Re: [XFree86] (no subject)
On Fri, 26 Dec 2003, Kamlesh Kushwaha wrote: i can not start the Xserver(your graphical interface).it is likely that it is not set up correctly.would you like to view the Xserver output to diagnoise the problem.y/n Configure your X using the tool redhat-config-xfree86. Check whether your card is supported by X ?? HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is drop, Unknown is OCEAN ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] auto detect
On Thu, 18 Dec 2003, Paras pradhan wrote: How do i auto detect my horizsync , vertrefresh using XFree86 -configure? is it possble? If your Monitor is Plug-in-Play then it is possible by simple selecting the monitor from the list. Otherwise you can use xvidtune tool. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is drop, Unknown is OCEAN ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] X with FB
On Wed, 17 Dec 2003, vivek wrote: I need to run the X with frame buffer. How should I do it ? You shld the load the fbdevhw modules. And set the device-driver to fbdev. I am NOT sure. Someone plz correct it. Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! No font is avial in that folder. You can smilply remove/comment that entry from /etc/X11/fs/config OR XF86Config. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is drop, Unknown is OCEAN ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem with startx
On Wed, 17 Dec 2003, Nagalakshmi GVK wrote: as root type: startx to start x windows system but gives error message No screens found .Unable to oen/locate config file. configuring XF86config file gave error.scanpci -v is attached. Warning: Ur installing old vertion of X. It may not support ur new VGA Card. Anyway try to configure X and VGA Card using XConfiguarator and test. Bye :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is drop, Unknown is OCEAN ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] My X Window system does not start , just Leaving this message Given bellow !! Help ME !!
On Mon, 8 Dec 2003, Gitartha Saikia wrote: XFree86 Version 4.0.3 / X Window System (--) PCI:*(0:9:0) SiS unknown chipset (0x0204) Some SiS Card does not have support in X and X version is also very old. So try to upgrade to new and test :) Bye :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is drop, Unknown is OCEAN ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Display Problem
On Fri, 28 Nov 2003, Prabhu Basavalingam wrote: I have installed Linux 7.3 in my system. My system's display card is Acer 713. Acer713 is monitor type. Find out the video card detail (man lspci). Presently intel 810 driver module is used. I hope, this module may not be the right modules. Also read the man i810 and try setting options correctly. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is Drop, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86 on Sony VAIO Laptop
On Thu, 13 Nov 2003, indra sarkar wrote: i've set up my new PCG-GRT786M as a dualboot system with redhat7.2. All is well apart from the Xfree86 server which refuses to start. If I understood ur problem correctly :) Some of the new cards will not be suppoted by the old X. Even if you install the nVidia path, won't wrok. Bcoz I need the new version of Kernel. Butter switch to new version, like MDK9.1 / Slackware 9.1 ... HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Linux error
On Wed, 5 Nov 2003, Manjunath Mahashetti wrote: (EE) Unable to locate/open config file /etc/X11/XF86Config file is missing in your system. Configure the X in ur system using redhat-config-xfree86 command. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] font warning
Hello All, I am using xtt module in my X. I am getting the following msg. Warning: font renderer for .TTF already registered at priority 10 Warning: font renderer for .TTC already registered at priority 10 Bye :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Security with obscurity is good, relying on security through obscurity is bad. -- Brian ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] X Windows not running
On Wed, 29 Oct 2003, Krishnan Iyer wrote: 1. XFree86 version - 4.1.0 Intel 82845G/GE/GL/GV This card is not supported by X 4.1.0 upgrade to new X. -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] How to adjust gamma with SiS 740?
