Re: [XFree86] ATI FireGL / IBM RC1000 / GT1000 PCI

2003-02-02 Thread sgx
But, is the FireGL based on a radeon, or somewhat compatible chipset.. or
will it need totally new drivers writing from scratch..
Will the fact that closed source drivers are available from ATI impede
efforts by the xfree team to write an opensource driver, even tho only a
single architecture is supported.. especially considering these cards are
shipped primarily for use in HP PA-RISC workstations.

On Sun, 2 Feb 2003, Stefan Dirsch wrote:

> Date: Sun, 2 Feb 2003 15:28:26 +0100
> From: Stefan Dirsch <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [XFree86] ATI FireGL / IBM RC1000 / GT1000 PCI
>
> On Sun, Feb 02, 2003 at 01:44:15PM +, [EMAIL PROTECTED] wrote:
> > But the driver on the ATI website is x86 only, as i said in the previous
> > mail i`m attempting to use this in an alpha-based machine, since none of
> > the x86 machines available to me have 64bit pci, and moreso they all have
> > components immediately beyond the 32bit slots that prevent a 64bit card
> > from fitting.
>
> There is no FireGL2 driver for Alpha available and it is very unlikely
> that this will ever happen. Try to use vga or vesa driver. AFAIK the
> board isn't even fbdev compatible. I'm not sure if vesa or fbdev makes
> sense at all on Alpha.
>
> Best regards,
> Stefan
>
> Public Key available
> 
> Stefan Dirsch (Res. & Dev.)   SuSE Linux AG
> Tel: 0911-740530  Deutschherrnstr. 15-19
> FAX: +49 911 741 77 55D-90429 Nuernberg
> http://www.suse.deGermany
> 
> ___
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86



Re: [XFree86] ATI FireGL / IBM RC1000 / GT1000 PCI

2003-02-02 Thread sgx
But the driver on the ATI website is x86 only, as i said in the previous
mail i`m attempting to use this in an alpha-based machine, since none of
the x86 machines available to me have 64bit pci, and moreso they all have
components immediately beyond the 32bit slots that prevent a 64bit card
from fitting.

On Sun, 2 Feb 2003, Stefan Dirsch wrote:

> Date: Sun, 2 Feb 2003 11:55:36 +0100
> From: Stefan Dirsch <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: Re: [XFree86] ATI FireGL / IBM RC1000 / GT1000 PCI
>
> On Sun, Feb 02, 2003 at 02:41:33AM +, [EMAIL PROTECTED] wrote:
> > Is there, or will there, be any support for the above card... also
> > marketted as FireGL 2 PRO PCI or HP GL-UX.. Linux detects it as:
>
> Driver with 2D/3D support is on ATI website ...
>
>   http://mirror.ati.com/products/workstation/firegl2/index.html
>
> Best regards,
> Stefan
>
> Public Key available
> 
> Stefan Dirsch (Res. & Dev.)   SuSE Linux AG
> Tel: 0911-740530  Deutschherrnstr. 15-19
> FAX: +49 911 741 77 55D-90429 Nuernberg
> http://www.suse.deGermany
> 
> ___
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86



[XFree86] ATI FireGL / IBM RC1000 / GT1000 PCI

2003-02-01 Thread sgx
Hi,

Is there, or will there, be any support for the above card... also
marketted as FireGL 2 PRO PCI or HP GL-UX.. Linux detects it as:

  Bus  0, device  11, function  0:
VGA compatible controller: PCI device 1014:0170 (IBM) (rev 2).
  IRQ 28.
  Master Capable.  Latency=32.  Min Gnt=255.Max Lat=255.
  Non-prefetchable 32 bit memory at 0xa58 [0xa59].
  Non-prefetchable 32 bit memory at 0xc00 [0xfff].

It is aparrently manufactured by ATI, uses an IBM chipset.. and is
supplied on a 64bit pci card, a picture (890kb) is available at
http://www.ev6.net/card.jpg
I hear conflicting things, some people tell me this card is Radeon
based/compatible, but the current CVS XF86 doesnt detect it as such, would
it work if it recognised the PCI ID as a radeon card? or is it just not
compatible atall?
The ATI-supplied binary drivers should aparrently support this card, but
the only machine i have which will take this card atall is an Alpha, and
thus wont run the x86 binaries supplied by ATI.

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86