[XFree86] problem with x server
I am using the Xfree86 version 4.3 with knoppix to install mythtv (knoppmyth). I am having trouble with using my nVidia Geforce 4000 mx pci card. Assuming that is the hangup can anyone help me fix this? specs Intel 2.0 ghz onboard s3 savage 32 mb video memory 512 mb ram anymore specs needed I will give any that I know how to get thanks in advance Joel Blair open source newbie
Re: [XFree86] Problem with X server
On Mon, Mar 29, 2004 at 08:32:05AM +0530, [EMAIL PROTECTED] wrote: Dear Sir/Madam, After a normal shut down, when I tried to start my computer, I got an Xserver error am unable to start X windows. The log file is attached The log-file shows that you are missing 2 important drivers. Check for /usr/X11R6/lib/modules/drivers/i810_drv.o and /usr/X11R6/lib/modules/exrensions/libxie.a The pex5 can be safely left as is, or removed from FontPath in the XFConfig-4 file. - arvind. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problem with X server
Dear Sir/Madam, I have Redhat Linux 9.0 working on a P-3. After a normal shut down, when I tried to start my computer, I got an Xserver error am unable to start X windows. The log file is attached Please suggest what can be done. Hoping to hear from you, Priya Hasan XFree86.0.log Description: Binary data
Re: [XFree86] Problem with X server
On Mon, Mar 29, 2004 at 08:32:05AM +0530, [EMAIL PROTECTED] wrote: After a normal shut down, when I tried to start my computer, I got an Xserver error am unable to start X windows. The log file is attached Please suggest what can be done. It appears that X was not installed correctly on your machine. Several modules needed by your system are not found (see logfile). I suggest reinstalling the X RPMs on your system. Regards, Pieter Hulshoff ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problem with X server
Dear Linux community , We need the G450 Matrox Video drivers for Linux Mandrake 7.0 and the instructions to install it on my current hardware platform with supermicro motherboard . Regards Nestor Roldan Head Lab Technologist Computalog S.A Argentina - Santa Cruz PH:+542974850019 FX:+542974850020 [EMAIL PROTECTED] Nestor Roldan Head Lab Technologist Computalog S.A Argentina - Santa Cruz PH:+542974850019 FX:+542974850020 [EMAIL PROTECTED] - Original Message - From: Mark Vojkovich [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, February 08, 2004 5:35 PM Subject: Re: [XFree86] Problem with X server It looks like you are missing alot of modules. eg: /usr/X11R6/lib/modules/drivers/i810_drv.a /usr/X11R6/lib/modules/input/mouse_drv.a /usr/X11R6/lib/modules/extensions/libexmod.a etc... Perhaps you have an incomplete XFree86 installation? Mark. On Sun, 8 Feb 2004, Mr Aurengzeb Malik wrote: Hi, I have pasted the contents of the log file below. Please help The Log File contains --- XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jun 19 10:47:04 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 414c,4730 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:07:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe400 - 0xe40f (0x10) MX[B] (II) PCI
[XFree86] Problem with X server
Hi, I have pasted the contents of the log file below. Please help The Log File contains ---XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2)Release Date: 27 February 2003X Protocol Version 11, Revision 0, Release 6.6Build Operating System: Linux 2.4.20-3bigmem i686 [ELF]Build Date: 27 February 2003Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version.Module Loader presentOS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gccversion 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST2003Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown.(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jun 19 10:47:04 2003(==) Using config file: "/etc/X11/XF86Config"(==) ServerLayout "Default Layout"(**) |--Screen "Screen0" (0)(**) | |--Monitor "Monitor0"(**) | |--Device "Videocard0"(**) |--Input Device "Mouse0"(**) |--Input Device "Keyboard0"(**) Option "XkbRules" "xfree86"(**) XKB: rules: "xfree86"(**) Option "XkbModel" "pc105"(**) XKB: model: "pc105"(**) Option "XkbLayout" "us"(**) XKB: layout: "us"(==) Keyboard: CustomKeycode disabled(**) |--Input Device "DevInputMice"(**) FontPath set to "unix/:7100"(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"(==) ModulePath set to "/usr/X11R6/lib/modules"(++) using VT number 7(II) Open APM successful(II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4(II) Loader running on linux(II) LoadModule: "bitmap"(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a(II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4(II) Loading font Bitmap(II) LoadModule: "pcidata"(II) Loading /usr/X11R6/lib/modules/libpcidata.a(II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6(II) PCI: Probing config type using method 1(II) PCI: Config type is 1(II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000(II) PCI: PCI scan (all values are in hex)(II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr00(II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr00(II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr01(II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr80(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr00(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr00(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr00(II) PCI: 00:1f:5: chip 8086,2415 card 414c,4730 rev 02 class 04,01,00 hdr00(II) PCI: 01:07:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr00(II) PCI: End of PCI scan(II) Host-to-PCI bridge:(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)(II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B](II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B](II) PCI-to-PCI bridge:(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN iscleared)(II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B](II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe400 - 0xe40f (0x10) MX[B](II) PCI-to-ISA bridge:(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)(--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset GraphicsController] rev 3, Mem @ 0xe000/26, 0xe410/19(II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B](II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B](II) Active PCI resource ranges: [0] -1 0 0xe400 - 0xe4ff (0x100) MX[B] [1] -1 0 0xe410 - 0xe417 (0x8) MX[B](B) [2] -1 0 0xe000 - 0xe3ff (0x400) MX[B](B) [3] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [4] -1 0 0xdc00 - 0xdc3f (0x40) IX[B] [5] -1 0 0xd800 - 0xd8ff (0x100) IX[B] [6] -1 0 0x5000 - 0x500f (0x10) IX[B] [7] -1 0 0xd000 - 0xd01f (0x20) IX[B] [8] -1 0 0xf000 - 0xf00f (0x10)
Re: [XFree86] Problem with X server
It looks like you are missing alot of modules. eg: /usr/X11R6/lib/modules/drivers/i810_drv.a /usr/X11R6/lib/modules/input/mouse_drv.a /usr/X11R6/lib/modules/extensions/libexmod.a etc... Perhaps you have an incomplete XFree86 installation? Mark. On Sun, 8 Feb 2004, Mr Aurengzeb Malik wrote: Hi, I have pasted the contents of the log file below. Please help The Log File contains --- XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jun 19 10:47:04 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us (**) XKB: layout: us (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8050, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7124 card 8086,7124 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2415 card 414c,4730 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:07:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xc000 - 0xc0ff (0x100) IX[B] [1] -1 0 0xc400 - 0xc4ff (0x100) IX[B] [2] -1 0 0xc800 - 0xc8ff (0x100) IX[B] [3] -1 0 0xcc00 - 0xccff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe400 - 0xe40f (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xe000/26, 0xe410/19 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff
[XFree86] problem with x server
Hello ! I'm using RH Linux 9.0 have got problem with Xwindow When I give startx command I get the message attached herewith. Thanks in advance. Mahesh __ Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! http://webhosting.yahoo.com/ps/sb/ XFree86.0.log Description: XFree86.0.log
[XFree86] Problem Killing X Server
Sir, I 've recently installed linux kernel 2.6.0 and all things X related seem to be functioning fine, except for switching terminals and shutting down...when i try to kill x, or switch a terminal(ctrl-alt-F1-6) or restarting, all i get is a blank screen. i know my keyboard is working cause ctrl-alt F7 switched back to the active X terminal. i had no problems with kernel 2.4.22 anyway here are the required log files: The log file XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.22 i686 [ELF] Build Date: 16 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sun Jan 11 15:57:22 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Simple Layout (**) |--Screen Screen 1 (0) (**) | |--Monitor My Monitor (**) | |--Device VESA Framebuffer (**) |--Input Device Mouse1 (**) |--Input Device Keyboard1 (==) Keyboard: CustomKeycode disabled (**) FontPath set to /usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/ (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3099 card 1043,8064 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b099 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:05:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0f:0: chip 3388,0021 card , rev 13 class 06,04,00 hdr 01 (II) PCI: 00:11:0: chip 1106,3147 card 1043,8052 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1043,8052 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 23 class 0c,03,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0250 card 1043,800b rev a3 class 03,00,00 hdr 00 (II) PCI: 02:08:0: chip 1033,0035 card 9004,0235 rev 41 class 0c,03,10 hdr 80 (II) PCI: 02:08:1: chip 1033,0035 card 9004,0235 rev 41 class 0c,03,10 hdr 00 (II) PCI: 02:08:2: chip 1033,00e0 card 9004,02e0 rev 02 class 0c,03,20 hdr 00 (II) PCI: 02:0b:0: chip 104c,8020 card 104c,8010 rev 00 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe600 - 0xe76f (0x170) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe770 - 0xefff (0x890) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:15:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xe380 - 0xe5ff (0x280) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) nVidia Corporation NV25 [GeForce4 Ti 4600] rev 163, Mem @ 0xe600/24, 0xe800/27, 0xe780/19, BIOS @ 0xe77e/17 (II) Addressable bus resource
