Re: SOLVED: 1400x1050 on a Dell 510m
Hi, First of all, thanks to everybody for trying to make things work. Now, to the problem. I have this brazilian notebook, Novadata N8800, actually a Compal CY27 (?), or similar. Using lspci, I get for the graphics card: 00:02.0 VGA compatible controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corp. 82852/855GM Integrated Graphics Device (rev 02) Right now, under Linux, X (Free86 or Org) only works in 800x600 or 640x480. It can not make 1024x768. I tried both versions of the 855resolution utility on my notebook. None worked. Previously, I have tried XFree4.4, and XFree 4.3.X with and without the 855patch from Christian Zietz. None worked either. WinXP runs under 1024x768, and the X server from XiG also runs under 1024x768. WinXP tells that the VBIOS version is "2880". When I do "855resolution -l" with version 0.1, I get: Chipset: 855GM BIOS Configuration area offset: 0x0c20 bytes BIOS Version: 80Mo Mode 30 : 3856x1536, 8 bits/pixel Mode 32 : 3600x2328, 8 bits/pixel Mode 34 : 3856x3840, 8 bits/pixel Mode 36 : 3856x3852, 8 bits/pixel Mode 38 : 3856x2584, 8 bits/pixel Mode 3a : 3856x1816, 8 bits/pixel Mode 3c : 3856x2320, 8 bits/pixel Mode 41 : 3856x1536, 16 bits/pixel Mode 43 : 3600x2328, 16 bits/pixel Mode 45 : 3856x3840, 16 bits/pixel Mode 47 : 3856x3852, 16 bits/pixel Mode 49 : 3856x2584, 16 bits/pixel Mode 4b : 3856x1816, 16 bits/pixel Mode 4d : 3856x2320, 16 bits/pixel Mode 50 : 3856x1536, 32 bits/pixel Mode 52 : 3600x2328, 32 bits/pixel Mode 54 : 3856x3840, 32 bits/pixel Mode 56 : 3856x3852, 32 bits/pixel Mode 58 : 3856x2584, 32 bits/pixel Mode 5a : 3856x1816, 32 bits/pixel Mode 5c : 3856x2320, 32 bits/pixel And, when I use version 0.2, the output is: Chipset: 855GM VBIOS type: 1 VBIOS Version: 2880 (Modeline : 25175 640 655 751 799 480 489 491 524) (Modeline : 31500 640 663 703 831 480 488 491 519) (Modeline : 31500 640 655 719 839 480 480 483 499) Mode 30 : 640x480, 8 bits/pixel (Modeline : 4 800 839 967 1055 600 600 604 627) (Modeline : 5 800 855 975 1039 600 636 642 665) (Modeline : 49500 800 839 967 1055 600 600 603 624) Mode 32 : 800x600, 8 bits/pixel (Modeline : 65000 1024 1047 1183 1343 768 770 776 805) (Modeline : 75000 1024 1047 1183 1327 768 770 776 805) (Modeline : 78750 1024 1039 1135 1311 768 768 771 799) Mode 34 : 1024x768, 8 bits/pixel (Modeline : 65000 1024 1047 1183 1343 600 697 704 805) (Modeline : 78750 1024 1039 1135 1311 600 692 696 799) (Modeline : 94500 1024 1071 1167 1375 600 692 696 807) Mode 36 : 1024x600, 8 bits/pixel (Modeline : 108000 1280 1327 1439 1687 1024 1024 1027 1065) (Modeline : 135000 1280 1295 1439 1687 1024 1024 1027 1065) (Modeline : 157500 1280 1343 1503 1727 1024 1024 1027 1071) Mode 38 : 1280x1024, 8 bits/pixel (Modeline : 162000 1600 1663 1855 2159 1200 1200 1203 1249) (Modeline : 202500 1600 1663 1855 2159 1200 1200 1203 1249) (Modeline : 229500 1600 1663 1855 2159 1200 1200 1203 1249) Mode 3a : 1600x1200, 8 bits/pixel (Modeline : 234000 1920 2047 2255 2599 1440 1440 1443 1499) (Modeline : 297000 1920 2063 2287 2639 1440 1440 1443 1499) Mode 3c : 1920x1440, 8 bits/pixel (Modeline : 25175 640 655 751 799 480 489 491 524) (Modeline : 31500 640 663 703 831 480 488 491 519) (Modeline : 31500 640 655 719 839 480 480 483 499) Mode 41 : 640x480, 16 bits/pixel (Modeline : 4 800 839 967 1055 600 600 604 627) (Modeline : 5 800 855 975 1039 600 636 642 665) (Modeline : 49500 800 839 967 1055 600 600 603 624) Mode 43 : 800x600, 16 bits/pixel (Modeline : 65000 1024 1047 1183 1343 768 770 776 805) (Modeline : 75000 1024 1047 1183 1327 768 770 776 805) (Modeline : 78750 1024 1039 1135 1311 768 768 771 799) Mode 45 : 1024x768, 16 bits/pixel (Modeline : 65000 1024 1047 1183 1343 600 697 704 805) (Modeline : 78750 1024 1039 1135 1311 600 692 696 799) (Modeline : 94500 1024 1071 1167 1375 600 692 696 807) Mode 47 : 1024x600, 16 bits/pixel (Modeline : 108000 1280 1327 1439 1687 1024 1024 1027 1065) (Modeline : 135000 1280 1295 1439 1687 1024 1024 1027 1065) (Modeline : 157500 1280 1343 1503 1727 1024 1024 1027 1071) Mode 49 : 1280x1024, 16 bits/pixel (Modeline : 162000 1600 1663 1855 2159 1200 1200 1203 1249) (Modeline : 202500 1600 1663 1855 2159 1200 1200 1203 1249) (Modeline : 229500 1600 1663 1855 2159 1200 1200 1203 1249) Mode 4b : 1600x1200, 16 bits/pixel (Modeline : 234000 1920 2047 2255 2599 1440 1440 1443 1499) (Modeline : 297000 1920 2063 2287 2639 1440 1440 1443 1499) Mode 4d : 1920x1440, 16 bits/pixel (Modeline : 25175 640 655 751 799 480 489 491 524) (Modeline : 31500 640 663 703 831 480 488 491 519) (Modeline : 31500 640 655 719 839 480 480 483 499) Mode 50 : 640x480, 32 bits/pixel (Modeline : 4 800 839 967 1055 600 600 604 627) (Modeline : 5 800 855 975 1039 600 636 642 665) (Modeline : 49500 800 839 967 1055 600 600 603 624) Mode 52 : 800x600, 32 bits/pixel (Modeline : 65000 1024 1047 1183 1343 768 770 776 805) (Modeline
