[XFree86] tdfx dga problems
Hi all. I've been trying for a while to get dga working with my voodoo3 PCI card. I've got dri/mesa working nicely, but i need dga for wine/starcraft. im running this as root, so i have access to /dev/mem (i checked too). When attempting to run anything with dga (mplayer, wine, or 'dga') the system appears to change resolutions, but only displays a blank screen. i dont get error messages from anything that uses dga except for wine: X Error of failed request: XF86DGADirectNotActivated Major opcode of failed request: 137 (XFree86-DGA) Minor opcode of failed request: 26 (XDGACreateColormap) Serial number of failed request: 2708 Current serial number in output stream: 2710 my XF86Config snippet: Section "Module" Load "dri" Load "drm" Load "extmod" Load "dbe" Load "v4l" Load "type1" Load "freetype" Load "glx" EndSection Section "Device" Identifier "device1" VendorName "3dfx" BoardName "Voodoo3 PCI" Driver "tdfx" EndSection in Xfree86.0.log -- (II) Loading extension XFree86-DGA is the only reference to dga im running x86 debian woody w/X v4.1.0.1 kernel 2.2.20 [is this too old?] I know there are some known issues with dga and tdfx (im wondering if anyone could please tell me what they are and any possible workarounds?) Thanks -Dom __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] GSAS Admissions
Thank you for contacting the Graduate School of Arts and Sciences at Harvard University. We hope the following information will be helpful and that you will contact us if you need further assistance. For more information please visit the Graduate School web site at www.gsas.harvard.edu. The on-line application will be available starting September 1, 2003. You can request a paper-based Application and Guide to Admissions and Financial Aid along with the program guides by following these instructions: Complete the application request form on our web site at www.gsas.harvard.edu. If you do not have access to the web, please send another email and indicate in the subject line, APPLICATION REQUEST make sure your subject line matches this exactly. In the body of the message, please include your NAME, COMPLETE MAILING ADDRESS AND PROGRAM OF INTEREST. Do not include attachments additional information and attachments will not be saved. The guides you will receive contain information about the Graduate School of Arts and Sciences only. To locate information about other Harvard schools or general Harvard information you should visit www.harvard.edu. The application deadline for the Division of Medical Sciences is December 8, 2003. The application deadline for Business Economics, Health Policy, Information Technology and Management, Organizational Behavior, Psychology and natural sciences programs except for Earth and Planetary Sciences, Engineering and Applied Sciences, and Medical Sciences is December 15, 2003. The application deadline for Earth and Planetary Sciences, Engineering and Applied Sciences, humanities and social sciences programs except for Business Economics, Health Policy, Information Technology and Management, Organizational Behavior, and Psychology is January 2, 2004. The Division of Engineering and Applied Sciences prefers that applications be submitted by December 15, 2003; the final deadline is January 2, 2004. Applications and all supporting documents must be received on or before the appropriate deadline. The application must be accompanied by the application fee of $85. Applications and supporting documentation received after the appropriate deadline will not be guaranteed consideration. The Graduate School is unable to acknowledge receipt of material received after the appropriate deadline. If you have submitted or are planning to submit your application and have questions, please send another email and indicate in the subject field APPLICATION QUESTION please remember to include your name and program of interest. Due to the high volume of email, the Graduate School will respond to your question as soon as possible, please expect a 2 week delay. The Graduate School is unable to respond to requests to confirm receipt of the application or material received after the appropriate deadlines. Minority applicants can feel free to contact our coordinator of minority recruitment at [EMAIL PROTECTED] to request a Minority Student Newsletter or ask any questions. If you have questions about your application for admission, or if problems arise when completing it, you may call (617) 496-6100 (please call between 2:00 pm and 5:00 pm Eastern Standard Time, Monday through Friday.) For questions regarding the financial aid application you may call (617) 495-5396 (please call between 2:00 pm and 5:00 pm Eastern Standard Time, Monday through Friday.) We are unable to accept collect calls. Please note: The Office of Admissions and Financial Aid will be closed from December 24, 2003 through January 1, 2004. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] FW: Xwindows crash
Hi, I am using Redhat 8.0 with the latest version of Xfree86 but my Xwindows is crash. I attached the log to you. Please help me. Thanks Regards, Emir Syah PT. Telemaya Asia Menara Rajawali 17th Fl. Jl. Mega Kuningan Lot 5.1 Kompleks Mega Kuningan Jakarta 12950, INDONESIA Ph. : 62 - 21 - 574 3930 Fax : 62 - 21 - 574 3931 Email : [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] x windows can't start
