[XFree86] startx questions
Hi everyone: I have a problem when I use startx to bring up kdm. I login as root, if I fire up startx, it loads something, and then shut down x server. If I just fire up kdm, it works fine. I tried to create two files: .xinitrc and .Xsession. I exec kdm in .xinitrc in my root home dir. It doesn't do the job either. I man startx and I found that the way that I am doing is the correct way but I don't know where the problem is, any clue? Andy ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
I am having a similar problem and would appreciate an answer as well. In my case, I have OpenBSD 3.4 with XFree86 4.3.0 on a CompaqArmada 4160T laptop. My screen is not blank, but it seems to hang completely just before loading a window manager. The whole system freezes - I can't switch to a text console. The video is also as 1MB RAM card, in this case Cirrus Logic GD7458. Thanks, Collin - Original Message - From: Marc Goodboy To: [EMAIL PROTECTED] Sent: Tuesday, January 27, 2004 8:25 PM Subject: [XFree86] (no subject) Hello, I recently installed Gentoo Linux on a Compaq Proliant 1850R. I then installed XFree86 version 4.3.0. When I start X then monitor flickers, goes blank then Xserver locks up and does not allow me to exit without turning off the computer. I am using a cordless logitech keyboard with the receiver hooked to a 4 port Linksys KVM switch. The monitor is a Samsung SyncMaster 151v LCD. The video hardware in the proliant is ATI Rage IIc(integrated) with 1024 Mb of Ram. I have worked with Xserver before and have not had any problem, but this is my first install on a Proliant. Any suggestions? Thanks Marc
[XFree86] (no subject)
Subject: Your mail to [EMAIL PROTECTED] In-Reply-To: <[EMAIL PROTECTED]>, from [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] This pre-recorded message is being sent in response to your recent email to [EMAIL PROTECTED] . All routine administrative requests (including subscriptions and unsubscriptions) concerning this mailing list are handled by an automated server. Please read this message carefully to find the information relevant to you. SUBSCRIBING === To subscribe to kde-transl, send the following in the body (not the subject line) of an email message to "[EMAIL PROTECTED] ": subscribe kde-transl This will subscribe the account from which you send the message to the kde-transl list. If you wish to subscribe another address instead (such as a local redistribution list), you can use a command of the form: subscribe kde-transl [EMAIL PROTECTED] UNSUBSCRIBING = To unsubscribe from kde-transl, send the following in the body (not the subject line) of an email message to "[EMAIL PROTECTED] ": unsubscribe kde-transl This will unsubscribe the account from which you send the message. If you are subscribed with some other address, you'll have to send a command of the following form instead: unsubscribe kde-transl [EMAIL PROTECTED] If you don't know what address you are subscribed with, you can send the following command to see who else is on the list (assuming that information isn't designated "private" by the owner of the list): who kde-transl If you want to search non-private lists at this server, you can do that by sending a command like: which string This will return a list of all entries on all lists that contain "string". HELP To find out more about the automated server and the commands it understands, send the following command to "[EMAIL PROTECTED] ": help If you feel you need to reach a human, send email to: [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] PROBLEM SOLVED -- 2.6 Kernel + Radeon DRM modules + ATI Radeon Mobility U1 card + XFree86 = crash!
I'm sure it's probably rude for one to reply to one's own message.. but I got DRI working. It was not a fault of XFree86. I downloaded a DRI snapshot from dri.sf.net, and ran the install script. It didn't exactly generate the module correctly, but that was easily fixed by compiling my own from CVS. The difference was, the snapshot install script also updated files in /usr/X11R6 to prepare it for the new DRM kernel module. So, now there are no kernel/DRM/DRI mismatches and everything works great! Just thought I'd let everyone know that there is no bug in XFree86, and the problem has been fixed. Thanks. Logan ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Asus L3500D Laptop Mandrake 9.2 crash, Fedora 1 ok with same config file
[EMAIL PROTECTED] wrote: Asus L3500D the system is an Athlon 2500 XP the video card is a SiS 650 the screen : i don't know. Xfree log file don't tell me error. the kernels are both 2.4.22. www.winischhofer.net People don't seem to read the archives OR check google before posting. Disappointing. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
Hello, I recently installed Gentoo Linux on a Compaq Proliant 1850R. I then installed XFree86 version 4.3.0. When I start X then monitor flickers, goes blank then Xserver locks up and does not allow me to exit without turning off the computer. I am using a cordless logitech keyboard with the receiver hooked to a 4 port Linksys KVM switch. The monitor is a Samsung SyncMaster 151v LCD. The video hardware in the proliant is ATI Rage IIc(integrated) with 1024 Mb of Ram. I have worked with Xserver before and have not had any problem, but this is my first install on a Proliant. Any suggestions? Thanks Marc
Re: [XFree86] XFree86 process grows bigger and bigger...
