Re: Analogy supported DAQ
Hello Ivan, I also use Analogy and I believe that I am the user that Jan was referring to. I have used some of the newer NI cards a few years ago but, at the time at least, developing Analogy drivers for them was not possible since NI does not make low-level hardware register information available to users. Without that information, driver development was not possible. We chose to use the NI development libraries at the lowest-level and map those to Analogy calls so that we could reuse some of our higher-level code. That seemed to work reasonably well. I have recently developed an Analogy driver for an ACCES I/O mPCIe card (mPCIe-AIO16-16F) as well as one for the CAN Bus interface on an ARM board that we are using. We implemented the Analogy driver for the CAN Bus i/f so that our higher level software could acquire data from CAN sensors in the same way that it acquires data from the analog I/O card. I'd be open to sharing some of our recent driver development with you if this seems helpful. Let me know if I can be of assistance. Peter On 4/15/2022 10:19 AM, Ivan F. Valerio via Xenomai wrote: On 2022-04-13 11:59, Jan Kiszka wrote: On 12.04.22 18:36, Ivan F. Valerio via Xenomai wrote: Hello, I am looking to use Xenomai's analogy to connect my application to a NI PCIe DAQ card. I found your list of supported hardware for analogy, and the only PCIe found in your list are no longer supported by National Instruments(PCIe-6251 & PCIe-6259). Are there any other PCIe cards supported by Analogy? How would I go about confirming compatibility with the newer NI PCIe cards? Analogy was about to be removed from Xenomai because no one was contributing updates to it in a long while, particularly -but not only- drivers. One user raised his voice that at least the core is still used (with out-of-tree drivers), so that move was postponed. In that light, it is a bit unlikely that you get much more feedback. We are surely open to new contributors "reviving" part of Analogy again, specifically /wrt to newer hardware. The first step to assess the efforts would likely be comparing older drivers and their manuals (or kernel drivers, if any) to newer one, e.g. whether the register interface is just an extension or rather something completely different. Jan I am interested in perhaps doing an assessment and even submit patches as our application depends on Analogy support however I am not familiar with device driver development. Any Xenomai/Linux resources that you can point me to in order to get started? Thanks. -Ivan
Re: Analogy supported DAQ
On 2022-04-13 11:59, Jan Kiszka wrote: On 12.04.22 18:36, Ivan F. Valerio via Xenomai wrote: Hello, I am looking to use Xenomai's analogy to connect my application to a NI PCIe DAQ card. I found your list of supported hardware for analogy, and the only PCIe found in your list are no longer supported by National Instruments(PCIe-6251 & PCIe-6259). Are there any other PCIe cards supported by Analogy? How would I go about confirming compatibility with the newer NI PCIe cards? Analogy was about to be removed from Xenomai because no one was contributing updates to it in a long while, particularly -but not only- drivers. One user raised his voice that at least the core is still used (with out-of-tree drivers), so that move was postponed. In that light, it is a bit unlikely that you get much more feedback. We are surely open to new contributors "reviving" part of Analogy again, specifically /wrt to newer hardware. The first step to assess the efforts would likely be comparing older drivers and their manuals (or kernel drivers, if any) to newer one, e.g. whether the register interface is just an extension or rather something completely different. Jan I am interested in perhaps doing an assessment and even submit patches as our application depends on Analogy support however I am not familiar with device driver development. Any Xenomai/Linux resources that you can point me to in order to get started? Thanks. -Ivan
Re: Analogy supported DAQ
On 12.04.22 18:36, Ivan F. Valerio via Xenomai wrote: > Hello, > > I am looking to use Xenomai's analogy to connect my application to a NI > PCIe DAQ card. I found your list of supported hardware for analogy, and > the only PCIe found in your list are no longer supported by National > Instruments(PCIe-6251 & PCIe-6259). Are there any other PCIe cards > supported by Analogy? How would I go about confirming compatibility with > the newer NI PCIe cards? Analogy was about to be removed from Xenomai because no one was contributing updates to it in a long while, particularly -but not only- drivers. One user raised his voice that at least the core is still used (with out-of-tree drivers), so that move was postponed. In that light, it is a bit unlikely that you get much more feedback. We are surely open to new contributors "reviving" part of Analogy again, specifically /wrt to newer hardware. The first step to assess the efforts would likely be comparing older drivers and their manuals (or kernel drivers, if any) to newer one, e.g. whether the register interface is just an extension or rather something completely different. Jan -- Siemens AG, Technology Competence Center Embedded Linux
Analogy supported DAQ
Hello, I am looking to use Xenomai's analogy to connect my application to a NI PCIe DAQ card. I found your list of supported hardware for analogy, and the only PCIe found in your list are no longer supported by National Instruments(PCIe-6251 & PCIe-6259). Are there any other PCIe cards supported by Analogy? How would I go about confirming compatibility with the newer NI PCIe cards? Thank you, Ivan F. Valerio