hi My x window can't open when it booting... it will shark after a while the error message like as: Fatal server error: could not open default font 'fixed' ... How can I troubleshooting?? OnkokNHK - Hot Peng Tel : 0755 - 26551055 ext 521 Fax: 0755 - 26551056 Mail: [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] can not start x server
(==) Using config file: "/etc/X11/XF86Config" (EE) VGA(0): Driver can´t support depth 24 (EE) Screen(s) found, but none have a usable configuration Falta server error: no screens found
[XFree86] FW: Xwindows crash
Hi, I am using Redhat 8.0 with the latest version of Xfree86 but my Xwindows is crash. I attached the log to you. Please help me. Thanks Regards, Emir Syah PT. Telemaya Asia Menara Rajawali 17th Fl. Jl. Mega Kuningan Lot 5.1 Kompleks Mega Kuningan Jakarta 12950, INDONESIA Ph. : 62 - 21 - 574 3930 Fax : 62 - 21 - 574 3931 Email : [EMAIL PROTECTED] XFree86.9.log Description: Binary data
Re: [Thinstation-developer] Re: [XFree86] Out of Memory
You've removed all the other "Load" lines from your Module section and just left the vnc.so there. The 'Load "vnc"' line should be added to your EXISTING!! Module Section not completely replaced. That's your problem. And as for the crashing, you've not read the release notes properly. The .101 release requires you to put back the original video driver from XFree86 4.3.0. Alan. On Fri, Sep 05, 2003 at 05:48:25PM +1200, Miles Roper wrote: > Hi Alan, > > Could you have a look at this, I've been trying to work out a problem with > Mark, but ran into a snitch with xf4vnc and would like your feedback. > > > when I try a > > xdpyinfo > > it doesn't show the X_Resouce extenstion > > when I do a > > xdpyinfo -ext all > > it says > > XFree-VidModeExtention extention not supported by server > SHAPE extention not supported by server > SYNC extention not supported by server > XFree86-DGA extention not supported by server > XFree86-Misc extention not supported by server > DOUBLE-DUFFER extention not supported by server > RECORD extention not supported by server > XINERAMA extention not supported by server > > now, I'm loading the vnc.so module which I've just found out is the reason > all the above extenstions aren't working. When I remove it they work. I've > just tried to upgrade to xf4vnc 4.3.0.101 to see if this fixes any problems > but now it doesn't work at all, here is my XFree86.log > > Also, a couple of people have been saying how slow Xfree seems to them, > could it be because the above extenstions aren't supported? > > Cheers > > Miles > > > -Original Message- > From: Mark Vojkovich [mailto:[EMAIL PROTECTED] > Sent: Friday, 5 September 2003 04:49 p.m. > To: Miles Roper > Cc: '[EMAIL PROTECTED]'; bingjie bingjie; > [EMAIL PROTECTED]; Thinstation-Developer > (E-mail) > Subject: RE: [Thinstation-developer] Re: [XFree86] Out of Memory > > > > > On Fri, 5 Sep 2003, Miles Roper wrote: > > > is this built as part of the XFree Binary, or is it in a seperate lib.a > > file, if so which one as I need to include this into my build. > >It looks like it's in the libextmod.a module. Perhaps you're > just not loading that module? > > Mark. > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] X with samtron 56v
Hi the problem is in your S3 SavagePro download the last driver from http://www.probo.com/timr/savage40.html ( xf43sav-27t.tgz ) and follow the instruction, is posible that you will have to change your /etc/X11/XF86Config file in "device" section add: option bios "no" Marcel >-- Mensaje Original -- >To: [EMAIL PROTECTED] >From: Deekshit M <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >Subject: [XFree86] X with samtron 56v >Date: Fri, 05 Sep 2003 11:29:58 +0600 (IST) > > >Hi all, > Recently I installed RHL 9.0 on my PC with AMD XP2400, 512MB, 80GB, >S3 SavagePro(via, onboard), Samtron 56v monitor. But I am not able to get >the X. The configuration successfully detected my graphics card, during installation. >Monitor was detected as Syncmaster. > I commented the Horizontal Sync in/etc/X11/XFree86 file. The I got my X >running but at 640x480x8Bpp resolution. > >Can anybody help me to solve this problem. > > >Regards >Deekshit M >- >Sify Mail - now with Anti-virus protection powered by Trend Micro, USA. >Know more at http://mail.sify.com > >Sify Power mail- a Premium Service from Sify Mail! >know more at http://mail.sify.com >___ >XFree86 mailing list >[EMAIL PROTECTED] >http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] S3/3026 support
Hi, On: Thu, 4 Sep 2003 13:25:41 -0700 (PDT), Alex Deucher <[EMAIL PROTECTED]> wrote: > Sorry to reply to my own message, but there is also support for the > 3026 DAC in the mga driver that could be used as an additional > reference. And so maybe factored out into the ramdac module ... > Alex Sincerely yours, René Rebe - ROCK Linux stable release maintainer -- René Rebe - Europe/Germany/Berlin [EMAIL PROTECTED] [EMAIL PROTECTED] http://www.rocklinux.org http://www.rocklinux.net/people/rene http://gsmp.tfh-berlin.de/gsmp http://gsmp.tfh-berlin.de/rene ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] How to release XNextEvent ...
