I am new to Tivoli and am having problems trying to get scheduling
working for the TDP side of things via the TSM scheduler. I have so
far found out that I need to have 3 stanzas in the dsm.sys file - 1
for normal backups, 1 for Oracle and 1 for the scheduler for Oracle -
and that I need to run a
Use help query copygroup
regards
Michael
-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Liu,
Haifeng
Gesendet: Freitag, 4. März 2005 07:50
An: ADSM-L@VM.MARIST.EDU
Betreff: how can i query archive group just like query copygroup
You can use the UP and DOWN Arrows to repeat the last command
regards
Michael
-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Liu,
Haifeng
Gesendet: Freitag, 4. März 2005 07:31
An: ADSM-L@VM.MARIST.EDU
Betreff: how can I repeat the last
thanks
Best regards,
Steven
-Original Message-
From: Michael Garnebode [mailto:[EMAIL PROTECTED]
Sent: Friday, March 04, 2005 4:22 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] AW: how can I repeat the last command?
You can use the UP and DOWN Arrows to repeat the last command
regards
Hello all
I have next situation:
Reclamation of tapes gets on a backup window and backup is tightened at some
o'clock pending clearings of resources. What it is possible to make, that the
reclamation did not break the schedule backup? Whether there are any
recommendations IBM in occasion of
Mark Tindall wrote:
I am new to Tivoli and am having problems trying to get scheduling
working for the TDP side of things via the TSM scheduler. I have so
far found out that I need to have 3 stanzas in the dsm.sys file - 1
for normal backups, 1 for Oracle and 1 for the scheduler for Oracle -
and
Hi all,
I setup TSM ver 5.2 client on Win 2K that has more than 200 GB data,
But TSM server machine only 20 GB hard disk. So I configure Backuppool ---
Diskpool ---Tapepool.
Diskpool : 18 GB
High Migration Threshold : 80 %
Low Migration Threshold : 0 %.
People said when migration process is
Your disk pool is way too small.
It should be large enough to hold one night's backups
If you can't do that, set your hi mig threshold to a low value say 10 or
even lower
At 80% your backup fills up the remaining 20% of your pool faster than
migration can empty it.
nghiatd [EMAIL PROTECTED]
Nghiatd,
Have your settings before during backup:-
High Migration Threshold : 80 %
Low Migration Threshold : 25 %.
Later , after backups are complete :-
High Migration Threshold : 0 %
Low Migration Threshold : 0 %.
to allow migration to tape to take place.
Bill
nghiatd [EMAIL
I'm in a similar situation where my primary stg diskpool is not big
enough to contain a nights backups. I have the migration set to hi=0
lo=0. This means it's constantly migrating but I've 6 dedicated lto2
tape drives so isn't an issue for me.
Regards,
Iain
-Original Message-
From:
I use LTO Gen 2. Its read/write speed is 15-20 MB/s more than network speed
(100Mbps). So migration is faster than backup
- Original Message -
From: John Naylor [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Friday, March 04, 2005 5:16 PM
Subject: Re: migration and backup
Your disk
I have my reclaim=100 during the time migration from disk to tape takes
place and the backup of the tapepool, but reclaim=5 all other times.
Regards,
Iain Barnetson
IT Systems Administrator
UKN Infrastructure Operations
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL
I have 2 drive LTO Gen 2. I also try backup directly to tape, but it is
very slow
- Original Message -
From: Iain Barnetson [EMAIL PROTECTED]
To: ADSM-L@VM.MARIST.EDU
Sent: Friday, March 04, 2005 5:24 PM
Subject: Re: migration and backup
I'm in a similar situation where my primary stg
Can any one suggest how I can alter this query to show the time and also
for events between specific dates/times.
select date(start_time) as date, activity, entity, successful from
summary where successful 'YES'
Cheers.
Iain
-Original Message-
From: ADSM: Dist Stor Manager
the problem is first migration, the backup was stopped. Although, diskpool
still has 20% capacity
02/03/2005 06:22:26 A1114I Waiting for mount of offline media.
02/03/2005 06:55:37 Retry # 1 Normal File-- 719,648,279
- Original Message -
From: Iain Barnetson [EMAIL PROTECTED]
To:
So the data was migrating from diskpool to tape?
Is it an offline tape that the error relates to?
Can you check your actlog for that time and see if it mentions looking
for a specific tape at that time, then see where the tape is, if it's
set to offline: readonly, offiste, etc.
Is you tape pool
I don't think Waiting for mount of offline media message relative to tape.
It is relative to Diskpool.
I used q drive, monitor actlog and I see data still write to tape (only
one tape)
I don't set collocate for tape.
- Original Message -
From: Iain Barnetson [EMAIL PROTECTED]
To:
Was any of the diskpool volumes varied offline at the time?
Is there anything in the clients backup log around that time?
Have you subsequently managed to get a backup of that server completed
or is this an ongoing issue?
I'm wondering if it's just a case of the disk subsystem not being able
to
I use LTO Gen 2. Its read/write speed is 15-20 MB/s more than network
speed
(100Mbps). So migration is faster than backup
Maybe, but 20% of your 18gb pool is not a lot spare, and I do not think
you will get a continuous migration process anyway. It will reach zero and
then go all the way back to
In the TSM management console, reports, operational reporting; I have a
daily report setup with some custom queries.
Is there a way I can export all the queries so that I can then import
exactly the same queries into another mngt console with out having to
labouriously type them in each time.
I tried to update our nasmonthly stg ( update stg nasmonthly
ovfloc=firesafe ) to use an overflow location, but got an error saying
that overflow location is not valis with the storage pools data
format.
The nasmonthly stg data format is netapp dump.
So effectively that rules out using an
On Mar 4, 2005, at 1:31 AM, Liu, Haifeng wrote:
Just like in aix, use ESC+k or ESC+j ?
When posting an apparent client question, please help us to help you by
at least providing information about the type of platform you are
using, if not software levels.
I believe you are referring to the CLI
On Mar 4, 2005, at 1:49 AM, Liu, Haifeng wrote:
Didn't find related command
See topic Querying Copy Groups in the Admin Guide manual,
where it explains using Type=Archive as a command qualifier.
Richard Sims
On Mar 4, 2005, at 2:17 AM, Liu, Haifeng wrote:
Hi, expert, I just study tsm and didn't find the way to bound specific
management class with data,could u tell me
Refer to How Files and Directories Are Associated with a Management
Class
in the Admin Guide manual, which thoroughly explains this
I'm trying to install the ISC on a Windows 2003 server. The install goes to
about 15% when it dies. Searching through all the log files (that are
scattered all over the place!) I finally came on PortalBasicConfig.log and
this error:
[wsadmin] WASX7318E: Received exception while declaring
Hi William,
I've seen these kind of errors mainly on systems which did not have 1GB
memory. The installation dies somewhere between 15-20% with no apperent
reason, and searching through the installation log of ISC is something you
only want to do on a rainy sunday afternoon.
Richard.
An NT backup is hanging on us with these errors in the dsmerror.log file
fioScanDirEntry(): Can't map object '' into the local ANSI codepage,
skipping ...
I guess this is something to do with strange characters in the filename
but we are running up to date client (v5.1.7) and server
Hello TSMers.
I have installed TSM5.3 on W2003 and installed ISC - all ok, except that
the management console does not display
the license wizard when they have been installed. I have deinstalled and
reinstall, and they do not show . I have stopped and
restarted the TSM server and rebooted
I went thru this. Setting up a separate LibraryManagerServer that does
nothing other than handling tapes is such a benefit that it outweighs
having a small AIX machine (there is not such thing any more) doing nothing
but.
However, the transition was, to use your word, cumbersome. My first
Hi,
We're in the testing phase of our MS Exchange2003 migration and wondering if
anyone has CPU utilization statistics while restoring an Information Store
to a production Exchange 2003 Server using the Recovery Storage Group
method. Previously, we used a separate recovery server. Will
It is not necessary to run the Library Manager server on a separate
physical server. If you know how to setup multiple TSM servers on the same
AIX box, then you can just run an additional TSM server image to be the
shared library manager. We have been doing this successfully. We actually
run 4
On Fri, 4 Mar 2005, Paul Zarnowski wrote:
It is not necessary to run the Library Manager server on a separate
physical server. If you know how to setup multiple TSM servers on the same
AIX box, then you can just run an additional TSM server image to be the
shared library manager. We have
This is a Dell server, 4-way with 4GB of memory. The C: drive has over 9GB
of space available.
And actually it was a snowy, blustery Thursday afternoon in State College,
PA. These logs are scattered all over the place!
Bill
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL
Hi Steve,
As far as I've been able to tell, the License Wizard doesn't exist in 5.3.
They've finally started to update licensing to better reflect the current
state of TSM affairs. You no longer license by node, etc. At the moment,
the only way to license is by using the 'register license'
Hello All!
I am a little confused as to how I am supposed to eject cartridges from
TSM's ACSLS library? Do I update the volumes to offsite and then enter an
eject command through ACSLS or do I do a CHECKOUT LIBVOL command? Thank
you in advance for any help that you might have!
Terry,
That's done the trick, brilliant. Thanks very much for your help.
Regards,
Iain
-Original Message-
From: Terry McColgan [mailto:[EMAIL PROTECTED]
Sent: 04 March 2005 17:19
To: Iain Barnetson
Subject: RE: [ADSM-L] NetApp NAS NDMP Data
Bear with me here.
Update Stg does not
TSM Server V 5.2.4.1 on AIX 5.2
Media type LTO2
tsm: MSPTSM01q v 000192 f=d
Volume Name: 000192
Storage Pool Name: DIRLTO2
Device Class Name: LTO2DC1
Estimated Capacity (MB): 381,468.0
Scaled Capacity Applied: - Anybody know
What should be TSM Version for AIX 5.3. Or any limitations.
Thanks
Balanand Pinni
23-H-4
SBC Services Inc
OBC ,Stl MO
* 314-206-5911
* [EMAIL PROTECTED]
* 1- 800- 451- 6897
Found it 5.2.2 reference manual.
Scaled Capacity Applied |
The percentage of capacity to which a volume is scaled. For
example, |a value of 20 for a volume whose maximum capacity is
300 GB indicates that |the volume can only store 20 percent of
Found it 5.2.2 reference manual.
Thank you... not sure why I didn't look in that book too.
[EMAIL PROTECTED]
Hi Everyone!
I am trying to eject the NDMP backup tapes from our library and send them
offsite. I tried to update the access of the tapes to offsite, but it
won't let me stating that it has to be a copy storage pool volume or a
volume with devclass of server. Since I can't do either of these,
About three messages ago, someone listed the answer for you. I think what
you need is the move media command.
[EMAIL PROTECTED]
Joni Moyer [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
03/04/2005 01:44 PM
Please respond to
ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
Joni,
Not sure if what you're trying to achieve is the same as I was, but
here's what Terry McColgan suggested for me and it works perfectly
(thanks again Terry).
Use the move media command:
mov med * stg=yourpoolname wherestate=mountableinlib wherestatus=full
rem=b checkl=n ovflo=TOPDRAWER
Use the normal checkout command but add the CAP parameter. Your ACSLS admin
should be able to tell you the values to use.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Joni
Moyer
Sent: Friday, March 04, 2005 1:46 PM
To:
You can find this information at the TSM support page:
http://www-306.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageManager.html
Find the section maked Server and Client Requirements
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal
Hi Iain!
I have looked at the move media command and I believe that this is what I
want to enter if I want to send my tapes to our offsite vaulting company,
but I guess what I don't understand is what the difference is between the
remove=yes and bulk. I have an STK SL8500 library with ACSLS. If
Joni,
In all honesty I haven't thought as far as checking the moved media back
in, but I guess it'll be a case of when the 12 months that I intend
keeping the moved media is up, I'll just check the media backin as
private and TSM, knowing that it is now out of date, will change the
media to being
Stapleton, Mark wrote:
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Egon Blouder
I am running a few huge file servers (~6-9 million files,
600GB-1.2TB data, 2GB MEM). In order to enhance backup speed I
tried to set resourceutilization to a higher value (5-10).
After
Versions Data Deleted and Retain Only Version are not supported with NDMP.
The operations on pools Tape_NAS and Copy_NAS will not interfere with each
other.
You should realize that because there is no Backup/Archive client for NetApp
other than the WEB based one, the Display active/inactive
I'm just posted to CPAN a new Perl Module using DBI to access TSM Database.
I'm sure, it's work well under AIX and Linux, not sure for other
platform (I try to be portable).
If you want to test it and help me!
link http://search.cpan.org/%7Elbendavid/DBD-TSM-0.01/
Terry,
I think I've got the jist of what you're saying.
What I've got set up in my environment is:
Daily:
By admin sched a differential from day 1 of each node and subsequent
differentials daily to stg=naspool.
versions data exists - unlimited
versions data deleted - 2 days
retain extra
When you are in the customization screen for Op reporting at the top of the
screen you should see Custom Template File which tells you where the xml
file is located with all the information (c:\program
files\tivoli\tsm\console by default). As a practice, I typically do save
as and save my
52 matches
Mail list logo
