Is there any work on supporting portrait mode?
I'm trying to get X to drive a display in portrait mode. But the only driver that seems to work is the nVidia code and the performance is terrible. Is there any work to make a fast portrait mode work? I'm especially interested in support on VIA's CLE266 and the Intel i810. And to make life more fun I need to play movies, I'm using xine at the moment. Barry ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
Re: Is there any work on supporting portrait mode?
On Thu, 20 May 2004, Barry Scott wrote: I'm trying to get X to drive a display in portrait mode. But the only driver that seems to work is the nVidia code and the performance is terrible. Is there any work to make a fast portrait mode work? Not that I know of. Mark. I'm especially interested in support on VIA's CLE266 and the Intel i810. And to make life more fun I need to play movies, I'm using xine at the moment. Barry ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel ___ Devel mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/devel
[Fonts] re: i2675n
Hi again, I sent an email 2 days ago and I want to confirm everything now. Please read the info below and let me know if you have any questions. We are accepting your mo rtgage qualifications. If you have bad cr.edit, that's ok. You can get a $200,000 loa n for only $350/month. Appr oval process will take 1 minute. Just visit the link below and fill out the short form. A really great opportunity ! Thank You Best Regards, Jan Gifford 38598041767259576
[I18n] (no subject)
3.02% 3.02% 3.02% Re-finance now, even with bad-credit! *Best Re-finance Rate for credit challenged. *Best Customer Service *Lowest Interest-Rates in Years *SAVE $100-$400 per month Our easy application only takes 1 minutes. http://www.finalsavings.com/save.php http://www.finalsavings.com/save.php http://www.finalsavings.com/save.php applicable australis adversary asheville endothermic valley regulus Future reference options: http://finalsavings.com/st.html
[I18n] re: i2675n
Hi again, I sent an email 2 days ago and I want to confirm everything now. Please read the info below and let me know if you have any questions. We are accepting your mo rtgage qualifications. If you have bad cr.edit, that's ok. You can get a $200,000 loa n for only $350/month. Appr oval process will take 1 minute. Just visit the link below and fill out the short form. A really great opportunity ! Thank You Best Regards, Jan Gifford 38598041767259576
[XFree86] kdriver - Xfbdev freezing
Hi everyone, I'm trying to create a Kdriver Xserver using a framebuffer device. It all compiles fine, however when I go to run startx the system shows a grey background with a mouse cursor and then freezes. I have no idea what's going on or why it is doing that. Trying something else, I decided to run Xfbdev on its own.The grey screen comes up and mouse cursor is drawn and the mouse + keyboard is still alive. When Igo to run a app inthis server it draws a white box and then freezes. It seems that as soon as I go to run an application with the Xserver,everything freezes. Although I have used prebuilt binaries and they do work, so its obviously something I'm doing wrong or I have a broken XFree86 version. Does anyone have a clue? Here are the details: Kernel - 2.4.20 Distro - RedHat 9.0 XFree86 - 4.4.0 Video Card - Matrox Millennium 1 Processor - Intel Pentium200 Mhz config/cf/host.def : #define KDriveXServer YES #define TinyXServer YES #define XvesaServer YES #define ProjectRoot /usr/X11R6 #define BuildLBX YES #define BuildDBE YES #define KdriveServerExtraDefines -DPIXPRIV #define BuildRandR YES #define BuildXInputLib YES #define Freetype2Dir $(TOP)/extras/freetype2 #define Freetype2LibDir $(TOP)/exports/lib #define BuildXTrueType YES #define BuildScreenSaverExt YES #define BuildScreenSaverLibrary YES #define SharedLibXss YES #define ServerXdmcpDefines #define XfbdevServer YES Any help would be greatly appreciated. Thanks Dean Adamson Software Engineer Multitrode, Australia
Re: [XFree86] RedHat Linux login problems
