rc using backquote to parse strings, e.g:
hugo% s=`{echo a b c}
hugo% echo $#s $s(1)
3 a
This is fine
hugo% s=`{echo 'a b' c}
hugo% echo $#s $s(1)
3 a
This is also fine, a b and c are just two fields when they
enter echo but they leave the appear
That behaviour is what I would expect. rc splits text in `{} according
to $ifs, which is usually space, tab, and newline. It doesn't treat any
characters special, including quotes.
Am 26.11.2014 um 14:02 schrieb Steve Simon:
rc using backquote to parse strings, e.g:
hugo% s=`{echo a b c}
This is also fine, a b and c are just two fields when they
enter echo but they leave the appear to be 3 seperate words.
hugo% s=`{echo '''a b''' c}
hugo% echo $#s $s(1)
3 'a
This is disappointing, I was hoping that I would get
2 args and the first would be 'a b' (quotes
Hi dante!
I copied your piclone script in Plan 9 but even though I've been
digging I can't find out how to get the name of the SD card attached
to the pi on which I want to clone my setup on. So, easily put, what
command do I use to get to know that? So I wonder how to get the
device name of the
Hi Mats,
Look in the /dev directory (ls /dev).
If you only have the boot device and an additional USB drive (in your
case, an USB-to-SD adapter),
the boot device shall be /dev/sdM0 and
the USB/SD device shall be /dev/sdU0.0
Kind Regards,
Dante
On 26.11.2014 18:16, Mats Olsson wrote:
Hi
Hi!
So piclone sdU0.0 would be right? I have the script in
/usr/glenda/home does that matter?
Yours Sincerely,
Mats
2014-11-26 18:41 GMT+01:00, Dante subscripti...@posteo.eu:
Hi Mats,
Look in the /dev directory (ls /dev).
If you only have the boot device and an additional USB drive (in
Hi dante!
In answer to my own question: DONE. Thanks a lot!
Kind Greetings,
Mats
2014-11-26 18:56 GMT+01:00, Mats Olsson plan9@gmail.com:
Hi!
So piclone sdU0.0 would be right? I have the script in
/usr/glenda/home does that matter?
Yours Sincerely,
Mats
2014-11-26 18:41 GMT+01:00,
Cool, first tester :-).
Thanks, Mats!
-- Dante
On 26.11.2014 19:16, Mats Olsson wrote:
Hi dante!
In answer to my own question: DONE. Thanks a lot!
Kind Greetings,
Mats
2014-11-26 18:56 GMT+01:00, Mats Olsson plan9@gmail.com:
Hi!
So piclone sdU0.0 would be right? I have the script in