Hello, I have a multithreaded application. I initialized X-Window with XInitThreads. One thread is running the main program and another one is waiting for X-events. However, some events, external to X-window ones, may, for instance, close the application. Then, I wan't to clear all threads, close X-window connection, etc ... Thus, I tried to use XSendEvent from the main thread to release the XNextEvent that is waiting the X events in the other thread. However, it seems that the event does not release XNextEvent although it appears in the queue as soon as a real event (i.e. comming from the mouse or the keyboard) occurs. How can I release XNextEvent without asking the user to move the mouse or press a key ? Friendly Damien Touraine ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
Hello I have tapped the command startx but the xwindows do not start and l receive this message: could not find font path element unix/:7100 ,removing from list ! fatal error server: could not open default font 'fixed' help me please. Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Testez le nouveau Yahoo! Mail
RE: [XFree86] X with samtron 56v
Hi, ( sorry my english ) a little mistake is in "device" section option usebios "no" The reason is that the driver is broken because S3/Via change the bios in a incompatible way to the driver, the option usebios "no" fix it Marcel MM >-- Mensaje Original -- >From: [EMAIL PROTECTED] >Subject: RE: [XFree86] X with samtron 56v >To: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >Date: Fri, 5 Sep 2003 09:31:00 -0400 > > >Hi the problem is in your S3 SavagePro download the last driver from >http://www.probo.com/timr/savage40.html >( xf43sav-27t.tgz ) and follow the instruction, is posible that you will >have to change your /etc/X11/XF86Config file > >in "device" section add: > >option bios "no" > >Marcel > >>-- Mensaje Original -- >>To: [EMAIL PROTECTED] >>From: Deekshit M <[EMAIL PROTECTED]> >>Reply-To: [EMAIL PROTECTED] >>Subject: [XFree86] X with samtron 56v >>Date: Fri, 05 Sep 2003 11:29:58 +0600 (IST) >> >> >>Hi all, >> Recently I installed RHL 9.0 on my PC with AMD XP2400, 512MB, 80GB, >>S3 SavagePro(via, onboard), Samtron 56v monitor. But I am not able to get >>the X. The configuration successfully detected my graphics card, during >installation. >>Monitor was detected as Syncmaster. >> I commented the Horizontal Sync in/etc/X11/XFree86 file. The I got my >X >>running but at 640x480x8Bpp resolution. >> >>Can anybody help me to solve this problem. >> >> >>Regards >>Deekshit M >>- >>Sify Mail - now with Anti-virus protection powered by Trend Micro, USA. >>Know more at http://mail.sify.com >> >>Sify Power mail- a Premium Service from Sify Mail! >>know more at http://mail.sify.com >>___ >>XFree86 mailing list >>[EMAIL PROTECTED] >>http://XFree86.Org/mailman/listinfo/xfree86 > > > >___ >XFree86 mailing list >[EMAIL PROTECTED] >http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Radeon 9200
Hi All who reside here, I have just purchased a Radeon 9200 grahpics card and find that the XFree86 4.3 I have installed does not in fact have that card listed in the card database. I understand from some research I have done on the XFree web sites though that it is in fact supported now! Yippee! It is the RV280 engine, but will not configure via sax2 in my SuSE 8.2 setup. Just kicks out when it can't find the card. I haven't seen any updates recently for SuSE binaries and could probably update things from XFree86 latest stable release, if I knew how! :o) In looking over all that, it didn't quite make sense to me in the way I am familar with installing, building source files. So here come the questions. Anyone running this card in SuSE or others with 4.3 presently? Is 3D supported from XFree or do you need to use the ATI drivers for that? Are there new binaries for SuSE somewhere? If not, how do you compile and install the newer stuff to use that card? Thanks for your help Patrick -- ---SuSE Linux v8.2 Pro--- Registered Linux User #225206 "Life's a garden, Dig It!" --Joe Dirt ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Radeon 9200
