[XFree86] XDarwin Alt key mapping on MacOS 10.2
Hi, I am running XDarwin1.02/XFree86 4.0.3 on an Apple Powerbook G4 and I cannot get the Alt key to work. I thought it was supposed to be bound to the Option key by default but when am in X it does nothing. I need to find a way to remap either the option key or the Apple Command key to the alt key (keysym Alt_L ??). Here is my xmodmap output: xmodmap: up to 2 keys per modifier, (keycodes in parentheses): shift Shift_L (0x40), Shift_R (0x44) lockCaps_Lock (0x41) control Control_L (0x43), Control_R (0x46) mod1Mode_switch (0x42), Alt_R (0x45) mod2Meta_L (0x3f) mod3 mod4 mod5 When I use xev to get event information on the option key I get: KeyPress event, serial 25, synthetic NO, window 0xe1, root 0x3a, subw 0x0, time 1838131499, (141,-162), root:(1114,293), state 0x0, keycode 66 (keysym 0xffe7, Meta_L), same_screen YES, XLookupString gives 0 bytes: "" KeyRelease event, serial 25, synthetic NO, window 0xe1, root 0x3a, subw 0x0, time 1838132179, (141,-162), root:(1114,293), state 0x8, keycode 66 (keysym 0xffe7, Meta_L), same_screen YES, XLookupString gives 0 bytes: "" The command key event information is: KeyPress event, serial 20, synthetic NO, window 0xe1, root 0x3a, subw 0x0, time 1838245299, (97,-75), root:(1070,380), state 0x0, keycode 63 (keysym 0xffe7, Meta_L), same_screen YES, XLookupString gives 0 bytes: "" KeyRelease event, serial 25, synthetic NO, window 0xe1, root 0x3a, subw 0x0, time 1838245383, (97,-75), root:(1070,380), state 0x10, keycode 63 (keysym 0xffe7, Meta_L), same_screen YES, XLookupString gives 0 bytes: "" What I need is a way to translate this key event information into an xmodmap incantation that will give me ALT functionality on one of those keys. The xmodmap documentation is pretty thin, I came up empty searching the list archives, and I was not able to google up an useful info either so I'm asking here. Any xmodmap-guru advice or pointers to documentation/info on making this work are greatly appreciated. Thanks in advance, [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree-current does not work on VIA EPIA-M
Mel, This is a stupid response and demonstrates more about you than the chipset. Yes the via CLE266 chipset is underpowered, but the fact is the C3 processors they are found with are as well. Their application is low-end and low-power consumption tasks only. As well the tiny motherboards these chips are found on means that you might only have the space for one or even no PCI slots. There is no AGP slot on the EPIA-M So you don't usually want to waste that PCI slot with a graphic card (I have a Hauppauge PVR-250 in my one slot). There is a via driver that Alan Houraine commited to XFree, so your comment about support is also clearly wrong. Now to answer the original question I'm also using a CVS version of the module from a while back. Can't remember off-hand from when, and I don't have this problem. However Sig 11 errors are usually pretty easy to find. Just recompile the via_drv.o module with "-g" flag and run the server under gdb from a remote console. Do a backtrace when it crashs and if it crashed in the via_drv.o module identify the exact line it crashed on. This should give all of the info needed to correct this problem Cheers David Daprès mel kravitz <[EMAIL PROTECTED]> (le 27/05/2003): > There is no support for this built in vga card(XFree86-4.3.0), no vesa > support in NetBSD, use your bios to disable this brain dead chip and add > an agp or pci vga card that is supported. > -Mel > > On Tue, 2003-05-27 at 13:44, Jukka Marin wrote: > > Hello, > > > > I have been trying to run XFree on VIA EPIA-M Mini-ITX mainboard, under > > NetBSD 1.6.1 (release) and NetBSD 1.6P. First I tried the linux driver > > binary, but after the VIA driver was committed to the XFree CVS tree, > > I started building XFree by myself. All versions work the same: > > > > Fatal server error: > > Caught signal 11. Server aborting > > > > I'm including the dmesg output of the system as well as the XFree log. > > > > NetBSD works just fine on the EPIA-M, it's just that I can't get XFree > > running. > > > > If I can help debugging the problem, please e-mail me and let me know > > what to do. Thanks. > > > > Jukka Marin > > [EMAIL PROTECTED] > > > > > > -- David Bateman[EMAIL PROTECTED] Motorola CRM +33 1 69 35 25 00 (Ph) Espace Technologique, Commune de St Aubin+33 1 69 35 25 01 (Fax) 91193 Gif-Sur-Yvette FRANCE The information contained in this communication has been classified as: [x] General Business Information [ ] Motorola Internal Use Only [ ] Motorola Confidential Proprietary ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] 1920x1200
