Re: [Wireshark-users] How to decode H264 ?
Hi Anders, thank you very much. I have got it for H264. Another problem, for H263+, it's using the dynamic payload type too, but I do not found it in Edit-prefrences-protocols. How to decode the H263+ ? Thanks 2008/1/22, Anders Broman [EMAIL PROTECTED]: Hi, H264 decoding (only minimal decoding is made), is only available from WS 0.99.7 and bugfixes has gon in since the release.(development builds available) If you haven't got the setup information in your trace there is the option to do Edit-prefrences-protocols-h264 and set the Payload type 125 in your case. You still have to do decode as RTP every time you open the trace. Regards Anders From: [EMAIL PROTECTED] on behalf of list mail Sent: Mon 1/21/2008 4:20 PM To: wireshark-users@wireshark.org Subject: [Wireshark-users] How to decode H264 ? Hi all, I'm new to Wireshark, it's a great software. Currently I using it to analyse the H264 RTP video stream. When I captured the H264 RTP video stream, and try to decodec it - use the menu Decodec As... and choosed RTP to decode it, but it just show me: PT=Unknown (125), SSRC=0xD2D9EB2, Seq=35012, Time=4266020486, Mark , So there have anybody can help me how to decodec it as H264 ? Thank you in advance. ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] How to decode H264 ?
Hi, Thats currently not possible but if you do get the setup info in the trace I think it would decode. Regards Anders _ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För list mail Skickat: den 21 januari 2008 18:52 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] How to decode H264 ? Hi Anders, thank you very much. I have got it for H264. Another problem, for H263+, it's using the dynamic payload type too, but I do not found it in Edit-prefrences-protocols. How to decode the H263+ ? Thanks 2008/1/22, Anders Broman [EMAIL PROTECTED]: Hi, H264 decoding (only minimal decoding is made), is only available from WS 0.99.7 and bugfixes has gon in since the release.(development builds available) If you haven't got the setup information in your trace there is the option to do Edit-prefrences-protocols-h264 and set the Payload type 125 in your case. You still have to do decode as RTP every time you open the trace. Regards Anders From: [EMAIL PROTECTED] on behalf of list mail Sent: Mon 1/21/2008 4:20 PM To: wireshark-users@wireshark.org Subject: [Wireshark-users] How to decode H264 ? Hi all, I'm new to Wireshark, it's a great software. Currently I using it to analyse the H264 RTP video stream. When I captured the H264 RTP video stream, and try to decodec it - use the menu Decodec As... and choosed RTP to decode it, but it just show me: PT=Unknown (125), SSRC=0xD2D9EB2, Seq=35012, Time=4266020486, Mark , So there have anybody can help me how to decodec it as H264 ? Thank you in advance. ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] How to decode H264 ?
Get setup info in the trace? I do not understand it, can you please tell me how ? Thanks 2008/1/22, Anders Broman [EMAIL PROTECTED]: Hi, That's currently not possible but if you do get the setup info in the trace I think it would decode. Regards Anders -- *Från:* [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] *För *list mail *Skickat:* den 21 januari 2008 18:52 *Till:* Community support list for Wireshark *Ämne:* Re: [Wireshark-users] How to decode H264 ? Hi Anders, thank you very much. I have got it for H264. Another problem, for H263+, it's using the dynamic payload type too, but I do not found it in Edit-prefrences-protocols. How to decode the H263+ ? Thanks 2008/1/22, Anders Broman [EMAIL PROTECTED]: Hi, H264 decoding (only minimal decoding is made), is only available from WS 0.99.7 and bugfixes has gon in since the release.(development builds available) If you haven't got the setup information in your trace there is the option to do Edit-prefrences-protocols-h264 and set the Payload type 125 in your case. You still have to do decode as RTP every time you open the trace. Regards Anders From: [EMAIL PROTECTED] on behalf of list mail Sent: Mon 1/21/2008 4:20 PM To: wireshark-users@wireshark.org Subject: [Wireshark-users] How to decode H264 ? Hi all, I'm new to Wireshark, it's a great software. Currently I using it to analyse the H264 RTP video stream. When I captured the H264 RTP video stream, and try to decodec it - use the menu Decodec As... and choosed RTP to decode it, but it just show me: PT=Unknown (125), SSRC=0xD2D9EB2, Seq=35012, Time=4266020486, Mark , So there have anybody can help me how to decodec it as H264 ? Thank you in advance. ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] How to decode H264 ?