Radeon DRIVERS are available from yesterday at ATI web site: http://www.atitech.ca/support/drivers/linux/radeon-linux.html?type=linux&prodType=graphic&prod=productsLINUXdriver&submit.x=15&submit.y=5 I hope that they can works better than the one that XFree 4.3 already provide (in my Asus L5C they don't work, as I've posted) Bye -->-- Messaggio Originale -- -->From: The Smiths <[EMAIL PROTECTED]> -->To: XFree86 List <[EMAIL PROTECTED]> -->Reply-To: [EMAIL PROTECTED] -->Subject: [XFree86] Radeon 9200 -->Date: Fri, 5 Sep 2003 14:14:49 -0400 --> --> -->Hi All who reside here, I have just purchased a Radeon 9200 grahpics card and find that the XFree86 4.3 I have installed does not in fact have that card listed in the card database. I understand from some research I have done on the XFree web si -->es though that it is in fact supported now! Yippee! It is the RV280 engine, but will not configure via sax2 in my SuSE 8.2 setup. Just kicks out when it can't find the card. I haven't seen any updates recently for SuSE binaries and could probab -->y update things from XFree86 latest stable release, if I knew how! :o) In looking over all that, it didn't quite make sense to me in the way I am familar with installing, building source files. So here come the questions. Anyone running this -->card in SuSE or others with 4.3 presently? Is 3D supported from XFree or do you need to use the ATI drivers for that? Are there new binaries for SuSE somewhere? If not, how do you compile and install the newer stuff to use that card? Thanks f -->r your help Patrick -- ---SuSE Linux v8.2 Pro--- Registered Linux User #225206 "Life's a garden, Dig It!" --Joe Dirt ___ XFree86 mailing list [EMAIL PROTECTED] http:// -->Free86.Org/mailman/listinfo/xfree86 __ Partecipa al concorso Tiscali "collegati e vinci", il primo premio e' un viaggio per 2 persone a Zanzibar! http://point.tiscali.it/numerounico/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9200
On Fri, 5 Sep 2003 20:49:49 +0200 "Alberto Bellu" <[EMAIL PROTECTED]> wrote: > Radeon DRIVERS are available from yesterday > at ATI web site: > > http://www.atitech.ca/support/drivers/linux/radeon-linux.html?type=linux&prodType=graphic&prod=productsLINUXdriver&submit.x=15&submit.y=5 > > I hope that they can works better than > the one that XFree 4.3 already provide > (in my Asus L5C they don't work, > as I've posted) > > Bye > Thanks Alberto, I did download the driver, but I think these are for 3D capabilities, aren't they? I first have to get my card recognized and setup for the machine to run on, then I can install the drivers for 3D. Or am I mistaking the whole reason for these drivers from ATI? Regards, Patrick -- ---SuSE Linux v8.2 Pro--- Registered Linux User #225206 "Life's a garden, Dig It!" --Joe Dirt ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] How to test the ATI Radeon 9200 driver
Hi there, I'd like to test the ATI Radeon 9200 driver for XFree86. This chipset is not supported by release 4.3.0, but support for it exists in the CVS source. So I have tried to download some of the development snapshots of the CVS source which contain 9200 support (i.e., the XFree86-4.3.99.8.tar.bz2 and XFree86-4.3.99.9.tar.bz2 files) but none of them compile. So what is the best (=easiest) way for me to get or build a version of XFree86 4.3.0 that supports my Radeon 9200 chip? Thanks, Olav Reinert ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xfs crash
Hello. When I´m using mozilla oftenly xfs crashes and i must restart service xfs if I want start mozilla another time,this happen me little when I read in english or spanish,but often when read in russian or open chinese pop-ups. Any suggestion for check where is the problem?This happened me with Redhat9 and now with Redhat Taroon Beta 2 exactly the same. Thanks. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Comment about the Bug#: 561
After install Mdk 9.1 or Suse 8.2 , XFree freeze. I change the drivers in FBDEV , and it's good. But not in radeon , vesa and ati. Actually X servere works. If you attach extarnal monitor, and press + you can switch to it. And by repeting the + -- go back to the LCD screen. It's some strange problem with video outout initialization. -- Best wishes! Const. A. d'Ribin. Porta Software Ltd, System Analyst ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] How to test the ATI Radeon 9200 driver
On Fri, 5 Sep 2003, Olav Reinert wrote: > So I have tried to download some of the development snapshots of the CVS > source which contain 9200 support (i.e., the XFree86-4.3.99.8.tar.bz2 and > XFree86-4.3.99.9.tar.bz2 files) but none of them compile. What error message do you get? I've been using snapshots for a while, and they've all been fine! -- Bill Gallafent. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] RE: [Thinstation-general] Re: [Thinstation-developer] Re: [XFree8 6] Out of Memory
your right I did, although I didn't mean to :o) opps i have, as i've been using the beta 100, so the video drivers are still the orginal ones which come with xfree4.3, not the xfv4nc ones. -Original Message- From: Alan Hourihane [mailto:[EMAIL PROTECTED] Sent: Friday, 5 September 2003 10:28 p.m. To: Miles Roper Cc: '[EMAIL PROTECTED]'; bingjie bingjie; [EMAIL PROTECTED]; Thinstation-Developer (E-mail); 'Mark Vojkovich' Subject: [Thinstation-general] Re: [Thinstation-developer] Re: [XFree86] Out of Memory You've removed all the other "Load" lines from your Module section and just left the vnc.so there. The 'Load "vnc"' line should be added to your EXISTING!! Module Section not completely replaced. That's your problem. And as for the crashing, you've not read the release notes properly. The .101 release requires you to put back the original video driver from XFree86 4.3.0. Alan. On Fri, Sep 05, 2003 at 05:48:25PM +1200, Miles Roper wrote: > Hi Alan, > > Could you have a look at this, I've been trying to work out a problem with > Mark, but ran into a snitch with xf4vnc and would like your feedback. > > > when I try a > > xdpyinfo > > it doesn't show the X_Resouce extenstion > > when I do a > > xdpyinfo -ext all > > it says > > XFree-VidModeExtention extention not supported by server > SHAPE extention not supported by server > SYNC extention not supported by server > XFree86-DGA extention not supported by server > XFree86-Misc extention not supported by server > DOUBLE-DUFFER extention not supported by server > RECORD extention not supported by server > XINERAMA extention not supported by server > > now, I'm loading the vnc.so module which I've just found out is the reason > all the above extenstions aren't working. When I remove it they work. I've > just tried to upgrade to xf4vnc 4.3.0.101 to see if this fixes any problems > but now it doesn't work at all, here is my XFree86.log > > Also, a couple of people have been saying how slow Xfree seems to them, > could it be because the above extenstions aren't supported? > > Cheers > > Miles > > > -Original Message- > From: Mark Vojkovich [mailto:[EMAIL PROTECTED] > Sent: Friday, 5 September 2003 04:49 p.m. > To: Miles Roper > Cc: '[EMAIL PROTECTED]'; bingjie bingjie; > [EMAIL PROTECTED]; Thinstation-Developer > (E-mail) > Subject: RE: [Thinstation-developer] Re: [XFree86] Out of Memory > > > > > On Fri, 5 Sep 2003, Miles Roper wrote: > > > is this built as part of the XFree Binary, or is it in a seperate lib.a > > file, if so which one as I need to include this into my build. > >It looks like it's in the libextmod.a module. Perhaps you're > just not loading that module? > > Mark. > --- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ___ Thinstation-general mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/thinstation-general ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: [Thinstation-general] Re: [Thinstation-developer] Re: [XFree8 6] Out of Memory
On Sat, Sep 06, 2003 at 10:19:01AM +1200, Miles Roper wrote: > your right I did, although I didn't mean to :o) opps O.k. Glad you've got that cleared up. > i have, as i've been using the beta 100, so the video drivers are still the > orginal ones which come with xfree4.3, not the xfv4nc ones. I presume it's still crashing though ? If so, try removing your 'option "swcursor"' and let me know if that fixes it. Alan. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] How to test the ATI Radeon 9200 driver
On Fri, 5 Sep 2003 22:42:17 +0100 (BST) William Gallafent <[EMAIL PROTECTED]> wrote: > On Fri, 5 Sep 2003, Olav Reinert wrote: > > > So I have tried to download some of the development snapshots of the > > CVS source which contain 9200 support (i.e., the > > XFree86-4.3.99.8.tar.bz2 and XFree86-4.3.99.9.tar.bz2 files) but > > none of them compile. > > What error message do you get? I've been using snapshots for a while, > and they've all been fine! > > -- > Bill Gallafent. > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 = I managed to get the 9200 working with the ATI binaries, but as Olav pointed out, it would be nice to have the XFree86 drivers working. Where did you get the files to compile? I did not see the XFre86-4.3.99 files you mentioned above and is that all you need to update things? Patrick -- ---SuSE Linux v8.2 Pro--- Registered Linux User #225206 "Life's a garden, Dig It!" --Joe Dirt ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9200
