Hello
Recently I've been getting the following errors during backup:
2003\02\11 02:36:26 ANE4023E (Session: 3219, Node: SPNT305) Error
processing '\\spnt305\c$': file input/output error
The backup seems to run fine.
The clients are Windows 2000 and the BA client is 4.2.1.20. We are
Hi TSMers,
We need to send some tapes (3590E) offsite, outside the country, and there is a good
possibility that the tapes will undergo X-ray checks while en-route. Can anybody
advice whether we can take any precautions to safeguard against accidental damage of
the tapes ?
Any help would be
Hi Mr Chandrasekhar,
You could probably use something like :
Select blah ... where cast((scheduled_start-current_timestamp)hours as
decimal) 24
In this case you can replace hours by minutes or even seconds
or select blah ... where dayname(scheduled_start) ='Tuesday'
Hope it helped !
Arnaud
Hello
I just want to know of its possible to run two TSM servers on the same
machine.
We are running AIX 4.3.3 and TSM 3.7
Regards
Thando Ndaba
SAPO
This e-mail is sent in terms of the following policy/disclaimer. Click on
this link http://www.sapo.co.za/mail_disclaimer.htm to read full
Hi All
I'm getting the following from a new client that is running journaling.
TSM Client is 5.1.5.2, server is 5.1.5.4.
10-02-2002 09:20:05 NpOpen : Named pipe error connecting to server
WaitOnPipe failed.
NpOpen: call failed with return code:121 pipe name \\.\pipe\jnl
I see there was a
Joni,
Changing the serialization of the backup copy group will have no impact to
current backup data.
Your backups may go slightly faster if you have had a lot of retries before.
Be aware of two things though.
1) There may still be certain files which cannot be opened for backup.
2) Depends on the
Niklas,
Do a checkdisk on the client. Maybe there are errors on it.
Maria Ilieva
---Original Message---
From: ADSM: Dist Stor Manager
Date: 11 Ôåâðóàðè 2003 10:10:48
To: [EMAIL PROTECTED]
Subject: ANE4034E
Hello
Recently I've been getting the following errors
Hi
I believe Paul is right, but if you want to check for data in copypool, and
not in primary pool, do a restore stgpool primarypool preview=yes. It
should tell you if there are data in the copypool which are not in
primarypool. It also tells you which tapes you need to really perform the
restore
None of these. Install the latest one (D0IF_295) that fixes some nasty
problems especially if you are using ES-1000s. D0IF_26E regresses a fix
that the previous firware had for ES-1000s. There are also a lot fixes
related to bad tapes. There is a change to improve cleaning cycle needs and
to
Paul, Geirr,
Many thanks for your precious help and explanations. What I was triying
to achieve was to build a query that would give me an idea of the
approximative remaining time before my backup stgpool operations would
finish. I thought I could find how much data remained to be copied by
This is why it took soo long for them to actually figure out what the
problem was. As it turns out, if the session did not exceed the coded
server timeout the problem did not show up on any release of the client or
the server. It is when it went over. In order to fix the problem, the
client
Hi all, I4m having some troubles with tsm in directory name level. I have
two directories to backup in TSM. Both, have a blank space in the middle of
the name like: c:\Tomcat 4.1\
I4ve put on Scheduler c:\Tomcat*4.1\ c:\Tomcat?4.1\ quotes like c:\Tomcat
4.1\ and tried c:\Tomcat 4.1\ and some other
Don't have good news other to say that I still see the message at 5.1.5.9 of
the client talking to 5.1.5.4 server. Haven't had time to call the support
center yet. Working a different call with the support center related to
cleanup backupgroups on one of the servers that just went to 5.1.5.4!
We need to send some tapes (3590E) offsite, outside the country, and
there is a good possibility that the tapes will undergo X-ray checks
while en-route. Can anybody advice whether we can take any precautions
to safeguard against accidental damage of the tapes ?
X-rays affect film, not magnetic
Hi all, I4m having some troubles with tsm in directory name level. I have
two directories to backup in TSM. Both, have a blank space in the middle of
the name like: c:\Tomcat 4.1\
I4ve put on Scheduler c:\Tomcat*4.1\ c:\Tomcat?4.1\ quotes like c:\Tomcat
4.1\ and tried c:\Tomcat 4.1\ and some other
Another point to consider...
If they are going by air, they will get very cold. At their destination
they may be subject to high levels of condensation, so ensure that they
acclimatise (at least 4 hours?)in a sealed container if possible and don't
put them into a tape drive until they are at
Hello All:
Our TSM Server Policy domain set Backup only version = 60 (Default),but i
try reset server time to ten year after
restart TSM server and run accept date and expire inventory,then check
the client only version data exists!!
why not? how to expire only version data.
Thanks
Tony W
Paul-- where are you getting your code? It's not on the ftp site
ftp://service.boulder.ibm.com/storage/3590/code3590/
Is there another place to look?
thanks
lisa
- Forwarded by Lisa Cabanas/SC/MODOT on 02/11/2003 07:22 AM -
I think that the only version = 60 means the last deleted version = 60.
Active versions will not be expired. Only inactive ones. So make the only
version inactive (exclude it from the back-up / delete it from the client).
Next back-up the version will be marked inactive and it will over time be
yes. But they will be the same version.
-Original Message-
From: Thando Ndaba [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, February 11, 2003 2:21 AM
To: [EMAIL PROTECTED]
Subject:
Hello
I just want to know of its possible to run two TSM servers on the same
machine.
We are running
Hi,
I have installed TSM 5.1.6 Server on W2k, and after configuring the
library and the drives and after checking in some tapes succesfully,
Submitting an audit library command I keep getting this error:
02/11/2003 09:37:08 ANR8304E Time out error on drive MT0.12.0.3
(mt0.12.0.3)
This error occurs when the journal daemon process attempts to send a
response on a named pipe provided by
a backup client process and the pipe no longer exists or isn't valid.
This can happen if the backup process/session ends or closes the pipe
before the journal daemon
sends or is finished
Hi all, I4m having some troubles with tsm in directory name level. I have
two directories to backup in TSM. Both, have a blank space in the middle of
the name like: c:\Tomcat 4.1\
I4ve put on Scheduler c:\Tomcat*4.1\ c:\Tomcat?4.1\ quotes like c:\Tomcat
4.1\ and tried c:\Tomcat 4.1\ and some
Pete,
What about the message - 02/11/2003 04:02:14 NpPeek: No data. ?
We are also seeing this daily in dsmserror on the same clients. Is there a
connection?
Curt Magura
Lockheed Martin EIS
Orlando, Fla.
321-235-1203
-Original Message-
From: Pete Tanenhaus [mailto:[EMAIL PROTECTED]]
Hi all,
I am having difculty in moving empty volumes to scratch pool
1. I tried del volume command i am getting the following error
ANR1425W Scratch volume VOL109 is empty but will not be
deleted - volume state is mountablenotinlib
How can i move the empty volumes to
Hello advance:
Thanks for your replaied.
If the client node must backup as /tmp directory,but file's name have
changed every seconds.Can't the TSM backup file expire?
could you give me a hand?
Thanks
Tony W
I think that the only version = 60 means the last deleted version = 60.
Active versions
Is there a Resuse Delay
-Original Message-
From: Kempadasiah, Umesh [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 11, 2003 8:53 AM
To: [EMAIL PROTECTED]
Subject: unable to move empty volumes to scratch
Hi all,
I am having difculty in moving empty volumes to scratch pool
1. I
Can you give us a q vol vol109 f=d? It seems that this volume hasn't been
checked in the library correctly. The volume state says mountable but NOT
in library.
-Oorspronkelijk bericht-
Van: Kempadasiah, Umesh [mailto:[EMAIL PROTECTED]]
Verzonden: dinsdag 11 februari 2003 15:53
Aan: [EMAIL
I have checked this into library with status as private if i query the libvol it
shows me the volume
Thanks and regards
Umesh K
-Original Message-
From: Karel Bos [mailto:[EMAIL PROTECTED]]
Sent: Tue 2/11/2003 10:11 AM
To: [EMAIL PROTECTED]
Np errors in the backup client errorlog indicate the opposite condition,
that is the backup client
is trying to read a response sent from the journal daemon which isn't
available at the moment
the read is being done.
This error can happen if the journal daemon ends (obviously a problem) or
(I
Reuse delay is set to 0
-Original Message-
From: Hart, Charles [mailto:[EMAIL PROTECTED]]
Sent: Tue 2/11/2003 9:58 AM
To: [EMAIL PROTECTED]
Cc:
Subject: Re: unable to move empty volumes to scratch
Is there a
ANR1425W Scratch volume VOL109 is empty but will not be
deleted - volume state is mountablenotinlib
You may have DRM procedures, or have done a Move Media, to
manage the volume in a special way. Your site procedures should
prescribe the manner in which the volume returns to the library,
Hi Umesh,
Taken from TSM help :
ANR1425W Scratch volume volume name is empty but will not be deleted -
volume state is mountablenotinlib.
Explanation: The named scratch volume is empty but will not be deleted
at
this time because the state of the volume is MOUNTABLENOTINLIB.
System Action: The
Hi,
try
move media vol109 stgpool=storage_pool_name wherestate=mountablenotinlib
You can obtain more info about the command by typing 'help move media' into
an admin command line.
Mit freundlichen Grüßen,
Met vriendelijke groeten,
With best regards,
Bien amicalement,
CU/2,
Tony,
Are you talking about Retain Only Version that is in the
copygroup setting?
You can change that by issuing:
update copygroup domain name policy set name class name
RETOnly=# this is days
I think that you can skip this step. I always activate the
policy when I make changes in the policy or
I tried the move media command , but it says 0 volume found
Here is the list of volumes in the stgpool and in the library .. let me know where the
problem lies
q vol stgpool=arch-pool
Volume Name Storage Device EstimatedPct Volume
Pool
Hi,
I have exactly the same problem except that I have TSM server on AIX 5.1.
It is very strange, because it happens randomly always during unmounting
the tape.
It is always the same drive - /dev/rmt0.
Tape remains in the drive. I can unload tape using operator panel without
any problem. But if I
Does somebody know, what does error message : Operation failed with errno
79: Connection refused
mean? Where I can find information about this error number. ...
Know thy operating system. errno is the Unix standard error number, as
enumerated in header file /usr/include/sys/errno.h and described
Umesh,
Just try to checkout the volumes out of the library with option force=yes.
Then audit the library and checkin as scratch.
I did this on my Library too.
Balanand Pinni
-Original Message-
From: Kempadasiah, Umesh [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 11, 2003 10:09 AM
Pete, think you said it all with the statement below! Very confusing in the
current state to decide if there is a problem or not.
That being said, I think development (myself) needs to look at the np
error logging on both sides and try to eliminate logging messages which
aren't really errors,
Someone here has gone off and created their own cmd file that TSM launches
to do an archive. I can't seem to find anything in the help file on these
variables. Maybe someone more familiar with variables can please tell me if
this will work. From what I can tell looking at the return codes it looks
Hello,
do you use the Disaster Recovery Manager?
And what do the q vol vol109 f=d and q media commands give as output?
Did you try the delete vol vol109 command with the discarddata=yes
parameter?
Mit freundlichen Grüßen,
Met vriendelijke groeten,
With best regards,
Bien amicalement,
CU/2,
If you are referring to the ARCHIVE_DIR and ARCHIVE_INCLUDES variables,
you won't find anything in the TSM doc about these. These are arbitrary
environment variables created by your user.
After the environment variables were created, was the scheduler restarted
so that it would pick them up?
I know this has been covered before but I can't find it. Does anyone have a
sql query that will tell me what tapes a particular nodes particular archive
is on?
Thanks in advance,
Mark Remeta
Confidentiality Note: The information transmitted is intended only for the
person or entity to whom or
-Original Message-
From: Remeta, Mark [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 11, 2003 9:14 AM
To: [EMAIL PROTECTED]
Subject: Tape question
I know this has been covered before but I can't find it. Does
anyone have a
sql query that will tell me what tapes a
Mark
Try this one name of script vol_node: run vol_node 'SYSTEM_1' 'SCA_PC'
select volume_name, stgpool_name, filespace_name from volumeusage where
node_name='$1' and stgpool_name='$2'
Regards Robert Ouzen
Haifa University
Israel
-Original Message-
From: Remeta, Mark [mailto:[EMAIL
Mark,
Thanks for the reply. I was talking with the DBA for the client in question.
It looks like he requires 130gb and the diskpool's estimated capacity in
MB's is 107668.0
It sounds like we are going to have to buy more disk.
Tommy
- Original Message -
From: Darby, Mark [EMAIL
Hi,
i tried a variation of your SQL, viz. select node_name, filespace_name from
volumeusage where volume_name='' - i ran this query on a volume containing objects
from a remote server.
it worked fine, but before giving the result, it came back with a TSM prompt saying :
This SQL query
This works good however I only want the tapes from the last archive I ran
which was the first of January. This query gives me all the volumes from the
beginning of time that have that nodes filespace in it.. clear as mud?
-Original Message-
From: Peter Ford [mailto:[EMAIL PROTECTED]]
Pete,
Since we've been trading notes on the Journal Service this morning once last
question please. Is there a documented limit to the number of drives that
can added to the Journal service? I can't seem to get more than 10-11 drives
configured. After that the Journal service will fail to start.
The limit is 255 but apar IC35394 was opened against a problem which causes
the journal daemon to crash
when configured with more than 15 drives (15 is ok, 16 or more crashes).
The fix for this should be included in the next ptf but you might want to
check with support to be sure.
Hope this
Thank you sirgood info!
I wish I could get all of the drives but I'll take 15 drivesI'll give
support a call sometime in the next few days.
Curt Magura
Lockheed Martin EIS
Orlando, Fla.
321-235-1203
-Original Message-
From: Pete Tanenhaus [mailto:[EMAIL PROTECTED]]
Sent:
I understand the concern, the point I was trying to make was that in some
cases it's difficult to determine
if particular return codes merit something being written to the errorlog.
In the case of a named pipe error (on either the journal daemon or the
backup client) it isn't easy to
determine
Hi,
Yes, you can suppress the prompt.
Just do: dsmadmc -noconfirm
Allan Hansen
Munk IT A/S
Egelundsvej 18
5260 Odense S
Denmark
Ubhaykar, Nitin [EMAIL PROTECTED]
Sendt af: ADSM: Dist Stor Manager [EMAIL PROTECTED]
11-02-2003 18:43
Besvar venligst til ADSM: Dist Stor Manager
Til:
ok I think I have it figured out... here's what I got
select volumeusage.volume_name from volumeusage,volumes where
volumeusage.node_name='nodename' and
volumeusage.filespace_name='filespacename' and
volumeusage.stgpool_name='stgpoolname' and
volumes.last_write_date'-mm-dd' and
Hi All
First off :
TSM Server 5.1.5.4 on solaris
TSM Client on Windows 2000 5.1.5.9
ITSM for mail 5.1.5.0
I installed tsm client and Mail client and everything went fine. Registered both the
OS client and the Mail client. When I run domdsmc q adsmserv I get a response from
my tsm server. when
I had this same problem it turned out to be McAfee Groupshield keeping TDP
from connecting to Domino.
We are using Groupshield 5.2 and we had to add DOMDSMC and DOMDSM to the
application exclusion list in the server settings database for Groupshield
Greg Redell
Great-West Life Annuity Insurance
Hi All,
Problem is like this,I dont know whether it is a
problem or a bug,specially when TSM installed on
solaris machine,library is 3583.
Problem 1)
I have one node register in one tsm server and its
data is in two volume, T00032 and T00044.
but, when I did q vol, it shows est. capacity(MB) 0.0
I have a client with a missing files problem.
Around midnight Jan 25/26, TSM did an incremental on a WinNT box. All three
file systems show as completed in q fi f=d. Some time thereafter, but
before 1/28, the harddrive went south. On 1/29 directories from c$ were
restored on a new machine.
I have seen some messages here recently about 3583 drive errors.
I have a 3584 with (8) Fibre drives going through McData switches.
with TSM Server 4.2.2.10 on AIX 4.3.3 ML 10 and Atape sdriver
7.1.1.0. 3584 library code 2460 and drive code 25D4.
Have had 3584 about a year. Have had
hello everyone!
I'm using TSM API to write a program, but after I make a
backupset(the files in TSM was archived by using APIs and
the backupset was generated by using TSM server command
gene backupset), I found it can not be restored by TSM
Client.
And I found TSM client help '57'
61 matches
Mail list logo