[Fonts] carthaginian
Harry Hand,% The [EMAIL PROTECTED] will all0w you to receive all the [EMAIL PROTECTED] that you 0rder with your remote contr0l,( payperviews,XXX-movies,sp0rt events,special-events%,RND_SYB http://peter234234.com/cable/ douse ,celsius ,alterman ,fog .
[Fonts] Emotional Stability - 67% Improvement
cleavagecigarsandslyly --- Finest Quality H+G+H at 50% off retail. B+u'y 2 get 1 F_REE please look at: http://www.manhappy.com Clinical evidence demonstrates that by replacing HGH in our bodies we can dramatically reverse the signs of aging! * L_o_s_e Body-fat Fast! * Improve Muscle Tone. * Improved skin texture resulting in a more youthful appearance. * Fewer skin wrinkles. * Enhances overall physical and mental well being. * Helps provide deeper, more restful sleep. --- 1 0 0 % Guaranteed,Same Day Shipping. B,U,Y NOW http://www.manhappy.com --- To be deleted from our member database, http://www.manhappy.com/R.html feeney apotheosis carmichael malfeasant circumspect trainee milord treasonous mastodon weave appropriable pasha cruickshank scapula manse beside incaution arlington directrix loci sewage dutton foolproof patch crucifixion fondle infestation grand brett salvage evocable broke baird
[XFree86] fatal error - no screen found
Hi I install RedHat 7.2 as a guest Operating system in Microsoft Virtual PC that run on Windows XP. But when I try to startx, it prompt me the error fatal server error no screens found and I examined the log file, and found out that (EE) No devices detected. I am using Nvidia card, so when the setup start, I chosen the NVdia generic card, the version of XFree is 4.1.0. Lawrence Ha Technical Support Engineer TechSource Systems Sdn Bhd Tel : (603) 8076 1953 Fax : (603) 8076 1954
Re: [XFree86] No Xserver with Debian 3.0r2
Morrison Hoyle wrote: I would appreciate any help to get the Xserver working with Debian. I have been told many times that Debian is the best distro so when the Australian Personal Computer Magazine for June 2004 had a free DVD with this distro I had to try it. But after the complete installation has gone apparently perfectly, it makes several attempts to bring up the GUI and collapses with ¨no screens¨. I have been through this several times, always with the same result. Now I have used several other distros and versions and my system has always automatically set up XFree86 so what is wrong with Debian? I have reverted to Mandrake 9.2 for the moment. I attach the Xfree86.0.log file from my Debian attempts. Apologies for the size of this file. My screen is a LG L1512S although Morphix and Knoppix say it is a GSM 3b64. It appears to only want to operate at 1024x768 which is OK with me. The on-board video card is SiS650. I see that Debian 3.0r2 uses XFree86 4.3.0 which is the same as with Knoppix although the kernel versions are not the same. Should I copy the XF86Config and XF86Config-4 files produced by Knoppix and replace those created by Debian? Please help! Log file is attached. This log is not from Debian and I don't see any no screens found errors there. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net *** http://www.winischhofer.net twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Touch Screen on XF86 4.1.0
hi all, I try to configure a touch screen (Wincor BEETLE/iPOS) follow the instruction on the site http://www.cdp1802.org/mmmtouch/ when i touch the screen the pointer go up and down. My XFree version is 4.1.0 on RedHat 7.2. The config and log files are in attachment. any one can help me? thanks (sorry for my bad english) Angelo XFree86.0.log Description: Binary data XF86Config-4 Description: Binary data
RE: [XFree86] Problems using Xfree4.4 with Solaris 8 and a Silicon Motion SM722 graphics device
