FW: Problem in clone mode with two display card
Hi, In case we replace the i810 below in the Device section by intel. Then none of the multimonitor modes work with ATI Card. Kindly let us know why this is happening. Section Device Identifier Card1 Driver i810 VendorName Intel Corporation BoardName Integrated Graphics Controller BusID PCI:0:2:0 EndSection Section Device Identifier Card0 Driver ati VendorName ATI BoardName Rage Mobility P/M ChipSet ati ChipId 0x4c52 ChipRev 0x64 BusID PCI:2:0:0 EndSection Best Regards Deepak Bhatia -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan Hourihane Sent: Tuesday, August 12, 2008 1:40 PM To: Ashish Jain Cc: [EMAIL PROTECTED] Subject: RE: Problem in clone mode with two display card On Tue, 2008-08-12 at 10:45 +0530, Ashish Jain wrote: Dear Alan, Thanks, we have achieved Clone mode. But I have few queries, 1. When we are trying dual head on laptop (HP laptop which have Intel display card with to port) for driver i810 then we will have to specifically add the line Option MonitorLayout CRT,LFP in Device section. But when we are trying dual head on same laptop for driver intel then above line is not required. Why? The i810 driver uses the BIOS and that older driver requires some manual configuration. The intel driver uses the new randr extension and can detect when monitors are attached. 2. When we are trying clone mode on laptop (HP laptop which have Intel display card with to port) then we will have to specifically add the line Option Clone True in all the Device sections. But when we are trying Clone mode on desktop with two display card then above line is not required. Why? Because the Clone option is controlling a single card and it needs to know when do display cloning. 3. Finally, are the settings of xorg.conf file changed according to setuation? Means setting of xorg.conf files depends upon drive used or laptop/desktop used or hardware (like display card, monitor, etc.) used. Yes, but that's virtually gone with the new Xserver 1.3 and RandR 1.2 as it's pretty much all dynamic now. Alan. ___ xorg mailing list [EMAIL PROTECTED] http://lists.freedesktop.org/mailman/listinfo/xorg Disclaimer: This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. ___ xorg-driver-ati mailing list xorg-driver-ati@lists.x.org http://lists.x.org/mailman/listinfo/xorg-driver-ati
ATI Cards with VGA and DVI Ports
Hi, We are trying to do multimonitor/dual head using the ATI Cards which has the VGA Port and DVI port. We are told that we can connect DVI to VGA connector to get VGA output on the DVI connector. My Question: Can we get dual head using this way ? Do the DVI output has any affect when we write the xorg.conf file ? Best Regards Deepak Bhatia Disclaimer: This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. ___ xorg-driver-ati mailing list xorg-driver-ati@lists.x.org http://lists.x.org/mailman/listinfo/xorg-driver-ati
http://listas.softwarelivre.org/pipermail/multilinux/2008-February/001068.html
Hi, We have an ATI Card which we install the PCI bus. When we run Xorg -configure, we get the following output. Is this display card is the ATI Radeon 7000 card ? Best Regards Deepak Bhatia Section Device Identifier Card1 Driver ati VendorName ATI BoardName 3D Rage LT Pro ChipSet ati ChipId 0x4c49 ChipRev 0xdc BusID PCI:2:0:0 EndSection Disclaimer: This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. ___ xorg-driver-ati mailing list xorg-driver-ati@lists.x.org http://lists.x.org/mailman/listinfo/xorg-driver-ati
Radeon Desktop Video Cards
Hello, We have got a Radeon 7000 64 MB PCI card. When we install the driver for the same on the desktop (Windows XP) and reboot the machine to take Video Card from PCI slot (PC BIOS Setting), the Radeon 7000 64 MB PCI card doesn't give any video output. When we make the PC boot with on board VGA card and Radeon 7000 card as the secondary card on the PCI Slot. When we select the Radeon Card, the system (Windows XP) hangs. Kindly let us know if somebody has faced this issue. Regards Deepak Bhatia Disclaimer: This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. ___ xorg-driver-ati mailing list xorg-driver-ati@lists.x.org http://lists.x.org/mailman/listinfo/xorg-driver-ati
Radeon Desktop Video Cards
Hi, We want to try the multimonitor with two Radeon Cards, but our limitation is X11R7.1. Kindly help us in understanding that whether multimonitor is possible using Radeon driver in X11R7.1. 1. http://ati.amd.com/products/home-office.html Radeon Series Cards for the Desktop ATI Radeon(tm) HD 4800 Series http://ati.amd.com/products/Radeonhd4800/index.html ATI Radeon(tm) HD 3800 Series http://ati.amd.com/products/Radeonhd3800/index.html ATI Radeon(tm) HD 3600 Series http://ati.amd.com/products/Radeonhd3600/index.html ATI Radeon(tm) HD 3400 Series http://ati.amd.com/products/Radeonhd3400/index.html ATI Radeon(tm) HD 2900 Series http://ati.amd.com/products/Radeonhd2900/index.html ATI Radeon(tm) HD 2600 Series ATI Radeon(tm) HD 2400 Series http://ati.amd.com/products/Radeonhd2900/index.html ATI Radeon(tm) X1950 Series http://ati.amd.com/products/radeonx1950/index.html ATI Radeon(tm) X1900 Series http://ati.amd.com/products/radeonx1900/index.html ATI Radeon(tm) X1800 Series http://ati.amd.com/products/radeonx1800/index.html ATI Radeon(tm) X1650 Series http://ati.amd.com/products/RadeonX1650/index.html ATI Radeon(tm) X1600 Series http://ati.amd.com/products/radeonx1600/index.html ATI Radeon(tm) X1550 Series http://ati.amd.com/products/radeonx1550/index.html ATI Radeon(tm) X1300 Series http://ati.amd.com/products/RadeonX1300/index.html ATI Radeon(tm) X1050 Series http://ati.amd.com/products/RadeonX1050/index.html%20 Regards Deepak Bhatia Disclaimer: This message and any attachment(s) contained here are information that is confidential, proprietary to NEC HCL System Technologies and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. ___ xorg-driver-ati mailing list xorg-driver-ati@lists.x.org http://lists.x.org/mailman/listinfo/xorg-driver-ati
