Re: [Xpert]xgamma not working with second head of MGA G400 AGP
On Thu, 21 Feb 2002, Mark Vojkovich wrote: > On Wed, 20 Feb 2002, Don Armstrong wrote: >> I have a 3 (well, trying to make it 4 if I can get the second voodoo >> to soft boot) head system, and for some odd reason, xgamma won't >> change the gamma of the second MGA head, while it will change the >> gamma of the first head no problem. > > Their hardware doesn't support that (no palettes on the second head). And there's no method to tweak the output voltage? Bummer. Don Armstrong -- Always try to do things in chronological order. It's less confusing that way. http://www.donarmstrong.com http://www.anylevel.com http://rzlab.ucr.edu ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]xgamma not working with second head of MGA G400 AGP
I have a 3 (well, trying to make it 4 if I can get the second voodoo to soft boot) head system, and for some odd reason, xgamma won't change the gamma of the second MGA head, while it will change the gamma of the first head no problem. dual:~$ xgamma -s 0 -> Red 1.237, Green 1.239, Blue 1.374 dual:~$ xgamma -s 1 -> Red 1.300, Green 1.300, Blue 1.300 dual:~$ xgamma -s 2 -> Red 3.000, Green 3.000, Blue 3.000 dual:~$ xgamma -s 2 -rg 5 -bg 5 -gg 5 -> Red 3.000, Green 3.000, Blue 3.000 <- Red 5.000, Green 5.000, Blue 5.000 At this point, I should be staring at a totally washed out 3rd head, but nothing happens. Ideas? Don Armstrong -- Always try to do things in chronological order. It's less confusing that way. http://www.donarmstrong.com http://www.anylevel.com http://rzlab.ucr.edu ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
[Xpert]int10 not softbooting second Voodoo 3 3000 PCI
I picked up a second Voodoo3 card today (ontop of my other PCI one and an AGP Matrox G400 DH), and was about ready to set it up to work in XFree86-4.1.0 (havent installed 4.2 yet, will test it there as well in a while). Unfortunatly, it seems that int10 was unable to softboot the second voodoo3 (at PCI:0:19:0). It would boot the first just fine (at PCI:0:18:0), even when the first wasn't setup by the bios (my original setting). The second would load perfectly when it was the only PCI video card (both setup/not setup by the bios). XFree86 would still continue to load and allocate memory and screen realestate to the non-booted video card (and I presume draw to it as well, but I'm not quite certain of that.) even though the card wasn't booted, and no signal was being shoved out of it. I suspect that this is just a bug in the int10 module that hasn't been discovered yet because few people are working with 4 heads... but I could be mistaken. (Like the boot signal is being sent to the wrong card as it tries to boot the second card... although it does correctly report a boot failure...) What should I do now? (Has this problem been adressed in 4.2.0 or cvs?) Don Armstrong -- Always try to do things in chronological order. It's less confusing that way. http://www.donarmstrong.com http://www.anylevel.com http://rzlab.ucr.edu ___ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