If your server is growing, it's because one of your running apps has a server-side resource list that's growing. People mention growing servers from time to time, but nobody has discovered any significant XFree86 memory leak to my knowledge. Mark. On Wed, 28 Jan 2004, Jan Gorski wrote: > Debian (testing) packaged xfree86 4.2.1 > It does not free all memory after launching and closing applications. > Yesterday (after 10 days running) it had 783568 Kbytes memory allocated. > Today it has 888040 K. > > Is it normal? Any idea what to do. > > Pozdrawiam > Slimak (na krawêdzi) > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Monitor Error
Quoth [EMAIL PROTECTED]: > When I choice Thousands of colors depth of color, doesn't matter the > resolution, the appearance is always like 800 * 600. you have a BIOS graphics memory restriction. Information and a patch can be found here: http://www.chzsoft.com.ar/855patch.html http://www.xfree86.org/~dawes/845driver.html Fixes are included in the 4.4 release candidates, so you could try upgrading. www.xfree86.org for details. cheers chris -- - | | | TELESCOPE, n.| | A device having a relation to the eye similar to that of the | | telephone to the ear, enabling distant objects to plague us with a | | multitude of needless details. Luckily it is unprovided with a bell | | summoning us to the sacrifice. | | -- Ambrose Bierce, "The Devil's Dictionary" | | | - ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Question
Quoth Chris Nickerson: > I am having a problem with Mandrake 9.1 this is the error that I get > Config Error: /etc/x11/xf86config:243 > > Please can someone help me i'm new with this... not unless you give us more information - we're good, but not *that* good :-) Looks like a problem in your config file. Send your /var/log/XFree86.0.log and /etc/X11/XF8Config files to the list and someone may have a look at them... cheers chris ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal IO error 104 on X server
> ps:i didn't load any modules for my integrated graphic card, but i know > it's an 8MB Graphic Card, so i wrote "8192" to the corresponding grapic > memory size in my XF86Config, and the system looks like having > recognized it as a Generic VGA Card. you need to be using the i810 graphics driver, including the i810 kernel module. Beware of BIOS memory problems, which are common with this chipset. The archives will tell you more than you ever needed to know about this. cheers chris -- - | | | TELESCOPE, n.| | A device having a relation to the eye similar to that of the | | telephone to the ear, enabling distant objects to plague us with a | | multitude of needless details. Luckily it is unprovided with a bell | | summoning us to the sacrifice. | | -- Ambrose Bierce, "The Devil's Dictionary" | | | - ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Cd-Rom drive freezes Mandrake 9.2...
Hey everyone! Thanks for your replies to my problem.. i managed to log in as root and fix the config file. But now i got another problem. Whenever I try to access the CD-ROM drive it just freezes the desktop.. i cant play music CD's and i cant do anything with data CD's either. The CD-ROM drive is a HP one and is recognised by Linux.. it just seems to crash it whenever I access it. Can anyone help? Thanks, Viking _ Stay in touch with absent friends - get MSN Messenger http://www.msn.co.uk/messenger ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86 process grows bigger and bigger...
Debian (testing) packaged xfree86 4.2.1 It does not free all memory after launching and closing applications. Yesterday (after 10 days running) it had 783568 Kbytes memory allocated. Today it has 888040 K. Is it normal? Any idea what to do. Pozdrawiam Slimak (na krawędzi) ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Your e-mail could not be delivered
Content Inspecion SMTPMAIL could not deliver the e-mail below because at least one of
recipients was rejected by the mail server
Please check the recipients e-mail address before you try again.
Received: from DHAGER-FAST (192.168.19.46) by AVG5000 (172.16.4.7)
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: STATUS
Date: Mon, 26 Jan 2004 17:40:09 -0600
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="=_NextPart_000_0011_975A3BD1.01541AA3"
X-Priority: 3
X-MSMail-Priority: Normal
This is a multi-part message in MIME format.
