Is it possible to delete 15 days’ worth of data from 4 nodes? Our four
exchange servers were set to the domain “standard” which has a 45 day retention
time. Our policy changed so I created a new Domain called “Exchange” which
has a 30 day retention time. I did not migrate the data to the new
Is it possible to delete 15 days’ worth of data from 4 nodes? Our four
exchange servers were set to the domain “standard” which has a 45 day retention
time. Our policy changed so I created a new Domain called “Exchange” which
has a 30 day retention time. I did not migrate the data to the new
Our exchange backups (Doing Full) are a little under 4.0 TB and they are taking
14 hours. We are using a Virtual Tape library and the bandwidth is great,
however they are just taking way to long. I also increased the Amount to 5 for
each exchange node as we have 120 drives. Does anyone have a
, 2011 3:56 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Increase speed of TDP Exchange Backups
On 13 June 2011 02:49, Leonard, Matthew wrote:
> Our exchange backups (Doing Full) are a little under 4.0 TB and they
> are taking 14 hours. We are using a Virtual Tape library and the
>
After performing a database restore some time back, whenever tapepool
reclamation runs the console shows the following error.
ANR1331E Invalid frame detected. Expected magic 53454652 sequence number
0001 server id segment id 000565601809.
ANR1330E The server has detected possibl
I'm trying to backup multiple CIFS shares and am trying to figure out the best
way. This is what we did and I would like to know if there is a better way.
We are using TSM 6.2 with a VTL.
We setup two servers SXDCTPM and SXDCTPM01 and both are registered with Tivoli
as nodes and assigned to d
On Sunday, March 16, 2014, Leonard, Matthew
mailto:matthew.leon...@atlasair.com>>
wrote:
I'm trying to backup multiple CIFS shares and am trying to figure out the
best way. This is what we did and I would like to know if there is a
better way. We are using TSM 6.2 with a VTL.
We setup
Hi,
I running TSM 6.1.4.5 and I'm looking to backup CIFS shares running from an EMC
VNXe. Can someone provide me with Step-by-step instructions for setting up
NDMP from scratch within TSM? I'm using a VTL and have one library defined.
What are the steps to setup NDMP within Tivoli and how d
Tom,
When we run into this problem, I'll run the following command after doing a q
vol > "c:/vols.txt", opening it into excel and for the tapes that have less
than 50% reclaimable I'll run the move data command (see below)
MOVE DATA "Volume_name" STGPOOL="Stroage_pool" WAIT=NO RECONSTRUCT=YES
me scratch/filling volumes available, though.
Based on what Tom said, there is no space at all available in any pool. The
first step needs to be to get some scratch tapes available, then RECLAIM/MOVE
can be a viable option.
On Mon, Apr 14, 2014 at 03:58:56PM +0000, Leonard, Matthew wrote:
> Tom,
&g
I have about 100 volumes that are defined in my storage pool as "Empty" (See
Below). How would I change the status to scratch? I've tried running "update
libvol xdcvtl VT0164L3 status=scratch" however I receive the following error:
ANR8443E UPDATE LIBVOLUME: Volume VT0164L3 in library XDCVTL ca
No there isn't...
Regards,
Matthew J. Leonard
Network Infrastructure Administrator
IT Network Operations
AtlasAir, Inc.
matthew.leon...@atlasair.com
914-701-8042
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of George
Huebschman
Sent: Wednesda
ject: Re: [ADSM-L] Relabel/checkin Tapes marked as "empty"
did you try with label libvol ?
2014-04-16 10:47 GMT-05:00 Leonard, Matthew
mailto:matthew.leon...@atlasair.com>>:
> No there isn't...
>
> Regards,
>
> Matthew J. Leonard
> Network Infras
ing for similar symptoms; maybe it's
> an issue resolved in a newer level of code than you're running. I
> vaguely think I've seen APARs for VTL issues, but since I don't have
> one, I didn't pay them much attention.
>
> =Dave
>
>
> On
then try a Q DRM for those volumes.
George Huebschman (George H.)
(301) 699-4013
(301) 875-1227 (Cell)
From:
"Leonard, Matthew"
To:
ADSM-L@VM.MARIST.EDU
Date:
04/16/14 02:30 PM
Subject:
Re: [ADSM-L] Re: Relabel/checkin Tapes marked as "empty"
Sent by:
"ADSM
this a
> > library
>
> > manager of a shared library or something like that? (I don't have
>
> > experience with that myself, though others here do. Just trying to
>
> > come up with ideas to further
>
> > investigate.)
>
> >
>
&
Trust me, we have more problems with the use of a VTL especially with
relabeling and the headers within the virtual tape being marked as in-use.
Even though Tivoli might say a volume is full, the VTL doesn't understand that
properly. We have been going back and forth with the vendor on this fo
Hello All,
I've been getting numerous failures with our Exchange Backups that are being
executed via a scheduled command as shown below. Server Version: 6, Release 1,
Level 4.5, TSM Client Version: 6.2.3.0, TDP Client Version: 6.1.3.0 all running
on Windows 2008 R2 and Exchange 2010 SP2 Roll
Hello All,
I've been getting numerous failures with our Exchange Backups that are being
executed via a scheduled command as shown below. Server Version: 6, Release 1,
Level 4.5, TSM Client Version: 6.2.3.0, TDP Client Version: 6.1.3.0 all running
on Windows 2008 R2 and Exchange 2010 SP2 Roll
Regards
2014-06-10 6:32 GMT-05:00 Leonard, Matthew :
> Hello All,
>
>
>
> I've been getting numerous failures with our Exchange Backups that are
> being executed via a scheduled command as shown below. Server
> Version: 6, Release 1, Level 4.5, TSM Client Ve
e the admin and doing a connection since de client dsmc
> using the dsm.opt
>
> Regards
>
>
> 2014-06-10 6:32 GMT-05:00 Leonard, Matthew :
>
> > Hello All,
> >
> >
> >
> > I've been getting numerous failures with our Exchange Backups that
> >
It has been a long, great journey with Tivoli and this email forum has been
very helpful, however, we just shut down our last Tivoli server and are no
longer using it.Can you please remove me from this forum? Thanks soo much
for the last 8 years!!!
Regards,
Matthew Leonard
Supervisor, Dat
Hello all,
I'm backing up exchange 2010 with four separate schedules - 4 separate command
files which each backup two databases. Works great however I would like to be
able to pull some reports via tivoli without looking through the "EXCFULL.LOG"
or "EXCHACHED.LOG" files. I can pull up the actu
gt;
> Please let me know if you want to know more.
>
> Best Regards
> Christian Svensson
>
> Cell: +46-70-325 1577
> E-mail: christian.svens...@cristie.se
> Supported Platform for CPU2TSM::
> http://www.cristie.se/cpu2tsm-supported-platforms
>
>
want to know more.
>>
>> Best Regards
>> Christian Svensson
>>
>> Cell: +46-70-325 1577
>> E-mail: christian.svens...@cristie.se
>> Supported Platform for CPU2TSM::
>> http://www.cristie.se/cpu2tsm-supported-platforms
>>
>>
_________
Från: Leonard, Matthew
[matthew.leon...@atlasair.com<mailto:matthew.leon...@atlasair.com>]
Skickat: den 27 november 2011 08:09
Till: ADSM-L@VM.MARIST.EDU<mailto:ADSM-L@VM.MARIST.EDU>
Ämne: Exchange 2010 TDP Backups - SQL reporting queries
Hello all,
I'm back
Steve, would love to get a copy of this. Question. Does it clear the logs after
each DB backup or after the entire job finishes?
Regards,
Matthew J. Leonard
On Nov 28, 2011, at 9:08 AM, "Schaub, Steve" wrote:
> In case anyone is interested, I modified our Powershell script for full
> backup
Yes, Please send me a copy. The original was definitely not working in our
environment. This would be great. Thanks.
Matthew J. Leonard
Network Administrator
AtlasAir Worldwide Holdings
Network Operations Department
matthew.leon...@atlasair.com
Office: 914.701.8715
-Original Message-
Me too. Thanks
Matthew J. Leonard
Network Administrator
AtlasAir Worldwide Holdings
Network Operations Department
matthew.leon...@atlasair.com
Office: 914.701.8715
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Schaub, Steve
Sent: Monday, No
All,
I have a question. We have a DAG Group in Exchange 2010 which we were using
the TDP PowerShell script to backup the 12 datastores within the DAG, however
the Backup would take way too long...and the logs would not clear until the
entire job was complete. So now, we created 7 separate .CM
.opt
If I did not address the problem you are having, please clarify.
Thanks,
Del
"ADSM: Dist Stor Manager" wrote on 01/04/2012
07:31:06 AM:
> From: "Leonard, Matthew"
> To: ADSM-L@vm.marist.edu
> Date:
All,
We are changing our exchange environment over to 2010 and notice that the
reports that are sent out are being sent through our old Exchange environment.
I looked in the TSM Management Console, and don't see where I could set the
exchange server. Just email address to send to. Does anyon
Information
Technology Services harold.vandeven...@da.ks.gov
(785) 296-0631
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Leonard, Matthew
Sent: Monday, March 26, 2012 1:04 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TSM 5.5.1.0 Management
Nick, Tell them one word...GOOGLE!
The main thing here is the person must contain the skillset to be able to
"troubleshoot" an issue. Some people in IT do not contain this Skill which is
difficult to have them move past. But if there is an issue that I am having
trouble with, almost any iss
34 matches
Mail list logo
