[XFree86] Real release date of Xfree 4.3.0.2
Hi, when is going to be releast the Xfree 4.3.0.2 ??? The web site say´s this: XFree86 4.3.0.2 (xx September 2003) Saludos Marcel - M3 Linux User #328858 http://counter.li.org/
RE: [XFree86] on a ProSavage8 card
xfree 4.3 on mdk 9.1 already have the Tim RobertÂs driver. > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Pablo Rodriguez > Enviado el: jueves, 04 de diciembre de 2003 7:15 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] on a ProSavage8 card > > > Hi there, > > I bought an Acer Aspire 1353LM a month ago and I have > installed MDK 9.1. > The graphic card is a S3ProSavage8 8ÃAGP. MDK uses the vesa driver for > it, that works fine, excepting some flickering when watching dvds with > mplayer (or any dvd player). > > I wanted to install the proper driver (the one from Tim > Roberts), but it > didn't work. Tim told me that the chipset is actually a CastleRock one > and that the 4.4 version of the XFree86 will support it. Is > there no way > to have a driver for the 4.3 version? (I have been using > Linux for less > than a month and upgrading XFree86 won't be an easy task.) > > Many thanks for your excellent work, > > > Pablo > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] XFree86 on Sony VAIO Laptop
With installed NVIDIA-Linux-x86-1.0-4496-pkg2.run as per README The new nVidia-based video card works just fine, but Open Office gives a Segmentation fault, and Xmms, same issue! This works with the last Xfree86 CVS but there is no 3D support Saludos Marcel - M3 Linux User #328858 http://counter.li.org/ > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Mark Vojkovich > Enviado el: jueves, 13 de noviembre de 2003 15:32 > Para: indra sarkar > CC: [EMAIL PROTECTED] > Asunto: Re: [XFree86] XFree86 on Sony VAIO Laptop > > > I'm not sure if NVIDIA's binary drivers support the GeForce > Go FX5600 > yet. I heard that they didn't. This chip is supported by the > the "nv" driver that comes with XFree86 4.3 though. RH9 includes > XFree86 4.3. It appears to me that 4.3 has some 1400x1050 modelines > built in too. Sometimes the 4.3 "nv" driver has a hard time > picking the output to use when flat panels are in involved and > you may need to play with the Option "CrtcNumber", but you should > be able to get it to work. CVS autodetects that much better. > You might consider just upgrading to the latest XFree86 CVS > development snapshot. > > > Mark. > > > On Thu, 13 Nov 2003, indra sarkar wrote: > > > Hi everyone, > > > > Can anyone help me please? > > > > i've set up my new PCG-GRT786M as a dualboot system with > redhat7.2. All > > is well apart from the Xfree86 server which refuses to start. > > > > i've installed the latest nvidia drivers (apparently > successfully) and > > hacked up my xfree86config file to pieces but all to no > avail (I hardly > > need add that I'm a bit new to all this) > > > > One of the problems is that the machine has a non-standard (for x > > anyway) display - a 16.1 TFT display panel (1400x1050) and nVidia > > GeForce Go FX5600 with 64MB. And Sony have refused to give > me the info i > > need to try and write my own entries for the Xfree86config > file saying > > that they don't support Linux. > > > > It did occur to me that I could try installing RH9 which > comes with a > > newer version of X11 which might have a 'smarter' version > of XConfig on > > it, but I don't really want to go thru all the traumas and > > newsgroup-overload of the last two weeks unless I'm sure. > > > > Any ideas v.gratefully accepted. > > > > Regards, > > > > Indra > > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] How to Submit a new driver to XFree86
> On Tue, Nov 18, 2003 at 01:24:04PM -0800, Terry Chang wrote: > > Hello, > > > > I'd like to add a new video driver to the future XFree86 > release, but > > couldn't find any information from the website for how to > submit it. I > > appreciate if someone can help me to obtain such information. > > Hi Terry, > > It's probably best to visit... > > http://bugs.xfree86.org > > and submit the new driver as an enhancement. Attach a tar.gz > or similar > via the attachment mechanism. > > Thanks for contributing. > > Alan. Just for curiosity, wich Driver ? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Please..Help me.. Slackware has me...
Did you run xf86config -Mensaje original-De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]En nombre de [EMAIL PROTECTED]Enviado el: jueves, 20 de noviembre de 2003 7:36Para: [EMAIL PROTECTED]Asunto: [XFree86] Please..Help me.. Slackware has me...I've instaled all cd, and i have seen gnome was also installed. I don't know how to start any graphic interface. Is there some special command? I've heard that startx run something, but what i don't know. So I type startx & hit enter. After that whas a blink screen, after was some bugs and wrote that No screen detected, I have Nvidia geforce 2 mx200. Should I install graphic driver to start something like gnome. Is there other command to run graphic interface?
[XFree86] Sis 315 3D support
Hi, excuse my brake english pls I want to buy a Sis 315 card, i seek in SuSE hardware database if they have support for this card, they says it has, but unknow for 3D support. Is there a way to now if a car o chip set have 3D support in Xfree ??? Thanks and regards Marcel MM
RE: [XFree86] Radeon 8500 Dual Monitor in SuSE 8.2 problems
1. YOU update 2. Did you run susuconfig ??? > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Joel Girard > Enviado el: jueves, 20 de noviembre de 2003 12:05 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] Radeon 8500 Dual Monitor in SuSE 8.2 problems > > > Suse 8.2 has XFree86 v4.3.0 and I downloaded the ATI Linux > drivers for XFree86 > v4.3.0 and it installs just fine. When I reboot I only get a > console and no > XWindows. Before the reboot I can even chose to have my > second monitor expand > my desktop, but obviously it doesn't work when I reboot. > > Any help would be appreciated. > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Bad TV out resolution - nvidia driver
Please excuse my bad english I only can see tv with a resolution of monitor 800x600 if i change my monitor resolution to 1280x1024, I see in the the tv a fragment ( 800x600 ) of a 1280x1024 total size. How i can have 1280x1024 in the monitor and 800x600 in the tv ??? Is there an example of a xf86config file that i can use ??? Here is my xf86config Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" EndSection Section "ServerFlags" #DontZap # disable (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable / (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer #Load "speedo" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "es" Option "XkbCompat" "" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "ButtonNumber" "5" Option "Name" "Autodetection" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" HorizSync 28-69 VertRefresh 50-120 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480"65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 EndSection Section "Device" Identifier "device1" VendorName "Nvidia" BoardName "GeForce2 MX/MX 400" Driver "nvidia" Option "TwinView" "1" Option "TwinViewOrientation" "Clone" Option "ConnectedMonitor" "CRT, TV" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1280x1024, [EMAIL PROTECTED];" Option "TVStandard" "PAL-B" Option "NvAGP" "3" Option "DigitalVibrance" "0" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSectio
RE: [XFree86] Multiple Monitor Problems
This is a Xfree86 forum not a Wilson forum You can send a letter to Bill gates if you have problems with Windows -Mensaje original-De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]En nombre de [EMAIL PROTECTED]Enviado el: viernes, 28 de noviembre de 2003 15:21Para: [EMAIL PROTECTED]Asunto: [XFree86] Multiple Monitor Problems Does the S3 VIRGE/GX PCI card have any conflicts running in Windows XP Pro? I can only get it to run one monitor.
[XFree86] Is going to be 3D support for S3 prosavage DDR in Xfree 4.4 ?
Please my crack english Considering the launch date for Xfree 4.4, I think the S3 Prosavage DDr driver ( with 3D support ) is not going to be include. Is this supposition correct ??? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] problem with Geforce 4 card...
Linux distribution ??? version ??? > -Mensaje original- > De: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] nombre de timex > Enviado el: jueves, 04 de diciembre de 2003 19:11 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] problem with Geforce 4 card... > > > Hi, I have a problem with XFree86. I can't make it work, all > the time it > shows me some bugs (log file attached). My Graphics Card is > nVidia Geforce 4 > Titanium 4200. I have orginal drivers from nVidia site, but I > can't compile Thats driver are binaries not source, you don´t need to compile it What is the exact error ?? > them. My kernel version is 2.4.22. Please help! > > Marcin S. > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Where i send monitor information ??
Hi, excuse my english pls I have a monitor that is not in xfree database. where, how and what should i send to help providing the need it information. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Where i send monitor information ??
I dont´t have problem with the monitor, i just would like to provide the monitor data to the xfree data base, so they can include it like a supported monitor. > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Marcel Mourguiart > Enviado el: miércoles, 10 de diciembre de 2003 16:10 > Para: XFree86 (E-mail) > Asunto: [XFree86] Where i send monitor information ?? > > > Hi, excuse my english pls > > I have a monitor that is not in xfree database. > > where, how and what should i send to help providing the need > it information. > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] SCO suppport ????
Hi, excuse my english Just for curiosity, what is this ??? 671. Updates for SCO support (Bugzilla #994, Kean Johnston).
RE: [XFree86] problem report
Here is a xfreeconfig file from tuxmobil.org/ ## # »» SaX generated XFree86 config file «« # Copyright (c) 2000 SuSE GmbH Nuernberg, All rights reserved. # # Version: 4.1 # Contact: Marcus Schaefer <[EMAIL PROTECTED]>, 2000 # # this file has been created from SaX version 4.1 # Please do not edit this file, changes may be lost the # next time using SaX # Section "Files" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin5/misc" FontPath "/usr/X11R6/lib/X11/fonts/latin5/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/latin5/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/latin5/Type1" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/xtest" ModulePath "/usr/X11R6/lib/modules" RgbPath"/usr/X11R6/lib/X11/rgb" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" EndSection Section "Module" Load "dbe" Load "type1" Load "speedo" Load "extmod" Load "freetype" EndSection Section "InputDevice" Driver "keyboard" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbKeyCodes" "xfree86" Option "XkbLayout" "de" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" Option "XkbVariant""nodeadkeys" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Device""/dev/psaux" Option "Emulate3Buttons" "on" Option "Name" "AutoDetected" Option "Protocol" "ps/2" Option "Vendor""AutoDetected" EndSection Section "Monitor" HorizSync 31-77 Identifier "Monitor[0]" ModelName "AutoDetected" VendorName "AutoDetected" VertRefresh50-77 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "640x480" 27.96 640 656 720 864 480 480 485 501 Modeline "800x600" 43.68 800 816 928 1072 600 600 606 626 Modeline "1024x768" 71.39 1024 1040 1216 1400 768 768 776 802 Modeline "1152x864" 90.48 1152 1168 1384 1568 864 864 873 902 Modeline "1280x960" 111.82 1280 1296 1552 1736 960 960 970 1003 Modeline "1280x1024" 119.28 1280 1296 1552 1736 1024 1024 1035 1070 Modeline "1600x1200" 160.16 1600 1616 1968 2208 1200 1200 1212 1253 Modeline "1600x1200" 167.23 1600 1616 1968 2208 1200 1200 1212 1253 EndSection Section "Screen" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1600x1200" "640x480" "800x600" "1024x768" "1152x864" "1280x960" "1280x1024" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor"Monitor[0]" EndSection Section "Device" BoardName "AutoDetected" Driver "r128" Identifier "Device[0]" VendorName "AutoDetected" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice"Keyboard[0]" "CoreKeyboard" InputDevice"Mouse[1]" "CorePointer" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Dimik 44 > Enviado el: lunes, 29 de diciembre de 2003 11:10 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] problem report > > > I have problem with video card or screen. My computer is IBM > Thinkpad A21p. > > XFree86.0.log file is attached. > > Thank you for help. > > _ > Protect your PC - get McAfee.com VirusScan Online > http://clinic.mcafee.co
RE: [XFree86] Re: Help: radeon 9700 question - need working config
Try with ATI drivers from ati home page > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Alex Deucher > Enviado el: lunes, 29 de diciembre de 2003 14:05 > Para: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Asunto: [XFree86] Re: Help: radeon 9700 question - need working config > > > you may a newer version of xfree86. I'm not familiar with what is > included with suse 9. An xfree86 log would be helpful. Also for help > related inquiries please use the [EMAIL PROTECTED] ML. > > Alex > > --- "William W. Austin" <[EMAIL PROTECTED]> wrote: > > Apologies in advance for this, but I've been pulling my hair out for > > hours on this one. > > > > My nephew (lives several hundred miles away) wanted to install linux > > on > > his formerly win-xp machine (athlon 2800 xp, 512 MB, 2 large drives, > > etc.) with Radeon 9700 Pro (128 MB) video card. He went out and > > bought > > Suse 9 and did a completely clean install (with me on the other end > > of > > the phone line the whole time - he's new to anything not from MS). > > Everything installed cleanly and the machine booted successfully, > > HOWEVER: > > > > The video card is not recognized. It is a Radeon 9700 Pro with 128 > > Mb > > of memory (AGP) and works correctly under the other OS, but although > > it > > shows up in scanpci and lspci, the setup utility on Suse bombs and > > cannot set up the card. He is also singularly unable to > run a simple > > command (rpm -q XFree86) to tell me the version on that > machine - and > > I > > haven't been able to get the info from any Suse website (and his net > > access is temporarily down until school starts again in January). > > > > I've spent nearly the entire day (11 hours) with him on the phone > > trying > > to find a solution but I nave other cards - no radeons - and my > > config > > files don't help here). XFre86 -configure fails, unable to find the > > device. If anyone has a working XF86Config file they can email me, > > I'd > > greatly appreciate it (as a last effort before I tell him > to turn off > > linux until I can go visit him in 3 weeks). I'm going out of town > > and > > he is nearly desparate to get X up and running on this machine. > > > > Please feel free to mail me privately if you can help. > > > > Thanks and apologies for wasting the bandwidth. > > > > Bill Austin > > > > > > -- > > William W. Austin [EMAIL PROTECTED] > > > [EMAIL PROTECTED] > >"Life is just a phase I'm going through..." > > ___ > > Devel mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/devel > > > __ > Do you Yahoo!? > New Yahoo! Photos - easier uploading and sharing. > http://photos.yahoo.com/ > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Problems with proSavage DDR
> -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Floca-Maxim Sergiu > Enviado el: viernes, 09 de enero de 2004 10:45 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] Problems with proSavage DDR > > > Hi there, > > I have installed Red Hat 7.2 and it seems that it doesn't > recognize my > videocard proSavage DDR P4M266. I have already downloaded and > tried several > drivers for "savage_drv.o" but no one is working. www.probo.com/timr/savage40.html > > So, please help me. I cannot start the X server and the error > message is the > following, taken /var/log/XFree86.0.log from : > > XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X > Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] > Build Host: stripples.devel.redhat.com > > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 8 > 21:53:12 2004 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "XFree86 Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "MultiSync 75" > (**) | |-->Device "S3 Savage (generic)" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "unix/:7100" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.4 > XFree86 XInput driver : 0.2 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x80008864, mode1Res1 = 0x8000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1106,3148 card 1106, rev 00 class > 06,00,00 hdr > 00 > (II) PCI: 00:01:0: chip 1106,b091 card , rev 00 class > 06,04,00 hdr > 01 > (II) PCI: 00:0b:0: chip 127a,1003 card 13df,1003 rev 01 class > 07,00,00 hdr > 00 > (II) PCI: 00:11:0: chip 1106,3074 card 1106, rev 00 class > 06,01,00 hdr > 80 > (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class > 01,01,8a hdr > 00 > (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class > 0c,03,00 hdr > 00 > (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class > 0c,03,00 hdr > 00 > (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class > 0c,03,00 hdr > 00 > (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 30 class > 04,01,00 hdr > 00 > (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 70 class > 02,00,00 hdr > 00 > (II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class > 03,00,00 hdr > 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.4 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 > (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x - 0x (0x1) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x - 0x (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x - 0x (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) > (II) Bus 1 I/O range: > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xdfd0 - 0xdfef (0x20) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0xcfb0 - 0xdfbf (0x1010) MX[B] > (II) Bus -1: bridge is at (0:
RE: [XFree86] Xfree86 error. Please Advise
I?n not a xfree people but: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is maybe if you upgrade to xfree 4.3 ? > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Patel, Rusil G > Enviado el: martes, 20 de enero de 2004 17:38 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] Xfree86 error. Please Advise > > > Below is the output of the log file XFree86.1.log. I tried to upgrade > to the latest version. That did not help either. > I have 10 rack mount computers hooked up thru a KVM. The X windows > environment will not start. Please Advise > > > XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window > System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 23 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: Linux 2.4.18-11smp i686 [ELF] > Build Host: daffy.perf.redhat.com > > Module Loader present > OS Kernel: Linux version 2.4.18-14smp > ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red > Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002 > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.1.log", Time: Tue Jan 20 > 09:42:06 2004 > (==) Using config file: "/etc/X11/XF86Config" > (==) ServerLayout "Anaconda Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "ATI Mach64 3D RAGE II" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard0" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc105" > (**) XKB: model: "pc105" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (**) FontPath set to "unix/:7100" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (++) using VT number 7 > > (WW) Open APM failed (/dev/apm_bios) (No such device) > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x8000180c, mode1Res1 = 0x8000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1166,0009 card , rev 06 class 06,00,00 > hdr 80 > (II) PCI: 00:00:1: chip 1166,0009 card , rev 06 class 06,00,00 > hdr 80 > (II) PCI: 00:02:0: chip 1002,4756 card 8086,4756 rev 7a class 03,00,00 > hdr 00 > (II) PCI: 00:03:0: chip 8086,1229 card 8086,1229 rev 08 class 02,00,00 > hdr 00 > (II) PCI: 00:06:0: chip 1011,0024 card , rev 03 class 06,04,00 > hdr 01 > (II) PCI: 00:0f:0: chip 1166,0200 card 1166,0200 rev 50 class 06,01,00 > hdr 80 > (II) PCI: 00:0f:1: chip 1166,0211 card , rev 00 class 01,01,8e > hdr 80 > (II) PCI: 01:08:0: chip 10de,0110 card , rev b2 class 03,00,00 > hdr 00 > (II) PCI: 02:04:0: chip 9005,00cf card 8086,00cf rev 01 class 01,00,00 > hdr 80 > (II) PCI: 02:04:1: chip 9005,00cf card 8086,00cf rev 01 class 01,00,00 > hdr 80 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 > (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x - 0x (0x1) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x - 0x (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0]
RE: [XFree86] Support for NVIDIA GeForce4 MX / Quadro4
All the nvidia cards are supported by nvidia in linux they have drivers for 3D. GeForce 4 MX are supported by Xfree directly but not with 3D acceleration. Quadro 2 i?m very sure is supported too. p.d. Pls excuse my bad english. Marcel MM > -Mensaje original- > De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > nombre de Dr. Andreas Schenk > Enviado el: miercoles, 21 de enero de 2004 19:26 > Para: [EMAIL PROTECTED] > Asunto: [XFree86] Support for NVIDIA GeForce4 MX / Quadro4 > > > Hi, > > according to the xfree86 home-page, the following is supported by the > nv-driver in release 4.3.0: ... GeForce (DDR, 256), Quadro, GeForce2 > (GTS, Ultra, MX), GeForce3, and Quadro2. > > GeForce4 MX and Quadro4 are missing. Will they be supported > in the near > future or do have to buy one of the other cards? > > Thanks in advance, > > Andreas Schenk > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Whats happening with S3 prosavage DDR 3D support
Hi, first pls excuse my bad english Finally is going to be support for 3D aceleration in xfree 4.4 ??? I tried to see the cvs change log with no luck to understand whats was there. Is there some place where i can see this information ?? Is there a way a can help ?? Thanks and regards Marcel MM ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] S3 prosavage DDR driver for Xfree 4.3 ???
Hi, i`m new here and i`m new in linux ... ( and i`m spanish native not english ) My probles is very simple i have a S3 prosavage ddr video but the Xfree driver is not good ... so i download one from probo page but i have to put the no bios option and i don`t have 3D acceleration ... but i heart ( or hear ) there is a new driver but only for the Xfree4.2 ... i already tried to patch this version and installed in my compurer ( i`m using Suse 8.2 with Xfree 4.3 ) but nothing go well and i had to reintall suse again ... so Some body no were i get a working driver for xfree 4.3 with 3D accelaration pls your help with anything .. plss MMM ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] No Xserver
I had a similar problem ... if your monitor turn black the is posible that the problen is in your video driver ( for geforce4) maybe you should try to download the driver and the kernel for nvidia video driver and then try again El vie, 15 de 08 de 2003 a las 17:34, Bram Klievink escribió: > Please, first of all, excuse me in advance for my English (I'm Dutch) > Next, there seems to be a problem with my configuration when trying to run > the X window system. > I tried a lot of things, including different distributions and newer nvidia > drivers. > Here's the problem: > after I configure the xserver (manualy or automatically with Sax2, using > Suse 8.2) the server tries to start. Then the screen turns black and > nothing seems to happen. > If I switch back to a shell (ctrl+alt+f1 for example), I see a flash of > what I am expecting to see: KDE. > I tried lots of things, I think the problem is a combination: I'm using an > 18.1" TFT monitor (by Samsung), connected DVI to a Geforce4Ti4200. But the > Suse website declares this monitor as compatibel and everything should work > fine. I updated almost every piece of software on my system, but I cannot > use KDE. > Maybe someone knows this problem and can tell me how to fix it. > Thanks in advance, > > Bram > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Query
Hi, Excuse my english i'm spanish speaker. With your second problem the netvista, i don't now if you now this but that netvista is certificated for linux, you just have to call to the call center and they HAVE to help you if it is some problem there, you can review the IBM home page for more information. If they don't help you incist !! i worked there that why i'm tell you this, All the IBM computers are certificared for linux,and red hat specific. atte. Marcel MM El sáb, 30 de 08 de 2003 a las 04:00, Arpit Bansal escribió: > Sir/Madam > > I have a couple of problems regarding my computer systems. > > Problem 1: > > I have a query regarding my computer system. I have a Pentium-I > class computer the description of which is: > 1. Pentium-I (S) @ 100 MHz CPU > 2. Intel i430-VX Chipset original motherboard from Intel > > i430-VX-AI5V-90/100/133/150/175/200 05-04-1996 > > The largest harddisk supported by my motherboard is 8.4 GB. My > BIOS version is 1.0 01 > > Is it possible that by some means (for eg. upgrading my BIOS) that > my motherboard can recognize a bigger harddisk. > > ** > > Problem 2: > > I have a IBM Netvista 6824-42A computer with Intel 845 Chipset. I > failed to get x-working with Linux Red hat 8.0. I upgraded to > Linux 9.0 and got the x . But i have still not able to get the > desired resolution/display which at present is set at 800*600. i > am trying by going to settings>display>resolution no luck. > > I shall be highly grateful for an early solution for the same. > > Thanking you > > Arpit Bansal > > ABansal > ___ > Meet your old school or college friends from > 1 Million + database... > Click here to reunite www.batchmates.com/rediff.asp > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] 3D support for S3 prosavage DDR driver ????
