[XFree86] Problems with proSavage DDR
Hi there, I have installed Red Hat 7.2 and it seems that it doesn't recognize my videocard proSavage DDR P4M266. I have already downloaded and tried several drivers for "savage_drv.o" but no one is working. So, please help me. I cannot start the X server and the error message is the following, taken /var/log/XFree86.0.log from : XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] Build Host: stripples.devel.redhat.com Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 8 21:53:12 2004 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "MultiSync 75" (**) | |-->Device "S3 Savage (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80008864, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3148 card 1106, rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0b:0: chip 127a,1003 card 13df,1003 rev 01 class 07,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3074 card 1106, rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 30 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 70 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xdfd0 - 0xdfef (0x20) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xcfb0 - 0xdfbf (0x1010) MX[B] (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) S3 unknown chipset (0x8d04) rev 0, Mem @ 0xdfe8/19, 0xd000/27, BIOS @ 0xdfe7/16 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B]
[XFree86] Problems with proSavage DDR
Hi there, I have installed Red Hat 7.2 and it seems that it doesn't recognize my videocard proSavage DDR P4M266. I have already downloaded and tried several drivers for "savage_drv.o" but no one is working. So, please help me. I cannot start the X server and the error message is the following, taken /var/log/XFree86.0.log from : XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] Build Host: stripples.devel.redhat.com Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 8 21:53:12 2004 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "MultiSync 75" (**) | |-->Device "S3 Savage (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80008864, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3148 card 1106, rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0b:0: chip 127a,1003 card 13df,1003 rev 01 class 07,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3074 card 1106, rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 30 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 70 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xdfd0 - 0xdfef (0x20) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xcfb0 - 0xdfbf (0x1010) MX[B] (II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) S3 unknown chipset (0x8d04) rev 0, Mem @ 0xdfe8/19, 0xd000/27, BIOS @ 0xdfe7/16 (II) Addressable bus resource ranges are [0] -1 0x - 0x (0x0) MX[B] [1] -1 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0x000f - 0x000f (0x1) MX[B] [3] -1 0x000c - 0x000e (0x3) MX[B]
[XFree86] Could not init font path element unix/:7100 -- >> Help me please !
Because the old version of XFree86 didn't recognize my proSavage videocard, I have updated the XFree86 with version 4.3.0. NOw it seems that I have another problem, with the fonts. What should I do to solve this problem ?? Here is the log file: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20 i686 [ELF] Build Date: 07 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 14 08:55:17 2004 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "MultiSync 75" (**) | |-->Device "Savage" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3148 card 1106, rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b091 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:0b:0: chip 127a,1003 card 13df,1003 rev 01 class 07,00,00 hdr 00 (II) PCI: 00:11:0: chip 1106,3074 card 1106, rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 30 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 70 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdfd0 - 0xdfef (0x20) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xcfb0 - 0xdfbf (0x1010) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) S3 Inc. [ProSavageDDR K4M266] rev 0, Mem @ 0xdfe8/19, 0xd000/27, BIOS @ 0xdfe7/16 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe800 from 0xebff to 0xe7ff (II) Active PCI resource ranges: [0] -1 0 0xdffeff00 - 0xdffe (0x100) MX[B] [1] -1 0 0xdfff - 0xdfff (0x1) MX[B] [2] -1 0 0xe800 - 0xe7ff (0x0) MX[B]O [3] -1 0 0xdfe7 - 0xdfe7 (0x1) MX[B](B) [4] -1 0 0xd000 - 0xd7ff (0x800) MX[B](B) [5] -1 0 0xdfe8 - 0xdfef (0x8) MX[B](B) [6] -1 0 0xdc00 - 0xdcff (0x100) IX[B] [7] -1 0 0xec00 - 0xecff
Re: [XFree86] Could not init font path element unix/:7100 -- >> Help me please !
Thank you for your answer, George. If you don't mind, how do I disable the font server and then how do I use the X server built-in font ?? Thank you again Sergiu Floca From: George Socker <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [XFree86] Could not init font path element unix/:7100-- >> Help me please ! Date: Wed, 14 Jan 2004 14:57:47 -0500 On Wednesday, January 14 2004 09:25 am, Floca-Maxim Sergiu wrote: > Because the old version of XFree86 didn't recognize my proSavage > videocard, I have updated the XFree86 with version 4.3.0. NOw it > seems that I have another problem, with the fonts. > [Log snipped] The font server is not running, so the required fonts cannot be loaded. Either figure out why the font server is not running, or disable it and use the X server built-in font handling. > Could not init font path element unix/:7100, removing from list! > > Fatal server error: > could not open default font 'fixed' > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > _ > STOP MORE SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 << attach3 >> _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Could not init font path element unix/:7100 -- >> Help me please !
Thank you for your answer, George. If you don't mind, how do I disable the font server and then how do I use the X server built-in font ?? Thank you again Sergiu Floca From: George Socker <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: [XFree86] Could not init font path element unix/:7100-- >> Help me please ! Date: Wed, 14 Jan 2004 14:57:47 -0500 On Wednesday, January 14 2004 09:25 am, Floca-Maxim Sergiu wrote: > Because the old version of XFree86 didn't recognize my proSavage > videocard, I have updated the XFree86 with version 4.3.0. NOw it > seems that I have another problem, with the fonts. > [Log snipped] The font server is not running, so the required fonts cannot be loaded. Either figure out why the font server is not running, or disable it and use the X server built-in font handling. > Could not init font path element unix/:7100, removing from list! > > Fatal server error: > could not open default font 'fixed' > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > _ > STOP MORE SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 << attach3 >> _ Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86