Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread Joe 

This is even stranger,

My soundcard is a Soundblaster Recon 3D

And when I isnstalled the new software, it could not find the soundcard.

Then I looked and I couldn't either! I had to re-0install the sound card 
software how weird is that!?


joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 7/15/2019 4:05 PM, Jim Record wrote:
Yes. I had to push it to almost 100% and push the Windows Pro 10 audio 
to 60%.


On Mon, Jul 15, 2019 at 9:52 AM DG2YCB, Uwe > wrote:


Many thanks for the new GA version! Works well so far here on my
computer
(64-bit Windows).
One observation: With the new 64-bit GA version I needed to
increase PWR
slider from around 50 % to now nearly 100 % to get sufficient
audio level at
my FT-991. Old settings resulted in a few mW TX output. Will do
some further
tests, but seems to be reproducible.
Anyone else experiencing that with the 64-bit version?

73 de Uwe, DG2YCB



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net

https://lists.sourceforge.net/lists/listinfo/wsjt-devel

--
Jim Record
/Firgenholt Joyner/
(Old English (sort of) for Mountain Wood Joiner)


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread Hasan al-Basri 
yes, had to go to 100% but works just fine
73, N0AN
Hasan


On Mon, Jul 15, 2019 at 4:09 PM Jim Record  wrote:

> Yes. I had to push it to almost 100% and push the Windows Pro 10 audio to
> 60%.
>
> On Mon, Jul 15, 2019 at 9:52 AM DG2YCB, Uwe  wrote:
>
>> Many thanks for the new GA version! Works well so far here on my computer
>> (64-bit Windows).
>> One observation: With the new 64-bit GA version I needed to increase PWR
>> slider from around 50 % to now nearly 100 % to get sufficient audio level
>> at
>> my FT-991. Old settings resulted in a few mW TX output. Will do some
>> further
>> tests, but seems to be reproducible.
>> Anyone else experiencing that with the 64-bit version?
>>
>> 73 de Uwe, DG2YCB
>>
>>
>>
>> ___
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> --
> Jim Record
> *Firgenholt Joyner*
> (Old English (sort of) for Mountain Wood Joiner)
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread Jim Record 
Yes. I had to push it to almost 100% and push the Windows Pro 10 audio to
60%.

On Mon, Jul 15, 2019 at 9:52 AM DG2YCB, Uwe  wrote:

> Many thanks for the new GA version! Works well so far here on my computer
> (64-bit Windows).
> One observation: With the new 64-bit GA version I needed to increase PWR
> slider from around 50 % to now nearly 100 % to get sufficient audio level
> at
> my FT-991. Old settings resulted in a few mW TX output. Will do some
> further
> tests, but seems to be reproducible.
> Anyone else experiencing that with the 64-bit version?
>
> 73 de Uwe, DG2YCB
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
-- 
Jim Record
*Firgenholt Joyner*
(Old English (sort of) for Mountain Wood Joiner)
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread Hasan al-Basri 
Yes, same here, my power slider now has to be set at maximum to just barely
tickle the ALC on my TS-590sg. Not a problem, just different from some of
the prior versions...in fact a recent debug version showed the same
characteristic, requiring power slider to be at max with Speaker Output
level at 0 dB.

Again, not a problem, just a change in behavior. Program (64 bit Win10) is
doing very, very well on both fT8 and FT4

Will try msk144 on 6m in the morning.
73, N0AN
Hasan


On Mon, Jul 15, 2019 at 2:20 PM DG2YCB, Uwe  wrote:

> For comparison I am running the 32-bit and the 64-bit version of WSJT-X
> v2.1.0 GA concurrently. PWR sliders of both versions are set to about 50%
> (= -20.1 dB transmit digital gain). To reach in both cases the same TX PWR
> output at my Yaesu FT-991 I have to increase Windows Volume Control from 7
> for all the 32-bit versions (and for 64-bit until 2.1.0-rc7) to about 80
> for the new 64-bit GA release of WSJT-X. Although with that the audio level
> can be adjusted, this means a big difference in digital audio gain between
> the two versions. What may cause this difference? Is there another bug in
> QT 5.12.4? Or might there be a defect in the new 64-bit GA version of 2.1.0?
>
>
>
>
>
> 73 de Uwe, DG2YCB
>
>
>
> *Von:* Paul Kube [mailto:paul.k...@gmail.com]
> *Gesendet:* Montag, 15. Juli 2019 18:19
> *An:* WSJT software development
> *Betreff:* Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio
> level has changed
>
>
>
> >  Anyone else experiencing that with the 64-bit version?
>
>
>
> Yes.
>
>
>
> Tune power also.
>
>
>
> IC-7300, Win 10 x64 Pro.
>
>
>
> 73, Paul K6PO
>
>
>
>
>
> On Mon, Jul 15, 2019 at 8:52 AM DG2YCB, Uwe  wrote:
>
> Many thanks for the new GA version! Works well so far here on my computer
> (64-bit Windows).
> One observation: With the new 64-bit GA version I needed to increase PWR
> slider from around 50 % to now nearly 100 % to get sufficient audio level
> at
> my FT-991. Old settings resulted in a few mW TX output. Will do some
> further
> tests, but seems to be reproducible.
> Anyone else experiencing that with the 64-bit version?
>
> 73 de Uwe, DG2YCB
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread DG2YCB, Uwe 
For comparison I am running the 32-bit and the 64-bit version of WSJT-X v2.1.0 
GA concurrently. PWR sliders of both versions are set to about 50% (= -20.1 dB 
transmit digital gain). To reach in both cases the same TX PWR output at my 
Yaesu FT-991 I have to increase Windows Volume Control from 7 for all the 
32-bit versions (and for 64-bit until 2.1.0-rc7) to about 80 for the new 64-bit 
GA release of WSJT-X. Although with that the audio level can be adjusted, this 
means a big difference in digital audio gain between the two versions. What may 
cause this difference? Is there another bug in QT 5.12.4? Or might there be a 
defect in the new 64-bit GA version of 2.1.0?