Just a moment, did you graphical user interface started or is your whole screen black and you see this command prompt? --- Mr.Shock [EMAIL PROTECTED] schrieb: Hello, I have recently installed Red Hat linux version 9 onto my computer. And the installing process went fine. But when it asks me to log on this is were i get lost. So i type in (root) for my username. Then i type in my password and after that it goes to something like this. [EMAIL PROTECTED] root]# I have no idea what it is asking for i have tryed to check and see if my password has expired. Changed that and then i also created a new user by using useradd and that didnt help either so if you would be kind enough to report my problem or answer a.s.a.p. Thank You, 0023 has been here - Do you Yahoo!? Yahoo! Domains - Claim yours for only $14.70/year Mit schönen Grüßen von Yahoo! Mail - http://mail.yahoo.de ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xfree86 and EloTouch USB Touchscreen
If anyone is going to install any (I)PC with a touchscreen manufactured by EloTOuch Systems *and* the touchscreen is connected via USB I highly recommend not buying this machine. Elotouch is suppling a beta driver for USB touch devices, which obviously never ever worked. I was i contact with Elotouch Germany for over 2 weeks, and they were not able to get any feedback from the development guy in the usa. Neither emails nor phonecalls made this guy react in any way. So after 2 weeks I give up, asked the PC manufacturer to change the USB inteface to a serial one. I'm planning to use the EloTouch driver supplied with the XFree86 distribution. So *DONT* buy EloTouch touchscreens with USB interface, unless you wan't to get into really deep trouble. regards -- Gerhard Hintermayer http://www.inode.at/g.hintermayer mailto:[EMAIL PROTECTED] mobile: +43 664 1537810 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Dualhead: BusID PCI:1:0:1: No matching Device section on Solaris x86
Guy Rouillier wrote: I've only done this with Linux, not Solaris. Both the BusID values have to be the same (which makes sense, you only have one card, right?) Everything else looks okay. Thanks Guy, Unfortunately naming both of the cards to 1:0:0 results in a server crash with resourse conflict (see below). I understood it so that the primary and secondary displays of 9600 (unlike some older Radeons) show as two devices. Did I understand correctly? The server totally crashes with both devices set at 1:0:0 whereas the machine is usable (although one one screen only) with different PCI locations. (--) PCI:*(1:0:0) ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xe00 0/28, 0xfd60/16, I/O @ 0xa000/8, BIOS @ 0xfd50/17 (--) PCI: (1:0:1) ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary) rev 0, Mem @ 0xd000/28, 0xfd40/16 reland Ltd. The crash resulting with setting both cards to 1:0:0 is: == Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (II) RADEON(0): Acceleration enabled (==) RADEON(0): Silken mouse disabled (II) RADEON(0): Using hardware cursor (scanline 1202) (II) RADEON(0): Largest offscreen area available: 1600 x 6986 *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] (II) Screen 0 shares mem io resources (II) Screen 1 shares mem io resources (II) RADEON(0): Wrote: rd=12, fd=101, pd=3 == With 1:0:0 for primary and 1:0:1 for secondary devices in XF86Config I get this No matching Device and but the server starts okay on one head: == (II) Primary Device is: PCI 01:00:0 (II) ATI: Candidate Device section PriAti. (II) ATI: Candidate Device section SecAti. (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found(--) Chipset ATI Radeon 9600 AP (AGP) found (II) resource ranges after xf86ClaimFixedResources() call == I have had a feeling that it almost works but not quite for quite a few days now. I would be so happy if I got this machine to work dualheaded. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] install red hat 9
An problem dont permit to install red hat 9, video hardware radeon 8500le sapphire,the code problem is (EE) radeon (0) : no valid mode found for this DFP/LCD What I have to do right for to install red hat, and to load driver ati 8500le correct where I can find it. In attended of an answer by the question, I thank you,
[XFree86] Dualhead: BusID PCI:1:0:1: No matching Device section on Solaris x86
