Re: SOLVED [Xpert]Fw: Segmentation fault

[Trevor Fraser]

Thanks a whole lot, I'm using the exact same chip set and I think you must
have solved a problem for many out there.  I'll keep this mail close by if
you don't mind, and forward to anybody with the same problem.

Thanks again, on behalf of all whom this helps.
Trevor.

- Original Message -
From: Neil R. Simon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, September 11, 2002 4:53 AM
Subject: SOLVED [Xpert]Fw: Segmentation fault


 Hi Trevor.  I saw your post on XFree86.org, and just solved that same
problem on
 my box.

 I've noticed many posts recently that describe this same problem.
Especially
 when people upgrade to RH 7.3 from an earlier rev that worked just fine.

 I traced this to the RH 7.3 installation program having made an erroneous
 symbolic link of the X server.

 Was: /usr/X11R6/bin/X - /usr/X11R6/bin/XFree86 (the 4.2.0 X server)

 Should be: /usr/X11R6/bin/X - /usr/X11R6/bin/XF86_S3 (the 3.3.6 X server,
which
 the installation program DID properly install, but DID NOT link to).

 XF86_S3 may not, however, be the right X server on your particular box if
you
 have a different video chipset.

 However, you should be able to find the right one to link to in your
 /usr/X11R6/bin directory.

 If you want to relink the X symlink, here's what to do:

 1) chdir to the X bin directory
 # cd /usr/X11R6/bin

 2) remove the existing symbolic link of X
 # rm X

 3) relink to X server that your 7.3 installer created for your S3 Trio64
chipset

 # ln -s XF86_S3 X

 4) update the permissionsons on the XF86_S3 server (or only root will be
able
 to run the startx command)
 # chmod 4711 XF86_S3

 Hope this helps.

 Regards, Neil

___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert

[Xpert]NEC Model No: C 1410

[Trevor Fraser]

Hello all.

Anyone using this monitor and can tell me the horiz 
and vert refresh rate and all that info so I can write an appropriate config 
file, or even better, a XF86config-4 file that will work on such a 
monitor. I can't get Xconfigurator to work, says segmentation 
fault.

Thanks, Trevor.

=Stussy said:"Knowledge 
is King!=

Re: [Xpert]S3 Trio 64 V+ Bug Report progress?

[Trevor Fraser]

I'm having the same problem, and still no reply! Please send reply if you
hear anything, this is holding me up, I need x-windows running to monitor my
UPS, which could crash my whole system if it doesn't work properly. . .

___
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert

[Xpert]Fw: Segmentation fault

[Trevor Fraser]

- Original Message -
From: Trevor Fraser [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 08, 2002 12:46 PM
Subject: Segmentation fault


 Hello all.

 After reading through a couple of hundred archive e-mails, I understand
that
 the fault Segmentation Fault after trying to execute Xconfigurator can
be
 quite broad area. Never the less, I've attached my log file, can anyone
here
 guide me to where the problem lies.

 I've upgraded from 7.1 to Red Hat Linux 7.3, kernel 2.4.18-3 on an i586
  The prog. was using i386 before upgrade) and since the upgrade I haven't
 been able to use x-windows. I haven't tried though for quite some time
after
 the upgrade.

 Guidance will be greatly appreciated.
 Thanks, Trevor.




XFree86.0.log
Description: Binary data