On Fri, 17 Oct 2003, Markus Karg wrote: Look into the X log. It will tell you. Actually I'm a silly user and neither know how to look into the X log nor how to examine the driver version. :-( How do you do that? vi /var/log/XFree86.log Look for Chipset OR Check the lines start with (--) HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Security with obscurity is good, relying on security through obscurity is bad. -- Brian ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] See this log file , i`m getting errors with xfs sayin can`t open fixed fonts
On Thu, 9 Oct 2003, Suresh Babu wrote: Hai, X Font Server is not running in your machine. start/restart it mannually and start the X. As root : /etc/rc.d/init.d/xfs restart HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
Could not init font path element unix/:7100, removing from list! Fatal server error: could not open default font 'fixed' xfs is not running. /etc/rc.d/init.d/xfs restart may help you. Bye :) -- Bharathi S, Linux Demo Day @ MIT [27 28, Sep, 2003] http://www.chennailug.org/ldd.html ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Gnome XkbTranslateKeySym
Hello All, Just to understand the flow of Key Event, I added one Print Stat in some of the funtion in XKBBind.c file. Whenever I ran KDE Apps, like Kword, Kedit ..., Ctrl in coming inside the XkbTranslateKeySym function. When I ran Gnome Apps like Gedit, Ctrl is not coming inside the XkbTranslateKeySym function. But Chars are shown correctly in the App. From where gnome will get the Char ? Is there any other methods avail in Xlib to do this job. Thanks, -- Bharathi S, Linux Demo Day @ MIT [27 28, Sep, 2003] http://www.chennailug.org/ldd.html ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Trouble to load REDHAT LINUX in P4 machine
On Mon, 15 Sep 2003, Shobhan Mandal wrote: I have a P4(1.7 Ghz) machine having INTEL Original 845 GLAD motherboard. I have tried to load linux 8.2 in my machine. I can not Install the new X OR download the driver for Intel845 from http://support.intel.com/support/graphics/linux/graphics.htm HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Find Fake Event
Hello All, How to differentiate the Fake Event from Normal Event ? TIA, -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Event Forwarding
Hello All, Is it possible to forward a keyboard event from one window/App to another window/App ? Thanks :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] switch for twm to KDE???
On Wed, 20 Aug 2003, Liam Curran wrote: I switch from KDE to twn I need to get it back to KDE edit ~/.Xclient-default # exec twm# Comment it exec startkde # Add this OR use 'switchdesk KDE' command HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] KB Mapping (Again)
Hello All, Is it possible to change the behavier of the KB as follows, Input - Output K - A Ka - B Kaa - C Kaay - CY Mapping Multiple keys to single Glyph/Unicode. I gone thru Xvkb. But it is NOT useful for me. Bcoz I want to input from the KB, Not thru mouse. I also going thru xscope and xev. Any idea/ tips ? Is it possible change the xvkb to get the input from KB ? My aim is to develope a app like keyman(Windoz App). Thanks :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Japanese fonts
On Mon, 18 Aug 2003, Rob Taft wrote: Anyone? Someone has to know how to do this. 1. Check the dir list in XF86Config is equal to the /etc/X11/fs/config 2. Are you loading freetype and type1 modules in XF86Config ? HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
On Mon, 18 Aug 2003, nanda gopal wrote: P4M266a Mercury Chipset,dispaly card is S3 graphics prosavage FATAL SERVER ERROR NO SCREEN FOUND I am NOT sure abt the support for the S3. So try to install in new release of X OR Try to reconfigure ur X using XConfigurator. Again if you get the same error, send xf86config and xfree.log files. what is the problem? i need ur help.plz guide me.i have GRUB for multi booting i.e i have win xp and win 98 in my harddisk. iam the Read the GRUB Manual page( /usr/share/doc/grub-xyz ) Check the sample files. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem related to server crash
On Tue, 5 Aug 2003, Reshmi Jain wrote: Please check the attachment. When i try to execute the startx command following error message is displaced. What may the reason? X Font Server may not be running. Try to start/restart your XFS. /etc/rc.d/init.d/xfst status /etc/rc.d/init.d/xfs restart OR start HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem with Intel 82845G/GL
I have a DELL PC with Intel Chipset 82845G/GL. I am not able to get resolution beyond 640x480 with 16-bit color. If I use color depth of 8, then I can go upto 1024x768. I have installed RedHat 9.0. Please find the XF86Config and the log file attached. Try after increasing the VRAM size to 32MB OR reconfigure the X. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Unicode Support
On Mon, 11 Aug 2003, Paras pradhan wrote: yes i similar to hindi.. yes i have pango installed. and i have nepali font too. but i get boxes when i type. 1. Nepali language is having any slot in Unicode table ? 2. Your getting box, due non availability of the font. So check whether your font is available in the font list ? if not, try to update ur font database and then try. 3. For testing, try to open already existing Unicode Nepali contents in Gedit. 4. Also **check** for Nepali support in Pango. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
On Tue, 22 Jul 2003, kaustubh joshi wrote: I have problem starting X-windows xfs is not running. /etc/rc.d/init.d/xfs restart OR start (root permission needed ) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] where are the docs?
