Hi there,
Eric, I have been talking to my HW colleagues and they have told me that, microcode is
updated allways as Richard mentioned.
Also, I do not even see a microchip replacement in order to update microcode.
So, I think that, the best way is to call directly to IBM HW representative.
Hi TMS'ers,
I hope someone outhere could help us with this problem.
Our customer has TSM server 4.1.5 on windows NT.
AS/400 client backing up via BRMS.
The problem is, BRMS reports an amount of data backed up (for example 2 Gb) and TSM
resports an amount completelty different (for example 12 Gb
Hi Arnaud,
Take a look on TSM performance Tuning Guide.
On that manual, you could find the following:
Recommendations for AIX, HP, Sun, NT, OS/2 Servers
System Memory (MB) Recommended BuffPoolSize(MB) RBufferPoolSize (KB)
32 2
Hi,
Take a look of TSM Device support in IBM support site (you have to be registered to
have full access).
I think you are not using the element numbers defined for your type of library.
I have found the following in IBM support site for ADIC 1000 library.
Tape drive 1 (element 800) __
Come on people Do not use the list if you have problems with your browser. :-(
I do not have problems reaching the manuals and if you have problems, TRY using
another browser.
If you have real problems, open a COMPLAINT with IBM people.
Sorry for sending this message to all the list but I
Hi Zoltan,
I am not Oracle expert too but I think I can give you some clue.
Like you should know, in Oracle 8i RMAN appeared replacing to EBU (Enterprise Backup
Utility). So, In your case, you have to install EBU (if my mind still works, I think
the last EBU version was 2.2) which is included
Hi Riaan,
I would like to share with you my experience here. I have seen how people
administering TSM server forget how important is to have planned the AUDITDB.
Just one week ago, one of our customers HAD TO execute an audit db after 3 years of
not to do it. That causes the TSM server had to
Hi Steve,
Although there are some tricks to do that, I do not think that practice is acceptable.
Why?, because data is money and, restoring data wherever you want means, in my
opinion, data traveling without control of its owner. (Do not think you are the
good one, think on people attacking
Hi Charles,
Try exporting LANG=en_US.
Hope this helps,
Rafael
---
to: Gallerson,Charles,GLENDALE,Information Technology
[EMAIL PROTECTED]
cc:
date: 8/30/2002 1:40:31 AM
subject: Error ANS0101E
Greetings,
I encountered this error while issuing dsmadmc from the AIX 4.3.3
command
Hi Thomas,
First, I think you allways should call IBM support.
Anyway, the problem you described is solved in TSM Client 4.2.2.X.
Hope this helps,
Rafael
---
to: Rupp Thomas (Illwerke) [EMAIL PROTECTED]
cc:
date: 8/26/2002 3:00:36 PM
subject: Return code 0 unknown
Dear *SM-ers,
today
Hi Rajesh,
From the manual TSM BA client installation and User's guide:
Options File
Place this option in the client system options file sys ) or the client user
options file opt ).
Syntax
DOMain all-local
domain
all-lofs
all-nfs
Hi Farren,
I have not seen unified criteria about the time spent for AUDITDB and it's normal
because, everybody has different machines, different TSM server version, different DB
sizde and log size and so on.
Anyway, i would like to give you some examples about the time spent for some of our
Hi Lindy,
I think, your linux server is not in compliance with the requeriments for a tsm 4.1
client.
Check the followinhg link:
http://www.tivoli.com/support/storage_mgr/adcllin.htm
Hope this helps.
Rafael
Madrid-spain
---
to: Crawford, Lindy [EMAIL PROTECTED]
cc:
date: 8/22/2002 3:00:05
Hi,
The following site could help you with all your solaris questions. For me is very
useful.
www.searchsolaris.com
There you can make a simple search.
Hope this helps.
Rafael
Madrid-Spain
---
to: Ramnarayan, Sean A [EDS] [EMAIL PROTECTED]
cc:
date: 8/20/2002 4:16:48 AM
subject:
get this article?
Thanks again,
Gentille
-Original Message-
From: Rafael Mendez [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, August 13, 2002 6:11 AM
To: [EMAIL PROTECTED]
Subject:re: Re: Problems with running TSM and Netbackup on the same
machine
Hi
Hi Paul,
Have you tryied disabling W2K driver?.
