subject:"\[zfs\-discuss\] weird thing with zfs"

Re: [zfs-discuss] weird thing with zfs

2006-12-06 Thread Krzys


Thanks so much.. anyway resilvering worked its way, I got everything resolved
zpool status -v
  pool: mypool
 state: ONLINE
 scrub: none requested
config:

NAMESTATE READ WRITE CKSUM
mypool  ONLINE   0 0 0
  mirrorONLINE   0 0 0
c1t2d0  ONLINE   0 0 0
c1t3d0  ONLINE   0 0 0

errors: No known data errors

  pool: mypool2
 state: ONLINE
 scrub: resilver completed with 0 errors on Tue Dec  5 13:48:31 2006
config:

NAMESTATE READ WRITE CKSUM
mypool2 ONLINE   0 0 0
  raidz ONLINE   0 0 0
c3t0d0  ONLINE   0 0 0
c3t1d0  ONLINE   0 0 0
c3t2d0  ONLINE   0 0 0
c3t3d0  ONLINE   0 0 0
c3t4d0  ONLINE   0 0 0
c3t5d0  ONLINE   0 0 0
c3t6d0  ONLINE   0 0 0

errors: No known data errors

did not change any cables nor anything, just reboot... I will llook into 
replacing cables (those are the short scsi cables.. anyway this is so weird and 
original disk that I replaced seems to be good as well.. it must be connectivity 
problem... but whats weird is that I had it running for months without 
problems...


Regards and thanks to all for help.

Chris



On Tue, 5 Dec 2006, Richard Elling wrote:


BTW, there is a way to check what the SCSI negotiations resolved to.
I wrote about it once in a BluePrint
http://www.sun.com/blueprints/0500/sysperfnc.pdf
See page 11
-- richard

Richard Elling wrote:

This looks more like a cabling or connector problem.  When that happens
you should see parity errors and transfer rate negotiations.
 -- richard

Krzys wrote:

Ok, so here is an update

I did restart my sysyte, I power it off and power it on. Here is screen 
capture of my boot. I certainly do have some hard drive issues and will 
need to take a look at them... But I got my disk back visible to the 
system and zfs is doing resilvering again


Rebooting with command: boot
Boot device: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a  
File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: chrysek
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 6 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Error for Command: read(10)Error Level: Retryable
Requested Block: 286732066 Error Block: 286732066
Vendor: SEAGATESerial Number: 3HY14PVS
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 0x0, 
FRU: 0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 3 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd23):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623842 Error Block: 283623842
Vendor: SEAGATESerial Number: 3HY8HS7L
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 0x0, 
FRU: 0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 5 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd25):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623458 Error Block: 283623458
Vendor: SEAGATESerial Number: 3HY0LF18
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 0x0, 
FRU: 0x2

/kernel/drv/sparcv9/zpool symbol avl_add multiply defined
/kernel/drv/sparcv9/zpool symbol assfail3 multiply defined
WARNING: kstat_create('unix', 0, 'dmu_buf_impl_t'): namespace collision
mypool2/d3 uncorrectable error
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is logging.

chrysek console login: VERITAS SCSA Generic Revision: 3.5c
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp 
missing
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp 
missing

Dec  5 13:01:46 chrysek VERITAS: No proxy found.
Dec  5 13:01:52 chrysek vmd[546]: ready for connections
Dec  5 13:01:53 chrysek VERITAS: No proxy found.
Dec  5 13:01:54

[zfs-discuss] weird thing with zfs

2006-12-05 Thread Krzys



ok, two weeks ago I did notice one of my disk in zpool got problems.
I was getting Corrupt label; wrong magic number messages, then when I looked 
in format it did not see that disk... (last disk) I had that setup running for 
few months now and all of the sudden last disk failed. So I ordered another 
disk, had it replaced like a week ago, I did issue replace command after disk 
replacement, it was resilvering disks since forever, then I got hints from this 
group that snaps could be causing it so yesterday I did disable snaps and this 
morning I di dnotice the same disk that I replaced is gone... Does it seem weird 
that this disk would fail? Its new disk... I have Solaris 10 U2, 4 internal 
drives and then 7 external drives which are in single enclousures connected via 
scsi chain to each other... So it seems like last disk is failing. Those nipacks 
from sun have self termination so there is no terminator at the end... Any ideas 
what should I do? Do I need to order another drive and replace that one too? Or 
will it happen again? What do you think could be the problem? Ah, when I look at 
that enclosure I do see green light on it so it seems like it did not fail...


format
Searching for disks...
efi_alloc_and_init failed.
done


AVAILABLE DISK SELECTIONS:
   0. c1t0d0 SEAGATE-ST337LC-D703 cyl 45265 alt 2 hd 16 sec 809
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   1. c1t1d0 SEAGATE-ST337LC-D703 cyl 45265 alt 2 hd 16 sec 809
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   2. c1t2d0 SEAGATE-ST337LC-D703-279.40GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   3. c1t3d0 SEAGATE-ST337LC-D703-279.40GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   4. c3t0d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   5. c3t1d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   6. c3t2d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   7. c3t3d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   8. c3t4d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   9. c3t5d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
  10. c3t6d0 drive type unknown
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0



zpool status -v
  pool: mypool
 state: ONLINE
 scrub: none requested
config:

NAMESTATE READ WRITE CKSUM
mypool  ONLINE   0 0 0
  mirrorONLINE   0 0 0
c1t2d0  ONLINE   0 0 0
c1t3d0  ONLINE   0 0 0

errors: No known data errors

  pool: mypool2
 state: DEGRADED
 scrub: resilver completed with 0 errors on Mon Dec  4 22:34:57 2006
config:

NAME  STATE READ WRITE CKSUM
mypool2   DEGRADED 0 0 0
  raidz   DEGRADED 0 0 0
c3t0d0ONLINE   0 0 0
c3t1d0ONLINE   0 0 0
c3t2d0ONLINE   0 0 0
c3t3d0ONLINE   0 0 0
c3t4d0ONLINE   0 0 0
c3t5d0ONLINE   0 0 0
replacing UNAVAIL  0   775 0  insufficient replicas
  c3t6d0s0/o  UNAVAIL  0 0 0  cannot open
  c3t6d0  UNAVAIL  0   940 0  cannot open

errors: No known data errors

___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Krzys

Thanks, ah another wird thing is that when I run format on that frive I get 
a coredump :(


format
Searching for disks...
efi_alloc_and_init failed.
done


AVAILABLE DISK SELECTIONS:
   0. c1t0d0 SEAGATE-ST337LC-D703 cyl 45265 alt 2 hd 16 sec 809
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   1. c1t1d0 SEAGATE-ST337LC-D703 cyl 45265 alt 2 hd 16 sec 809
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   2. c1t2d0 SEAGATE-ST337LC-D703-279.40GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   3. c1t3d0 SEAGATE-ST337LC-D703-279.40GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   4. c3t0d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   5. c3t1d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   6. c3t2d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   7. c3t3d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   8. c3t4d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   9. c3t5d0 SEAGATE-ST3146807LC-0007-136.73GB
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
  10. c3t6d0 drive type unknown
  /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
Specify disk (enter its number): 10

Segmentation Fault (core dumped)

:( Cant even get to format menu on that drive...

Chris



On Tue, 5 Dec 2006, Nicholas Senedzuk wrote:


The only time that I have seen a format return drive type unknown is when
the drive has failed. You may just have another bad drive and want to try
replacing it again. If that does not work you, you may have another problem
such as a bad backplane or a bad SCSI cable assuming the drive is an
external drive. Hope that helps.




On 12/5/06, Krzys [EMAIL PROTECTED] wrote:



ok, two weeks ago I did notice one of my disk in zpool got problems.
I was getting Corrupt label; wrong magic number messages, then when I
looked
in format it did not see that disk... (last disk) I had that setup running
for
few months now and all of the sudden last disk failed. So I ordered
another
disk, had it replaced like a week ago, I did issue replace command after
disk
replacement, it was resilvering disks since forever, then I got hints from
this
group that snaps could be causing it so yesterday I did disable snaps and
this
morning I di dnotice the same disk that I replaced is gone... Does it seem
weird
that this disk would fail? Its new disk... I have Solaris 10 U2, 4
internal
drives and then 7 external drives which are in single enclousures
connected via
scsi chain to each other... So it seems like last disk is failing. Those
nipacks
from sun have self termination so there is no terminator at the end... Any
ideas
what should I do? Do I need to order another drive and replace that one
too? Or
will it happen again? What do you think could be the problem? Ah, when I
look at
that enclosure I do see green light on it so it seems like it did not
fail...