[XFree86] problem with X server under redhat 8.0
i am using redhat 8.0(kernel version 2.4.18-27.8.0debug) built under i686 architecture.i have recently installed XFree86 4.3.0 on my system after which the X server isunable to start.the gcc version present on my redhat is 3.2.dripkg-1.0-4.i386.rpm is installed on my linux.the error message that popups when i run 'startx' is as follows: (EE) VGA(0):Virtual height(0) is too small for the hardware(min 1) (EE) Screen(s) found,but none have a usable configuration XIO:Fatal IO error 104 (connection reset by peer) on X server ":0.0" after 0 requests(0 known processed) with 0 events remaining. i am enclosing my XFree86 configuration file,please help me out. my Xfree86 configuration file shows: # File generated by xf86config. ## Copyright (c) 1999 by The XFree86 Project, Inc.## Permission is hereby granted, free of charge, to any person obtaining a# copy of this software and associated documentation files (the "Software"),# to deal in the Software without restriction, including without limitation# the rights to use, copy, modify, merge, publish, distribute, sublicense,# and/or sell copies of the Software, and to permit persons to whom the# Software is furnished to do so, subject to the following conditions:# # The above copyright notice and this permission notice shall be included in# all copies or substantial portions of the Software.# # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE# SOFTWARE.# # Except as contained in this notice, the name of the XFree86 Project shall# not be used in advertising or otherwise to promote the sale, use or other# dealings in this Software without prior written authorization from the# XFree86 Project.# # **# Refer to the XF86Config(4/5) man page for details about the format of # this file.# ** # **# Module section -- this section is used to specify# which dynamically loadable modules to load.# **#Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables# initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "speedo"# Load "freetype"# Load "xtt" # This loads the GLX module# Load "glx"# This loads the DRI module Load "dri" EndSection # **# Files section. This allows default font and rgb paths to be set# ** Section "Files" # The location of the RGB database. Note, this is the name of the# file minus the extension (like ".txt" or ".db"). There is normally# no need to change the default. RgbPath"/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together),# as well as specifying multiple comma-separated entries in one FontPath# command (or a combination of both methods)# # If you don't have a floating point coprocessor and emacs, Mosaic or other# programs take long to start up, try moving the Type1 and Speedo directory# to the end of this list (or comment them out).# FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/"# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"# FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # **# Server flags section.# ** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may# provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the CrtlAltFn VT switch sequence# (where n is 1 through 12). This allows clients to receive these key# events. # Option
Re: [XFree86] problem with X server under redhat 8.0
On Sat, 6 Sep 2003, [iso-8859-1] bharat tumuluru wrote: i am using redhat 8.0(kernel version 2.4.18-27.8.0debug) built under i686 architecture.i have recently installed XFree86 4.3.0 on my system after which the X server is unable to start.the gcc version present on my redhat is 3.2.dripkg-1.0-4.i386.rpm is installed on my linux.the error message that popups when i run 'startx' is as follows: You are using the wrong driver. Change Driver vga to Driver i810 Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problem starting X server with Timesys kernel
Sorry for the mails before, I missed the subject I have installed Red Hat 8.0 and Timesys 3.1. I don't have any problem starting Red Hat' kernel, but I cannot start the X Window System when starting with Timesys. When I get to the graphic login I log in with gnome and it crashes saying this: There already appears to be an X server running on display :0. Should I try another display number? If you answer no, I will attemp to start the server on 0: again. (You can change consoles by pressing Ctrl-Alt plus a function key, such as Ctrl-Alt-F7 to go to console 7. X servers usually run on consoles 7 or higher). Then whatever you choose it returns to the graphic login. It seems there isn't any other X server running when you switch to the other consoles. I am using XFree86 version 4.2.0 Thank you in advance. My log is: XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-11smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present OS Kernel: Linux version 2.4.7-timesys-3.1.214 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 Wed Mar 13 01:25:10 EST 2002 PF Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Sat Jul 19 12:49:58 2003 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Anaconda Configured (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device S3 Trio3D (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc102 (**) XKB: model: pc102 (**) Option XkbLayout es (**) XKB: layout: es (==) Keyboard: CustomKeycode disabled (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 8 (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0691 card , rev 42 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0596 card 1106, rev 12 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card , rev 06 class 01,01,8a hdr 00 (II) PCI: 00:07:3: chip 1106,3050 card , rev 20 class 06,00,00 hdr 00 (II) PCI: 00:12:0: chip 10ec,8139 card 1259,2503 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8904 card 5333,8904 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Host-to-PCI bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x - 0x (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xd800 - 0xdfff (0x800) MX[B] (II) Bus 1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (II) Bus -1: bridge is at (0:7:3), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0x -
Re: [XFree86] Problem with X server!
Paul, he needs X 4.3... Lionel --- Paul [EMAIL PROTECTED] wrote: I agree that it might be better to just use a later distribution of Red Hat. But if you have limited resources and want to try a few things, there is a tool called xf86config that you run from the command line that will ask you for information to create a new XF86Config file. This is what appears to be your problem. If you don't know what that is, try the manual pages, man XF86Config. You will need some information from your monitor and video card. You need at least the horizontal and vertical frequencies of the monitor and the type and memory size of your video card. You should have a good idea of what resolution you want. A good guess would be 1024x768 at 24 bit color. You might want to post what kind of card and monitor you have. On Sat, 2003-04-05 at 07:03, Lionel Lecoq wrote: RH 7.1 is a bit old for new hardware, I suspect your graphic card is not recognised I would try RH 8.0 (or 9 I believe it is already out) or some other newer version of another provider. A lot of the newer cards are only recognised well by X 4.3... Lionel --- Gaasha! [EMAIL PROTECTED] wrote: Hi! I have installed Redhat Linux ver 7.1 on my new P4 computer (earlier I had it on my P3 and it was working fine). But when i installed Linux on this P4, it didn't recognize X server during installation. So I had to quit without X installed. When I logged on to the system through console, and ran the command startx it gave error and didn't start X server. I am attaching the output log file that it saved in the /var/log/ folder, namely XFree86.0.log. Please, help me configure the X server, I can't work on linux console alone. Thanking you in anticipation, Gaasha. - Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more ATTACHMENT part 2 application/octet-stream name=XFree86.0.log __ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 __ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problem with X server!
Hi! I have installed Redhat Linux ver 7.1 on my new P4 computer (earlier I had it on my P3 and it was working fine). But when i installed Linux on this P4, it didn't recognize X server during installation. So I had to quit without X installed. When I logged on to the system through console, and ran the command "startx" it gave error and didn't start X server. I am attaching the output log file that it saved in the /var/log/ folder, namely XFree86.0.log. Please, help me configure the X server, I can't work on linux console alone.Thanking you in anticipation,Gaasha.Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more XFree86.0.log Description: XFree86.0.log
Re: [XFree86] Problem with X server!
RH 7.1 is a bit old for new hardware, I suspect your graphic card is not recognised I would try RH 8.0 (or 9 I believe it is already out) or some other newer version of another provider. A lot of the newer cards are only recognised well by X 4.3... Lionel --- Gaasha! [EMAIL PROTECTED] wrote: Hi! I have installed Redhat Linux ver 7.1 on my new P4 computer (earlier I had it on my P3 and it was working fine). But when i installed Linux on this P4, it didn't recognize X server during installation. So I had to quit without X installed. When I logged on to the system through console, and ran the command startx it gave error and didn't start X server. I am attaching the output log file that it saved in the /var/log/ folder, namely XFree86.0.log. Please, help me configure the X server, I can't work on linux console alone. Thanking you in anticipation, Gaasha. - Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more ATTACHMENT part 2 application/octet-stream name=XFree86.0.log __ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem with X server!