On Fri, 5 Sep 2003 20:49:49 +0200 "Alberto Bellu" <[EMAIL PROTECTED]> wrote: > Radeon DRIVERS are available from yesterday > at ATI web site: > > http://www.atitech.ca/support/drivers/linux/radeon-linux.html?type=linux&prodType=graphic&prod=productsLINUXdriver&submit.x=15&submit.y=5 > > I hope that they can works better than > the one that XFree 4.3 already provide > (in my Asus L5C they don't work, > as I've posted) > > Bye === Alberto, Downloaded the ATI binary file 3.4.5 version and it works pretty well. Haven't gotten the 3D working yet, but working on that presently. Should have all running shortly I am hoping and everything happy with the new 9200 card. Can't comment on the older drivers as i did not use those prior to this. Am looking forward to having XFree86 running with it too, which I am hoping to see either by me building it or in the next version of SuSE. Patrick -- ---SuSE Linux v8.2 Pro--- Registered Linux User #225206 "Life's a garden, Dig It!" --Joe Dirt ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9200
On Fri, Sep 05, 2003 at 02:14:49PM -0400, The Smiths wrote: > I have just purchased a Radeon 9200 grahpics card and find that the > XFree86 4.3 I have installed does not in fact have that card listed in > the card database. I understand from some research I have done on the > XFree web sites though that it is in fact supported now! Yippee! > > It is the RV280 engine, but will not configure via sax2 in my SuSE 8.2 > setup. Just kicks out when it can't find the card. I haven't seen any > updates recently for SuSE binaries and could probably update things from > XFree86 latest stable release, if I knew how! :o) > > In looking over all that, it didn't quite make sense to me in the way I > am familar with installing, building source files. So here come the > questions. > > Anyone running this card in SuSE or others with 4.3 presently? Is 3D > supported from XFree or do you need to use the ATI drivers for that? > > Are there new binaries for SuSE somewhere? If not, how do you compile > and install the newer stuff to use that card? Hi Patrick, Unfortunately, Radeon 9200 support is not included in the base XFree86 4.3.0 distribution. Adding it on is a job for various distributors - Debian and Red Hat add it on, but apparently SuSE haven't. I think your best bet would be to contact your distributor directly and ask them to include Hui Yu's Radeon patchset; if they don't know where to get it, point them at me. Cheers! :) d -- Daniel Stone <[EMAIL PROTECTED]> http://www.debian.org - http://www.kde.org - http://www.freedesktop.org "Configurability is always the best choice when it's pretty simple to implement" -- Havoc Pennington, gnome-list pgp0.pgp Description: PGP signature
[XFree86] report of system crash
Whenever I try to launch xterm as a user other than root (including other members of group 'wheel'), I get the following message stream: - xauth: (argv):1: bad display name "homer.frontiernet.net:0" in "list" command Using authority file /home/dmfa/.Xauthority xauth: (stdin):1: bad display name "home.frontiernet.net:0" in "add" command Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please help. Doug ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Report to Sender
Incident Information:- Database: e:/lotus/domino/data/mail3.box Originator: <[EMAIL PROTECTED]> Recipients: <[EMAIL PROTECTED]> Subject:Re: Your application Date/Time: 06/09/2003 08:34:25 AM Message sent to <[EMAIL PROTECTED]> was quarantined because it contained banned content. Message sent to <[EMAIL PROTECTED]> was quarantined because it contained banned content. Message sent to <[EMAIL PROTECTED]> was quarantined because it contained banned content. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] xfree86 problem
hi, I have problem starting the Xserver. Please help me . Thanking you in Advance. Regards naresh XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 3 20:00:19 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 4352,5934 rev 02 class 04,01,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:1:0) Intel i810e rev 3, Mem @ 0xe000/26, 0xe400/19 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B] [4] -1 0x - 0x0009 (0xa) MX[B] [5] -1 0x - 0x (0x1) IX[B] [6] -1 0x - 0x00ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xe400 - 0xe407 (0x8) MX[B](B) [1] -1 0xe000 - 0xe3ff (0x400) MX[B](B) [2] -1 0xd800 - 0xd83f (0x40) IX[B] [3] -1 0x
Re: [XFree86] xfree86 problem