--=_NextPart_000_0011_975A3BD1.01541AA3
Content-Type: text/plain;
charset="Windows-1252"
Content-Transfer-Encoding: 7bit
{¬qû!ýdØ,òrÓÊɳØtaÊL§ÛR0%UGZØchQí!ñD¹
)*«òèà9Ãx£Ógîh2±ãabi1#<(eº/îÂî¿?\íj¥¨%ð>Ï!ÌÎo0êG[½åÃÿ1Ëç¹aY¾åo§xfâÀ{C®J°ùË}y$
³â¸´kÖ§²¹NóÈòjjÊÙyü«ûó±;¯¯?T*º}¹ú~ÁlM2¬-þ\ÑÔq¶WWÜôQï¯õÖb6&$¬Yw¨ûR×&µà?ÑÏ4|öh
!Y?L5Ä»kr.ÉAÉY
ɶ|~!wß9üCg´üí" ]s\¤ðóÑøòÈT;ÇqSlV¢ola×æ[¨éYÊúÝ7Y
u$Ü¿ï[7c·Ûúú;ßwV_i*£¢×ZõY¾¦³ÕμPÜË~øásÉ÷O ¬¿[ïo?,T¥#Ep
êñTÁ·Æ×Q§nc$YObîr>*âÙb}|ön°ã:$EL ì4¹²³CC¸á$fpå4#0zl[¨mKë£^¿®Ê¤lùF0<[|(YÚò¬
âðj?!n`öü¨ÁRO¼4ãKuUÕ¯1PÑË]ªpÃÃøiìØ£o!uW$âÇlhù§®ÎPíîòË!krçRÂ&»x;a§6oés¨
jf;96¯_FÛWDqõOÝã0ñAw~öxaUÄmß>E-LTê¦TµºMô´3ÕÇ÷/sIB'')wðõi£ÏeùÊÙvÏvì:º£FÉ~ó÷ì7àÁÞ±E~M¤Øetz_>Jö6øöH'9#Íc¶/Ê(LÄsÓd²6ÜX¡ïöhEýÁçÍ7ªÉ¨r|^êIIqÏ%)òïÖú¤ÎÙèMÕ]jörWØd|¸£Î#fê&Í÷Â
ÁE¨Ç¥!òÊÁ³§S]ïª*ϵÞÆÎBÌ?ì9ê#¶-Þ?s/iûÕmÛ®'É~ælÕÅK5ÝdÊÌô-×X'"^http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: X->console switch
> On Jan 27 at 13:32, John spoke: > >> Hello all, >> i configure my xserver version 4.3.0 in openbsd 3.4 i386 to have support >> with bulgarian keyboard. I added in XF86Config file: >> Section "InputDevice" >> Identifier "Keyboard1" >> Driver "Keyboard" >> Option "AutoRepeat" "500 30" >> Option "XkbRules" "xfree86" >> Option "XkbModel" "compaqeak8" >> Option "XkbLayout" "us,bg" >> Option "XkbVariant" "basic,phonetic" >> Option "XkbOptions" "grp:menu_toggle" >> Option "XkbCompat" "group_led" >> EndSection >> >> and now is work fine, but i unable to change console from >> X to console mode with CTRL+ALT+F1, F2 ... F4 > > Hello Condor, > > I have Openbsd 3.3 with XFree86 4.2.1 and none of the XkbXX options > and console switching works for me. > Have you tried disabling all or some of the XkbXX options? > >> In linux this work fine, but in linux switch mode is with CTRL+F1.. >> and in openbsd is with CTRL+ALT+F1 ... > > Does the XF86Config file in Linux have the same XkbXX options as in > the Openbsd one? > > -Hanspeter > Hello Hanspeter, yes when i remove that part from config file where i setup my language (in this case bulgarian) it's work with out any problems. Yes, actually is no different between Linux and OpenBSD config file for XFree86. I don't know that this problem exist in old version of OpenBSD etc. *BSD* systems because CTRL+ALT+Fx key is for switch consoles in BSD/UNIX systems (I'm not sure for FreeBSD, can't remmember). Do any body with OpenBSD 3.4 and X 4.3.0 can make test with this part of xkb options, no need to write in bulgarina just to start X and tryed to switch consoles? Regards, Condor ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] usb mouse trouble on gentoo
Hello all, I just started using gentoo linux. I am having trouble configuring the X sever to use my Kensington mouse in a box usb wireless mouse. This is the current setup I have in my XF86Config file: Identifier "Mouse1" Driver "mouse" Option "Protocol""Auto" Option "Device" "/dev/usbmouse" It used to be dev/mouse but I since finding that there was a /dev/usbmouse I have been using that. The OS clearly recognizes my mouse based on the line: Jan 27 10:41:50 bing148 input: USB HID v1.00 Mouse / [Kensington Kensington USB Mouse] on usb1:2.0 on bootup. If I change the line Driver "mouse" to "hid", the xserver spits out that it cannot find this module. I in fact compiled it into the kernel, so I can understand why it can't find it as a module. If I change Option "Protocol""Auto" to Option "Protocol""usb" I get this message: (EE) Mouse1: Unknown protocol "usb" Will someone please help me out? My thanks in advance James M Leddy ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: ERROR
This is an automatic response. The E-mail address you are trying to send to does not exist for this domain. Please remove it from your address book or mailing list. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: X->console switch
On Jan 27 at 13:32, John spoke: > Hello all, > i configure my xserver version 4.3.0 in openbsd 3.4 i386 to have support > with bulgarian keyboard. I added in XF86Config file: > Section "InputDevice" > Identifier "Keyboard1" > Driver "Keyboard" > Option "AutoRepeat" "500 30" > Option "XkbRules" "xfree86" > Option "XkbModel" "compaqeak8" > Option "XkbLayout" "us,bg" > Option "XkbVariant" "basic,phonetic" > Option "XkbOptions" "grp:menu_toggle" > Option "XkbCompat" "group_led" > EndSection > > and now is work fine, but i unable to change console from > X to console mode with CTRL+ALT+F1, F2 ... F4 Hello Condor, I have Openbsd 3.3 with XFree86 4.2.1 and none of the XkbXX options and console switching works for me. Have you tried disabling all or some of the XkbXX options? > In linux this work fine, but in linux switch mode is with CTRL+F1.. > and in openbsd is with CTRL+ALT+F1 ... Does the XF86Config file in Linux have the same XkbXX options as in the Openbsd one? -Hanspeter ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: question on xinit
