Re: [zd1211-devs] Different hardware versions of Longshine LCS-8131G3 (1582:6003)
Hi Uli, Hi Daniel, thanks for your quick answers. Unfortunately I am not able ( dunno how ;) ) to set this flags in EEPROM and so I have to wait until you guys might help me out. To show Daniel that my issue is not al2230s related, I patched the zd1211rw files to the recent al2230s recognition (2.6.20 without any modifications). Here are the two debug outputs #- The first (serial number starts with 8131G3040...): zd1211rw 1-1:1.0: zd_usb_enable_int() zd1211rw 1-1:1.0: zd_usb_enable_int() submit urb c3cc53c0 zd1211rw 1-1:1.0: zd_chip_init_hw() zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 0x zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 0x zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 0x zd1211rw 1-1:1.0: zd_usb_init_hw() fw_base_offset: 0xf7f1 zd1211rw 1-1:1.0: read_pod() E2P_POD 0x8104 zd1211rw 1-1:1.0: read_pod() RF AL2230_RF 0x4 PA type 0x0 patch CCK 1 patch CR157 0 patch 6M 0 new PHY 1 link LED2 tx led 1 zd1211rw 1-1:1.0: hw_init() zd1211rw 1-1:1.0: zd1211b_hw_reset_phy() zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0x00 -> 0x00 zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x00 -> 0x80 zd1211rw 1-1:1.0: zd1211b_hw_init_hmac() zd1211rw 1-1:1.0: get_aw_pt_bi() aw 0 pt 0 bi 0 zd1211rw 1-1:1.0: set_aw_pt_bi() aw 0 pt 99 bi 100 zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x025a000 bits 24 zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 zd1211rw 1-1:1.0: firmware version 4725 zd1211rw 1-1:1.0: dump_fw_registers() FW_FIRMWARE_VER 0x4725 zd1211rw 1-1:1.0: dump_fw_registers() FW_USB_SPEED 0x zd1211rw 1-1:1.0: dump_fw_registers() FW_FIX_TX_RATE 0x zd1211rw 1-1:1.0: dump_fw_registers() FW_LINK_STATUS 0x zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 0x0001 zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 0x zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 0x zd1211rw 1-1:1.0: zd1211b chip 1582:6003 v4810 full 00-11-f6 AL2230_RF pa0 g--N- zd1211rw 1-1:1.0: zd_write_mac_addr() mac addr 00:11:f6:7f:e6:ef zd1211rw 1-1:1.0: zd_read_regdomain() regdomain: 0x30 zd1211rw 1-1:1.0: regdomain 0x30 zd1211rw 1-1:1.0: zd_usb_disable_int() urb c3cc53c0 killed zd1211rw 1-1:1.0: probe() successful zd1211rw 1-1:1.0: eth1 #- The second (serial number starts with 8131G3030...): zd1211rw 1-1:1.0: zd_usb_enable_int() zd1211rw 1-1:1.0: zd_usb_enable_int() submit urb c3cc51c0 zd1211rw 1-1:1.0: zd_chip_init_hw() zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 0x zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 0x zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 0x zd1211rw 1-1:1.0: zd_usb_init_hw() fw_base_offset: 0xf7f1 zd1211rw 1-1:1.0: read_pod() E2P_POD 0x0004 zd1211rw 1-1:1.0: read_pod() RF AL2230_RF 0x4 PA type 0x0 patch CCK 0 patch CR157 0 patch 6M 0 new PHY 0 link LED2 tx led 1 zd1211rw 1-1:1.0: hw_init() zd1211rw 1-1:1.0: zd1211b_hw_reset_phy() zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0x00 -> 0x00 zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x00 -> 0x80 zd1211rw 1-1:1.0: zd1211b_hw_init_hmac() zd1211rw 1-1:1.0: get_aw_pt_bi() aw 0 pt 0 bi 0 zd1211rw 1-1:1.0: set_aw_pt_bi() aw 0 pt 99 bi 100 zd1211rw 1-1:1.0: zd_chip_lock_phy_regs() CR_REG1: 0xa0 -> 0x20 zd1211rw 1-1:1.0: zd_usb_rfwrite() value 0x025a000 bits 24 zd1211rw 1-1:1.0: zd_chip_unlock_phy_regs() CR_REG1: 0x20 -> 0xa0 zd1211rw 1-1:1.0: firmware version 4725 zd1211rw 1-1:1.0: dump_fw_registers() FW_FIRMWARE_VER 0x4725 zd1211rw 1-1:1.0: dump_fw_registers() FW_USB_SPEED 0x zd1211rw 1-1:1.0: dump_fw_registers() FW_FIX_TX_RATE 0x zd1211rw 1-1:1.0: dump_fw_registers() FW_LINK_STATUS 0x zd1211rw 1-1:1.0: dump_cr() CR_AFTER_PNP 0x0001 zd1211rw 1-1:1.0: dump_cr() CR_GPI_EN 0x zd1211rw 1-1:1.0: dump_cr() CR_INTERRUPT 0x zd1211rw 1-1:1.0: zd1211b chip 1582:6003 v4810 full 00-11-f6 AL2230_RF pa0 - zd1211rw 1-1:1.0: zd_write_mac_addr() mac addr 00:11:f6:80:91:6e zd1211rw 1-1:1.0: zd_read_regdomain() regdomain: 0x30 zd1211rw 1-1:1.0: regdomain 0x30 zd1211rw 1-1:1.0: zd_usb_disable_int() urb c3cc51c0 killed zd1211rw 1-1:1.0: probe() successful zd1211rw 1-1:1.0: eth1 Hope this is somehow useful for doing some improvements. Thank you. Greetings from Berlin Ulle Ulrich Kunitz wrote: > > Ulle, > > I have here a 8183G3040... myself, it works quite reasonable > reflecting your experience. The G3030 seems not to have any patch > flags set in the EEPROM. We could however add a patch, which would > set the same flags as for G3040 if there aren't any flags set for a > 1582:6003 device. > > If you don't want to do it on your own, you have to be a little bit > patient, because I'm a little bit short on time. > > Uli > > Am 12.05.2007 um 09:31 schrieb Ulle: > >> >> Hello, >> I got two Longshine LCS-8131G3 sticks which have no obvious >> differences, >> e