Hi Marc, I tried installing the aperture driver, but this had no effect on my system. I'll look into the Int10 driver when I have some spare time... Cheers, Simon. -Original Message- From: Marc Aurele La France [SMTP:[EMAIL PROTECTED] Sent: 27 May 2004 19:50 To: Simon Egerton Cc: [EMAIL PROTECTED] Subject:Re: [XFree86] Problems using Xfree4.4 with Solaris 8 and a Silicon Motion SM722 graphics device On Mon, 24 May 2004, Simon Egerton wrote: I'm having problems getting XFree 4.4 up and running with Solaris 8 on my ix86 base board using a Silicon Motion 722 graphics device. I've installed the Solaris 8 binaries and configured the XF86config file, but when I launch XFree I'm left with a blank screen. I've tried the same hardware set-up under Linux, installing again from the 4.4 binaries, and everything works fine. I've attached the respective log files, Solaris and Linux. From the Solaris log file I can see that the video BIOS is not detected, and the Silicon Motion driver is stuck in a loop issuing video reset commands. Has anyone else experienced the same problem? Is there a fix or workaround to get XFree working under Solaris with this SM graphics device? Here's something you can try on the Solaris side. Do everything as root. Install the aperture driver. Intructions for this are in README.Solaris. Ignore the part of it that says the aperture driver shouldn't be required in your situation. After the reconfiguration boot back into Solaris, but before starting the server, ensure that /dev/fbs/aperture exists and move (or rename) /dev/xsvc. Now start the server. I can't promise that this'll work, but if it does, you'll end up with a functional setup (and I have changes to make for the next release). If this doesn't work, it's likely Solaris clobbers the BIOS data the server needs, in which case changes to the int10 module will be needed to always re-initialise the adapter. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply| | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] report problems
Sorry,I can't Engrish. Last message,Please report problems to [EMAIL PROTECTED] I send it. Good Bye. -- XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 4.9 i386 [ELF] Build Date: 07 October 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Jun 1 20:07:36 2004 (==) Using config file: /etc/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor i1124LCD (**) | |--Device LynxEM4+ (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (**) Option AutoRepeat 500 30 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel jp106 (**) XKB: model: jp106 (**) Option XkbLayout jp (**) XKB: layout: jp (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/encodings/. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/encodings/). (WW) `fonts.dir' not found (or not valid) in /usr/X11R6/lib/X11/fonts/encodings/large. Entry deleted from font path. (Run 'mkfontdir' on /usr/X11R6/lib/X11/fonts/encodings/large). (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/URW/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option DisableVidModeExtension (**) Option AllowNonLocalXvidtune (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7194 card , rev 01 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7198 card , rev 01 class 06,80,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7199 card , rev 00 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,719a card , rev 00 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,719b card , rev 00 class 06,80,00 hdr 00 (II) PCI: 00:09:0: chip 126f,0712 card 1014,01aa rev a0 class 03,00,00 hdr 00 (II) PCI: 00:0a:0: chip 104c,ac1e card , rev 00 class 06,07,00 hdr 02 (II) PCI: 00:0b:0: chip 1013,6005 card 1014,01a9 rev 01 class 04,01,00 hdr 00 (II) PCI: 00:0c:0: chip 11c1,0449 card 1436,0440 rev 01 class 07,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (--) PCI:*(0:9:0) Silicon Motion, Inc. SM712 LynxEM+ rev 160, Mem @ 0xfd00/24 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0
[XFree86] SOLUTION: could not open default font 'fixed'
WARNING: This requires reading so it is not for the faint of heart. http://xfree86.linuxwiki.org/FAQErrorMessages#head-66113454d1ddc398ffb1e 7bce3fb588e7d5dff4d Follow the above link, it offers two solutions. I recommend setting your font paths manually. Good luck and use google if you have additional questions this question has been answered many, many, many times. http://www.google.com/search?hl=enie=UTF-8q=could+not+open+default+fon t+%27fixed%27btnG=Google+Search Results 1 - 10 of about 218,000 for could not open default font 'fixed'. (0.47 seconds) ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] fatal error - no screen found