you need to use PCI:1:0:0 for both instances. PCI:1:0:1 is just a a place holder so that two devices show up in the windows device tree. the problem is no monitor is detected on your second port: (II) RADEON(0): Displays Detected: Monitor1--Type 1, Monitor2--Type 0 you need to force it on by adding: Option monitorlayout CRT, CRT to your PriAti device section. See the radeon man page for more. Also the DVI port is always the primary crtc. Alex I have trouble getting a dualhead setup to work with a Radeon 9600 Pro card on Solaris x86 (Solaris 10 Express). The Solaris I tried came with 4.3.0, and after several days hitting my head to the wall I downloaded 4.4.0 from www.tools.de/solaris/xf86. The Radeon has a CRT plugged into the primary connector. The secondary connector has another CRT with a DVI-VGA converter. Both of the screens display the same picture, and this has been the case from day 1. The identical displays are also shown during BIOS messages etc. so it appears the dual display is on by default. __ Do you Yahoo!? Yahoo! Domains Claim yours for only $14.70/year http://smallbusiness.promotions.yahoo.com/offer ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] help with debian on compaq
Knoppix does a good job with the autodetection routines. It also has very conservative default settings. For example its default with XFree86 is to use the vesa driver. This driver almost always works unless your font server crashes and Knoppix doesn't use a font server. You can use Knoppix to get XFree86 setup if you wish. Just copy the file /etc/X11/XFree85Config-4 to your hard drive after you've got everything configured to your satisfaction. You can also install Knoppix to your hard drive, it's based on Debian. :) Just in case you haven't already found it, here is the link to the English language Knoppix resource site. http://www.knoppix.net/ http://www.knoppix.net/docs/index.php/CheatCodes - useful for configuring Knoppix at boot. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Beau Sent: Thursday, May 20, 2004 12:57 AM To: [EMAIL PROTECTED] Subject: RE: [XFree86] help with debian on compaq On Tue, 18 May 2004, Cynthia Grossen wrote: You'll want to read this first ftp://ftp.xfree86.org/pub/XFree86/4.4.0/binaries/Common/Install Actually, I had tried that route once, before posting to the list. My attempts to make X work from binary failed, as did my efforts at building from source. I'm kindof green. Here's a possibly relevant question: Howcome knoppix does X so sweetly on my machine. The corolary question is, might there be some way to use this fact to help me get going? -- beau (c)2004ISR; http://www.semanticrestructuring.com Choose One: ( )Democracy ( )Paperless Voting http://www.verfiedvoting.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] install red hat 9
On Thu, 20 May 2004 14:13:51 +0200 Vainer Tosi [EMAIL PROTECTED] wrote: An problem don't permit to install red hat 9, video hardware radeon 8500le sapphire,the code problem is (EE) radeon (0) : no valid mode found for this DFP/LCD What I have to do right for to install red hat, and to load driver ati 8500le correct where I can find it. XFree86 4.4 (the latest release) has a radeon driver that supports a Radeon 8500 card. Karl L ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Dualhead: BusID PCI:1:0:1: No matching Device section on Solaris x86
Hi Alex, Thank you for extra info about the PCI assignments. Problem is every time I try to use the PCI:1:0:0 the server crashes (Signal 11). When I added the Option monitorlayout CRT, CRT to the PriAti, the resolution on the monitor on the analog port of 9600 changed into 640x480 with desktop size 1600x1200 but the behaviour of server was still the same. The monitor on DVI port was as before. What is the radeon man page you're referring to. I only found this readme: http://www.xfree86.org/4.4.0/DRI10.html#47 Thank you for your help, guys. Alex Deucher wrote: you need to use PCI:1:0:0 for both instances. PCI:1:0:1 is just a a place holder so that two devices show up in the windows device tree. the problem is no monitor is detected on your second port: (II) RADEON(0): Displays Detected: Monitor1--Type 1, Monitor2--Type 0 you need to force it on by adding: Option monitorlayout CRT, CRT to your PriAti device section. See the radeon man page for more. Also the DVI port is always the primary crtc. Alex ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] xfree opens port 6000/tcp X11 how to close it
Zbigniew uszpiski wrote: Hello! I use XFree 4.0.3.1 When it starts, a port 6000/tcp X11 is opened. How to configure XFree to NOT open any ports ? On recent versions of XFree86, simply add -nolisten tcp to the command line options used to start it. I don't remember if that option was present on a version that ancient, but you can easily try it and find out. -- -Alan Coopersmith- [EMAIL PROTECTED] Sun Microsystems, Inc. - X Window System Engineering ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problems using G450 dualhead (mga) and onboard S3 (Savage) drivers under SUSE 9.1