just edit the 'fixed' font out of your XF86Config file Dave On Fri, 2003-09-05 at 23:30, Naresh Deshaveni wrote: > hi, > > I have problem starting the Xserver. > Please help me . > > > Thanking you in Advance. > > Regards > naresh > > > > > > XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.18-11smp i686 [ELF] > Build Host: daffy.perf.redhat.com > > Module Loader present > OS Kernel: Linux version 2.4.18-14 ([EMAIL PROTECTED]) > (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 > EDT 2002 > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Wed Sep 3 20:00:19 2003 > (==) Using config file: "/etc/X11/XF86Config" > (==) ServerLayout "Default Layout" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Videocard0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "DevInputMice" > (**) FontPath set to "unix/:7100" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr > 00 > (II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr > 00 > (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr > 01 > (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr > 80 > (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr > 00 > (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr > 00 > (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr > 00 > (II) PCI: 00:1f:5: chip 8086,2415 card 4352,5934 rev 02 class 04,01,00 hdr > 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x - 0x (0x1) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x - 0x (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x - 0x (0x0) MX[B] > (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared) > (II) Bus 1 I/O range: > (II) Bus 1 non-prefetchable memory range: > (II) Bus 1 prefetchable memory range: > (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(0:1:0) Intel i810e rev 3, Mem @ 0xe000/26, 0xe400/19 > (II) Addressable bus resource ranges are > [0] -1 0x - 0x (0x0) MX[B] > [1] -1 0x - 0x (0x1) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe0 - 0x (0x20) MX[B](B) > [1] -1 0x001
Re: [XFree86] Need help with ATI Radeon 9200
On 06 Sep 2003 00:05:31 -0500 David Loszewski <[EMAIL PROTECTED]> wrote: > I just bought a ATI Radeon 9200, XFree86.org says that XFree86 4.3.0 > will handle any radeon card however I can't get mine to work correctly > under FreeBSD 4.8 or 5.1. The only driver I could get it to work with > is the "vesa" driver, and as you can image it looks like crap. Could > someone provide me with some inside on this problem? I'd really rather > prefer not returning this card. ATI has a driver for this card on > their list for Linux but nothing for FreeBSD. Someone out there must > have gotten this working by now. Any help you can provide would be > much appreciated. > > thx, > Dave = Dave, I just purchased this card today and am finding it a challenge as well, but thru perseverance, it came alive tonite. Man, is it sweet too, I'm liking it a lot, but I still have some bugs to work out. I went with the new ATI drivers, because even if you get it working with just XFree86, you still have to create the kernel module for 3D work. That was the part that threw me in the beginning and as it turned out, I had a buggy gcc installed. Replaced that with a known working build and off everything went. If you just want 2D for the moment, then build the latest XFree86 as I am pretty sure it works well for that. XFree developers, correct me if I am mistaken. If you want the 3D though as well, then that is only available from ATI for now, I believe. Patrick -- ---SuSE Linux v8.2 Pro--- Registered Linux User #225206 "Life's a garden, Dig It!" --Joe Dirt ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] problem with X server under redhat 8.0
i am using redhat 8.0(kernel version 2.4.18-27.8.0debug) built under i686 architecture.i have recently installed XFree86 4.3.0 on my system after which the X server is unable to start.the gcc version present on my redhat is 3.2.dripkg-1.0-4.i386.rpm is installed on my linux.the error message that popups when i run 'startx' is as follows: (EE) VGA(0):Virtual height(0) is too small for the hardware(min 1) (EE) Screen(s) found,but none have a usable configuration XIO:Fatal IO error 104 (connection reset by peer) on X server ":0.0" after 0 requests(0 known processed) with 0 events remaining. i am enclosing my XFree86 configuration file,please help me out. my Xfree86 configuration file shows: # File generated by xf86config. ## Copyright (c) 1999 by The XFree86 Project, Inc.## Permission is hereby granted, free of charge, to any person obtaining a# copy of this software and associated documentation files (the "Software"),# to deal in the Software without restriction, including without limitation# the rights to use, copy, modify, merge, publish, distribute, sublicense,# and/or sell copies of the Software, and to permit persons to whom the# Software is furnished to do so, subject to the following conditions:# # The above copyright notice and this permission notice shall be included in# all copies or substantial portions of the Software.# # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE# SOFTWARE.# # Except as contained in this notice, the name of the XFree86 Project shall# not be used in advertising or otherwise to promote the sale, use or other# dealings in this Software without prior written authorization from the# XFree86 Project.