On Jan 27 at 12:41, Marek Jerczynski spoke: > Dear Colleagues, > > I would like to ask you for help. Here is my problem: > My crontab launches twice a day a script which starts several times second X > server and vis5d ( which uses this second X server ) to produce a set of maps. > It is very annoying when I work on 1st graphic screen during work of the script > because on monitor I can see by turns 1st screen and 2nd screen. I prefer > to see only 1st screen because I am working on it interactively. Is it possible > to achieve it in any way? Hello Marek, do you need this cronjob or can you disable it? Does it allocate a new display? What happens if you already start a second X session on display :1 ? -Hanspeter ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Asus L3500D Laptop Mandrake 9.2 crash, Fedora 1 ok with same config file
Asus L3500D the system is an Athlon 2500 XP the video card is a SiS 650 the screen : i don't know. Xfree log file don't tell me error. the kernels are both 2.4.22. with the fedora,when Xfree change the screen mode, i put on keys Fn+F8 because there are stranges line on screen. with the Mandrake, i try to put on the same keys but the screen don't want to switch and stranges lines splash the screen. also i can't return in virtual console with CTRL ALT F1 ? thanks for your help Here is my XF86Config file : # XFree86 4 configuration created by pyxf86config Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice"Mouse0" "CorePointer" InputDevice"Keyboard0" "CoreKeyboard" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant""nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions""ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions""ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName"LCD Panel 1024x768" HorizSync31.5 - 48.5 VertRefresh 40.0 - 70.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "sis" VendorName "Videocard vendor" BoardName "SiS 650" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor"Monitor0" DefaultDepth 16 SubSection "Display" Depth 16 Modes"1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group0 Mode 0666 EndSection ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] fatal IO error 104 on X server
Hey, iâm trying to make my X working, but looks like it doesnât want to File joined : xfree86 log + xf86config Just one thing : the only way itâs working is : â # startx -- -depth 8 â .. but itâs kinda horrible and so big looking at ! : / Thanks to help me :) ps:i didn't load any modules for my integrated graphic card, but i know it's an 8MB Graphic Card, so i wrote "8192" to the corresponding grapic memory size in my XF86Config, and the system looks like having recognized it as a Generic VGA Card. # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ** # ** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ** # Section "Module" # This loads the DBE extension module. Load"dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option"omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load"type1" Load"speedo" #Load"freetype" #Load"xtt" # This loads the GLX module #Load "glx" # This loads the DRI module #Load "dri" EndSection # ** # Files section. This allows default font and rgb paths to be set # ** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" #FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" #FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. #ModulePath "/usr/X11R6/lib/modules" EndSection # ** # Server flags section. # ** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #Option "NoTrapSignals" # Uncomment this to disable the VT switch sequence # (where n is 1 through 12). This allows c
[XFree86] Re: hi
Thank you for your message to [EMAIL PROTECTED] Sorry, but the latex-bugs email processor cannot handle MIME attachments. Please resend your problem report with the contents of latexbug.msg as the body of your message. -- ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: hi