Information: I just spent 6 hours trying to get a G450 Dual head card to work with my onboard S3 ProSavage, and by the response I got from google, I must be the first, so I thought I write this for any sorry sole attempting it in the future. I guess much of this would be the same for any graphics card working with the G450. I have a Shuttle SK41G, and was using the onboard graphics as my sole head. Sax2 detected this as a S3 ProSavage DDR-K (savage). Everything worked fine. Then I decided to buy a Matrox G450 Millenium 32MB DDR PCI card so I had could have 3 monitors. I've tried a ATI Radeon 7000 AGP with the Shuttle SK41G in the past, and found that use of the AGP slot, turns off the onboard graphics chip, so you must use a PCI unless you want to replace the onboard chip. Two notable problems, I had to ensure AGP was set as the primary display, so as to have the ProSavage as my main screen on bootup. This is also the first screen as detected by SuSE's sax2. Also I found that sax2 insists on putting Option NoHal in the mga device sections, which kills the card in Dual Head mode. I had strange but occasionally successful results with one montior disconnected in this mode. Everything began to work, but badly with 'Option UseBIOS off' in the ProSavage section. The world became reliable and rosey with 'Option ShadowFB' in the second G450 section. Supprisingly mga_hal doesn't seem to be needed and the NoHal option just breaks things. After much experimentation this XF86Config setup seemed to work (Most XF86Config sections left out as they have nothing to do with the problem) Module may also be an unneccesary section, I don't know so I left it in :- Section Module Load speedo Load type1 Load v4l Load glx Load dri Load extmod Load dbe Load freetype EndSection Section Device BoardNameProSavage DDR-K BusID1:0:0 Driver savage Identifier Device[0] OptionUseBIOS off Screen 0 VendorName S3 EndSection Section Device BoardNameG450 BusID2:0:0 Driver mga Identifier Device[1] Screen 0 VendorName Matrox EndSection Section Device BoardNameG450 BusID2:0:0 Driver mga Identifier Device[2] Option ShadowFB Screen 1 VendorName Matrox EndSection Section ServerLayout Identifier Layout[all] InputDevice Keyboard[0] CoreKeyboard InputDevice Mouse[1] CorePointer Option Clone off Option Xinerama on Screen Screen[0] Screen Screen[1] LeftOf Screen[0] Screen Screen[2] RightOf Screen[0] EndSection I note some problems with X crashing that go away with Xinerama being turned off, but other than that it seems fine Simon ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] cannot start x on debian
Been having trouble getting x running on my debian box so I ran Knoppix and copied the XFreeConfig-4 file from there to /etc/X11 but I still cant start x. It gets a lot farther now, but no luck. Any helpful hints? Log file attached Thanks! zb XFree86.0.log Description: Binary data
[XFree86] connection to :0.0 refused by server
Hi all, this is my first time sending to a mail list like this, so please forgive any bad etiquete that I may have. I am running gentoo on a duron 1300 with a nVidia Geforce video card. X starts fine and kde runs ok too. However, when I switch to su as a user, I can't run any X-based apps. Like emacs for example or anything else, below is the error msg I get as well as my config file. Also, I notice that X has a nice value of 0. I would like to change that -19 but I haven't been able to. Any hints? Thanks a lot Chris Bruyere %emacs (as su, while logged in as bruyere, a normal user) Xlib: connection to :0.0 refused by server Xlib: No protocol specified emacs: Cannot connect to X server :0.0. Check the DISPLAY environment variable or use `-d'. Also use the `xhost' program to verify that it is set to permit connections from your machine. ---config file Section ServerLayout Identifier XFree86 Configured Screen 0 Screen0 0 0 InputDeviceMouse0 CorePointer InputDeviceKeyboard0 CoreKeyboard EndSection Section Files RgbPath /usr/X11R6/lib/X11/rgb ModulePath /usr/X11R6/lib/modules FontPath /usr/X11R6/lib/X11/fonts/misc/ FontPath /usr/X11R6/lib/X11/fonts/Speedo/ FontPath /usr/X11R6/lib/X11/fonts/Type1/ FontPath /usr/X11R6/lib/X11/fonts/CID/ FontPath /usr/X11R6/lib/X11/fonts/75dpi/ FontPath /usr/X11R6/lib/X11/fonts/100dpi/ EndSection Section Module Load extmod Load dri Load dbe Load record Load xtrap Load glx Load speedo Load type1 EndSection Section InputDevice Identifier Keyboard0 Driver keyboard EndSection Section InputDevice