 



 

73 de Uwe, DG2YCB 

 

Von: Paul Kube [mailto:paul.k...@gmail.com] 
Gesendet: Montag, 15. Juli 2019 18:19
An: WSJT software development
Betreff: Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has 
changed

 

>  Anyone else experiencing that with the 64-bit version?

 

Yes. 

 

Tune power also.

 

IC-7300, Win 10 x64 Pro.

 

73, Paul K6PO

 

 

On Mon, Jul 15, 2019 at 8:52 AM DG2YCB, Uwe  wrote:

Many thanks for the new GA version! Works well so far here on my computer
(64-bit Windows).
One observation: With the new 64-bit GA version I needed to increase PWR
slider from around 50 % to now nearly 100 % to get sufficient audio level at
my FT-991. Old settings resulted in a few mW TX output. Will do some further
tests, but seems to be reproducible.
Anyone else experiencing that with the 64-bit version?

73 de Uwe, DG2YCB



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread John Zantek 
Same here, on a Flex with Win10 x64 Pro.  Knowing that there were issues with 
the RC’s, I wasn’t surprised to see that.

 

I quickly downloaded 2.1.0 32-bit GA and tested.  Yes, the expected higher 
output is restored when running the 32-bit GA release.

 

73 John W7CD

 

From: Paul Kube [mailto:paul.k...@gmail.com] 
Sent: Monday, July 15, 2019 9:19 AM
To: WSJT software development 
Subject: Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has 
changed

 

>  Anyone else experiencing that with the 64-bit version?

 

Yes. 

 

Tune power also.

 

IC-7300, Win 10 x64 Pro.

 

73, Paul K6PO

 

 

On Mon, Jul 15, 2019 at 8:52 AM DG2YCB, Uwe mailto:dg2...@gmx.de> > wrote:

Many thanks for the new GA version! Works well so far here on my computer
(64-bit Windows).
One observation: With the new 64-bit GA version I needed to increase PWR
slider from around 50 % to now nearly 100 % to get sufficient audio level at
my FT-991. Old settings resulted in a few mW TX output. Will do some further
tests, but seems to be reproducible.
Anyone else experiencing that with the 64-bit version?

73 de Uwe, DG2YCB



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread Paul Kube 
>  Anyone else experiencing that with the 64-bit version?

Yes.

Tune power also.

IC-7300, Win 10 x64 Pro.

73, Paul K6PO


On Mon, Jul 15, 2019 at 8:52 AM DG2YCB, Uwe  wrote:

> Many thanks for the new GA version! Works well so far here on my computer
> (64-bit Windows).
> One observation: With the new 64-bit GA version I needed to increase PWR
> slider from around 50 % to now nearly 100 % to get sufficient audio level
> at
> my FT-991. Old settings resulted in a few mW TX output. Will do some
> further
> tests, but seems to be reproducible.
> Anyone else experiencing that with the 64-bit version?
>
> 73 de Uwe, DG2YCB
>
>
>
> ___
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] WSJT-X 2.1.0 64-bit GA release: TX audio level has changed

2019-07-15 Thread DG2YCB, Uwe 
Many thanks for the new GA version! Works well so far here on my computer
(64-bit Windows).
One observation: With the new 64-bit GA version I needed to increase PWR
slider from around 50 % to now nearly 100 % to get sufficient audio level at
my FT-991. Old settings resulted in a few mW TX output. Will do some further
tests, but seems to be reproducible.
Anyone else experiencing that with the 64-bit version?

73 de Uwe, DG2YCB



___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel