[xmail] Re: Xmail stop after sending mai with attachment to multiple recipients
Gideon So schreef: >>It is a bit strange to me that when the filter fails or hangs for >>whatever reason that Xmail then stops. Maybe Davide can say something >>about that > > It's also strange and quite annoying to me also. Seems that the > filter runs fine but XMail just stops at this situation. Hope that > Davide can give me some clues. > One thing that is not correct is that if you see clamscan still running the filter is also running and that is strange. For the filter it doesn't matter if it is a mail to 1 address or to 100 addresses. The filter just gets the attachments to scan. Are those large attachments when it goes wrong? Perhaps scanning takes too long and then the problem occurs? Can you try with another AV scanner to see if it makes any difference on your system? -- Groeten, Peter Was that your directory? - - Heb je een Dreambox 7000S ? - Kijk eens op http://www.dreamvcr.com - Kijk ook op http://www.lindeman.org - ICQ 22383596 - Uptime lindeman.org - 2 days, 10 hours and 8 minutes, 0 users logged in. - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Xmail stop after sending mai with attachment to multiple recipients
Gideon So schreef: >>You can sometime see this message in debug mode but this is not a problem. >>Do you have ClamAV installed, then you will see this message. > > >I see. I am using ClamAv. Thanks Peter. But seems that after scan a > few messages then xmail stops. > > >>> After restart Xmail, the av-filter scan the remain mail again and then >>>everything is fine. Any clues for me?? >> >> >>Do you have set the correct version in checkvirus.cfg? >> > > >I think so. I am using XMail 1.18 and I set the version to 116. I > think it works fine most of the time but only in the case I mentioned > above. I explain my situation again to you here. > >1.I (on the same network as the xmail-server) send an e-mail with > attachment to multiple recipients, say 15. >2.I can see in debug mode that the filter involve correctly and gives > the correct ret code. When you see the correct ret code the filter is allready gone. >3.But after a while, xmail stops. >4.I have to restart xmail manually. >5.Then I can see in ps -A that the checkvirus.pl runs and then > clamscan runs. You see checkvirus.pl still running and you see clamscan as subprocess still running? Then you haven't seen an exit code yet I guess. What version of the filter do you use? It is a bit strange to me that when the filter fails or hangs for whatever reason that Xmail then stops. Maybe Davide can say something about that -- Groeten, Peter COFFEE.EXE Missing - Insert Cup and Press Any Key - - Heb je een Dreambox 7000S ? - Kijk eens op http://www.dreamvcr.com - Kijk ook op http://www.lindeman.org - ICQ 22383596 - Uptime lindeman.org - 1 days, 23 hours and 57 minutes, 0 users logged in. - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Xmail stop after sending mai with attachment to multiple recipients
Peter Lindeman ??: > > > You see checkvirus.pl still running and you see clamscan as subprocess > still running? Then you haven't seen an exit code yet I guess. What > version of the filter do you use? Yes. I am using 1.9. > > It is a bit strange to me that when the filter fails or hangs for > whatever reason that Xmail then stops. Maybe Davide can say something > about that > It's also strange and quite annoying to me also. Seems that the filter runs fine but XMail just stops at this situation. Hope that Davide can give me some clues. Gideon - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Xmail stop after sending mai with attachment to multiple recipients
Peter Lindeman ??: > Hello Gideon So, > > >> I have a problem like this: >> >> Xmail works extremely fine most of the time. It's great. Only when I >>send an e-mail with attachment to multiple recipients, it stops. I read >>the >>debug message and seems that it stops after the Av-filter from Peter >>Lindemaninvolved. The debug message is something like this: >> >> rm: cannot remove file >>/var/MailRoot/spool/x/x/mess/xxx.xxx.faith.report file or directory not >>found. > > > You can sometime see this message in debug mode but this is not a problem. > Do you have ClamAV installed, then you will see this message. I see. I am using ClamAv. Thanks Peter. But seems that after scan a few messages then xmail stops. > >>After restart Xmail, the av-filter scan the remain mail again and then >>everything is fine. Any clues for me?? > > > Do you have set the correct version in checkvirus.cfg? > I think so. I am using XMail 1.18 and I set the version to 116. I think it works fine most of the time but only in the case I mentioned above. I explain my situation again to you here. 1.I (on the same network as the xmail-server) send an e-mail with attachment to multiple recipients, say 15. 2.I can see in debug mode that the filter involve correctly and gives the correct ret code. 3.But after a while, xmail stops. 4.I have to restart xmail manually. 5.Then I can see in ps -A that the checkvirus.pl runs and then clamscan runs. 6.Everything back to normal. Hope this helps. Thanks. Gideon - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
[xmail] Re: Xmail stop after sending mai with attachment to multiple recipients
Hello Gideon So, > I have a problem like this: > > Xmail works extremely fine most of the time. It's great. Only when I > send an e-mail with attachment to multiple recipients, it stops. I read > the > debug message and seems that it stops after the Av-filter from Peter > Lindemaninvolved. The debug message is something like this: > >rm: cannot remove file > /var/MailRoot/spool/x/x/mess/xxx.xxx.faith.report file or directory not > found. You can sometime see this message in debug mode but this is not a problem. Do you have ClamAV installed, then you will see this message. > After restart Xmail, the av-filter scan the remain mail again and then > everything is fine. Any clues for me?? Do you have set the correct version in checkvirus.cfg? -- Groeten, Peter - To unsubscribe from this list: send the line "unsubscribe xmail" in the body of a message to [EMAIL PROTECTED] For general help: send the line "help" in the body of a message to [EMAIL PROTECTED]