Identifier Mouse0 Driver mouse Option Protocol IMPS/2 Option Device /dev/mouse Option ZAxisMapping 4 5 EndSection Section Monitor #DisplaySize 320 240 # mm Identifier Monitor0 VendorName ADI ModelNameMS-GT56 Option DPMS EndSection Section Device ### Available Driver options are:- ### Values: i: integer, f: float, bool: True/False, ### string: String, freq: f Hz/kHz/MHz ### [arg]: arg optional #Option SWcursor # [bool] #Option HWcursor # [bool] #Option NoAccel # [bool] #Option ShowCache # [bool] #Option ShadowFB # [bool] #Option UseFBDev # [bool] #Option Rotate# [str] #Option VideoKey # i #Option FlatPanel # [bool] #Option FPDither # [bool] #Option CrtcNumber# i Identifier Card0 #this was Card0 Driver nvidia#this was nv VendorName nVidia Corporation BoardName NV11 [GeForce2 MX/MX 400] BusID PCI:1:0:0 EndSection Section Screen Identifier Screen0 Device Card0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 1 EndSubSection SubSection Display Depth 4 EndSubSection SubSection Display Depth 8 EndSubSection SubSection Display Depth 15 Modes 1024x768 EndSubSection SubSection Display Depth 16 Modes 1024x768 EndSubSection SubSection Display Depth 24 Modes 1280x960 EndSubSection SubSection Display Depth 32 Modes 1152x864 EndSubSection EndSection __ Post your free ad now! http://personals.yahoo.ca ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] xev and keycodes greater than 255
I'm trying to get my remote control working. It uses the Linux input system rather than lirc. So, the button presses generate keyboard events. All the buttons that generate keycodes less than 256 work fine, but a few (such as Ch+ and Ch-) generate keycodes greater than 255. None of these keys work. If I test it with evtest and xev, evtest sees the ChannelDown event, but xev does not. $ evtest /dev/input/event Event: time 1085087962.698609, type 1 (Key), code 114 (VolumeDown), value 0 Event: time 1085087962.698611, type 0 (Reset), code 0 (Reset), value 0 Event: time 1085087963.459369, type 1 (Key), code 403 (ChannelDown), value 1 Event: time 1085087963.459371, type 0 (Reset), code 0 (Reset), value 0 $ xev KeyRelease event, serial 28, synthetic NO, window 0x301, root 0x36, subw 0x0, time 21962819, (426,-275), root:(430,392), state 0x10, keycode 174 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES, XLookupString gives 0 characters: I'm using... xfree86 4.2.1 linux 2.6.3 What's the cause of this problem? Is it fixed in any later version of XFree86? Please cc me in your reply. Thanks! Shaun ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Video Card problems
Dear Colleagues, I am having very much troubles with my Radeon 7500 64 Mb video card, Woody release of Debian does not recognize the screen. I am not able to find a driver or the way to let it work. I report here below all the messages of the XFree log. What I already tried was re-installing all Debian with different installation option. I tried to update the kernel to 2.4.18 but I couldn't. Could you give any help? I am desperately looking for somebody who had the same trouble in the newsgroup and similar, it's hard... it seems that the XFree configuration is only mine and nobody else's. The important point of the messages you may find it at the end of this log. Thank you very much for your any help. Alex __ This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: /var/log/XFree86.0.log, Time: Thu May 20 01:10:53 2004 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device Generic Video Card (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout it (**) XKB: layout: it (**) Option XkbVariant it (**) XKB: variant: it (==) Keyboard: CustomKeycode disabled (**) |--Input Device Configured Mouse (**) |--Input Device Generic Mouse (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (WW) Cannot open APM (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1043,8064 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0f:0: chip 1274,5880 card 1274,2000 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3147 card 1043,8052 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card , rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5157 card 174b,7147 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0),
Re: [XFree86] connection to :0.0 refused by server