On Mon, 21 Jul 2003 [EMAIL PROTECTED] wrote: im looking for docs about the (sub)modules included in libextmod. which is f.e. MIT-SCREENSAVER, BIG-REQUESTS, SYNC, etc. /usr/share/doc/XFree86-doc-4.3.0 OR xfree86.org HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] News Letters
Hello All, Is there any idea to bring news letter kind of thing. Just to give an intro abt the unused useful commands and Tips ... etc. Bcoz after joining in the list only, I came to know abt some new commands(xrandr) and I am still learning :) If already anything exist like this, Kindly give links. Thanks, -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] problem in X
On Tue, 1 Jul 2003, V. Jagadesh Lee wrote: With 4.3.0 XFree86 there are a lot of new hardware supported but it Vinoth is using 4.3.0, So I think, Problem may be due to the wrong settings. Usally X will use the VT7, but here X is trying to open VT3. Try to reconfigure ur X and test :) Tool - redhat-config-xfree Subject: [XFree86] problem in X Fatal server error: xf86OpenConsole: Cannot open virtual console 3 (No such file or directory) Bye :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFS Stop
Hello All, Is it adviceable to stop the XFS after adding font paths in the XF86Config file ? TIA, -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Red Hat Linux 9 booting problem.
On Thu, 19 Jun 2003, Pankaj Sarda wrote: I am NOT sure abt the problem. Bcoz modules for i810 VCard is by default coming with X. But log file is show that modules not found. Try to reconfigure ur X using redhat-config-xfree command and check again. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] A problem unsolvable by a newbie
On Thu, 19 Jun 2003, Ray Yao wrote: Use 'xinit' command to start the X alone, with out any window mangers like KDE, Gnome etc... If xinit gives terminal for you, then X is configured correctly and Problem is only with Window manger. So try to switch to different window managers like gnome, fvwm, window maker, etc ... HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86 - KDE
On 15 Jun 2003, Vijay Kumar wrote: How should i configure KDE to come as default WM ? Modify the ~/.Xclients-default file OR use switchdesk cmd. 'startkde' is the command to start the KDE WM. Bye :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
On Thu, 12 Jun 2003, Rizvi Inamdar wrote: what is the command used for configuring X windows. In 7.x ver xconfig was there but in linux8 this is not there. redhat-config-xfree86 -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Not able to Start Any GUI (XServer/CDE)
On 11 Jun 2003, Vijay Kumar wrote: (EE) Unable to locate/open config file /etc/X11/XF86Config-4 file is NOT found. Bcoz X is not yet configured in your system. So Configure it, by using redhat-config-xfree86 command (root permission is needed). Bye :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Learn By Listening. Understand By Reflecting. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] project help..
On 2 Jun 2003, varsha nerlekar wrote: Failed to load module 3DLabs(module does not exist,0). loading /usr/X11R6/lib/modules/input/ mouse_drv 0 no driver available fatal server error:no screens found. Your server doesn't have the modules which are needed for your card and X. OR the XF86Config-4 file may have some wrong values. HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Don't scream for the Change. Become the Change. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Slow X strart up...
Hello All, 1. In my machine (MDK9, PIII 450, 128MB, i810), X (With out WM) startup is taking very long time ( nearly 2 min ). I am attechted the Log file. 2. Presently X is starting VT 7. But i want to start in vt 11/12. How to change the settings ? TIA, -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Don't scream for the Change. Become the Change. XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 07 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed May 28 14:38:45 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000fd0c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7120 card 8086,7120 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7121 card 8086,7121 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 4352,5934 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:09:0: chip 10ec,8029 card , rev 00 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xd000/26, 0xd400/19 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xd400 - 0xd407 (0x8) MX[B](B) [1] -1 0 0xd000 - 0xd3ff (0x400) MX[B](B) [2] -1 0 0xc000
[I18n] Unicode
Hello, How to send a 16Bit Unicode value to a Application ? If I use the XmodMap, then Which Xlib function is responsible for taking the Unicode Value frm XModMap ? When I try to track the values inside the XKbtranslateKeysym(), I got only Zeros !!! How to find the flow of Key-Events from Xserver to XApplication ? [ Different Application OR ToolKits are using different Xlib OR Own functions to get Final Char to display. ] Someone can give me a clear picture of the KeyEvent flow and conversion ( particularly KeySym to Encoding) ? Thanks, -- Bharathi S ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
Re: [Xpert]TrueType font rendering
On Mon, 9 Dec 2002, Alessandro A. wrote: Which is the best way to do font rendering? Which is the best font server? xfstt or xfs? XFS with Modules for freetype and Truetype font supports is the best. Plz correct me if it wrong. Bye :) -- Bharathi S, BSB-364 DONLab, IIT-Madras, INDIA If What is truth ? the question be, It is to speak out evil-free. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Unicode / 16-Bit
Hello All, Is the X (4.x) supporting Unicode/16 Bit encoding ? How ? For 8 Bit (ASCII/Latin1) LookUpSym function gives the Char. For 16 bit, Which founction will do the mapping ? Is it possible to differtiate the application supporting 8bit (Xdrawstring() ) OR 16bit ( XDrawsting16()) applications ? How to display Unicode char in 8Bit application ? How to differtiate that the incoming char is 8/16 Bit in Xlib ? Bye :) -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [I18n]XIM / XOM]
