Hi Tengfei,
Related to MAX_NUMCELLS, LIM_NUMCELLSUSED_HIGH and LIM_NUMCELLSUSED_LOW
need to be revisited.
In Section 5.1., these values are used in the following way:
The counters are used as follows:
1. Both NumCellsElapsed and NumCellsUsed are initialized to 0 when
the node b
Thank you, Tengfei.
TC: we only mentioned 6P SIGNAL, because that's 6P leaves it to scheduling
function, which must mention how it is used.
I understand that Section 6 corresponds to the following point mentioned
Section 4.2 of RFC 8480:
rfc8480> The specification for an SF
rfc8480> ...
rf
Hi Yatch,
Thanks a lot for the comments! I will response inline!
On Tue, Nov 26, 2019 at 3:21 PM Yasuyuki Tanaka
wrote:
> Hi all,
>
> I reviewed draft-ietf-6tisch-msf-08. Here are my comments;
>
> * [clarification] Section 1
>
> draft> the 6 steps described in Section 4. The end state of the j
Hi all,
I reviewed draft-ietf-6tisch-msf-08. Here are my comments;
* [clarification] Section 1
draft> the 6 steps described in Section 4. The end state of the join
draft> process is that the node is synchronized to the network, has
draft> mutually authenticated to the network, has identified a