Hi,
Not being a network guru myself but I recall having 2 interfaces in the same
subnet even with different IP addresses is bad. On paper it looks all good,
as you define multiple addresses and tell the software which one to use but
in reality networks work on MAC level and TCP is just a protocol.
Eric,
you didn't tell us anything about the network layout. Let's play with some
assumptions:
-
| TSMClient | | TSM-Server |
|| | |
I'm in no way even close to understanding networking, that said, I've have
fought some issues with this kind of setup.
On the client you may need to specify a route to get the client to send over
the 10g adapter. Some duel homed unix systems will default to sending out the
adapter with the low
If you have a distinct IP for the 10 Gb connection you can use that name/IP
address in the client's TCPServeraddress value in the dsm.opt or dsm.sys file.
Use 'q n f=d' to verify that the IP is being used.
Jim Schneider
Essendant
-Original Message-
From: ADSM: Dist Stor Manager [mailto
Rick,
I would run the 8.1.1 VE version if your vSphere stack supports it, the
biggest improvements in my eyes above the 7.1 version are the restore
performance that can go 5x in the right configuration (in my experience)
and the tagging support (if you vShpere folder structure will work with it,
b
It's been reported here that the restore time in the v8.1 CLIENT is much
improved over v7 so I would recommend that one for the client. I am not sure
the server version makes a difference for this situation.
David Ehresman
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L
Hello,
Up till now we have used BA clients in VM's. We would like to look into
implementing VE. I would appreciate any wisdom on bringing it up first time.
A specific question would be which version. Our current TSM servers are
v7.1.5, but I'm wondering if bringing up a v8.1 server and VE w
Hi guys!
I have tested in the past with 10 Gb attached Linux clients and everything
worked fine, but now we will add a 10 Gb card to a host which is already
connected to 1 Gb. So this host has two possible paths to the server. How can I
make sure the TSM client uses the 10 Gb adapter only? I rea