Hi, If the stream is set up with SIP H323(H.245) MEGACO/H.248 or RTSP and those packets are in the trace Wireshark will be able to Determine the payload type and UDP ports used and decode RTP and payload. Regards Anderes _ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För list mail Skickat: den 21 januari 2008 19:14 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] How to decode H264 ? Get setup info in the trace? I do not understand it, can you please tell me how ? Thanks 2008/1/22, Anders Broman [EMAIL PROTECTED]: Hi, That's currently not possible but if you do get the setup info in the trace I think it would decode. Regards Anders _ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För list mail Skickat: den 21 januari 2008 18:52 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] How to decode H264 ? Hi Anders, thank you very much. I have got it for H264. Another problem, for H263+, it's using the dynamic payload type too, but I do not found it in Edit-prefrences-protocols. How to decode the H263+ ? Thanks 2008/1/22, Anders Broman mailto:[EMAIL PROTECTED] [EMAIL PROTECTED]: Hi, H264 decoding (only minimal decoding is made), is only available from WS 0.99.7 and bugfixes has gon in since the release.(development builds available) If you haven't got the setup information in your trace there is the option to do Edit-prefrences-protocols-h264 and set the Payload type 125 in your case. You still have to do decode as RTP every time you open the trace. Regards Anders From: [EMAIL PROTECTED] on behalf of list mail Sent: Mon 1/21/2008 4:20 PM To: wireshark-users@wireshark.org Subject: [Wireshark-users] How to decode H264 ? Hi all, I'm new to Wireshark, it's a great software. Currently I using it to analyse the H264 RTP video stream. When I captured the H264 RTP video stream, and try to decodec it - use the menu Decodec As... and choosed RTP to decode it, but it just show me: PT=Unknown (125), SSRC=0xD2D9EB2, Seq=35012, Time=4266020486, Mark , So there have anybody can help me how to decodec it as H264 ? Thank you in advance. ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users
Re: [Wireshark-users] How to decode H264 ?
Hi, Ive checked in a change to Add a preferense to decode a dynamic payload type as H263-1998/H263-2000 Committed revision 24153. You can download a development build for Windows in a few hours from http://www.wireshark.org/download/automated/ Regards Anders _ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Anders Broman Skickat: den 21 januari 2008 21:27 Till: 'Community support list for Wireshark' Ämne: Re: [Wireshark-users] How to decode H264 ? Hi, If the stream is set up with SIP H323(H.245) MEGACO/H.248 or RTSP and those packets are in the trace Wireshark will be able to Determine the payload type and UDP ports used and decode RTP and payload. Regards Anderes _ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För list mail Skickat: den 21 januari 2008 19:14 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] How to decode H264 ? Get setup info in the trace? I do not understand it, can you please tell me how ? Thanks 2008/1/22, Anders Broman [EMAIL PROTECTED]: Hi, That's currently not possible but if you do get the setup info in the trace I think it would decode. Regards Anders _ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För list mail Skickat: den 21 januari 2008 18:52 Till: Community support list for Wireshark Ämne: Re: [Wireshark-users] How to decode H264 ? Hi Anders, thank you very much. I have got it for H264. Another problem, for H263+, it's using the dynamic payload type too, but I do not found it in Edit-prefrences-protocols. How to decode the H263+ ? Thanks 2008/1/22, Anders Broman mailto:[EMAIL PROTECTED] [EMAIL PROTECTED]: Hi, H264 decoding (only minimal decoding is made), is only available from WS 0.99.7 and bugfixes has gon in since the release.(development builds available) If you haven't got the setup information in your trace there is the option to do Edit-prefrences-protocols-h264 and set the Payload type 125 in your case. You still have to do decode as RTP every time you open the trace. Regards Anders From: [EMAIL PROTECTED] on behalf of list mail Sent: Mon 1/21/2008 4:20 PM To: wireshark-users@wireshark.org Subject: [Wireshark-users] How to decode H264 ? Hi all, I'm new to Wireshark, it's a great software. Currently I using it to analyse the H264 RTP video stream. When I captured the H264 RTP video stream, and try to decodec it - use the menu Decodec As... and choosed RTP to decode it, but it just show me: PT=Unknown (125), SSRC=0xD2D9EB2, Seq=35012, Time=4266020486, Mark , So there have anybody can help me how to decodec it as H264 ? Thank you in advance. ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users http://www.wireshark.org/mailman/listinfo/wireshark-users ___ Wireshark-users mailing list Wireshark-users@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-users