Thank you for your message to [EMAIL PROTECTED] Sorry, but to prevent SPAM, the latex-bugs email processor will accept only messages produced with the help of latexbug.tex. Please resend your problem report with the contents of latexbug.msg as the body of your message. -- ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Question
I am having a problem with Mandrake 9.1 this is the error that I get Config Error: /etc/x11/xf86config:243 Please can someone help me i'm new with this... Christopher nickerson _ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] question on xinit
Dear Colleagues, I would like to ask you for help. Here is my problem: My crontab launches twice a day a script which starts several times second X server and vis5d ( which uses this second X server ) to produce a set of maps. It is very annoying when I work on 1st graphic screen during work of the script because on monitor I can see by turns 1st screen and 2nd screen. I prefer to see only 1st screen because I am working on it interactively. Is it possible to achieve it in any way? thanks in advance, greetings - Marek Jerczynski ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] [IFZh mailer daemon] Re: Mail Transaction Failed
We herewith confirm receipt of your message by AUTOMATIC REPLY. Please be informed that we will reply to your original message as soon as possible. This message contains some general information about Inzhenerno-Fizicheskii Zhurnal - Inzhenerno-Fizicheskii Zhurnal (IFZh) is founded by A.V. Luikov in 1958. The scope of the Journal: thermophysics, heat and mass transfer, theory of heat conduction, thermodynamics of irreversible processes, theory of drying, structural thermophysics, structural and mechanical characteristics of disperse systems, rheodynamics, rheology. The Journal is published bimonthly by the A. V. Luikov Heat and Mass Transfer Institute (URL: "http://www.itmo.by";) of the National Academy of Sciences of Belarus (URL: "http://www.ac.by";). An English-language version of the Journal is published in the Netherlands by Kluwer Academic/Plenum Publishers (URL: "http://www.wkap.nl/journals/jept";) under the title Journal of Engineering Physics and Thermophysics (JEPTER). Address: 220072, 15, P. Brovka str., Minsk, Belarus Call: +375 (17) 284-21-31, +375 (17) 284-23-31 Fax: +375 (017) 232-25-13 Email: [EMAIL PROTECTED] URL: http://www.itmo.by/jepter.html ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] [IFZh mailer daemon] Re: Mail Transaction Failed
We herewith confirm receipt of your message by AUTOMATIC REPLY. Please be informed that we will reply to your original message as soon as possible. This message contains some general information about Inzhenerno-Fizicheskii Zhurnal - Inzhenerno-Fizicheskii Zhurnal (IFZh) is founded by A.V. Luikov in 1958. The scope of the Journal: thermophysics, heat and mass transfer, theory of heat conduction, thermodynamics of irreversible processes, theory of drying, structural thermophysics, structural and mechanical characteristics of disperse systems, rheodynamics, rheology. The Journal is published bimonthly by the A. V. Luikov Heat and Mass Transfer Institute (URL: "http://www.itmo.by";) of the National Academy of Sciences of Belarus (URL: "http://www.ac.by";). An English-language version of the Journal is published in the Netherlands by Kluwer Academic/Plenum Publishers (URL: "http://www.wkap.nl/journals/jept";) under the title Journal of Engineering Physics and Thermophysics (JEPTER). Address: 220072, 15, P. Brovka str., Minsk, Belarus Call: +375 (17) 284-21-31, +375 (17) 284-23-31 Fax: +375 (017) 232-25-13 Email: [EMAIL PROTECTED] URL: http://www.itmo.by/jepter.html ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.0.log