On Oct 23 at 12:56pm, Hideki Hiura mailed Me too : From: Prabhat [EMAIL PROTECTED] possibly sriram or hideki can help. Sriram is currently developing the input method engine for Indic scripts for iiimf, listed as UNIT on the engine/dashboard section of the web page above. Sriram knows exact day-to-day status. This will be released within a few weeks as a part of im-sdk. You can add/modify your own transliteration mappings, since those data is externalized in file. Hello Mr Hideki, Till now I didn't get the status info of the Indic support. Is it possible for you, Plz make a link bw us. :) That will help to improve the quality and reduce the repetition of the work. Bye :) -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
Re:[I18n] XIM / XOM
Hello All, http://www.li18nux.org/iiimf/ Can u make the IM-SDK as easily downloadable manner. Something like HTTP / FTP. Not from CVS. Is it possible ??? Sriram is currently developing the input method engine for Indic scripts for iiimf, listed as UNIT on the engine/dashboard section of the web page above. Where can I get the current status / implemetation of XIM/XOM for Indian Languages. Sriram, Can u update the website / Give the some links to me ? Last month, I seen lot discussion abt XIM in the list. But for my req, I got very few reply and help only :( People, those who r working with XIM, Can u help me in this. Thanks, -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
Re: [Xpert]XTestFakeKeyEvent - Problem
On Oct 24 at 9:56pm, Henrik Sandklef mailed Me too : missing some of Events. I haven't seen the problem you've described. I have used XTest a long time without problem. Take a look at Xnee if you want to look at some source code using XTest As Vamsi Krishana said, We also feced same type problem when using XTestFakeKeyEvent function. So we added small time delay in that. Eventhought sometime we are missing some of the events. :( Anyway I will look into your codes for more info :) Bye :) -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[I18n]XIM / XOM
Hello All, I am trying to write one basic/simple XIM for any one of the Indian Language ( Tamil ). But the problem is I cun't find any basic info abt XIM Server programming infos. I need help from the people those who working or worked with XIM Server programming. Help me for writing some BASIC XIM, Which will return two char for every single English char OR something like this. Already I wasted nearly 3 months in this. I have downloaded XCIN to find out the what is happening inside the XIM. But it is very difficult for me to understand the code. :( I downloaded IMdkit, I found a sampleIM program in doc folder. Presently I going thru the CODE. Still I can't able to find the tech behind, How the event from app is transfered to XIM and what are the ENV variables used for that etc. Can anyone give clear idea about XIM Server programming Thanks, -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
[Xpert]XIM / XOM
Hello All, I am trying to write one basic/simple XIM for any one of the Indian Language ( Tamil ). But the problem is I cun't find any basic info abt XIM Server programming infos. I need help from the people those who working or worked with XIM Server programming. Help me for writing some BASIC XIM, Which will return two char for every single English char OR something like this. Already I wasted nearly 3 months in this. I have downloaded XCIN to find out the what is happening inside the XIM. But it is very difficult for me to understand the code. :( I downloaded IMdkit, I found a sampleIM program in doc folder. Presently I going thru the CODE. Still I can't able to find the tech behind, How the event from app is transfered to XIM and what are the ENV variables used for that etc. Can anyone give clear idea about XIM Server programming Thanks, -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]X-Programming
Today at 4:47pm, Yo mailed to Me too : Hello, I am a now Spanish :) member of the list and i wanted info about programming in x11: if in archives list there are some tutorials or some web. http://www.kerguelen.org/x/index.html http://www.rahul.net/kenton/ http://www.tronche.com/gui/x/xlib-tutorial/ HTH, Enjoy :) -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]6 head xinerama
Today at 12:06pm, [EMAIL PROTECTED] mailed to Me too : Third card, G450 PCI Same as above, but pointer also leaves trails, on both screens. Remove comment and try # Option sw_cursor HTH :) -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]X Seesion Can run only one time
On Sep 29 at 11:47am, Rojana Leecharoen mailed to Me too : hang). There were some error messages appear when X was shutdown. i do not know where I can find the log file for that. If anybody could help me, I would really appeciate it. Log file @ /var/log/XFree86.0.log Some doc file related to Mother board is avail @ /usr/X11R6/lib/X11/doc/ HTH, -- Bharathi S, IndLinuX Team, (__) DONLab, TeNeT Group, oo / IIT-Madras, Chennai-INDIA. (_/\ ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Noises during playing sounds
On Tue, 17 Sep 2002, Antonio Bibiano wrote: When I play some sounds and I move a window or scroll a page I ear some clicking noises, I have a sound blaster live! (with ALSA module There is some reason to my problem??? I am also faced is problem in my machine ( Intel 810 ). But after re-fixing [ Change the polarity - In AC polarity has no meaning :) ] the speaker power plug, the clicking nosies stoped. Bye -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- The words of mouth are of no use When eye to eye agrees the gaze. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[I18n]XIM XOM ???
