Any 3494 wizards out there -
Something new every minute...
Our gripper is dead (there is a part circling an airport somewhere, waiting
to land).
At first, we just switched the library into MANUAL mode, opened the doors,
and we 2-legged robots have been responding to the mounts on the library
Wanda,
Here is Richard Sims' recommendation in this situation:
- TSM may have to be told that the library is in manual mode. You cannot
achieve this via UPDate LIBRary: you have to define another instance of
your library under a new name, with LIBType=MANUAL. Then do UPDate DEVclass
to change
...
At first, we just switched the library into MANUAL mode, opened the doors,
and we 2-legged robots have been responding to the mounts on the library
manager console.
Then a drive also died. ...
Hmmm... If the drive is in the same frame as the Library Manager, the
power supply in that frame
I get it!
Thanks...
-Original Message-
From: Ted Byrne [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 18, 2004 2:48 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM, 3494, manual mode...?.
Wanda,
Here is Richard Sims' recommendation in this situation:
- TSM may have to be told
Financial Group
Tivoli Certified Consultant
Tivoli Storage Manager v4.1
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Prather, Wanda
Sent: Thursday, March 18, 2004 2:28 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM, 3494, manual mode...?.
I get
On Wed, Jan 15, 2003 at 08:19:29AM -0800, Cook, Dwight E wrote:
Uh not reported as in the library by who ? TSM or the Library Manager
???
TSM wouldn't see the tapes. A databse search for volumes on the Library
Manager showed the tapes.
So in manual mode, once a tape is requested,
Hello TSMers.
After a breakdown of the accessor in our 3494 I had to put it in manual
mode while the CE was working on it. After the CE had done his job, I
put the 3494 back into Auto mode. But my TSM server couldn't mount any
of the volumes which I had touched in manual mode. All the volumes was
Did you allow the library to inventory? Your library may have been set to not do an
inventory audit after the doors are closed, which means any volumes you touched, would
be in
unknown locations.
bob
On Wed, Jan 15, 2003 at 03:37:59PM +0100, Emil S. Hansen wrote:
Hello TSMers.
After a
...But my TSM server couldn't mount any of the volumes which I
had touched in manual mode. ...
Using volumes in Manual Mode affects their status:
The 3494 redbook (SG24-4632) says that when volumes are used in
Manual Mode, their LMDB indicator is set to Manual Mode, as used
to direct error