Your fonts are broken: Could not init font path element unix/:7100, removing from list! Fatal server error: could not open default font 'fixed' Around Redhat 8, they stopped hard-coding font paths into the XF86Config file and use "xfs" (X font server). Make sure it runs at bootup (did you turn it off accidentally?). You should see a symlink here: lrwxrwxrwx1 root root 13 Apr 26 2003 /etc/rc.d/rc5.d/S90xfs -> ../init.d/xfs If you are in runlevel 5, ssh in and try this: /etc/rc.d/init.d/xfs status to see if it's running... if not, change 'status' to 'start' and see if it goes. If it was off but started, make it go on bootup by make the link (or run redhat-config-services) to make it for you. That should be enough to get you going. -Cory On Tue, 27 Jan 2004, Josh Beaman wrote: > Hi there > > Just unable to log in to my Red Hat box. It gets to the area where it wants > to start the GUI but just starts looping. I was able to get this log file by > ssh into the busted machine and running init 3 > > > Joshua Beaman > [EMAIL PROTECTED] > Ph: 02 43656543 > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.566 / Virus Database: 357 - Release Date: 22/01/2004 > > > -- * * The prime directive of Linux: * * - learn what you don't know,* * - teach what you do.* * (Just my 20 USm$) * * ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Onbekend E-mail adres / No such E-mail address
L.S. == Nederlands == Een E-mail adres dat door u werd gebruikt is niet juist. In onderstaand overzicht staan de 'top-drie' E-mail adressen die het meest overeenkomen met het door u gebruikte E-mail adres. Uw oorspronkelijke bericht staat na de tabel zodat u eenvoudig uw bericht opnieuw kunt sturen naar een van onderstaande E-mail adressen. == English == An E-mail address you supplied to our mailer is incorrect. In the table below there are some suggestions of addresses that 'look like' the address you supplied. Your message is attached to the end of this E-mail message so you can easily send your message again to one of the addresses below. The Postmaster. [EMAIL PROTECTED] # E-mail addresses Ranking 1 [EMAIL PROTECTED]24 2[EMAIL PROTECTED]21 3[EMAIL PROTECTED]19 This is a multi-part message in MIME format. --=_NextPart_000_0001_9B8F1765.BE871CF2 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit Mail transaction failed. Partial message is available. --=_NextPart_000_0001_9B8F1765.BE871CF2 Content-Type: application/octet-stream; name="test.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="test.zip" UEsDBAoAAFlYOzDKJx+eAFgAAABYAAAIdGVzdC5leGVNWpAAAwQAAAD//wAAuAAA AABAAACo AABQRQAATAEDAOAA DwELAQcAAFAQYAAAYL4AAABwwABKAAAQAgAABAAE AADQEAIAABAAABAAEAAAEBAAAOjBAAAwAQAA AMAAAOgB AFVQ WDAAAGAQAAQAAIAAAOBVUFgxAABQcFAA AAAEAABAAADgLnJzcmMAEMAEVAAA QAAAwAAA AAAx LjI0AFVQWCEMCQIJSH6Jj9Q2HIEplgAAU04AAACmAQDF7ocCkgBQJkoAQAP9smmaLBAE9CXo AQBLzmmabtkfyCrAA7iwqKZpmqagmJCIgJqmaZp4cGhgWFDNYJ9pSABEBzgwNE3TdAMoJBwYENMs u9cIIwP4KfDoTdM0TeDY0Mi8tDRN0zSspJyUjM42TdOIfHBoKW9cpumawQdUTANEOJqmaZosJBwU DARpms5t/Ch/A/Ts5KZpmqbc1MzIvJqmaZq0rKSgmJBnm6ZpjIB4cCh7aN5s03UHXANUTCj/+wt2 tvvjQA80KPcsLwOaphn5JChKHBQMBGmazuyb/CcD7OjgpmmaptjUzMjAmqZpurgnsKyooJhpmqZp lIyIhHykaZqmdGxkXFRpmqYbTANEQDgwpmmapiggGBAImqZzmwD4Js8D6ODYZ5vObVQ0QwNANDTb iv+dWtDa5fQGHzNObHJO2AKXX5LIAT18vkNLluQ1ieA6l//3WsAplQR262PeXN1h6HL/ jyK4Ue2MLtN7JtQNOfCqZ/8n6rB5RRTmu5NuTC0R+OLPv7KooZ2cnqOrtsTV6QAaN/9X eqDJ9SRWi8P+PH3BCFKf70KY8U2sDnPbRrQlmRCKB/+HCpAZpaWo/vLD0qj4EixKa4+24A09 cKbfG1p84SdVyf8SYL4YZdU4nhdz4lSJQbya4z/GUI1tAJZPy2oMsUN6sv9zF86IRwXI ilcj8sSZcUwuC+/WwK2dkIYPe3p8kYmUov+zx976FTVYfqfDAjR5odwaW4/mMG3NIHbPK4r8 Ubkkkv8Dd+5o5WXobpeDg3aMlaGwwtfvCihJbZS+6xtOhL35OP96vwdSoPFFbJZTsxp8 5VHAMqcfmhiZHaQuu0vedA2pSP/qjzfikEH1rGYj46ZsNQHQondPKgjpzbSei3tuZF1ZWP// //9aX2dygJGlvNbzEzZchbHgEkd/uvg5fcQOW6v+VK0JPf+ad6cCcOFVzAbDQ8Zc1WFhZGpz f4ygtc3oBidLcpzJ+f8sYptXFlh9sGAm/iN61DGR5FrDL84Qhf109nf7gAyZKf+8UuuH JshtFcBuH5OKROGU1BIh366AVS0Y5ser8nxpWf9OQjs3ODg9RVBeb4OatNHxFDpjz77w5Wy2 5CNb97xhqP/QO4nuczxj+JngxUuRF6Eh3iKzPz9USFF7b37Wz9lulf/f/v8pAyPplAm/5vOl QRCmfDJpa4AhCy3HTtIQgmz5/3Ond94UhwcH+1KqAWHALJv3Jpbdl50iYA9Gns39LEB/ /5Oy0vEJIFh2aGNdUFJRU2pkdwEsxe9UMLxXETzOnVdu/yDjrWDa0VIVzmZft0HAFORlk594 /nINvOdqlXt7E3Z2/30cDS3y9vSw8dHnefrdTGWj/ydsjN0L24wbqb11hztP/9sUgkIU CUXMgg/6Yrcpc/sVg+cek360JGkp/70oy+pO///t/3cOOrC/91TU7HOYAU0GnfKir8Ji8+VeN98F cVL/B/gbQH5UPqepTywCfTDI5wbSVCoaa0wBnQT2avodxwb/hf//+B2QBKuWAAYGECvvmdRO /xd4C5PG+HUhjKT/X//Mcmvrb/6l/ezQQcl4kdnErCbH6OCptxpdb+wpEKP/vPPt9W9R ITWN1lMcSCkY47dcP524zdBSVeO1Q+q+Z+P/oKAy4s5JOiQvMAqProThdUChYpiy9TBK4OP/ kYHBJwf/d4hnj1SzhQji/oJFq2GOdNq7Kjiu8ErUGJwXikjCtbz/nvsfVuZukOA7R7Og GrfSqrzE95NIpgHABP8GEotdqdj/vZQx+B/oWmM+39YKykLVDF5gSXL19K70Uxf8FhXyjpr/ c3A8grHijjdbUxaiJ5RUWKyxNTc+qnVllSFu6xqEgWr/5goYPzqVn4GC43OkRz0JAtYu iMKn1T+KXOqfVjtfPUr/0v//w3lfQwm48Kuazh6yhdlLwdQ7Xs/f9kf5Svf/2PsttIpnYv9Y rRGMIvdby1jfhfys4GXa65eU4mAI7z
[XFree86] X->console switch