Hello All, Can anyone help me ? This 2nd time, I am posting it. TIA, -- Forwarded message -- Date: Tue, 20 Aug 2002 10:05:09 +0530 (IST) To: [EMAIL PROTECTED] Hello All, I want to write a XIM and XOM for Indian Language. I got some suggestions XCIN Developer also. But I want to write a Encoding based XIM, XIM should be independent of language and font. I want to use ISCII as my Encoding. So I can transliterate to any language at run-time. It should be handled by XOM (?). Simple Layout : == Input | \|/ XIM -- ASCII to FIE Rule file. | ISCII is NOT a permentent. User can able | to use any kind of Encoding ( to Unicode, to TSCII, | etc ), So it will become Encoding Free XIM (?) \|/ File / Memory - FIE (Font Independent Encoding) | \|/ XOM -- FIE to Glyph Rule file for every Language. | @ Runtime depending upon the user Lang setting | correct rule file is selected. \|/ Display FIE to Glyph mapping is 1:1 / 2:1 / 1:2 / ... *:* Bcoz of the mapping Cursor handling is become a big problem. * Correct me if anything wrong in the above. * Comments and suggestion are welcome :) * I am not an Xpert :) -- ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
[Xpert]Re: [I18n]drawing keysyms on screen
On 22 Aug 2002, Mohammed Sameer wrote: if so please direct me to the correct one List: [EMAIL PROTECTED] for example when it receives the key A it should convert it to a 0x05c That's nt the problem but the problem is how to convert the 0x05c to a In the X-Window system, X server generates either KeyPressed or KeyRelease event when user presses the key or releases the key and send the event to the application. The generated events contains keycodes and keysyms. For translating meaningful characters from the keycode generated by the keyboard envoles mainly two steps. The first step involves translating the keycodes which is hardware DEPENDENT to a symbolic name known as keysym which is hardware INDEPENENT. * The second step involves converting the keysym to an ASCII code that can be used for displaying, saving in files or buffers. In order to provide Native language support, we can add one more step to the above to steps to convert Eng to Native. Bye :) -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Leaving ripe fruits the raw he eats Who speaks harsh when sweet words suits. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [I18n]Malayalam XKB,locale,font etc.
On Tue, 20 Aug 2002, Baiju M wrote: Hello All, I want to write a XIM and XOM for Indian Language. I got some suggestions XCIN Developer also. But I want to write a Encoding based XIM, XIM should be independent of language and font. I want to use ISCII as my Encoding. So I can transliterate to any language at run-time. It should be handled by XOM (?). Simple Layout : == Input | \|/ XIM -- ASCII to FIE Rule file. | ISCII is NOT a permentent. User can able | to use any kind of Encoding ( to Unicode, to TSCII, | etc ), So it will become Encoding Free XIM (?) \|/ File / Memory - FIE (Font Independent Encoding) | \|/ XOM -- FIE to Glyph Rule file for every Language. | @ Runtime depending upon the user Lang setting | correct rule file is selected. \|/ Display FIE to Glyph mapping is 1:1 / 2:1 / 1:2 / ... *:* Bcoz of the mapping Cursor handling is become a big problem. Can you help me ? * Correct me if anything wrong in the above. * Comments and suggestion are welcome :) * I am not an Xpert :) Thanks to all, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Even demand become a joy When the thing comes without annoy. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ I18n mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/i18n
Re: [Xpert]Re: Is the XFree development stuck in a dead end?