format
Searching for disks...
efi_alloc_and_init failed.
done


AVAILABLE DISK SELECTIONS:
0. c1t0d0 SEAGATE-ST337LC-D703 cyl 45265 alt 2 hd 16 sec 809
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
1. c1t1d0 SEAGATE-ST337LC-D703 cyl 45265 alt 2 hd 16 sec 809
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
2. c1t2d0 SEAGATE-ST337LC-D703-279.40GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
3. c1t3d0 SEAGATE-ST337LC-D703-279.40GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
4. c3t0d0 SEAGATE-ST3146807LC-0007-136.73GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
5. c3t1d0 SEAGATE-ST3146807LC-0007-136.73GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
6. c3t2d0 SEAGATE-ST3146807LC-0007-136.73GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
7. c3t3d0 SEAGATE-ST3146807LC-0007-136.73GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
8. c3t4d0 SEAGATE-ST3146807LC-0007-136.73GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
9. c3t5d0 SEAGATE-ST3146807LC-0007-136.73GB
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
   10. c3t6d0 drive type unknown
   /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0



zpool status -v
   pool: mypool
  state: ONLINE
  scrub: none requested
config:

 NAMESTATE READ WRITE CKSUM
 mypool  ONLINE

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Torrey McMahon


Krzys wrote:
Thanks, ah another wird thing is that when I run format on that 
frive I get a coredump :(


Run pstack /path/to/core and send the output.
___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Krzys


[12:00:40] [EMAIL PROTECTED]: /d/d3/nb1  pstack core
core 'core' of 29506:   format -e
-  lwp# 1 / thread# 1  
 000239b8 c_disk   (51800, 52000, 4bde4, 525f4, 54e78, 0) + 4e0
 00020fb4 main (2, 0, ffbff8e8, 0, 52000, 29000) + 46c
 000141a8 _start   (0, 0, 0, 0, 0, 0) + 108
-  lwp# 2 / thread# 2  
 ff241818 _door_return (0, 0, 0, 0, fef92400, ff26cbc0) + 10
 ff0c0c30 door_create_func (0, feefc000, 0, 0, ff0c0c10, 0) + 20
 ff2400b0 _lwp_start (0, 0, 0, 0, 0, 0)
-  lwp# 3 / thread# 3  
 ff240154 __lwp_park (75e78, 75e88, 0, 0, 0, 0) + 14
 ff23a1e4 cond_wait_queue (75e78, 75e88, 0, 0, 0, 0) + 28
 ff23a764 cond_wait (75e78, 75e88, 1, 0, 0, ff26cbc0) + 10
 ff142a60 subscriber_event_handler (551d8, fedfc000, 0, 0, ff142a2c, 0) + 34
 ff2400b0 _lwp_start (0, 0, 0, 0, 0, 0)



On Tue, 5 Dec 2006, Torrey McMahon wrote:


Krzys wrote:
Thanks, ah another wird thing is that when I run format on that frive I 
get a coredump :(


Run pstack /path/to/core and send the output.


!DSPAM:122,45759fd826586021468!


___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Al Hopper

On Tue, 5 Dec 2006, Krzys wrote:

 Thanks, ah another wird thing is that when I run format on that frive I 
 get
 a coredump :(
... snip 

Try zeroing out the disk label with something like:

dd if=/dev/zero of=/dev/rdsk/c?t?d?p0  bs=1024k count=1024

Regards,

Al Hopper  Logical Approach Inc, Plano, TX.  [EMAIL PROTECTED]
   Voice: 972.379.2133 Fax: 972.379.2134  Timezone: US CDT
OpenSolaris.Org Community Advisory Board (CAB) Member - Apr 2005
 OpenSolaris Governing Board (OGB) Member - Feb 2006
___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Joerg Schilling

Al Hopper [EMAIL PROTECTED] wrote:

 On Tue, 5 Dec 2006, Krzys wrote:

  Thanks, ah another wird thing is that when I run format on that frive I 
  get
  a coredump :(
 ... snip 

 Try zeroing out the disk label with something like:

 dd if=/dev/zero of=/dev/rdsk/c?t?d?p0  bs=1024k count=1024

Do you expect a 1 GB disk label?

Jörg

-- 
 EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
   [EMAIL PROTECTED](uni)  
   [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Al Hopper

On Tue, 5 Dec 2006, Joerg Schilling wrote:

 Al Hopper [EMAIL PROTECTED] wrote:

  On Tue, 5 Dec 2006, Krzys wrote:
 
   Thanks, ah another wird thing is that when I run format on that frive 
   I get
   a coredump :(
  ... snip 
 
  Try zeroing out the disk label with something like:
 
  dd if=/dev/zero of=/dev/rdsk/c?t?d?p0  bs=1024k count=1024

 Do you expect a 1 GB disk label?