xhost +localhost; xhost +$(hostname) before you su Erwann Thoraval erwann.thoraval@To: [EMAIL PROTECTED] atr.jp cc: Sent by: Subject: Re: [XFree86] connection to :0.0 refused by [EMAIL PROTECTED] server ee86.org 05/20/2004 07:23 PM Please respond to erwann.thoraval On Friday 21 May 2004 04:10, Chris Bruyere wrote: Hi all, this is my first time sending to a mail list like this, so please forgive any bad etiquete that I may have. I am running gentoo on a duron 1300 with a nVidia Geforce video card. X starts fine and kde runs ok too. However, when I switch to su as a user, I can't run any X-based apps. Like emacs for example or anything else, below is the error msg I get as well as my config file. Also, I notice that X has a nice value of 0. I would like to change that -19 but I haven't been able to. Any hints? Thanks a lot Chris Bruyere %emacs (as su, while logged in as bruyere, a normal user) Xlib: connection to :0.0 refused by server Xlib: No protocol specified emacs: Cannot connect to X server :0.0. Check the DISPLAY environment variable or use `-d'. Also use the `xhost' program to verify that it is set to permit connections from your machine. [snip config file] Hello, Well, I think the error message is rather clear. When you log in a X session, by default, only the user which is logged can launch X applications, because he is the only user to have the right to connect to the X server. So when you want to launch an application as root for instance, you have to do 2 things : - root : set the DISPLAY variable (as said above) : export DISPLAY=:0 or setenv DISPLAY :0 - user who has launched X : tell the X server to accept connections from others : xhost + Be careful, 'xhost +' disable protection so any computer can access to your X server. I don't knowan other solution, bu it is strange that you have to do 'xhost +'. Maybe you can allow connections for certains users on the local machine, not only for certains machines (ie, a user-based authentication and not a machine-based authentication). And it's strange that root can't conect to the X server by default (it's the same on Debian).. -- Erwann ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] a propos d une ATI radeon 7500....
je voudrai savoir comment , ou avec quel pilote d une ati radeon 7500, on peut utilisé le double écran sous linux. merci de bien vouloir me répondre svp.. [EMAIL PROTECTED] _ MSN Messenger : discutez en direct avec vos amis ! http://www.msn.fr/msger/default.asp ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] connection to :0.0 refused by server
On Thu, 20 May 2004, Chris Bruyere wrote: Also, I notice that X has a nice value of 0. I would like to change that -19 but I haven't been able to. Any hints? I believe only root can set priorities below zero. The startx script probably runs with root permissions so maybe you can use nice (man 1 nice) to set it in that script. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] installing X Windows Server question
I have problems on installing X windows Server by XFree86 on Debian Linux. The following are the major error messages. (WW)The directory /usr/lib/X11/fonts/cyrillic doesnt exist Entry deleted from font path. (WW)Cannot open APM (--)PCI:#(1:0:0) NVidia unknow chipset (Ox0253)rev162 (--)Assigning device setting without bus ID to primary devices. (EE) No devices detected. There is a line started with (II) contains a list of Video Card model. My Video Card is Geforce4 Ti4200 and it is not included in the list. Is that means the XFree86 does not support Geforce4? Should I upgrade the XFree86? Thanx ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] installing X Windows Server question
The nv driver that comes with XFree86 didn't support the GeForce4 cards until XFree86 4.3. Alternatively nvidia has binary drivers available on their web site that should work with your current XFree86 version. The XFree86 project can only provide technical support for the driver that comes with XFree86, however. Mark. On Fri, 21 May 2004 [EMAIL PROTECTED] wrote: I have problems on installing X windows Server by XFree86 on Debian Linux. The following are the major error messages. (WW)The directory /usr/lib/X11/fonts/cyrillic doesnt exist Entry deleted from font path. (WW)Cannot open APM (--)PCI:#(1:0:0) NVidia unknow chipset (Ox0253)rev162 (--)Assigning device setting without bus ID to primary devices. (EE) No devices detected. There is a line started with (II) contains a list of Video Card model. My Video Card is Geforce4 Ti4200 and it is not included in the list. Is that means the XFree86 does not support Geforce4? Should I upgrade the XFree86? Thanx ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