# # **# Refer to the XF86Config(4/5) man page for details about the format of # this file.# ** # **# Module section -- this section is used to specify# which dynamically loadable modules to load.# **#Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables# initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "speedo"# Load "freetype"# Load "xtt" # This loads the GLX module# Load "glx"# This loads the DRI module Load "dri" EndSection # **# Files section. This allows default font and rgb paths to be set# ** Section "Files" # The location of the RGB database. Note, this is the name of the# file minus the extension (like ".txt" or ".db"). There is normally# no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together),# as well as specifying multiple comma-separated entries in one FontPath# command (or a combination of both methods)# # If you don't have a floating point coprocessor and emacs, Mosaic or other# programs take long to start up, try moving the Type1 and Speedo directory# to the end of this list (or comment them out).# FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/"# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"# FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # **# Server flags section.# ** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may# provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals"
Re: [XFree86] xfree86 problem
On 6 Sep 2003, David Loszewski wrote: > just edit the 'fixed' font out of your XF86Config file There is no 'fixed' font in the XF86Config file. Either his font server (xfs) isn't running or the font directories included in the font server configuration (typically at /etc/X11/fs/config) don't have any directories with a font alias for 'fixed' in them. A font alias for 'fixed' is required for the server to start. Naresh, you will get over 100,000 hits if you put that error message into google. Mark. > > Dave > > On Fri, 2003-09-05 at 23:30, Naresh Deshaveni wrote: > > hi, > > > > I have problem starting the Xserver. > > Please help me . > > > > > > Thanking you in Advance. > > > > Regards > > naresh ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] problem with X server under redhat 8.0
On Sat, 6 Sep 2003, [iso-8859-1] bharat tumuluru wrote: > i am using redhat 8.0(kernel version 2.4.18-27.8.0debug) built under i686 > architecture.i have recently installed XFree86 4.3.0 on my system after which the X > server is unable to start.the gcc version present on my redhat is > 3.2.dripkg-1.0-4.i386.rpm is installed on my linux.the error message that popups > when i run 'startx' is as follows: > You are using the wrong driver. Change Driver "vga" to Driver "i810" Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] help me to get graphical display
Dear sir, Please help me to get graphical display on my system which is redhat linux 9 installed. expecting your early reply. Thanks with regards L. Francis The following is the result of ddcprob result Videocard DDC probe results Description: Intel Corporation i810 Graphics Controller Memory (MB): 1 Monitor DDC probe results ID: WIP6718 Name: A5-WIPRO Horizontal Sync (kHZ): 30-54 Vertical Sync (HZ): 50-120 Width (mm): 280 Height (mm): 210 And also i have attached the /var/log/XFree86.0.log file XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep 6 11:38:09 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Intel 810" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (WW) Warning, couldn't open module pcidata (II) UnloadModule: "pcidata" (EE) Failed to load module "pcidata" (module does not exist, 0) Fatal server error: Unable to load required base modules, Exiting... When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] Email sent using Svcemail Visit us at http://www.svce.ac.in XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep 6 11:38:09 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Intel 810" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class:
[XFree86] Need help with ATI Radeon 9200
I just bought a ATI Radeon 9200, XFree86.org says that XFree86 4.3.0 will handle any radeon card however I can't get mine to work correctly under FreeBSD 4.8 or 5.1. The only driver I could get it to work with is the "vesa" driver, and as you can image it looks like crap. Could someone provide me with some inside on this problem? I'd really rather prefer not returning this card. ATI has a driver for this card on their list for Linux but nothing for FreeBSD. Someone out there must have gotten this working by now. Any help you can provide would be much appreciated. thx, Dave ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86