No.  :)

Al Hopper  Logical Approach Inc, Plano, TX.  [EMAIL PROTECTED]
   Voice: 972.379.2133 Fax: 972.379.2134  Timezone: US CDT
OpenSolaris.Org Community Advisory Board (CAB) Member - Apr 2005
 OpenSolaris Governing Board (OGB) Member - Feb 2006
___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Krzys


Does not work :(

dd if=/dev/zero of=/dev/rdsk/c3t6d0s0 bs=1024k count=1024
dd: opening `/dev/rdsk/c3t6d0s0': I/O error

That is so strange... it seems like I lost another disk... I will try to reboot 
and see what I get, but I guess I need to order another disk then and give it a 
try...


Chris





On Tue, 5 Dec 2006, Al Hopper wrote:


On Tue, 5 Dec 2006, Krzys wrote:


Thanks, ah another wird thing is that when I run format on that frive I get
a coredump :(

... snip 

Try zeroing out the disk label with something like:

dd if=/dev/zero of=/dev/rdsk/c?t?d?p0  bs=1024k count=1024

Regards,

Al Hopper  Logical Approach Inc, Plano, TX.  [EMAIL PROTECTED]
  Voice: 972.379.2133 Fax: 972.379.2134  Timezone: US CDT
OpenSolaris.Org Community Advisory Board (CAB) Member - Apr 2005
OpenSolaris Governing Board (OGB) Member - Feb 2006


!DSPAM:122,4575a7731650371292!


___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Krzys


Ok, so here is an update

I did restart my sysyte, I power it off and power it on. Here is screen capture 
of my boot. I certainly do have some hard drive issues and will need to take a 
look at them... But I got my disk back visible to the system and zfs is doing 
resilvering again


Rebooting with command: boot
Boot device: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a  
File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: chrysek
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 6 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Error for Command: read(10)Error Level: Retryable
Requested Block: 286732066 Error Block: 286732066
Vendor: SEAGATESerial Number: 3HY14PVS
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 0x0, FRU: 
0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 3 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd23):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623842 Error Block: 283623842
Vendor: SEAGATESerial Number: 3HY8HS7L
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 0x0, FRU: 
0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 5 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd25):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623458 Error Block: 283623458
Vendor: SEAGATESerial Number: 3HY0LF18
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 0x0, FRU: 
0x2

/kernel/drv/sparcv9/zpool symbol avl_add multiply defined
/kernel/drv/sparcv9/zpool symbol assfail3 multiply defined
WARNING: kstat_create('unix', 0, 'dmu_buf_impl_t'): namespace collision
mypool2/d3 uncorrectable error
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is logging.

chrysek console login: VERITAS SCSA Generic Revision: 3.5c
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp missing
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp missing
Dec  5 13:01:46 chrysek VERITAS: No proxy found.
Dec  5 13:01:52 chrysek vmd[546]: ready for connections
Dec  5 13:01:53 chrysek VERITAS: No proxy found.
Dec  5 13:01:54 chrysek VERITAS: No proxy found.
Dec  5 13:02:00 chrysek VERITAS: No proxy found.
Dec  5 13:02:01 chrysek VERITAS: No proxy found.
Dec  5 13:02:03 chrysek VERITAS: No proxy found.
starting NetWorker daemons:
 nsrexecd
 lgtolmd
Dec  5 13:02:20 chrysek CNS Transport[841]: cctransport started
Dec  5 13:02:48 chrysek webmin[1353]: Webmin starting
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED] (glm2):
Dec  5 13:19:07 chrysek Target 6 disabled wide SCSI mode
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED] (glm2):
Dec  5 13:19:07 chrysek Target 6 reverting to async. mode
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Dec  5 13:19:07 chrysek Error for Command: write(10)   Error 
Level: Retryable
Dec  5 13:19:07 chrysek scsi:   Requested Block: 137163259 Error 
Block: 137163259
Dec  5 13:19:07 chrysek scsi:   Vendor: SEAGATE 
Serial Number: 3HY14PVS

Dec  5 13:19:07 chrysek scsi:   Sense Key: Aborted Command
Dec  5 13:19:07 chrysek scsi:   ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 
0x3



but now when I do zpool status -v
  pool: mypool
 state: ONLINE
 scrub: none requested
config:

NAMESTATE READ WRITE CKSUM
mypool  ONLINE   0 0 0
  mirrorONLINE   0 0 0
c1t2d0  ONLINE   0 0 0
c1t3d0  ONLINE   0 0 0

errors: No known data errors

  pool: mypool2
 state: DEGRADED
status: One or more devices is currently being resilvered.  The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
 scrub: resilver in progress, 4.40% done, 11h40m to go

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Richard Elling


This looks more like a cabling or connector problem.  When that happens
you should see parity errors and transfer rate negotiations.
 -- richard

Krzys wrote:

Ok, so here is an update

I did restart my sysyte, I power it off and power it on. Here is screen 
capture of my boot. I certainly do have some hard drive issues and will 
need to take a look at them... But I got my disk back visible to the 
system and zfs is doing resilvering again


Rebooting with command: boot
Boot device: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a  
File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: chrysek
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 6 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Error for Command: read(10)Error Level: Retryable
Requested Block: 286732066 Error Block: 286732066
Vendor: SEAGATESerial Number: 3HY14PVS
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 
0x0, FRU: 0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 3 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd23):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623842 Error Block: 283623842
Vendor: SEAGATESerial Number: 3HY8HS7L
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 
0x0, FRU: 0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 5 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd25):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623458 Error Block: 283623458
Vendor: SEAGATESerial Number: 3HY0LF18
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 
0x0, FRU: 0x2

/kernel/drv/sparcv9/zpool symbol avl_add multiply defined
/kernel/drv/sparcv9/zpool symbol assfail3 multiply defined
WARNING: kstat_create('unix', 0, 'dmu_buf_impl_t'): namespace collision
mypool2/d3 uncorrectable error
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is logging.

chrysek console login: VERITAS SCSA Generic Revision: 3.5c
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp 
missing
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp 
missing

Dec  5 13:01:46 chrysek VERITAS: No proxy found.
Dec  5 13:01:52 chrysek vmd[546]: ready for connections
Dec  5 13:01:53 chrysek VERITAS: No proxy found.
Dec  5 13:01:54 chrysek VERITAS: No proxy found.
Dec  5 13:02:00 chrysek VERITAS: No proxy found.
Dec  5 13:02:01 chrysek VERITAS: No proxy found.
Dec  5 13:02:03 chrysek VERITAS: No proxy found.
starting NetWorker daemons:
 nsrexecd
 lgtolmd
Dec  5 13:02:20 chrysek CNS Transport[841]: cctransport started
Dec  5 13:02:48 chrysek webmin[1353]: Webmin starting
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED] (glm2):
Dec  5 13:19:07 chrysek Target 6 disabled wide SCSI mode
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED] (glm2):
Dec  5 13:19:07 chrysek Target 6 reverting to async. mode
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Dec  5 13:19:07 chrysek Error for Command: 
write(10)   Error Level: Retryable
Dec  5 13:19:07 chrysek scsi:   Requested Block: 
137163259 Error Block: 137163259

Dec  5 13:19:07 chrysek scsi:   Vendor: SEAGATE Serial Number: 3HY14PVS
Dec  5 13:19:07 chrysek scsi:   Sense Key: Aborted Command
Dec  5 13:19:07 chrysek scsi:   ASC: 0x47 (scsi parity error), ASCQ: 
0x0, FRU: 0x3



but now when I do zpool status -v
  pool: mypool
 state: ONLINE
 scrub: none requested
config:

NAMESTATE READ WRITE CKSUM
mypool  ONLINE   0 0 0
  mirrorONLINE   0 0 0
c1t2d0  ONLINE   0 0 0
c1t3d0  ONLINE   0 0 0

errors: No known data errors

  pool: mypool2
 state: DEGRADED
status: One or more devices is currently being resilvered.  The pool will

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Richard Elling


BTW, there is a way to check what the SCSI negotiations resolved to.
I wrote about it once in a BluePrint
http://www.sun.com/blueprints/0500/sysperfnc.pdf
See page 11
 -- richard

Richard Elling wrote:

This looks more like a cabling or connector problem.  When that happens
you should see parity errors and transfer rate negotiations.
 -- richard

Krzys wrote:

Ok, so here is an update

I did restart my sysyte, I power it off and power it on. Here is 
screen capture of my boot. I certainly do have some hard drive issues 
and will need to take a look at them... But I got my disk back visible 
to the system and zfs is doing resilvering again


Rebooting with command: boot
Boot device: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a  
File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: chrysek
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 6 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Error for Command: read(10)Error Level: Retryable
Requested Block: 286732066 Error Block: 286732066
Vendor: SEAGATESerial Number: 
3HY14PVS

Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 
0x0, FRU: 0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 3 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd23):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623842 Error Block: 283623842
Vendor: SEAGATESerial Number: 
3HY8HS7L

Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 
0x0, FRU: 0x2

WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED] (glm2):
Target 5 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd25):
Error for Command: read(10)Error Level: Retryable
Requested Block: 283623458 Error Block: 283623458
Vendor: SEAGATESerial Number: 
3HY0LF18

Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ: 
0x0, FRU: 0x2

/kernel/drv/sparcv9/zpool symbol avl_add multiply defined
/kernel/drv/sparcv9/zpool symbol assfail3 multiply defined
WARNING: kstat_create('unix', 0, 'dmu_buf_impl_t'): namespace collision
mypool2/d3 uncorrectable error
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is logging.

chrysek console login: VERITAS SCSA Generic Revision: 3.5c
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp 
missing
Dec  5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp 
missing

Dec  5 13:01:46 chrysek VERITAS: No proxy found.
Dec  5 13:01:52 chrysek vmd[546]: ready for connections
Dec  5 13:01:53 chrysek VERITAS: No proxy found.
Dec  5 13:01:54 chrysek VERITAS: No proxy found.
Dec  5 13:02:00 chrysek VERITAS: No proxy found.
Dec  5 13:02:01 chrysek VERITAS: No proxy found.
Dec  5 13:02:03 chrysek VERITAS: No proxy found.
starting NetWorker daemons:
 nsrexecd
 lgtolmd
Dec  5 13:02:20 chrysek CNS Transport[841]: cctransport started
Dec  5 13:02:48 chrysek webmin[1353]: Webmin starting
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED] (glm2):
Dec  5 13:19:07 chrysek Target 6 disabled wide SCSI mode
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL 
PROTECTED] (glm2):
Dec  5 13:19:07 chrysek Target 6 reverting to async. mode
Dec  5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],60/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 
(sd5):
Dec  5 13:19:07 chrysek Error for Command: 
write(10)   Error Level: Retryable
Dec  5 13:19:07 chrysek scsi:   Requested Block: 
137163259 Error Block: 137163259

Dec  5 13:19:07 chrysek scsi:   Vendor: SEAGATE Serial Number: 3HY14PVS
Dec  5 13:19:07 chrysek scsi:   Sense Key: Aborted Command
Dec  5 13:19:07 chrysek scsi:   ASC: 0x47 (scsi parity error), ASCQ: 
0x0, FRU: 0x3



but now when I do zpool status -v
  pool: mypool
 state: ONLINE
 scrub: none requested
config:

NAMESTATE READ WRITE CKSUM
mypool  ONLINE   0 0 0
  mirrorONLINE   0 0 0

Re: [zfs-discuss] weird thing with zfs

2006-12-05 Thread Nathan Kroenert

Hm. If the disk has no label, why would it have an s0?

Or, did you mean p0?

Nathan.


On Wed, 2006-12-06 at 04:45, Krzys wrote:
 Does not work :(
 
 dd if=/dev/zero of=/dev/rdsk/c3t6d0s0 bs=1024k count=1024
 dd: opening `/dev/rdsk/c3t6d0s0': I/O error
 
 That is so strange... it seems like I lost another disk... I will try to 
 reboot 
 and see what I get, but I guess I need to order another disk then and give it 
 a 
 try...
 
 Chris
 
 
 
 
 
 On Tue, 5 Dec 2006, Al Hopper wrote:
 
  On Tue, 5 Dec 2006, Krzys wrote:
 
  Thanks, ah another wird thing is that when I run format on that frive 
  I get
  a coredump :(
  ... snip 
 
  Try zeroing out the disk label with something like:
 
  dd if=/dev/zero of=/dev/rdsk/c?t?d?p0  bs=1024k count=1024
 
  Regards,
 
  Al Hopper  Logical Approach Inc, Plano, TX.  [EMAIL PROTECTED]
Voice: 972.379.2133 Fax: 972.379.2134  Timezone: US CDT
  OpenSolaris.Org Community Advisory Board (CAB) Member - Apr 2005
  OpenSolaris Governing Board (OGB) Member - Feb 2006
 
 
  !DSPAM:122,4575a7731650371292!
 
 ___
 zfs-discuss mailing list
 zfs-discuss@opensolaris.org
 http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
-- 

___
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Re: [zfs-discuss] weird thing with zfs

[zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

Re: [zfs-discuss] weird thing with zfs

13 matches

Site Navigation

Mail list logo

Footer information