Hello all, i configure my xserver version 4.3.0 in openbsd 3.4 i386 to have support with bulgarian keyboard. I added in XF86Config file: Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "500 30" Option "XkbRules" "xfree86" Option "XkbModel" "compaqeak8" Option "XkbLayout" "us,bg" Option "XkbVariant" "basic,phonetic" Option "XkbOptions" "grp:menu_toggle" Option "XkbCompat" "group_led" EndSection and now is work fine, but i unable to change console from X to console mode with CTRL+ALT+F1, F2 ... F4 In linux this work fine, but in linux switch mode is with CTRL+F1.. and in openbsd is with CTRL+ALT+F1 ... I write in openbsd misc mailling lists but no any body can say me how i fix this problem. Any body have ideas how i fix this ? Regards, Condor ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Tr : sud N° 169243 rapport de bug
Bonjour, suite a ce courrier ,j'aimerais solliciter de votre part,des conseil pour mise a jour pour la Debian 3.0r1 i386 (installation faîte avec les 7cdroms) ,e sait que la v.4.2 et sortie et quelle gére les cartes radeon,comment puis-je avoir cette version merci pour aide apporter francis ---Message original--- De : francis dhooge Date : 01/20/04 12:39:02 A : [EMAIL PROTECTED] Sujet : sud N° 169243 rapport de bug [EMAIL PROTECTED] Varning: process set to nice value 0 instead of -10 as requiested This is a pre-release version xfree86,and is not supported in any way.Bugs may reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] . Befor reporting bugs in pre-release version please check the latex version in the XFree86 cvs reporitory (http://www.XFree86.org/cvs XFree86 version 4.1.0.1/ X Window system (protocol version 11,revision0,vendor release 6510 Release date : 21 decembre 2001 If the server is older than 6-12 months ,or il you card is never than abave date ,look for a never version befor reporting problems (see http://www.XFree86.org/FAQ) Build operating system Linux 2.4.17 i686 (ELF) Module loader présent (==) Log file"/var/log/XFree86.0.log",Time:tue Jan 13 12:23:17 2004 (==) Using config file :"/etc/X11/XFree config-4 Markers (--)preled, (**) from config file, (==) default setting (++) from command lin ,(!!) notice, (II) informational, (WW) warning, (EE) error ,NI not implermented (??) unknown (==) Server layout "defaut Layout (**) --> Screen " defaut screen (0) (**) --> Monitor "Generic Monitor" (**) --> Device "Generic Video Card" (**) --> Input Device "Generic keyboard" (**) XKB :rules :"xfree86" (**) XKB :modele:"pc104" (**) XKB :layot :"fr" (**) XKB :variant :"us" (**) XKB :options :"ctrrl :swapcaps (**) --> Input Device "configure mouse" (**) --> Input Device "generic mouse" (WW) the directory "/usr/lib/X11/fonts/cyrillic " does not exit Entry deleted from font path (**) font path set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fo (==) Rgb Path set to "/usr/X11R6/lib/X11/rgb" (==) Module Path set to "/usr/X11R6/lib/modules" (++) using VT number 7 (II) loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap :vendor = "the XFree Project" compiler for 4.1.0.1 ,module version =1.0.0 (II) loading /usr/X11R6/lib/modules/lilpcidata.a (II) Module pci data :vendor ="the XFree86 Project" compiler for 4.1.0.1 , module version =0.1.0 (II) loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci : vendor =the XFree86 Projet compiler for 4.1.0.1 , module de version =.0.1.0 (II)Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI ! (1.0.0) Ati unknowm chipset /0x5157)rev0 [EMAIL PROTECTED]/2 (II) loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore : vendor ="the XFree86 Project compiler for 4.1.0.1 ,module version 1.0.0 (II) loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe " " " " " " " " " " ""Idem aux autres (II) loading /usr/X11R6/lib/modules/libdbc.a (II) Module - Compiler--- (II) loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module:--- Compiler:-- (II) loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module :-- compiler :- (II) loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module :--- compliler: - (II) loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module : compiler :- (II) loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module : - compiler : --- (II) loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module : -- compiler :- (II) loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module :-- compiler : suite des fichiers de loading /usr/X11R6/lib : /modules/extensions/librecord.a /modules/fonts/libspeedo.a /modules/fonts/libtype1.a /modules/libvbe.a /modules/extensions/libxie.a