We need the X-newbies website - www.x-newbies.org ;) It is very important and XFree86 should publish a book for BASIC X window concept. It should explain all basic concepts of the Xwindow with example picture etc. Presently in Xfree86 very very less no.of picture are available to explain. Already existing books may be good. But not for newbies. More ( Correct ) information should be given to Future Xperts :) Bye :) -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Some food for the stomach is brought When the ear get no food for thought. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Basic QUS
Hello All, If i am running one client application in local machine and the remote server sends the event, Expose Event, notifications to the client application thru XProtocol. Now client application need to redraw its content in the local machine screen. For this Expose operation whether Client application will contact the remote server [ server does not know client machine HW, server is responsible for all HW related operations(?) ] OR it will handle locally. [ Thru Xserver only we can contact the HW(?), Locally there no Xserver ] Explain the steps related to it. Thanks, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Like friendship what's so hard to gain? That guards one against acts villain? *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Text Cursor API ?
Hello All, Text Cursor is very important for most of the Application. Why there is no separate API for handling the Text Cursor @ Xlib level ? Plz explain the reason for not including Text Cursor API in Xlib. If there is any plan to add this type of APIs in future ? TIA, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Self-rule leads to realms of gods Indulgence leads to gloomy hades. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Cursor API ?
Hello All, Cursor is very important for most of the Application. Why there is no separate API for the cursor handling in Xlib ? TIA -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Self-rule leads to realms of gods Indulgence leads to gloomy hades. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Fake Event
On 26 May 2002, Henrik Sandklef wrote: You can use XTest extension to do this You can look at xnee for an example on how to use XTest http://xnee.sourceforge.net How to download the source code from this site ? :( It is possible to generate the Fake Event inside the Xlib Function ? XSendEvent(dpy, winID, propagate, event_mask, event ) If i didn't give the window id ( Bcoz i don't know ) Pl give some example :) If there is any separeate list is there for Xlib :) On Fri, 2002-05-24 at 17:50, Bharathi S wrote: Whenever an keypress event occure i want to generate one more keypress event. The 2nd keypress should go with frist event keycode. And the 1st event should go with my own keycode. TIA, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Like sent in bud secrets conceal In the bosom of her half smile. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]adding more keyboards and mice
On Mon, 27 May 2002 [EMAIL PROTECTED] wrote: I saw a demo of Linux + XFree86 4.1.0 with 4 DISPLAY( Mon,KB, mouse). Yeah, I have that working too. But next time you see it, try switching to a console, or running a DGA app... and then run fast. :-))) Yes i will try :-) what is DGA app fast ?? TIA, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Self-rule leads to realms of gods Indulgence leads to gloomy hades. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]adding more keyboards and mice
Hello all, I saw a demo of Linux + XFree86 4.1.0 with 4 DISPLAY( Mon,KB, mouse). All USB KBs are connected to a MiniUSB Hub and Hub is connected to machine, And USB mouses also connected in similar way. At the time booting, they started 4 GDM. Each Display having separate Config File. They modified the Xserver code so that all KBs and mouses are not mapped as single. I don't known more detail about it. TIA, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Not to laugh is friendship made But to hit when faults exceed. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Fake Event
Hello all, Whenever an keypress event occure i want to generate one more keypress event. The 2nd keypress should go with frist event keycode. And the 1st event should go with my own keycode. It is possible to generate the fake event inside XkbLookupkeyshm() -*- XKBBind.c -*- Xlib function. Bcoz QT getting the event from this function only. TIA Bye, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- The virtue-killer may be saved Not benefit-killer wo is damned. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]TrueType fonts
On Mon, 20 May 2002, PJourdan wrote: But when I logout and startx, the fonts are no longer there. Redoing xset produces errors: xset: bad font path element (#37), possible causes are: Hello all, We are also having same problem. Every time we are restarting the xfstt ( kill start ). This problem occure in RH and MDK. But in some RH 7.1 xset is not giving problem. I red that New X is supporting the TTF What does it mean ? ThanX, Bharathi S -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Lore worth learning, learn flawlessly Live by that learning thoroughly. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Backspace