Hi, I have some problems getting my X to show 1920x1200, which is the primary display mode for my 24" LCD display. I'm running XFree86 Version 4.3.0 on a Redhat 9 According to XFree86.0.log my video hardware is Radeon 7500, which is correct, but when it says > (II) RADEON(0): Not using mode "1920x1200" (no mode of this name) > (II) RADEON(0): Not using mode "1920x1080" (no mode of this name) Does that mean that the video card doesn't support 1920x1200 and 1920x1080? ./Anders -- Anders Jacob Joergensen Nokia Businuess Infrastructure Frederikskaj, 1790 Cph. V Phone: +45 33294586, +45 20918776 Brought to you by the character ':', the letters 'w' and 'q'. Enjoy! ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] ScrollLock - ModeLock
Hi, > I'd like to use ScrollLock to alternate between two different keyboard > maps (English and one with lots of accented characters that are placed > on various symbol keys). To make some key a keyboard map switcher you have to tie a keysym ISO_Next_Group to that key. There are many such switchers already defined in X11R6/lib/X11/xkb/symbols/group. One can choose an appropriate switcher using XkbOptions option in XF86Config, e.g. Option "XkbOptions" "grp:rctrl_toggle" Unfortunately the key you want is unusual for such task and there isn't such switcher in xkb/symbols/group file. But you can use the file for examples. And you can use the file xkb/rules/xfree86 as examples of XkbOptions. You need to take any switcher inside xkb/symbols/group, copy it, change the name of key (in 'angle brackets') to and give it new name (in quotes after 'xkb_symbols' word) e.g. "sclk_toggle". Then if you want it be selectable with XkbOptions, just add new string into xkb/rules/xfree86, a string like grp:sclk_toggle = +group(sclk_toggle) (I hope you will find an appropriate place for it :-) And now you can write in your XF86Config file Option "XkbOptions" "grp:sclk_toggle" and get the keyboard map switcher on ScrollLock key -- Ivan U. Pascal | e-mail: [EMAIL PROTECTED] Administrator of | Tomsk State University University Network | Tomsk, Russia ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Slow X strart up...
Hello All, 1. In my machine (MDK9, PIII 450, 128MB, i810), X (With out WM) startup is taking very long time ( nearly 2 min ). I am attechted the Log file. 2. Presently X is starting VT 7. But i want to start in vt 11/12. How to change the settings ? TIA, -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Don't scream for the Change. Become the Change. XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 07 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed May 28 14:38:45 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000fd0c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7120 card 8086,7120 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7121 card 8086,7121 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 4352,5934 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:09:0: chip 10ec,8029 card , rev 00 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xd000/26, 0xd400/19 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xd400 - 0xd407 (0x8) MX[B](B) [1] -1 0 0xd000 - 0xd3ff (0x400) MX[B
Re: [XFree86] XVideo/XvImage/XvShmPutImage on ATI Radeon with 4.3.99.4 twice as slow as with 4.3.0
On Tue, May 27, 2003 at 12:06:46PM +0200, Hans Korneder wrote: > sending XvImages through XvShmPutImage to my Radeon-Card with > XFree-4.3.99.4 takes twice the time it takes with XFree-4.3.0 on the same box. For me it works with 4.3.99.5 but I have smal flops in glxgears have ~1277 f/s on 3578.26 BogoMIPS maschine with radeon_rv250if. > Any hints? Are you using DRI from dri.sf.net..? Yoyr DRM in kernel is proably too old for that, uou better use new version from 2.4.21-rc4-ac1 or something... > - Linux 2.4.18 Linux 2.4.21-rc6 #2 śro maj 28 11:49:20 CEST 2003 > - GCC 3.2 3.2.3 > - ATI Radeon 9500pro (R300 AD) .~. # lspci | grep ATI 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If [Radeon 9000] (rev 01) 01:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon 9000] (Secondary) (rev 01) .~. # P.S. I have some unresolved symbols in ati_drv.o XFree86 Version 4.3.99.5 Release Date: 25 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.21-rc4 i686 [ELF] Build Date: 27 May 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed May 28 12:14:03 2003 (==) Using config file: "/etc/X11/XF86Config" (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found Symbol RADEONHandleMessage from module /usr/X11R6/lib/modules/drivers/ati_drv.o is unresolved! BScreen::BScreen: managing screen 0 using visual 0x23, depth 24 What DRI should I use to work correctly and the best wit my hardware and X-4.3.99.5 ??? Take care :-) -- # Damian *dEiMoS* Kołkowski # http://deimos.one.pl/ # ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fwd: configuração de placa de video