You need to use a more recent version of XFree86. Upgrade to at least version 4.3 and preferably 4.4. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lawrence Ha Sent: Tuesday, June 01, 2004 2:32 AM To: [EMAIL PROTECTED] Subject: [XFree86] fatal error - no screen found Importance: High Hi I install RedHat 7.2 as a guest Operating system in Microsoft Virtual PC that run on Windows XP. But when I try to startx, it prompt me the error 'fatal server error - no screens found' and I examined the log file, and found out that (EE) - No devices detected. I am using Nvidia card, so when the setup start, I chosen the NVdia generic card, the version of XFree is 4.1.0. Lawrence Ha Technical Support Engineer TechSource Systems Sdn Bhd Tel : (603) 8076 1953 Fax : (603) 8076 1954 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Can't run X
Hello I can't run the command startx (bash: startx: command not found) When I try to run X, the server crashes. Here's the information the website said to attach. 1. Copy of my XFree86 log file 2. XF86Config file 3. XFree 86 version: 4.3.0, 9 May 2003, X Protocol version 11, revision 0, Release 6.6 4. Operating system: Linux 2.4.22-10mdk (Linux Mandrake 9.2) 5. Video hardware: Intel i810 integrated video Help, I can only get command line linux :( thanks in advance. XFree86.0.log Description: Binary data XF86Config-4 Description: Binary data
[XFree86] crash
crashlog.txt Here is the crash log from /var/log/XFree86.0.log. I am using RedHat 7.3 Everything worked great untill i installed the Embedded Linux Development Kit from ftp.leo.org/pub/eldk/3.0/ppc-linux-x86. If you know how to fix this that would be great! David Bouthillier XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Jun 1 11:25:05 2004 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Matrox Millennium G550 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80b0, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card 1043,8070 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1e:0: chip 8086,244e card , rev 05 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2440 card , rev 05 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,244b card 1043,8028 rev 05 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2442 card 1043,8028 rev 05 class 0c,03,00 hdr 00 (II) PCI: 00:1f:4: chip 8086,2444 card 1043,8028 rev 05 class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 102b,2527 card 102b,0f84 rev 01 class 03,00,00 hdr 00 (II) PCI: 02:03:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00 (II) PCI: 02:04:0: chip 1033,0035 card 807d,0035 rev 41 class 0c,03,10 hdr 80 (II) PCI: 02:04:1: chip 1033,0035 card 807d,0035 rev 41 class 0c,03,10 hdr 00 (II) PCI: 02:04:2: chip 1033,00e0 card 807d,1043 rev 02 class 0c,03,20 hdr 00 (II) PCI: 02:0b:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00 (II) PCI: 02:0c:0: chip 10b8,0005 card 10b8,a011 rev 08 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xf480 - 0xf5df (0x160) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xf5f0 - 0xf7ff (0x210) MX[B] (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0xcc00
RE: [XFree86] Can't run X
Never mind... I figured it out. The Mandrake installer did not install all of the XFree86 packages. I manually installed them from the command line, and now X works. Thanks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Angela Burrell Sent: June 1, 2004 11:11 AM To: [EMAIL PROTECTED] Subject: [XFree86] Can't run X Hello I can't run the command startx (bash: startx: command not found) When I try to run X, the server crashes. Here's the information the website said to attach. 1. Copy of my XFree86 log file 2. XF86Config file 3. XFree 86 version: 4.3.0, 9 May 2003, X Protocol version 11, revision 0, Release 6.6 4. Operating system: Linux 2.4.22-10mdk (Linux Mandrake 9.2) 5. Video hardware: Intel i810 integrated video Help, I can only get command line linux :( thanks in advance. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] can't find keymapping file
I am trying to use XFree86/XDarwin. I don't have any keymapping files under /System/Library/Keyboards. In fact, there is no directory Keyboards under /System/Library. I am running OSX 10.3.4. Is there somewhere else where these files are found, or where can I get them? sincerely, tim johnson ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] [xterm] Tek 4014 graphics cursor
I've been digging through manpages and searching on Google, but I can't find anything that describes how to use the graphics cursor in the xterm Tek 4014 mode. There's plenty on what it does when you do use it, but I can't figure out how to activate it in the first place. Can anyone help? Thanks in advance. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] fatal error - no screen found