Hello all, Weather it is possible to sent the BackSpace to application ? Suppose already some char is displayed in SCR. But before displaying my next char the already existing char should be deleted and display the current char in that position. I try to send the Backspace / DEL char (8 / 127) from XkbTranslateKeySym() (XKBBind.c). but application ( Kword etc...) display it as space. How to do it? ( For Multiple keystroke to single Glyph ) TIA, Bharathi S -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- The virtue-killer may be saved Not benefit-killer wo is damned. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]L10n or I18n Txt Funs
On Sat, 4 May 2002, Chuck Slivkoff wrote: Bharathi S wrote: Mapping Multi KeyStrocks to Single Glyph. If i press 'B' followed by 'A' then C shuld apper on the screen. 1. It is possiple to do with XModMap or @Xlib 2. I saw some doc(CH13) in X source code, in that i am reading about l10n and i18n Text functions... ( Preediting Concepts ). Whether this functions implemented in NewX or still in design stage. If the functions are avilable How to use it ? I believe what you are looking for is information on implimenting an Input Method Server. The i18n code that Sun contributed includes an SDK. IMS in available in present X. How to use it ? Whether we have develope useing the new lib functions OR it is possible to make the present aplications to use this lib ? TIA, Bharathi S -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Even demand become a joy When the thing comes without annoy. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]L10n or I18n Txt Funs
Hello All, If i press 'A' then 'A' will displayed on Screen. If i press 'B' then 'B' will displayed on Screen. What i need is ? Mapping Multi KeyStrocks to Single Glyph. If i press 'B' followed by 'A' then C shuld apper on the screen. 1. It is possiple to do with XModMap or @Xlib 2. I saw some doc(CH13) in X source code, in that i am reading about l10n and i18n Text functions... ( Preediting Concepts ). Whether this functions implemented in NewX or still in design stage. If the functions are avilable How to use it ? 3. Any FUNCTION CALL flowchat avilable for the follwing How keypress is transfered to application? How the application calculated the width ? If anyone working on l10n or i18n plz help. TIA -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Learning is wealth none could destroy Nothing else gives genuine joy. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Fonts
Hello All, If run a Xapplication from remote machine, the Xapplication takes the fonts from local machine or remote machine ? How to make xfs to support TureType Fonts ? Presently i am setting font path every time xset fp+ unix/:7101 -- 7101 is XFSTT Port#. TIA -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Farming though hard is foremost trade Men ply at will but ploughmen lead. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
RE: [Xpert]XServer Programming
On Sat, 27 Apr 2002, Balarama Chandra N R wrote: If you want to build X-Server, No. In case if you are looking for knowing the architectrual details of X-Server I have some PDF's, let me know I will forward the same. Yes, I want to know abt arch of XServer. Already i requested some idea for solving the below problem. Sorry for reposting :( Date: Tue, 23 Apr 2002 17:45:03 +0530 (IST) From: Bharathi S [EMAIL PROTECTED] Subject: Re: [Xpert]Window ID On Mon, 22 Apr 2002, Vladimir Dergachev wrote: On Mon, 22 Apr 2002, Bharathi S wrote: On Mon, 22 Apr 2002, Vladimir Dergachev wrote: How find the window id by using the following structures Display, Drawable, Graphics Context ? AFAIK, Window id is the same thing as the drawable, provided the drawable points to the window. I.e. where the man page says Xblahblah function takes a drawable as an argument it means that you can either pass a window id or a pixmap (but not XImage) handle to it. Most of the functions taking Pixmap(DRAWABLE) as argument. I need the window id for maintaining a virtual buffer and window id as the key. You lost me at this point. Could you provide more detail about what is it you are trying to do ? Is it in the user application or in Xserver code ? Thanks to all for the reply. All our modification is only in XLIB. If it is not possible at Xlib level, we may move to XServer. If we did this modification in the XLib, the application running on top xlib will automatically inherit this facility. KeyBoard | \|/ keycode | \|/ keysym(ASCII) | \|/ ISCII - File | | \|/ Display XDrawString() / XDrawImageString() Inside this functions I am doing the Encoding to Glyph code conversion The Resulting Glyph is sent for display. ( No of resulting glyph code may not equal to the No of Encoding code ) :( | | \|/ XDrawLine() to move the Cursor Application calculating the cursor position or width based on the Encoding code. It should calculate the new position based on the resulting glyph. So when ever application try to move the cursor position we have to calculate the new position by converting the encoding to glyph. But for XDrawLine, App won't send the strings So I planned to store the encoding codes coming to the XDrawString / XDrawImageString in a List of VirtualWindowBuffer ( Window ID as Key ) VirtualWindowBuffer -- 2 Dimension Array and one KeyID Inside the XDrawLine i will find the VirtualWindowBuffer and I will take the Whole line VirtualWindowBuffer(x, y) and i am calculating the new position. i tried Pixmap value as ID. But pixmap is keep on changing. :( TIA, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- A help rendered in hour of need Though small is greater then the world. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]XServer Programming
Hello All, I want to know about XServer Programming Give some links or book name for good start. I searched in web. but i didn't get any useful links :( TIA, Bye, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Self-rule leads to realms of gods Indulgence leads to gloomy hades. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Window ID
On Mon, 22 Apr 2002, Vladimir Dergachev wrote: On Mon, 22 Apr 2002, Bharathi S wrote: On Mon, 22 Apr 2002, Vladimir Dergachev wrote: How find the window id by using the following structures Display, Drawable, Graphics Context ? AFAIK, Window id is the same thing as the drawable, provided the drawable points to the window. I.e. where the man page says Xblahblah function takes a drawable as an argument it means that you can either pass a window id or a pixmap (but not XImage) handle to it. Most of the functions taking Pixmap(DRAWABLE) as argument. I need the window id for maintaining a virtual buffer and window id as the key. You lost me at this point. Could you provide more detail about what is it you are trying to do ? Is it in the user application or in Xserver code ? Thanks to all for the reply. All our modification is only in XLIB. If it is not possible at Xlib level, we may move to XServer. If we did this modification in the XLib, the application running on top xlib will automatically inherit this facility. KeyBoard | \|/ keycode | \|/ keysym(ASCII) | \|/ ISCII - File | | \|/ Display XDrawString() / XDrawImageString() Inside this functions I am doing the Encoding to Glyph code conversion The Resulting Glyph is sent for display. ( No of resulting glyph code may not equal to the No of Encoding code ) :( | | \|/ XDrawLine() to move the Cursor Application calculating the cursor position or width based on the Encoding code. It should calculate the new position based on the resulting glyph. So when ever application try to move the cursor position we have to calculate the new position by converting the encoding to glyph. But for XDrawLine, App won't send the strings So I planned to store the encoding codes coming to the XDrawString / XDrawImageString in a List of VirtualWindowBuffer ( Window ID as Key ) VirtualWindowBuffer -- 2 Dimension Array and one KeyID Inside the XDrawLine i will find the VirtualWindowBuffer and I will take the Whole line VirtualWindowBuffer(x, y) and i am calculating the new position. i tried Pixmap value as ID. But pixmap is keep on changing. :( Sorry for my bad english. :( Thank you, Bharathi S -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Even a single evil word Will turn all good results to bad. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Window ID
On Mon, 22 Apr 2002, Vladimir Dergachev wrote: How find the window id by using the following structures Display, Drawable, Graphics Context ? AFAIK, Window id is the same thing as the drawable, provided the drawable points to the window. I.e. where the man page says Xblahblah function takes a drawable as an argument it means that you can either pass a window id or a pixmap (but not XImage) handle to it. Thank you Vladimir Dergachev Most of the functions taking Pixmap(DRAWABLE) as argument. I need the window id for maintaining a virtual buffer and window id as the key. How the Xserver finding the window id ? Bcoz we are sending only dpy, pixmap, GC ! Thank you, Bharathi S -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- The words of mouth are of no use When eye to eye agrees the gaze. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
Re: [Xpert]Drawable
On Thu, 18 Apr 2002, Mark Vojkovich wrote: How to differentiate in XDrawLine that this call for Line Cursor and this for normal Line drawing ? I don't understand the question. Sorry. I am new to Xlib. So can't able to explain my problem. What does XDrawLine have to do with Cursors? In KOffice the cursor visible in the window is a line for drawing that Line they are calling the XDrawline. Here we are doing some experiment in Xlib for supporting our Local languages in X. So we have to manipulate the position of the cursor. Thank you for ur reply, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Lore worth learning, learn flawlessly Live by that learning thoroughly. *In Tirukkural of Holy Tamil poet Tiruvalluvar. ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]Drawable
Hello All, How to differentiate in XDrawLine that this call for Line Cursor and this for normal Line drawing ? In single application, the drawable value in XDrawString is different from drawable value in XDrawLine. Why ? How to differentiate Pixmap and Window ? Thank you, -- --==| Bharathi S | BSB-364 DONLab | IIT-Madras |==-- Friendship hastens help in mishaps Like hands picking up dress that slips. *In Tirukkural of Holy Tamil poet Tiruvalluvar(200BC). ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