Re: [zd1211-devs] Different hardware versions of Longshine LCS-8131G3 (1582:6003)
Ulle wrote: > Does anybody know, what this means? > The second one I can not bring to inject packets, the first works okay with > injection. zd1211rw does not support injection so you must be using a modified driver. Please try normal operation with a clean driver. Also, use a newer kernel. Another flag is now interpreted, for AL2230S devices. Daniel - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
Re: [zd1211-devs] Different hardware versions of Longshine LCS-8131G3 (1582:6003)
Ulle, I have here a 8183G3040... myself, it works quite reasonable reflecting your experience. The G3030 seems not to have any patch flags set in the EEPROM. We could however add a patch, which would set the same flags as for G3040 if there aren't any flags set for a 1582:6003 device. If you don't want to do it on your own, you have to be a little bit patient, because I'm a little bit short on time. Uli Am 12.05.2007 um 09:31 schrieb Ulle: > > Hello, > I got two Longshine LCS-8131G3 sticks which have no obvious > differences, > except a tiny one in dmesg: > > The first (serial number starts with 8131G3040...): > usb 1-1: new full speed USB device using uhci_hcd and address 23 > usb 1-1: configuration #1 chosen from 1 choice > zd1211rw 1-1:1.0: firmware version 4725 > zd1211rw 1-1:1.0: zd1211b chip 1582:6003 v4810 full 00-11-f6 > AL2230_RF pa0 > g--N > zd1211rw 1-1:1.0: eth1 > > The second (serial number starts with 8131G3030...): > usb 1-1: new full speed USB device using uhci_hcd and address 21 > usb 1-1: configuration #1 chosen from 1 choice > zd1211rw 1-1:1.0: firmware version 4725 > zd1211rw 1-1:1.0: zd1211b chip 1582:6003 v4810 full 00-11-f6 > AL2230_RF pa0 > > zd1211rw 1-1:1.0: eth1 > > Note the pa0 g--N and pa0 . > > Does anybody know, what this means? > The second one I can not bring to inject packets, the first works > okay with > injection. > > weird: I bought the second one half a year later then the first, > but with > lower serial number :) > > How can those devices behave differently? > > Thanks for answers > Ulle > > P.S.: Sorry if posted twice. > > -- > View this message in context: http://www.nabble.com/Different- > hardware-versions-of-Longshine-LCS-8131G3-%281582%3A6003%29- > tf3730927.html#a10443434 > Sent from the zd1211-devs mailing list archive at Nabble.com. > > > -- > --- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > ___ > Zd1211-devs mailing list - http://zd1211.ath.cx/ > Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs -- Uli Kunitz - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
[zd1211-devs] Different hardware versions of Longshine LCS-8131G3 (1582:6003)
Hello, I got two Longshine LCS-8131G3 sticks which have no obvious differences, except a tiny one in dmesg: The first (serial number starts with 8131G3040...): usb 1-1: new full speed USB device using uhci_hcd and address 23 usb 1-1: configuration #1 chosen from 1 choice zd1211rw 1-1:1.0: firmware version 4725 zd1211rw 1-1:1.0: zd1211b chip 1582:6003 v4810 full 00-11-f6 AL2230_RF pa0 g--N zd1211rw 1-1:1.0: eth1 The second (serial number starts with 8131G3030...): usb 1-1: new full speed USB device using uhci_hcd and address 21 usb 1-1: configuration #1 chosen from 1 choice zd1211rw 1-1:1.0: firmware version 4725 zd1211rw 1-1:1.0: zd1211b chip 1582:6003 v4810 full 00-11-f6 AL2230_RF pa0 zd1211rw 1-1:1.0: eth1 Note the pa0 g--N and pa0 . Does anybody know, what this means? The second one I can not bring to inject packets, the first works okay with injection. weird: I bought the second one half a year later then the first, but with lower serial number :) How can those devices behave differently? Thanks for answers Ulle P.S.: Sorry if posted twice. -- View this message in context: http://www.nabble.com/Different-hardware-versions-of-Longshine-LCS-8131G3-%281582%3A6003%29-tf3730927.html#a10443434 Sent from the zd1211-devs mailing list archive at Nabble.com. - This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ ___ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs
