[Yahoo-eng-team] [Bug 1868246] Re: No network after subiquity LPAR installation on s390x with VLAN
** Changed in: initramfs-tools (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Yahoo! Engineering Team, which is subscribed to cloud-init. https://bugs.launchpad.net/bugs/1868246 Title: No network after subiquity LPAR installation on s390x with VLAN Status in cloud-init: Invalid Status in subiquity: Fix Released Status in Ubuntu on IBM z Systems: Fix Released Status in initramfs-tools package in Ubuntu: Fix Released Bug description: I tried today an subiquity LPAR installation using the latest ISO (March 19) that includes the latest 20.03 subiquity. The installation itself completed fine, but after the post-install reboot the system didn't had a network active - please note that the LPAR is connected to a VLAN. $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: encc000: mtu 1500 qdisc noop state DOWN group default q len 1000 link/ether a2:8d:91:85:12:e3 brd ff:ff:ff:ff:ff:ff 3: enP1p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b8:70 brd ff:ff:ff:ff:ff:ff 4: enP1p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b8:71 brd ff:ff:ff:ff:ff:ff 5: enP2p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b7:00 brd ff:ff:ff:ff:ff:ff 6: enP2p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b7:01 brd ff:ff:ff:ff:ff:ff Wanting to have a look at the netplan config it turned out that there is no yaml file: $ ls -l /etc/netplan/ total 0 Adding one manually and applying it worked fine. So looks like the installer does not properly generate or copy a 01-netcfg.yaml to /etc/netplan. Please see below the entire steps as well as a compressed file with the entire content of /var/log To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1868246/+subscriptions -- Mailing list: https://launchpad.net/~yahoo-eng-team Post to : yahoo-eng-team@lists.launchpad.net Unsubscribe : https://launchpad.net/~yahoo-eng-team More help : https://help.launchpad.net/ListHelp
[Yahoo-eng-team] [Bug 1868246] Re: No network after subiquity LPAR installation on s390x with VLAN
and one more typo ** Also affects: initramfs-tools (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Yahoo! Engineering Team, which is subscribed to cloud-init. https://bugs.launchpad.net/bugs/1868246 Title: No network after subiquity LPAR installation on s390x with VLAN Status in cloud-init: Invalid Status in subiquity: Fix Released Status in Ubuntu on IBM z Systems: Fix Released Status in initramfs-tools package in Ubuntu: New Bug description: I tried today an subiquity LPAR installation using the latest ISO (March 19) that includes the latest 20.03 subiquity. The installation itself completed fine, but after the post-install reboot the system didn't had a network active - please note that the LPAR is connected to a VLAN. $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: encc000: mtu 1500 qdisc noop state DOWN group default q len 1000 link/ether a2:8d:91:85:12:e3 brd ff:ff:ff:ff:ff:ff 3: enP1p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b8:70 brd ff:ff:ff:ff:ff:ff 4: enP1p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b8:71 brd ff:ff:ff:ff:ff:ff 5: enP2p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b7:00 brd ff:ff:ff:ff:ff:ff 6: enP2p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b7:01 brd ff:ff:ff:ff:ff:ff Wanting to have a look at the netplan config it turned out that there is no yaml file: $ ls -l /etc/netplan/ total 0 Adding one manually and applying it worked fine. So looks like the installer does not properly generate or copy a 01-netcfg.yaml to /etc/netplan. Please see below the entire steps as well as a compressed file with the entire content of /var/log To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1868246/+subscriptions -- Mailing list: https://launchpad.net/~yahoo-eng-team Post to : yahoo-eng-team@lists.launchpad.net Unsubscribe : https://launchpad.net/~yahoo-eng-team More help : https://help.launchpad.net/ListHelp
[Yahoo-eng-team] [Bug 1868246] Re: No network after subiquity LPAR installation on s390x with VLAN
When using today's ISO, with only a single disk drive attached, and snap refreshed from edge channel, one should be able to complete the install with networking not getting interrupted, and correctly have networking in the target too. ** Changed in: ubuntu-z-systems Status: New => Fix Released ** Changed in: subiquity Status: New => Fix Released -- You received this bug notification because you are a member of Yahoo! Engineering Team, which is subscribed to cloud-init. https://bugs.launchpad.net/bugs/1868246 Title: No network after subiquity LPAR installation on s390x with VLAN Status in cloud-init: Invalid Status in subiquity: Fix Released Status in Ubuntu on IBM z Systems: Fix Released Bug description: I tried today an subiquity LPAR installation using the latest ISO (March 19) that includes the latest 20.03 subiquity. The installation itself completed fine, but after the post-install reboot the system didn't had a network active - please note that the LPAR is connected to a VLAN. $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: encc000: mtu 1500 qdisc noop state DOWN group default q len 1000 link/ether a2:8d:91:85:12:e3 brd ff:ff:ff:ff:ff:ff 3: enP1p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b8:70 brd ff:ff:ff:ff:ff:ff 4: enP1p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b8:71 brd ff:ff:ff:ff:ff:ff 5: enP2p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b7:00 brd ff:ff:ff:ff:ff:ff 6: enP2p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b7:01 brd ff:ff:ff:ff:ff:ff Wanting to have a look at the netplan config it turned out that there is no yaml file: $ ls -l /etc/netplan/ total 0 Adding one manually and applying it worked fine. So looks like the installer does not properly generate or copy a 01-netcfg.yaml to /etc/netplan. Please see below the entire steps as well as a compressed file with the entire content of /var/log To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1868246/+subscriptions -- Mailing list: https://launchpad.net/~yahoo-eng-team Post to : yahoo-eng-team@lists.launchpad.net Unsubscribe : https://launchpad.net/~yahoo-eng-team More help : https://help.launchpad.net/ListHelp
[Yahoo-eng-team] [Bug 1868246] Re: No network after subiquity LPAR installation on s390x with VLAN
1) cloud-init should be fixed for /run/netplan/* which is another bug 2) this bug is about subiquity not deleting/tearing down critical connections ** This bug is no longer a duplicate of bug 1861460 cloud-init should parse initramfs rendered netplan if present ** Changed in: cloud-init Status: New => Invalid -- You received this bug notification because you are a member of Yahoo! Engineering Team, which is subscribed to cloud-init. https://bugs.launchpad.net/bugs/1868246 Title: No network after subiquity LPAR installation on s390x with VLAN Status in cloud-init: Invalid Status in subiquity: New Status in Ubuntu on IBM z Systems: New Bug description: I tried today an subiquity LPAR installation using the latest ISO (March 19) that includes the latest 20.03 subiquity. The installation itself completed fine, but after the post-install reboot the system didn't had a network active - please note that the LPAR is connected to a VLAN. $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: encc000: mtu 1500 qdisc noop state DOWN group default q len 1000 link/ether a2:8d:91:85:12:e3 brd ff:ff:ff:ff:ff:ff 3: enP1p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b8:70 brd ff:ff:ff:ff:ff:ff 4: enP1p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b8:71 brd ff:ff:ff:ff:ff:ff 5: enP2p0s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 82:0c:2d:0c:b7:00 brd ff:ff:ff:ff:ff:ff 6: enP2p0s0d1: mtu 1500 qdisc noop state DOWN group defaul t qlen 1000 link/ether 82:0c:2d:0c:b7:01 brd ff:ff:ff:ff:ff:ff Wanting to have a look at the netplan config it turned out that there is no yaml file: $ ls -l /etc/netplan/ total 0 Adding one manually and applying it worked fine. So looks like the installer does not properly generate or copy a 01-netcfg.yaml to /etc/netplan. Please see below the entire steps as well as a compressed file with the entire content of /var/log To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-init/+bug/1868246/+subscriptions -- Mailing list: https://launchpad.net/~yahoo-eng-team Post to : yahoo-eng-team@lists.launchpad.net Unsubscribe : https://launchpad.net/~yahoo-eng-team More help : https://help.launchpad.net/ListHelp
[Yahoo-eng-team] [Bug 1868246] Re: No network after subiquity LPAR installation on s390x with VLAN
Some additional information: Early in the subiquity installation process (right after disk device enablement) I can see two files in /etc/netplan/: 00-installer-config.yaml 50-cloud-init.yaml.dist-subiquity I think both are not as they should be for this VLAN environment. After replacing them with: network: version: 2 renderer: networkd ethernets: encc000: dhcp4: no dhcp6: no vlans: encc000.2653: id: 2653 link: encc000 addresses: [ 10.245.236.15/24 ] gateway4: 10.245.236.1 nameservers: search: [ canonical.com ] addresses: - 10.245.236.1 I was able to bring up the network (in the subiquity shell) using netplan apply. (I also disabled/enabled 0.0.c000 - but I think it was not needed). Unfortunately there is still no network online after the post-install reboot: $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: encc000: mtu 1500 qdisc mq state UP group d efault qlen 1000 link/ether 16:9e:e9:36:c4:90 brd ff:ff:ff:ff:ff:ff inet6 fe80::149e:e9ff:fe36:c490/64 scope link valid_lft forever preferred_lft forever 3: encc000.2653@encc000: mtu 1500 qdisc noqueu e state UP group default qlen 1000 link/ether 16:9e:e9:36:c4:90 brd ff:ff:ff:ff:ff:ff inet6 fe80::149e:e9ff:fe36:c490/64 scope link valid_lft forever preferred_lft forever ...since the following netplan yaml is in place - which is not correct: $ cat /etc/netplan/50-cloud-init.yaml # This file is generated from information provided by the datasource. Changes # to it will not persist across an instance reboot. To disable cloud-init's # network configuration capabilities, write a file # /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following: # network: {config: disabled} network: ethernets: encc000: {} version: 2 vlans: encc000.2653: id: 2653 link: encc000 nameservers: addresses: - 10.245.236.1 Replacing it again by the above (known to work) yaml allows to bring the network up again (with the help of netplan). I add cloud-init as affected package and let the maintainers decide if this is a duplicate or not (see previous comment). ** Also affects: cloud-init Importance: Undecided Status: New -- You received this bug notification because you are a member of Yahoo! Engineering Team,