot 8.10.130.0 for our new 9120's.

Mathieu Sturm
Hoofdmedewerker Netwerkbeheer

[https://www.hogent.be/www/assets/Image/logo2018.png]

Directie Financiën, Infrastructuur en IT
Afdeling Netwerkbeheer
Campus Schoonmeerssen - Gebouw B  Lokaal B0.75
Valentin Vaerwyckweg 1 - 9000 Gent
+32 9 243 35 23
www.hogent.be


**
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community