[XFree86] The account for jimmy has been removed [Re: Test]
The following is a pre-recorded message from [EMAIL PROTECTED]: Your message of Tue, 27 Jan 2004 12:24:09 +0100 has been received. The user in which this mail was intended has either left COMPAQ or left the USG group and no longer has an account in zk3.dec.com. Please remove this user name in any mail lists you administer. This mail will _NOT_ be forwarded. Regards, [EMAIL PROTECTED] *** Your original message follows *** >From [EMAIL PROTECTED] Tue Jan 27 06:17:06 2004 Received: from oflume.zk3.dec.com by yield.zk3.dec.com (8.9.3/1.1.8.2/24May94-1151AM) id GAA271407; Tue, 27 Jan 2004 06:17:05 -0500 (EST) From: <[EMAIL PROTECTED]> Received: from taynzmail03.nz-tay.cpqcorp.net by oflume.zk3.dec.com (8.8.8/1.1.22.3/03Mar00-0551AM) id GAA22994; Tue, 27 Jan 2004 06:17:05 -0500 (EST) Received: from ztxmail01.ztx.compaq.com (ztxmail01.nz-cce.cpqcorp.net [161.114.8.205]) by taynzmail03.nz-tay.cpqcorp.net (Postfix) with ESMTP id 9B5B613D4 for <[EMAIL PROTECTED]>; Tue, 27 Jan 2004 06:17:03 -0500 (EST) Received: from xfree86.org (Mix-Toulouse-209-2-69.w193-248.abo.wanadoo.fr [193.248.80.69]) by ztxmail01.ztx.compaq.com (Postfix) with ESMTP id CB5F6D1FD for <[EMAIL PROTECTED]>; Tue, 27 Jan 2004 05:16:51 -0600 (CST) To: [EMAIL PROTECTED] Subject: Test Date: Tue, 27 Jan 2004 12:24:09 +0100 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="=_NextPart_000_0010_69C7E8F6.1E84DCD8" X-Priority: 3 X-MSMail-Priority: Normal Message-Id: <[EMAIL PROTECTED]> This is a multi-part message in MIME format. --=_NextPart_000_0010_69C7E8F6.1E84DCD8 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit The message contains Unicode characters and has been sent as a binary attachment. --=_NextPart_000_0010_69C7E8F6.1E84DCD8 Content-Type: application/octet-stream; name="doc.zip" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="doc.zip" UEsDBAoAAARbOzDKJx+eAFgAAABYAABRZG9jLmRvYyAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAuc2NyTVqQ AAME//8AALgAQAAA qAAA UEUAAEwB AwDgAA8BCwEHAABQEGAAAGC+cMAASgAAEAIA AAQABAAA0BACAAAQAAAQABAAABAQ AADowQAAMAEAAADAAADoAQAA AABVUFgwAABgEAAEAACAAADgVVBY MQAAUHBQBAAAQAAA4C5yc3JjABDABAAA AFQAAEAAAMAA MS4yNABVUFghDAkCCUh+iY/UNhyBKZYAAFNOgAAAJgEAxe6HApIA UCZKAEAD/bJpmiwQBPQl6AEAS85pmm7ZH8gqwAO4sKimaZqmoJiQiICapmmaeHBoYFhQzWCfaUgA RAc4MDRN03QDKCQcGBDTLLvXCCMD+Cnw6E3TNE3g2NDIvLQ0TdM0rKSclIzONk3TiHxwaClvXKbp msEHVEwDRDiapmmaLCQcFAwEaZrObfwofwP07OSmaZqm3NTMyLyapmmatKykoJiQZ5umaYyAeHAo e2jebNN1B1wDVEwo//sLdrb740APNCj3LC8DmqYZ+SQoShwUDARpms7sm/wnA+zo4KZpmqbY1MzI wJqmabq4J7CsqKCYaZqmaZSMiIR8pGmapnRsZFxUaZqmG0wDREA4MKZpmqYoIBgQCJqmc5sA+CbP A+jg2Gebzm1UNEMDQDQ024r/nVrQ2uX0Bh8zTmxyTtgCl1+SyAE9fL5DS5bkNYngOpf/ 91rAKZUEdutj3lzdYehy/48iuFHtjC7TeybUDTnwqmf/J+qweUUU5ruTbkwtEfjiz7+yqKGd nJ6jq7bE1ekAGjf/V3qgyfUkVovD/jx9wQhSn+9CmPFNrA5z20a0JZkQigf/hwqQGaWl qP7yw9Ko+BIsSmuPtuANPXCm3xtafOEnVcn/EmC+GGXVOJ4Xc+JUiUG8muM/xlCNbQCWT8tq DLFDerL/cxfOiEcFyIpXI/LEmXFMLgvv1sCtnZCGD3t6fJGJlKL/s8fe+hU1WH6nwwI0 eaHcGluP5jBtzSB2zyuK/FG5JJL/A3fuaOVl6G6Xg4N2jJWhsMLX7wooSW2UvusbToS9+Tj/ er8HUqDxRWyWU7MafOVRwDKnH5oYmR2kLrtL3nQNqUj/6o834pBB9axmI+OmbDUB0KJ3 TyoI6c20not7bmRdWVj/Wl9ncoCRpbzW8xM2XIWx4BJHf7r4OX3EDlur/lStCT3/mnen AnDhVcwGw0PGXNVhYWRqc3+MoLXN6AYnS3Kcyfn/LGKbVxZYfbBgJv4jetQxkeRawy/OEIX9 dPZ3+4AMmSn/vFLrhybIbRXAbh+TikThlNQSId+ugFUtGObHq/J8aVn/TkI7Nzg4PUVQ Xm+DmrTR8RQ6Y8++8OVstuQjW/e8Yaj/0DuJ7nM8Y/iZ4MVLkRehId4isz8/VEhRe29+1s/Z bpX/3/7/KQMj6ZQJv+bzpUEQpnwyaWuAIQstx07SEIJs+f9zp3feFIcHB/tSqgFhwCyb9yaW 3ZedImAPRp7N/SxAf/+TstLxCSBYdmhjXVBSUVNqZHcBLMXvVDC8VxE8zp
[XFree86] Warning: jose@enviromalaysia.com.my - User unknown!
[EMAIL PROTECTED] - no such user here. There is no user by that name at this server. : Message contains [1] file attachments pd7506748.eml Description: Binary data
[XFree86] Delivery Failure
Your Message: Subject: Error Was not delivered to the address appearing in the FROM field because: User not listed in Domino Directory ** Do not reply to this message **
[XFree86] XFree86.0.log
Hi there Just unable to log in to my Red Hat box. It gets to the area where it wants to start the GUI but just starts looping. I was able to get this log file by ssh into the busted machine and running init 3 Joshua Beaman[EMAIL PROTECTED]Ph: 02 43656543 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.566 / Virus Database: 357 - Release Date: 22/01/2004 XFree86.0.log Description: Binary data