(Why don't you put a new question is list? )
Rafael
---
to: Paul Wright [EMAIL PROTECTED]
cc:
date: 8/13/2002 1:19:11 PM
subject: Re: Restore backupset take very long
Hoping someone might have an answer/guidance for me. We are evaluating
Hi David,
Have you checked errpt?. Do you have more than one drive?. Drives are online?
If you have more then one drive available, you should checked the value of the
parameter Mount Limit in the device class. Normally this value should equal
DRIVES.
Hope this helps.
Rafael
---
to:
Hi,
I remember I had the same question some time ago.
Thanks Wanda Prather we have a good document in: http://www.autovault.org/discus/
- Tivoli Storage Manager scripts
Disaster Recovery
--W2K bare Metal Restore
One extra tip. Read Ms article Q311141 because there is a
Hi Steve,
I have found that the error ANR0871E is solved installing a different patch level(4.1.
but, like you should know, version 4.1 is out of support.
For that reason, I suggest you to upgrade TSM server at least to 4.2.2.0.
The error with tapes, I have seen some similar cases and allways
Hi,
In my opinion (I have used Legato and TSM not Veritas) each storage product has its
advantages and disadvantages.
Legato is easy to install and configure but when you have very new devices, Legato is
not the best. Also, i do not trust in Legato support.
TSM is in my opinion the most
Hi,
This is a MS problem.
You could check the MS docs Q192657 and Q240145.
To give you a clue, maybe Ms people should delete all log files and re-ran
the incremental backup.
Hope this helps.
Rafael
---
to: Yahya Ilyas [EMAIL PROTECTED]
cc:
date: 8/1/2002 5:08:28 PM
subject: MS Exchange
Hi,
If you have a TSM server version lower than 4.1.4 you have to upgrade it.
If this is the case, remember that version 4.1 is out of support.
Regards,
Rafael
---
to: David E Ehresman [EMAIL PROTECTED]
cc:
date: 7/31/2002 10:19:59 AM
subject: ANR8925W
Is there a parm that controls the
Hi Carlos,
Firstly, I think is not recomendable that you mantain your actual TSM server version
because, like you should know, 4.1 version is out of support.
Answering to your question, you have a complete procedure of how to add an automatic
library in any Quick start
Hi Carlos,
I suggest you to increase the size of the DB too increase the Maximum Reduction to be
greater than 0.
Also, you have the option of reorganize your DB (using UNLOADDB/LOADDB ) but in my
opinion, this option should be done just in case of previous suggestion does not works.
Hope this
Hi Eduardo,
Have you tryied changing the following parameters on dsmserv.opt?:
commtimeout
idletimeout
tcpbuffsize
tcpwindowsize
I think, if you change those parameters to upper values, the error will desappears.
Hope this helps.
Regards,
Rafael
---
to: Eduardo Martinez [EMAIL PROTECTED]
cc:
!
-Original Message-
From: Rafael Mendez [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 05, 2002 9:11 AM
To: [EMAIL PROTECTED]
Subject: Daily registry backup
Hi all,
Does anyone know what is the daily registry backup?
Thanks in advance for any comment.
Rafael
Hi all,
I hope someone out there could help me with this problem that is really URGENT!.
I have a Domino 5.0.10 on AIX 4.3.3 with TDP for Domino 1.1.2
TSM server 4.2.1.7 on AIX.
The problem is, when I execute selective backups, all is working fine but, when I try
with incremental backups, the
Hi all,
I need some help with TDP for Domino on NT.
Aparently all is working well but, when we execute
domdsmc incremental * .
the last message we can see is the following:
Querying Domino for a list of databases, please wait...
We wait for hours but the backup never
Hi all,
Does anyone know what is the daily registry backup?
Thanks in advance for any comment.
Rafael
___
Obtin gratis tu cuenta de correo en StarMedia Email. !Regmstrate hoy mismo!.
Hi All there,
We are having a problem with a TSM client 4.2.1.
The error in dsmsrror.log is the following:
11/26/01 00:02:48 Attempt to free unknown pointer. Addr 30028740, File procopt
s.cpp, Line 12282
11/26/01 00:02:48 Attempt to free unknown pointer. Addr 61, File procopts.cpp,
Line
Hi all,
Does anyone have installed the 4.2.1.7 patch for TSM server?
We are planning to install this patch but we want to know if the problems on 4.2.1.6
version are fixed.
Any comments?
TIA
Rafael Mindez
Prosol Ingenierma
Madrid-Spain
31 matches
Mail list logo