Observação: mensagem anexa encaminhada. ___ Yahoo! Mail Mais espaço, mais segurança e gratuito: caixa postal de 6MB, antivírus, proteção contra spam. http://br.mail.yahoo.com/--- Begin Message --- olá estou utilizando a versão 8 da RED HAT e preciso saber como instalar duas placas de video para que funcionem simultaneamente. ___ Yahoo! Mail O melhor e-mail gratuito da internet: 6MB de espaço, antivírus, acesso POP3, filtro contra spam. http://br.mail.yahoo.com/ --- End Message ---
[XFree86] Via Apollo PLE133 Tv out card
Hi all I want to configure a video card with tv-out. I want to show video on tv-out. How can I do it? What should I write in XF86Config File? Thanks a lot ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Your opinion is worth cash. See why.
Get PAID to: Eat FREE in famous restaurants. Fly FREE on national airlines. Stay FREE at expensive hotel chains. You get PAID and receive FREE meals, products, and services from big name, recognized companies for your opinion because we need Professional Business Evaluators! Your Membership fee Gives You Authorized Access to a Multitude Of local And National Companies Needing your Honest Evaluations. Call for FREE details 212 - 479 - 0870 A Professional Business Person is waiting for your call 24 hours a day, 7 days a week, including Sundays and holidays. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] confidential matter
Sir/madam, I need your help,I am Timothy koffi Matambu, the son of a Late minister during the reign of mobutu seseko, I came to know you in the course of my search for a reliable and God fearing partner and I decide to contact you because I believe you are a reputable person and I felt you can help us over this confidential matter. I count on your intergrity and honesty to be able to handle this business. My father was a minister in Democratic Republic of Congo during the reign of Late President Mobutu. Our father was killed during the rebel attack and our house was burnt. We manage to escape to Ghana with my mother and two of my sisters where we are now taking refuge.Before the death of my father he deposited US34.5MILLION, with a security company in Europe.The money is kept in a trunk boxes and was registered as precious substance. Thus there is nobody that knows that it is money that is in the box. All the document with which the money was deposited is with us. I am lookinf for somebody to that is capable and willing to travel to any part of Europe to receive the two trunk boxes of money on behalf of my family from the security company. We need a trust worthy and experience person that will help us to invest this money in your country and take us as one family and will also buy a house for us over there where we can live safely. We are expecting to hear from you.Please contact me on this Email Address:[EMAIL PROTECTED] Thanks for your anticipated cooperation.please include your telephone number and fax number in your reply Best Regards, TIMOTHY KOFFI ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal error
Hello, I am very new to the Linux world. This morning, I logged in and typed startx and received this message: Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock adn start again. As I mentioned, I do not know enough yet to diagnose nor resolve this issue without help. Any tips would be greatly appreciated. I do not even know how to search for the version number so that I could search the reports on your website. Thank you very much, LAura Huff
[XFree86] startx crashes using generated XF86Config. Card is #9GXE64.
Intel PC with Linux 2.4.20. Previously was ok with XF86 version 3.3 (I think) and Linux 2.0.13. Here follows 1st the XF86Config and then the error log: # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** # ** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ** # Section "Module" # This loads the DBE extension module. Load"dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option"omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load"type1" Load"speedo" #Load"freetype" #Load"xtt" # This loads the GLX module #Load "glx" # This loads the DRI module #Load "dri" EndSection # ** # Files section. This allows default font and rgb paths to be set # ** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" #FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" #FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. #ModulePath "/usr/X11R6/lib/modules" EndSection # ** # Server flags section. # ** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #Option "NoTrapSignals" # Uncomment this to disable the VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. #Option "DontVTSwitch" # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. #Option "DontZap" # Uncomment this to disable the / mode switching # sequences. This allows clients to receive th
