Hi Everybody,
We recently had a new rack addition installed in our 3494 library this Sunday.
Since that was done, we have been getting about 75 scratch tapes since Monday
being changed from scratch to a private state because of errors reading the
label. I've checked about 30 of these tapes and
On Jul 28, 2006, at 10:21 AM, Richard Mochnaczewski wrote:
Hi Everybody,
We recently had a new rack addition installed in our 3494 library
this Sunday. Since that was done, we have been getting about 75
scratch tapes since Monday being changed from scratch to a private
state because of errors
] On Behalf Of
Richard Mochnaczewski
Sent: vrijdag 28 juli 2006 16:21
To: ADSM-L@VM.MARIST.EDU
Subject: Error reading label
Hi Everybody,
We recently had a new rack addition installed in our 3494 library this
Sunday. Since that was done, we have been getting about 75 scratch tapes
since Monday being
The following error appears when TSM loads a specified tape:Error:
ANR8353E:I/O error reading label of volume in drive.
Recommended action is to run DSMLABEL on tape but tape has valid backups on
it.
Do you know of a way to label the volume again without losing the data?
Thanks.
The following error appears when TSM loads a specified tape:Error:
ANR8353E:I/O error reading label of volume in drive.
Recommended action is to run DSMLABEL on tape but tape has valid backups on it.
Do you know of a way to label the volume again without losing the data?
Getting this error msg
:
ANR8353E:I/O error reading label of volume in drive.
Recommended action is to run DSMLABEL on tape but tape has valid backups
on it.
Do you know of a way to label the volume again without losing the data?
Getting this error msg tends to mean that you have already lost the data,
in that the tape
pool
3. Relabel the volume
Zlatko Krastev
IT Consultant
Please respond to ADSM: Dist Stor Manager [EMAIL PROTECTED]
Sent by:ADSM: Dist Stor Manager [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject:I/O error reading label of volume in drive 3580
Hi,
I have a tape drive
=
(\\.\TAPE0).=20
ANR8353E 001: I/O error reading label of volume in drive LTO =
(\\.\TAPE0).=20
ANR8326I 001: Mount LTO volume TSM001 R/W in drive LTO (\\.\TAPE0) of =
library LTOLIB within 118 minutes.=20
The other tapes are working without problems. Has someone any suggestion?
its a problem
I have a tape drive 3580. When I do a restore I receive messages below:
ANR8326I 001: Mount LTO volume TSM001 R/W in drive LTO (\\.\TAPE0) of library LTOLIB
within 118 minutes.
ANR8335I 001: Verifying label of LTO volume TSM001 in drive LTO (\\.\TAPE0).
ANR8353E 001: I/O error reading
the tape for about 5 minutes
before producing the error.
If anyone has seen this error before and has resolved it in some way or sent
a tape off to be recovered - could you please let me know what the outcome
was?
Thanks.
ANR8355E I/O error reading label for volume BKS574 in drive DRIVE03
(/dev
before and has resolved it in some way or sent
a tape off to be recovered - could you please let me know what the outcome
was?
Thanks.
ANR8355E I/O error reading label for volume BKS574 in drive DRIVE03
(/dev/rmt/11mt).
ANR1402W Mount request denied for volume BKS574 - volume unavailable
Yes :0( and it gave me the same error.
-Original Message-
From: arhoads [mailto:[EMAIL PROTECTED]]
Sent: Sunday, August 20, 2000 2:19 PM
To: [EMAIL PROTECTED]
Subject: Re: HELP - Error reading label
When you tried the move, audit, and reclaim did you change the access
mode to readonly
he outcome
was?
Thanks.
ANR8355E I/O error reading label for volume BKS574 in drive DRIVE03
(/dev/rmt/11mt).
ANR1402W Mount request denied for volume BKS574 - volume unavailable.
ANR1410W Access mode for volume BKS574 now set to "unavailable".
-Terry
]
Subject: Re: HELP - Error reading label
When you tried the move, audit, and reclaim did you change the access
mode to readonly before each of these commands?
"Barth, Terry V. (MBS)" wrote:
Hi fellow *MSrs
I need assistance on this :0)
We have a tape that receives the following
14 matches
Mail list logo