Lyndon,
Did you get it to run on OpenBSD?
J.
On Wed, Feb 24, 2021 at 5:49 AM Steffen Nurpmeso wrote:
> Lyndon Nerenberg (VE7TFX/VE6BBM) wrote in
> <0903a00d50966...@orthanc.ca>:
> |Steffen Nurpmeso writes:
> |> It can even be as small as
> |>
> |> #?0|kent:unix-hist$ du -sh .
> |> 17
Thank you David for the binaries.
On Mon, Oct 7, 2019 at 1:38 AM Lucio De Re wrote:
> In fact, I'd forgotten I'd had an exchange with a Go developer (I wish
> I could remember who) precisely over that "bootstrap" issue. Go1.4.3
> needs a small enhancement, I forget from which target onwards beca
I've been using it with Klong ( http://t3x.org/klong/index.html )
lately which supports plan9 natively.
On Sat, Jun 16, 2018 at 6:39 AM, Ole-Hjalmar Kristensen
wrote:
> I cannot really say I am using Plan9 for anything serious, although I have
> both Plan9 and 9Front running on a couple of old la
This comes as a shock to me. Uriel was a great guy; we worked together
on a few things, his deep understanding of very complex mechanisms
always amazed me.
J.
I use a "Vonets USB WiFi Bridge vap11g" I found on ebay for less than
$10, I wrote a little driver to have it set its channel and ssid.
I didn't have any documentation, so I snooped the usb traffic bridged
to a windows instance running in virtualbox.
Jerome
On Wed, Mar 21, 2012 at 9:10 AM, Stanl
9fans,
> VESA requires realmode.
Thank you Erik, it was an oversight from my part. I was able to start rio
in 1024x768x8 and 1280x1024x8 using the VESA driver, however, the keyboard
was not working, and the pointer had no cursor.
Please note, that, while the pointer had no cursor, the mouse was
9fans,
I'm using a VIA SN18000G booting off a fileserver, everything seems
to be working relatively well, however it seems that the video card is not
recognized. My 'pci -bv' and 'vga -lvp' are as follows:
cpu% pci -bv
0.0.5: --- 08.00.20 1106/5364 0
VIA Technology
0.15.0: disk 01.01.
As it appears, the (net)boot configuration, meaning the 'plan9.ini'
located in /cfg/pxe/, where '' is the netbooted
host ethernet address, was missing nvram parameters, preventing the cpu
kernel (9pccpu) to proceed with the boot sequence.
If this parameter (nvram or nvr) is
Hi,
I am (net)booting a Qemu instance from a Plan 9 fileserver named
colossus(192.168.1.40) running cwfs, an authserver, named
cerberus(192.168.1.50) is also present in the same domain.
The client is named cpu-003(192.168.1.33), it retrieves, via dhcp its
plan9.ini, which is as such:
bootfile=
Bob,
> mk: don't know how to make '/386/bin/fossil/fossil' in directory
> /sys/src/9/pc
touch /386/bin/fossil/fossil then you can mk 'CONF=pcf' if you want.
Hope this helps,
Jerome Ibanes
> what i know is
> a) it build just fine on my system, but i don't use pull.
> b) if for some xyzw mk requires xyzw.8 and there's no xyzw.$x
> so that there's a mk rule like so "%.8: %.$x", i get the following
> error message
> ; mk xyzw.8
> mk: no recipe to make 'xyzw.8' in directory /
9,
>> mk: no recipe to make 'pptpd.8' in directory /sys/src/cmd/ip
> does /sys/src/cmd/ip/pptpd.c exist? if not, there must be an
> error in the pull database on sources. you can copy it
> by hand with
> 9fs sources && cp -x /n/sources/plan9/sys/src/cmd/ip/pptpd.c
> /sys/src/cmd/ip/
> Eri
9,
>> mk: no recipe to make 'pptpd.8' in directory /sys/src/cmd/ip
> does /sys/src/cmd/ip/pptpd.c exist? if not, there must be an
> error in the pull database on sources. you can copy it
> by hand with
> 9fs sources && cp -x /n/sources/plan9/sys/src/cmd/ip/pptpd.c
> /sys/src/cmd/ip/
Erik
9,
>> Something not quite right with my system??? It's from the plan9 iso
>> dated June 26th..
I'm having the same exact issue with a July 19th iso.
>> this would be expected due to the pull which sets the mtimes of
>> new files to be older than the .8s. try "mk clean" before proceeding.
> So,
interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
Sincerely,
Jerome Ibanes
>> [...]
>> pcirouting: South bridge 1106, 3177 not found
>> { 0x1106, 0x3177, viaget, viaset }, /* Viatech VT8235 */
>> [...]
> could you send the output of linux lspci -vvn?
The output of linux's lspci -vvn is attached to this message, thank you
for looking into this.
Sincerely,
Jerome I
outh bridge doesn't
help, could anyone think about any other way to run plan 9 on the SunPCI?
Sincerely,
Jerome Ibanes
References:
(1) SunPCI card: http://www.sun.com/desktop/products/sunpcipro/
(2) Sun Blade: http://www.sun.com/desktop/workstation/sunblade150/
(3) http://plan9.bell-lab
17 matches
Mail list logo