Hi, ( excuse my english pls) I have a S3 prosavage DDR, with no 3D acceleration by now, my question is: In the new vertion of xfree (4.4 i think ) is going to be 3D support for this card ??? Is going to be 3D support for 4.3 ??? I had see some fixed in the driver from cvs snapshot but i`m not sure if thats mean that the new driver with 3D support is ready. Thanks and regards Marcel Mourguiart M ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 7000
Tienes que atachar el archivo: /var/log/XFree86.0.log ahi estan todos los errores en todo caso tambien sirve mensionar que tarjeta grafica usas y que monitor. Atte. Marcel MM El dom, 14 de 09 de 2003 a las 20:20, Esteban escribió: > Tengo una radeon 7000 pruebo diferentes > configuraciones sin que se vea nada.Tengo > la ultima version de mandrake 9.2.Ayuda > por favor. > >Gracias > > > > I have a radeon 7000 and the last version of > mandrake 9.2.I don´t see x only text mode. Please > help me. > > > > > mailto:[EMAIL PROTECTED] > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] on a ProSavage8 card
Excuse my english El jue, 04-12-2003 a las 07:14, Pablo Rodriguez escribió: > Hi there, > > I bought an Acer Aspire 1353LM a month ago and I have installed MDK 9.1. > The graphic card is a S3ProSavage8 8×AGP. MDK uses the vesa driver for > it, that works fine, excepting some flickering when watching dvds with > mplayer (or any dvd player). > > I wanted to install the proper driver (the one from Tim Roberts), but it > didn't work. Tim told me that the chipset is actually a CastleRock one > and that the 4.4 version of the XFree86 will support it. Is there no way > to have a driver for the 4.3 version? (I have been using Linux for less > than a month and upgrading XFree86 won't be an easy task.) There is a driver provided by VIA for that card but just for Xfree4.2, now Xfree people is working on it to updated to Xfree 4.4, but the work is not ready there is no cvs driver yet. > > Many thanks for your excellent work, > > > Pablo > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problems with TV out resolution nvidia
Please excuse my bad english I can see fine the tv, but only with a resolution of 800x600 if i change my configuration to 1280x1024, I see in the the tv a fragment ( 800x600 ) of a 1280x1024 total size. How i can have 1280x1024 in the monitor and 800x600 in the tv ??? Here is my xf86config Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" EndSection Section "ServerFlags" #DontZap # disable (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable / (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer #Load "speedo" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "es" Option "XkbCompat" "" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "ButtonNumber" "5" Option "Name" "Autodetection" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" HorizSync 28-69 VertRefresh 50-120 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480"65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 EndSection Section "Device" Identifier "device1" VendorName "Nvidia" BoardName "GeForce2 MX/MX 400" Driver "nvidia" Option "TwinView" "1" Option "TwinViewOrientation" "Clone" Option "ConnectedMonitor" "CRT, TV" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1280x1024, [EMAIL PROTECTED];" Option "TVStandard" "PAL-B" Option "NvAGP" "3" Option "DigitalVibrance" "0" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSection ___ XFree8
Re: [XFree86] mandarme driver s3 virge/gx2
Antonio esta es una lista de Xfree86 que es el motor grafico de linux y otros sistemas operativos, no tiene nada que ver con windows. Pero te recomiendo que te des una vuelta por la pagina de VIA por que ellos son los dueños de S3 El dom, 28-12-2003 a las 00:55, antonio david escribió: > por favor necesito que alguien me mande el controlador de la tarjeta > grafica s3 virge/gx2 o bien me faciliten informacion de donde puedo > encontrarlo y como descargarlo mi sistema operativo es windows > millenium edition estare eternamente agradecido pues llevo varios dias > buscandolo sin exito ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] xfree disband ??????
Is this a joke ??? [30 December 2003] The XFree86 core team has voted to disband itself, effective 31 December 2003. Comments about this can be made on Forum at XFree86 dot org ; registration is not necessary. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] xfree disband ??????
El mié, 31-12-2003 a las 16:28, David Dawes escribió: > On Wed, Dec 31, 2003 at 03:58:19PM -0300, Marcel Mourguiart Montt wrote: > >Is this a joke ??? > > > >[30 December 2003] > >The XFree86 core team has voted to disband itself, effective 31 December > >2003. Comments about this can be made on Forum at XFree86 dot org ; > >registration is not necessary. > > It is not a joke. The XFree86 core team disbanded itself, not the > project. XFree86 remains very much alive, and I expect that the > active members of that old team will remain active. I know I will :-) > The announcement I posted to the devel list last night can be viewed > at: > > http://www.mail-archive.com/[EMAIL PROTECTED]/msg04639.html > > David Thanks you convert a very bad news in a good one :-) p.d. pls excuse my bad english Marcel ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