I agree that it might be better to just use a later distribution of Red Hat. But if you have limited resources and want to try a few things, there is a tool called xf86config that you run from the command line that will ask you for information to create a new XF86Config file. This is what appears to be your problem. If you don't know what that is, try the manual pages, man XF86Config. You will need some information from your monitor and video card. You need at least the horizontal and vertical frequencies of the monitor and the type and memory size of your video card. You should have a good idea of what resolution you want. A good guess would be 1024x768 at 24 bit color. You might want to post what kind of card and monitor you have. On Sat, 2003-04-05 at 07:03, Lionel Lecoq wrote: RH 7.1 is a bit old for new hardware, I suspect your graphic card is not recognised I would try RH 8.0 (or 9 I believe it is already out) or some other newer version of another provider. A lot of the newer cards are only recognised well by X 4.3... Lionel --- Gaasha! [EMAIL PROTECTED] wrote: Hi! I have installed Redhat Linux ver 7.1 on my new P4 computer (earlier I had it on my P3 and it was working fine). But when i installed Linux on this P4, it didn't recognize X server during installation. So I had to quit without X installed. When I logged on to the system through console, and ran the command startx it gave error and didn't start X server. I am attaching the output log file that it saved in the /var/log/ folder, namely XFree86.0.log. Please, help me configure the X server, I can't work on linux console alone. Thanking you in anticipation, Gaasha. - Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more ATTACHMENT part 2 application/octet-stream name=XFree86.0.log __ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem with X server!
That looks like the new Intel integrated graphics? You're probably going to need to install the newest XFree86 (version 4.3) to get that to work. Mark. On Sat, 5 Apr 2003, Gaasha! wrote: Hi! I have installed Redhat Linux ver 7.1 on my new P4 computer (earlier I had it on my P3 and it was working fine). But when i installed Linux on this P4, it didn't recognize X server during installation. So I had to quit without X installed. When I logged on to the system through console, and ran the command startx it gave error and didn't start X server. I am attaching the output log file that it saved in the /var/log/ folder, namely XFree86.0.log. Please, help me configure the X server, I can't work on linux console alone. Thanking you in anticipation, Gaasha. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] problem starting x server
_XSERVTransSocketINETCreateListener: ...SocketCreateListner () failed _XSERVTransMakeALLCOTSServerListeners: server already running Fatat server erroe Server Cannot establish any listening sockets - Make sure an X server isn't already running.. David Ajilore Network Services Engineer GX Networks UK Ltd. Direct: +44 (0) 208 957 1246 Mobile: +44 (0) 7866 563 100 Fax: +44 (0) [EMAIL PROTECTED] www.gxn.net
Re: [XFree86] problem starting x server
It says you already have a server running. Do you disagree? Mark. On Wed, 19 Mar 2003, David Ajilore wrote: _XSERVTransSocketINETCreateListener: ...SocketCreateListner () failed _XSERVTransMakeALLCOTSServerListeners: server already running Fatat server erroe Server Cannot establish any listening sockets - Make sure an X server isn't already running.. David Ajilore Network Services Engineer GX Networks UK Ltd. Direct: +44 (0) 208 957 1246 Mobile: +44 (0) 7866 563 100 Fax: +44 (0) [EMAIL PROTECTED] www.gxn.net ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] problem regarding X server system.
Dear Sir, I am using a Red Hat 8.0 as server and accessing files from it using telnet from a remote machine which runs Windows 2000 Professional. The problem is that when I try starting the X Windows Server (after I have logged in the server by telnet as a user/root) the X windows won't start giving the following error: Fatal Server Error: PAM authentication failed, cannot start X server. Perhaps you donot have console ownership? This was the only error message given. I would be obliged if you could help me. Thanking You, Yours truly, Vikhyat Srivastava VIKHYAT SRIVASTAVA, C-18, I.I.P.S. Hostel, Khandwa Road, Ring Road, Indore, M.P., India-452017. Ph.:0731-361727. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86