no screens found can happen for a number of reasons. The most common is that your video card is too new to be recognized by your version of XFree86. The server you are running is years old, so that is not suprising. XFree86 4.4 is the current version. Mark. On Tue, 1 Jun 2004, Lawrence Ha wrote: Hi I install RedHat 7.2 as a guest Operating system in Microsoft Virtual PC that run on Windows XP. But when I try to startx, it prompt me the error 'fatal server error - no screens found' and I examined the log file, and found out that (EE) - No devices detected. I am using Nvidia card, so when the setup start, I chosen the NVdia generic card, the version of XFree is 4.1.0. Lawrence Ha Technical Support Engineer TechSource Systems Sdn Bhd Tel : (603) 8076 1953 Fax : (603) 8076 1954 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Installation Problems on OS X
I recently downloaded the latest version of XFree86, 4.4.0. I am running OS X version 10.2.8 and I installed the necessary components: Extract XInstall.sh Xbin.tgz Xdoc.tgz Xetc.tgz Xfenc.tgz Xfnts.tgz Xlib.tgz Xman.tgz Xquartz.tgz Xxserv.tgz I placed them all into a folder called XFree 86 on my desktop. In the Terminal, I typed cd Desktop/XFree86 then, sh /Users/myname/Desktop/XFree86/Xinstall.sh The installation started, and I pressed y to continue. As I began installation, every file it began extracting gave the following error Could not Create file: Permission Denied. In the end, an application called XDarwin was created in my Applications folder, but it would not launch when opened. Since I am the administrator on my computer, (being the sole user) how can I give the XInstaller permission to write those files? Thank You, Alex Stork __ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Installation Problems on OS X
I recently downloaded the latest version of XFree86, 4.4.0. I am running OS X version 10.2.8 and I installed the necessary components: Extract XInstall.sh Xbin.tgz Xdoc.tgz Xetc.tgz Xfenc.tgz Xfnts.tgz Xlib.tgz Xman.tgz Xquartz.tgz Xxserv.tgz I placed them all into a folder called XFree 86 on my desktop. In the Terminal, I typed cd Desktop/XFree86 then, sh /Users/myname/Desktop/XFree86/Xinstall.sh The installation started, and I pressed y to continue. As I began installation, every file it began extracting gave the following error Could not Create file: Permission Denied. In the end, an application called XDarwin was created in my Applications folder, but it would not launch when opened. Since I am the administrator on my computer, (being the sole user) how can I give the XInstaller permission to write those files? Thank You, Alex Stork __ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
hello i own 3 versions of freebsd 4.3 4.8 and 5.1 all of which have the same problem when i start x the screen is to big so big infact its unreadable ive tried using the - and + to change resolutions didnt do anything my video card is the S3 Graphics ProSavageDDR if that helps
[XFree86] ATI Radeon 7500LE
I still can't send log file or my Config file, but I have tried a number of things and I can't use a depth of greater than 15 bits Radeon 7500LE XFree86 4.3.0 If I try to set a depth greater than 15, when I run startx, it crashes and all soutput to my monitor stops. It appears that the log file does not get written to in this case. The crash must occur before the first file I/O to the log file. I have to reset my machine. Any ideas, anyone else experienced this? Is 4.4.0 supposed to have better support for the radeon? thanks don ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] xf_4_4_99_3 + radeon9200 problem
Have to answer myself (problem was in front of my screen): On Montag, 31. Mai 2004 08:33, Stefan Lucke wrote: Hi, with XFree I got a problem when running with kernel 2.6.6. DRI does not work. glxgears is reporting about 144fps vs. 2200fps when running with kernel 2.4.21-192-default (SuSE). Same behaviour when radeonfb is not loaded. .. .. drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Linux agpgart interface v0.100 (c) Dave Jones Here is something missing: Loading the module for AGP chipset. Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xd000 So it is now and fps is up again :-). [drm] Initialized radeon 1.9.0 20020828 on minor 0 [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [drm:radeon_unlock] *ERROR* Process 6477 using kernel context 0 Linux video capture interface: v1.00 .. -- Stefan Lucke ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
