Sorry I forgot to say I was using FT8 when the problem was observed .,,not in
contest mode
Sent from my iPhone
> On Jun 29, 2020, at 12:18 AM, SCHMAHL wrote:
>
> I have installed version 2.2.2 and the latest version update of Win10. I
> notice that with many cycles I get no decodes even though there are many good
> signals. Sometimes there are up to 3 decodes per cycle and then none. On
> occasion the decoding stops completely and I have to hit the decode key to
> start it again or reboot the program. Many times I have to send a reply 3 or
> 4 times after someone replies to my CQ before the QSO continues. Perhaps
> these problems are related. I have never had this decoding problem before. It
> happens also with very few signals observed on the band not just when it is
> crowded.
> Ron Schmahl K2PSD
>
>
>> On June 28, 2020 at 6:12 PM Bill Somerville wrote:
>>
>>
>>> On 28/06/2020 19:12, David Kjellquist wrote:
>>> Myself and a friend both tried operating today using fast decode (not
>>> normal or deep). We both had crashes with other decode settings.
>>>
>>> Both experienced no crashes or other problems. We both use WSJT-X
>>> 2.2.2, Windows 10 (up to date), JTalert 2.16.8, N3FJP 6.03 and Flex 6600.
>>>
>>> Hope this helps.
>>>
>>> --
>>> Dave, WB5NHL
>>
>> Hi Dave,
>>
>> thanks for that report. Apologies to you and others that we could not
>> identify the problem earlier. It looked like the bands were plenty busy
>> enough for working in fast decode mode without AP decodes and missing a
>> few decodes every period was not too much of a hardship.
>>
>> 73
>> Bill
>> G4WJS.
>>
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel